A Static Nonlinear Procedure for the Evaluation of the Elastic Buckling of Anchored Steel Tanks Due to Earthquakes

Ground-supported steel tanks experienced extensive damage in past earthquakes. The failure of tanks in earthquakes may cause severe environmental damage and economic losses. This study deals with the evaluation of the elastic buckling of above-ground steel tanks anchored to the foundation due to seismic shaking. The proposed nonlinear static procedure is based on the capacity spectrum method (CSM) utilized for the seismic evaluation of buildings. Different from the standard CSM, the results are not the base shear and the maximum displacement of a characteristic point of the structure but the minimum value of the horizontal peak ground acceleration (PGA) that produces buckling in the tank shell. Three detailed finite element models of tank-liquid systems with height to diameter ratios H/D of 0.40, 0.63, and 0.95 are used to verify the methodology. The 1997 UBC design spectrum and response spectra of records of the 1986 El Salvador and 1966 Parkfield earthquakes are used as seismic demand. The estimates of the PGA for the occurrence of first elastic buckling obtained with the proposed nonlinear static procedure were quite accurate compared with those calculated with more elaborate dynamic buckling studies. For all the cases considered, the proposed methodology yielded slightly smaller values of the critical PGA for the first elastic buckling compared to the dynamic buckling results.     

Numerical Fragility Analysis of Vertical-Pile-Supported Wharves in the Western United States

This study develops seismic fragility curves for vertical-pile-supported wharves commonly found in the western United States. Nonlinear time-history analyses of a two-dimensional numerical model under two ground motion suites are performed. The results show that the jumbo container cranes increase by 10.8% in the wharf deck drift. By using the experiment-based limit states, the proposed fragility curves demonstrate that, at a PGA of 0.50 g, the probabilities of exceeding slight, moderate, extensive, and complete limit states are approximately 23.0%, 7.0%, 4.0%, and 3.0%, respectively, while at a PGA of 1.00 g, the exceeding probabilities increase to 44.0%, 19.0%, 14.0%, and 11.0%, respectively.     

Numerical Evaluation of Topographic Effects at the Nicastro Ridge in Southern Italy

Numerical site response analyses were carried out on the Nicastro ridge in Southern Italy in order to investigate topographic effects. First, the analyses were carried out on a simplified model by employing simple artificial signals, in order to get preliminary physical insights into the two-dimensional phenomena involved. Then, numerical analyses were carried out on a more realistic heterogeneous subsoil model developed on the basis of geotechnical and geophysical investigations. Real accelerograms were selected for these analyses. Particular attention was devoted to separating topographic from stratigraphic amplification. Finally, the topographic amplification factors were compared with literature data and Eurocode 8 recommendations.     

A Modified Capacity Spectrum Method with Direct Calculation of Seismic Intensity of Points on Capacity Curve

A direct methodology for solving the seismic intensity of each point on the capacity curve is proposed. By utilizing the procedure, a continuous curve between the structural response and the seismic intensity, the structural response function, can be easily generated. Unlike previous procedures that search for the performance point of a determined seismic intensity, the proposed methodology easily draws the full curve without iterations. The procedure is applicable to both a smooth design spectrum and an actual response spectrum. Examples indicate the methodology is accurate and fast, and convenient to be combined with existing procedures, such as Modal Pushover Analysis.     

Choices and Criteria for Seismic Strengthening

Risk assessment is affected by large uncertainties, depending on hazard, structure, damage, and loss analysis. Crucial problems and choices may refer to: (a) hazard parameters, including the definition of appropriate ground motion levels and of their probability to occur; (b) level of knowledge about materials, geometry, detailing; (c) assessed damage and failure modes; and (d) resulting potential for step changes in performances.

The cost of attaining a high level of knowledge may significantly reduce the remaining resources, it is therefore important to favor resilient solutions with a creative adoption of appropriate strengthening strategies.

In this framework, this article discusses the possible criteria for the mitigation of seismic risk and some of the alternative choices that may be adopted for strengthening, with reference to:

(a)?the modification of damage and collapse modes strengthening individual elements or locallyincreasing the deformation capacity;

(b)?the insertion of additional systems resisting to horizontal actions;

(c)?the introduction of base isolation, with the objective of capacity-protecting the existingstructure;

(d)?the reduction of displacement demand by added damping or introducing tuned masssystems.

Alternative strengthening choices lead to different protection levels and imply different performances that are, in general, represented by non linear or step functions of a cost parameter of the intervention. From these considerations, conceptual “structure driven” strengthening criteria, based on a logical use of resources, are discussed.     

Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads

In the last decades, particular attention has been paid to the seismic vulnerability of existing reinforced concrete buildings designed for gravity loads only. Such buildings, designed before the introduction of capacity design in modern seismic codes, are very common, particularly in seismic prone countries of the Mediterranean area. Due to poor detailing and lacking of capacity design principles, high vulnerability has been highlighted in several past studies. In this article, inadequate seismic response and peculiar damage pattern are investigated by means of shake table tests performed on a 1:2 scaled 3-story infilled prototype. Particular attention is given to the role of beam-column joints and frame-panel interaction. The effectiveness of the EC8-based assessment approach is then evaluated; both linear and nonlinear numerical models, with different levels of sophistication, have been implemented in order to explore their behavioral aspects.     

DEFORMATION-CONTROLLED EARTHQUAKE-RESISTANT DESIGN OF RC BUILDINGS

A procedure for deformation-controlled, or displacement-based, seismic design of multistorey RC buildings is proposed, implemented and applied for the full design of a four-storey RC structure. It is integrated into the overall structural design, along with the design for the non-seismic actions and consists of a ULS verification against the conventional strain limits for a frequent “serviceability” earthquake and of proportioning the compression reinforcement and the transverse reinforcement of critical regions of members to meet the member peak inelastic chord rotation demands under the “life-safety” seismic action. Quantitative rules and expressions are proposed for the estimation of (a) mean and upper-characteristic peak inelastic chord rotation demands, through appropriate linear-elastic analyses, and (b) mean and lower-characteristic values of member ultimate chord rotations, in terms of member geometric and material data.     

‘It broadens your view of being Basque’: identity through history,branding, and cultural policy

The purpose of the paper is to address what is the impact of the synthesis between Basque history, branding identity and Law 8/1994 on Basque identity in the homeland and Diaspora. Naturally occurring brands combine history, anthropology, sociology, and marketing to explain the phenomenon of communities defined by a sense of place. Focusing on both the Basque Country and Basques in Boise, Idaho as one case study, the authors discuss how the naturally occurring brand and cultural policy of the Basque people became formalized 20?years ago with Law 8/1994. The article addresses who the Basques are and how they have branded themselves through language, place, industry, food, drink, and culture. Similarities to other communities are explored so that other ethnic/cultural communities can learn from this Diaspora cultural policy discussion.     

STRUCTURAL CONTROL ALGORITHMS IN EARTHQUAKE RESISTANT DESIGN

The dynamic finite element equations of a two-dimensional structure made of axial-flexural frame elements with tendon-driven actuators have been derived. A critical review of classical optimal control theory is made with respect to its application to the control of structure under seismic excitations. Seven control algorithms, including two newly proposed algorithms, have been described, investigated and discussed. The need of an optimal observer, Kalman filter, is discussed. The validity of separation theorem applicable to the optimal stochastic control of structure for earthquake resistance is shown. How the control system perform under the circumstances of actuator saturation is also shown. Several numerical examples are worked out to demonstrate and compare the efficiency and limitations of those control algorithms.     

近十年来中国人口迁移研究及其评价

本文对20世纪90年代以来的中国人口迁移研究进行了总结与评价。文章首先概述了近10年来中国人口迁移研究的主要特点;然后对中国人口迁移研究的主要内容即迁移人口的社会经济特征,人口迁移的空间格局,影响因素,作用,人口迁移政策建议以及人口迁移研究中的理论与方法等方面进行了总结;最后指出了人口迁移研究中存在的问题与未来应该加强研究的领域。