Inelastic Displacement Response of RC Systems with Cyclic Deterioration—An Energy Approach

Inelastic displacements of reinforced concrete systems are investigated by employing an energy-based approach. A hysteresis model is developed that accounts for stiffness degradation, strength deterioration and pinching. The model is calibrated by using experimental data from literature. Inelastic displacement ratios are calculated under a specific set of ground motion records with long effective durations. The results reveal the importance of deteriorating behavior under long duration excitations, especially for short and medium period structures. The last part of the study is devoted to the introduction of a simple empirical relationship for estimating the inelastic displacement demands of degrading RC structural systems.     

Multiple Degrees of Freedom Positioning Correction for Hybrid Simulation

This study proposes a high-precision positioning correction method for multiple degree-of-freedom loading units in hybrid simulation. These loading units can impose inaccurate displacements to the specimens due to the elastic deformation at the reaction wall or connections. To compensate for these displacement errors, an online correction method adjusts the displacement command by the difference between the target and achieved displacement. This correction method also accompanies an accurate 6DOF monitoring system to detect the displacement errors. Two examples of hybrid simulation tests are provided to demonstrate the precise displacements attained on the specimens through this control method.     

Seismic Response of Base-Isolated Benchmark Building with Variable Sliding Isolators

The seismic response of base-isolated benchmark building with variable sliding isolators like variable friction pendulum system (VFPS), variable frequency pendulum isolator (VFPI), and variable curvature friction pendulum system (VCFPS), along with conventional friction pendulum system (FPS), was studied under the seven earthquakes. The earthquakes are applied bi-directionally in the horizontal plane ignoring vertical ground motion component. The shear type base-isolated benchmark building is modeled as three-dimensional linear elastic structure having three degrees of freedom at each floor level. Time domain dynamic analysis of the benchmark building was carried out with the help of constant average acceleration Newmark-Beta method and nonlinear isolation forces was taken care by fourth-order Runge-Kutta method. The base-isolated benchmark building is investigated for uniform isolation and hybrid isolation in combination with laminated rubber bearings through the performance criteria and time history response of important structural response parameters like floor accelerations, base displacement, etc. It is observed that variable sliding isolators performed better than conventional FPS due to their varying characteristic properties which enable them to alter the isolator forces depending upon their isolator displacements thus improves the performance of the structure. The VFPS efficiently controls large isolator displacements and VFPI and VCFPS improve super structural response on the cost of isolator displacement. It is also observed that the hybrid isolation is relatively better in comparison to the uniform isolation for the benchmark building.     

Direct Displacement-Based Design of Glulam Timber Frame Buildings

We introduce a direct Displacement-Based Design methodology for glued laminated timber portal frames with moment-resisting doweled joints. We propose practical expressions to estimate ultimate target displacement and equivalent viscous damping, and we demonstrate that these expressions provide prior values that are close to those obtained a posteriori using a more refined model. Applied to case studies, the method yields base-shear forces lower than those obtained using the force-based approach of Eurocode 8. This is due to the high dissipation capacity of the specific connection technology, which apparently is conservatively accounted for in the q-factor of Eurocode 8.     

Displacement-Based Seismic Design Approach for Prestressed Precast Concrete Shear Walls and its Application

ABSTRACT

Prestressed precast concrete shear wall (PPCW) is a new kind of shear wall utilizing a combination of unbonded post-tensioning steel and mild steel for flexural resistance across horizontal joints. A simple procedure of direct displacement-based design approach for PPCW based on concept of inelastic design spectra is proposed. Section design is then carried out according to base overturning moment. A detailed design example demonstrating a step-by-step application of the design procedure is also provided. Nonlinear time-history analysis verified that this approach is applicable to control the target displacement to the performance acceptable limit.     

Diffraction around a Semi-Parabolic Canyon in an Elastic Half-Space by Out-of-Plane SH-Waves,II: Rocking and Resultant Rotations

This paper is the second of the two papers, discussing the rocking and resultant component of rotations, with the torsional components of motions presented earlier in the first paper for the case of out-of-plane SH waves excitation on a semi-parabolic canyon. The rotational motions are gaining importance in recent years in the field of strong-motion seismology and earthquake engineering. Many previous papers on out-of-plane SH waves excitation presented the associated torsion rotational motions, when in fact there is also a rocking rotational component of motions. Both the rocking and torsion rotational motions, in as much as the translational motions, had shown to play an important role in structural responses, even though rotations are not incorporated into building design codes at present. Studying the rotational motions can thus help to a better understanding of the behavior of surface topographies that are in the vicinity of structures in the event of seismic excitation. This paper included, besides the additional rocking motions, also the resultant rotational motions combining torsion and rocking.     

Seismic Protection of the Piers of Integral Bridges using Sliding Bearings

Seismic resilience and continued operation of bridges after earthquakes are important seismic design criteria. A new seismic protection concept for integral bridge piers is explored that uses sliding bearings to separate the superstructure from the piers. The influence of sliding bearings on the seismic response of a representative 3-span integral highway bridge is investigated. With sliding bearings, the pier column shear force was limited to the bearing design friction force. Furthermore, the abutment ductility demands were found to be insensitive to the friction forces in the sliding bearings because the bridge displacement demands were controlled by the equal displacement rule.     

Articulated sovereignty: Extending Mozambican state power through the Great Limpopo Transfrontier Park

Since its inception in 2001 and subsequent integration into the tri-national Great Limpopo Transfrontier Park (GLTP), Mozambique's Limpopo National Park (LNP) has been progressively transformed into a functioning wildlife park. Standing behind this transformation has been a profound expansion of Mozambican state power over and through the park. While this reinforces predictions in the early transfrontier conservation literature, it stands in tension with observations that these projects threaten state power. I address this tension by developing the concept of articulated sovereignty, which understands sovereignty as a heterogenous set of powers that are produced through often unequal interactions with other actors, including foreign or extra-territorial actors. In short, sovereignty is articulated through these interactions. I draw from this to show that the same partnerships that seem to threaten sovereignty in some respects in fact shore up the power of the Mozambican state in other respects. I focus in particular on the foreign-assistance-enabled extension of state power through the development of legal and technical capacity, park administration and infrastructure, a ranger force, and the relocation of communities beyond park borders. I additionally draw on articulated sovereignty to show that the state and territory, like sovereignty, are built through various articulations with extra-territorial partners, thus drawing into question the sovereignty-state-territory triad. I close by reflecting on the utility of articulated sovereignty beyond the realm of conservation. In short, articulated sovereignty sheds light on both the sovereignty complexities of transfrontier conservation projects like the LNP/GLTP and how sovereignty actually plays out in the world.     

Nonlinear Static Methods vs. Experimental Shaking Table Test Results

Three different Nonlinear Static Methods (NSM's), based on pushover analysis, are applied to a 3-story, 2-bay, RC frame. They are (i) the Capacity Spectrum Method (CSM), described in ATC-40, (ii) the Displacement Coefficient Method (DCM), presented in FEMA-273 and further developed in FEMA 356, and (iii) the N2 Method, implemented in the Eurocode 8. Pushover analyses are conducted with DRAIN-3DX by using four different lateral force distributions, according to the acceleration profile assumed along the height of the structure: uniform, triangular, modal-proportional, and multimodal fully adaptive. In the numerical model, RC members are modeled as fiber elements.

The numerical predictions of each method are compared to the experimental results of the shaking table tests carried out on two similar 1:3.3-scale structural models, with and without infilled masonry panels, respectively. The comparison is made in terms of maximum story displacements, interstory drifts, and shear forces. All the NSM's are found to predict with adequate accuracy the maximum seismic response of the structure, provided that the associated parameters are properly estimated. The lateral load pattern, instead, is found to little affect the accuracy of the results for the three-story model considered, even if collapse occurs with a soft story mechanism.     

A Simplified Drift-Based Assessment Procedure for Regular Confined Masonry Buildings in Seismic Regions

This article presents a simplified procedure for assessing the seismic performance of existing low-to-medium rise confined masonry (CM) buildings, which are a typical construction type in Latin-America. The procedure consists of the estimation of the peak roof and first-story inelastic drift demand of CM buildings. The expected peak inelastic displacement demand is related to drift-based fragility curves, which express the probability of being or exceeding two key damage states in the masonry panels, developed from a relatively large experimental database. The proposed procedure could be very useful for obtaining rapid estimates of expected performance during future earthquake events and for assessing the seismic vulnerability of regular confined masonry structures.