A Microtremor Survey in the Area Shocked by the ML 5.2 Salò Earthquake (North Italy): An Empirical Approach to Determine the Effects of Ground Motions

In this work, the results of a quick microtremor survey performed in the municipalities situated in the epicentre area of the Ml 5.2 2004 Salò earthquake (North Italy) are presented. The aim of this study is to understand if the large amount of damage caused by the event (about 215 million euros only in the areas near to the epicenter) is correlated more to the local surface geology conditions or to the vulnerability of ancient Italian historical centers.

A preliminary seismic zonation was carried out in 5 villages including about 30 measurements of microtremors analyzed by the Nakamura technique (hereinafter HVNR). The points of measurement were carefully selected considering sites located both near damaged buildings and over different local geology conditions (alluvium deposits, fluvial-glacial deposits, debris fans and rock). In order to strengthen the HVNR results and to evaluate the reliability of the Nakamura analysis, a comparison with spectral ratios calculated on earthquakes (hereinafter HVSR) recorded at the strong motion station of Vobarno was made. In general, the outcomes of the survey highlight a possible correlation between local geology conditions and ground motion amplification for different frequency bands. In order to check if this evidence is linked with the damage, a series of macroseismic intensity values were collected for different zones of the investigated area, and a nonparametric correlation approach was used to establish a possible correlation between damage and ground motion amplification for selected frequency bands. The results show, from a statistical point of view, that in the area surrounding the epicenter of the November 24, 2004 mainshock, the damage pattern is not strongly dependent upon the local surface geology but more correlated to the low quality of the civil structures present in the area, including old buildings of the last century.     

Generation of Multiple Earthquake Accelerograms Compatible with Spectrum Via the Wavelet Packet Transform and Stochastic Neural Networks

The principal purpose of this article is to present a novel methodology based on wavelet packet transform techniques and stochastic neural networks to generate more artificial earthquake accelerograms from available data, which are compatible with specified response spectra or the design spectra. The proposed method uses the decomposing capabilities of wavelet packet transform on earthquake accelerograms, and the learning abilities of stochastic neural network to expand the knowledge of the inverse mapping from response spectrum to coefficients of wavelet packet transform of earthquake accelerogram. This methodology results in a stochastic ensemble of wavelet packet transform coefficients of earthquake accelerograms and, they are used to the generate accelerograms applying the inverse wavelet packet transform. Finally, an interpretive example is presented which uses an ensemble of recorded accelerograms to train and test the neural network, aiming at the demonstration of the method effectiveness.     

Response Sensitivity of Highway Bridges to Randomly Oriented Multi-Component Earthquake Excitation

In two-dimensional and single axis three-dimensional finite element analyses, the ground motion incidence angle can play a significant role in structural response. The effect of incidence angle for three-dimensional excitation and response is investigated in this paper for response of highway bridges. Single-degree-of-freedom elastic and inelastic mean spectra were computed from various orientation techniques and found indistinguishable for combinations of orthogonal horizontal components. Probabilistic seismic demand models were generated for the nonlinear response of five different bridge models. The negligible effect of incidence angle on mean ensemble response was confirmed with a stochastic representation of the ground motions.     

Preparation of Engineering Geological Maps of Bam City Using Geophysical and Geotechnical Approach

Engineering geological mapping was carried out at a scale of 1:25000 in the city of Bam, located in southeastern Iran, to provide engineering geological information as a base for seismic microzonation of the city. In this study, Seismic Refraction and Vertical Seismic Profiling (VSP) surveys were employed along with boreholes in order to identify the characteristics of subsurface material in Bam city. A number of different kinds of maps of the city were prepared consisting of Iso-depth, Iso-velocity, and Iso-Poisson's Ratio maps. The study also involves trial pitting and continuous core recovery, in-situ, and laboratory tests. Borehole data, index properties of soils, and standard penetration test results were used to assess subsurface conditions. Geophysical and geotechnical data were combined to simulate geotechnical boreholes and prepare engineering geological maps to provide basic data for seismic geotechnical microzonation to facilitate in the reconstruction of the city of Bam.     

Simplified Mechanical Model to Estimate the Seismic Vulnerability of Heritage Unreinforced Masonry Buildings

Traditional or historic masonry structures occur in large populations throughout the world, particularly in preserved historical city clusters. Being non-engineered and aging these structures are in urgent need of assessment and seismic repair/rehabilitation. However, traditional masonry presents important challenges to computational modeling, owing to complexity of structural system, material inhomogeneity, and contact interactions that collectively can only be addressed through detailed 3D nonlinear representation. In this article, a simple performance assessment model is developed in order to address the need for preliminary assessment tools for this class of structures. The objective is to be able to rapidly identify buildings that are at higher risk in the event of a significant earthquake, potentially justifying a second round of more detailed evaluation. The proposed model defines the characteristics of a Single Degree of Freedom representation of the building, formulating consistent 3D shape functions to approximate its fundamental mode of vibration considering both in-plane and out-plane wall bending as a result of insufficient diaphragm action. Parametric expressions for the dynamic properties are derived in terms of the important geometric, material, and system characteristics, and are used to express local demand from global estimates. Acceptance criteria are established both in terms of deformation and strength indices to guide retrofit. An application example of the proposed assessment methodology is included to demonstrate the ability of the model to reproduce the essential features of traditional masonry buildings under seismic action.     

IIR Compensation in Real-Time Hybrid Simulation using Shake Tables with Complex Control-Structure-Interaction

This article considers the use of actuator compensation in real-time hybrid simulation (RTHS) containing experimental substructures with complex control-structure-interaction (CSI). The existence of CSI in shake table testing is derived using theoretical relations. An infinite-impulse-response (IIR) compensator is developed to compensate for the shake table time delay as well as the effects of CSI. The efficacy of the IIR compensator is verified through numerical and experimental investigations of substructure shake table testing completed at Johns Hopkins University. IIR compensation is not limited to substructure shake table testing, and the concept is applicable to any RTHS that suffers from complex CSI.     

Performance of Structures in the Mw 6.1 Mae Lao Earthquake in Thailand on May 5, 2014 and Implications for Future Construction

An M_w 6.1 earthquake struck northern Thailand on the 5^th of May 2014. The epicenter was located near Mae Lao district in Chiang Rai province. The earthquake caused unprecedented damage to structures, the most damaging earthquake ever in recorded Thai history. Five hundred and ninety-four buildings out of 10,863 were damaged to the extent that they were unsafe for occupancy. This article presents a reconnaissance investigation of damage to buildings and bridges in the two districts—Phan and Mae Lao—which suffered the most damage. Attention is paid to the performance of buildings with similar configurations and structural design, but with different layout of unreinforced masonry infills as non-structural components.     

Relationships between Modified Mercalli Intensity and Engineering Ground-Motion of the Earthquakes in Persia

New empirical relationships between modified Mercalli intensity (MMI) and engineering ground acceleration (PGA) of the earthquakes were generated for the Iranian territory. MMI and PGA values were gathered from 16 large earthquakes. We derived two sets of relationships which predict MMI in terms of PGA; each developed using both horizontal and three components of accelerograms. The first set is independent of earthquake magnitude and epicentral distance. Better results were observed when magnitude and epicentral distance conditions were included into equations. They might be used for both rapid assessments of ground shaking and also mapping damage potential in Iran and neighboring area.     

Constant Ductility Energy Factors for the Near-Fault Pulse-Like Ground Motions

This study is focused on the constant ductility energy factors for bilinear system under the near-fault pulse-like ground motions. The variation of energy factors is studied in consideration of the earthquake magnitude, rupture distance, damping ratios, and post-yield stiffness ratios. The results indicate that the near-fault pulse-like ground motions would increase the energy dissipation of structures. The energy factors are significantly influenced by the earthquake magnitude. The damping ratios have more obvious influences on the energy factors than the post-yield stiffness ratios. A predictive model is proposed for the application of constant ductility energy factors for near-fault pulse-like ground motions.     

Seismic Damage to Structures in the 2015 Nepal Earthquake Sequences

The 7.8 Mw Gorkha earthquake struck the east of Lamjung in Nepal, followed by a sequence of powerful aftershocks. Chinese Team Six including the authors inspected the seismic damage to civil structures along 10 paths in densely populated areas with a seismic intensity of VII to IX, 40 days after the main shock. The damage was categorized according to structure types and described in detail. Several conclusions are made: powerful aftershocks can significantly affect the failure patterns; geological conditions, structure types, and height have great influence on the level of damage; and the local risky retrofitting technique needs improvement badly.