BRONZE AGE CHILDHOOD MIGRATION OF INDIVIDUALS NEAR STONEHENGE,REVEALED BY STRONTIUM AND OXYGEN ISOTOPE TOOTH ENAMEL ANALYSIS*

Contrasting lifestyles are recorded by the isotope composition of Bronze Age Beaker people (c. 2500–2000 bc ) from three burial sites (Boscombe Down, Normanton Down and the ditch around Stonehenge) at or near to the Stonehenge monument in Wiltshire, southern England. Seven individuals (three adults, a sub‐adult, two juveniles and an infant) were recovered from a single grave at Boscombe Down. Strontium and oxygen isotope analysis of tooth enamel from two teeth (a premolar and third molar) from each of three of the adults in this grave (referred to as Boscombe Bowmen) show that they had all shared a pattern of mobility and migration during their lives. The three adult males spent their early childhood (as represented by data from the premolar teeth) in an area with a radiogenic ⁸⁷Sr/⁸⁶Sr isotope signature of around 0.7135. They each then moved, during early adolescence (as represented by the third molar results), to a less radiogenic area, where they acquired an ⁸⁷Sr/⁸⁶Sr signature of around 0.7112. This implies that they must then have travelled to the Stonehenge area of Wiltshire at a later time in their lives. Wales provides the closest area with rocks that supply suitable ⁸⁷Sr/⁸⁶Sr ratios and δ¹⁸O isotope compositions for these individuals, although other areas of Palaeozoic rock, such as Scotland and parts of Europe, cannot be ruled out. Enamel from the two juveniles from the Boscombe Down burial yields ⁸⁷Sr/⁸⁶Sr ratios of 0.7098 and 0.7099, and strontium concentrations for both of 55 ppm. The very close match of the data for the two juveniles supports the possibility that they were raised in the same environment. The difference in strontium isotope data between the juveniles and three adult males described above shows that the children did not come from the same homeland as the adults with whom they share a grave. The two adult males from the single burials at Normanton Down, and from Stonehenge itself, had static lifestyles and show no evidence of migration, in contrast to the Boscombe Bowmen. Their oxygen and strontium data are consistent with a childhood in the Stonehenge area.     

Integrated geophysical surveys at the archaeological site of Tindari (Sicily,Italy)

The results of geophysical survey carried out at the archaeological site of Tindari, located 70 km west-north-west of Messina (Sicily, Italy), are presented and discussed. The site is one of the most important archaeological sites, about 90 ha large, on the north-eastern side of Sicily and it was one of the last Greek settlements in Sicily. Keeping in mind the vastness of the site, according to the archaeologists an area, of about 1200 m² was selected, for a geophysical survey. Electrical resistivity tomography (ERT), including induced polarization (IP) measurements, and seismic refraction tomography were applied in the course of geophysical exploration in the area. The objective of this preliminary geophysical investigation was to verify the effectiveness of the technique for a spatial definition of the buried archaeological structures (mostly walls, columns, etc.) to determine their characteristics and to study the presence of collapsed columns within the zone of archaeological interest, in view of their application in the rest of the site, that, for obvious reasons, could not be entirely excavated in brief times. The geophysical data, visualized in 3D space, revealed a distribution of low-contrast shallow anomalies that indicate the presence of different types of buried structures in the surveyed area. Also, the probable accumulations of collapsed columns could be determined. These results confirm the hypothesis of a large northern extension of the archaeological site and provide useful information to design a more efficient excavation plan.     

Structured light scanning for high-resolution documentation of in situ archaeological finds

Archaeologists strive to document the process of excavation and discovery as completely as possible. Over the past several decades archaeologists have incorporated a growing number of computerized techniques for documenting archaeological finds. Scanning is one such technique. There are a number of technologies that now allow archaeologists to scan structures, excavation surfaces and in situ artifacts to create high-resolution, 3D data sets. We report here on a trial application of one of these, a structured-light scanner, to create 3D representations of excavated surfaces and associated artifacts at two Middle Paleolithic sites in southwest France. In each instance, surfaces of approximately 2.5 m² were scanned in approximately 1 day. The resulting data sets are very good representations of the originals in terms of colors and spatial details, and as such provided an important piece of archaeological documentation. To use this equipment successfully in the field, however, required solving a number of logistical issues, and the amount of time required to learn to use this equipment was significant. Once these issues are addressed, this technology is appropriate for documenting extraordinary, unique finds where time and costs are offset by the importance of good documentation.     

Coevolution and coordination: a systemic analysis of the Taiwanese information technology industry

The ‘evolutionary turn’ in economic geography hasled to increasing emphasis on coevolution among technologies,organizations and territories. The weakness of this approach,however, is a focus on broad coevolutionary pictures that payslittle attention to coordination processes that guide interdependentactions on the ground. Using the Taiwanese information technologyindustry as an example, this article suggests an industrialsystem analysis that gives a structural coherence to a seriesof intentional, collective actions. Such a systemic measurehas the potential to extend the evolutionary analysis beyondbroad coevolutions to the strategic transformations of industrialorganizations.     

Three-dimensional image of seismic refraction tomography and electrical resistivity tomography survey in the castle of Occhiolà (Sicily,Italy)

A geophysical survey was carried out at the ruins of Occhiolà Castle (Sicily, Italy), a medieval village located at the north-western part of a hill named “Terravecchia” at 491 m asl. In order to map the archaeological structures (such as walls and burrows), Electrical resistivity tomography (ERT) and seismic-refraction tomography methods were used. The resistivity variations are known to correlate quite well with the lithology, thus providing important information for identifying the buried archaeological remains. On the other hand, seismic velocity variations provide information about the geometrical features of the remains. The two geophysical methods are used in an enjoined way to better aid the interpretation and evaluate the significance and reliability of the results obtained with each single method. The electrical and seismic data are displayed in three dimensions by using the iso-resistivity and iso-velocity surfaces, respectively. This allows us to effectively define the location of the anomalies present in the single electrical and seismic sections. The results obtained in the survey highlight the presence of structures of regular shape, probably due to features of archaeological interest.     

Modeling ground slate knife production and implications for the study of household labor contributions to salmon fishing on the Pacific Northwest Coast

Despite longstanding anthropological concerns with the origins of intensive delayed-return subsistence economies and the timing of the development of increasingly complex political systems on the Northwest Coast, the use and production of slate knives—one of the most archaeologically visible tools used to process seasonally available salmon—has received little attention in the archaeological literature. This can be attributed, in part, to the persistence of artifact typologies that have failed to generate behavioral implications for variability in slate artifact assemblages. In this article, I use data derived from ethnographic, experimental, and actualistic research to develop an approach to the classification of slate artifacts expected of knife-production activities. Emphasis is placed on framing slate knife production as a temporally emergent and situated activity, but also as an operational sequence that can be modeled due to regularity in the decisions and motions expected of tool makers producing functionally specific tools. Using slate assemblages recovered during the partial excavation of seven Late and Contact period Coast Salish houses in southern British Columbia, I then evaluate and demonstrate the utility of this approach by considering variability in household labor contributions to salmon fishing.     

The IJsselcog project: from excavation to 3D reconstruction

The 15th‐century IJsselcog was lifted in 2016 from the river IJssel near Kampen (the Netherlands). From stern to bow and from starboard to portside about 70% of the original wooden hull is preserved. The combined approach of analogue documentation and photogrammetry enabled the research team to reconstruct the original ship in 2D and 3D, followed by a comprehensive study of its nautical characteristics. The hull volume and height were maximized by the shipbuilders using previously unknown construction elements in cogs, such as wales and vertical riders; shipbuilding traits that are generally applied to 16th‐ and 17th‐century carvel‐built cargo ships.     

Sustainability Policy Research: A Review and Synthesis

This paper reviews theoretical and empirical approaches drawn from influential journal articles and books on sustainability policy published over the last 10 years (2007 through 2017). Due to the widespread application of sustainability as a concept and space limitations, the paper more narrowly focuses on sustainability research in three critical policy areas: climate change, urban development, and agroecology and food systems. Drawing from information provided primarily by citation indexes, the study identifies and analyzes the research literature related to sustainability in these three fields. Future theoretical and empirical research approaches that can better integrate and connect the current diffuse and incongruent literature on sustainability are discussed in the paper. The findings of the literature review generate a number of possible future research directions that are discussed in the study.     

Significance and Limitations of Stable Oxygen Isotope Ratios in the Apatite Phosphate of Archaeological Vertebrate Finds for Provenance Analysis in an Alpine Reference Region

A multi‐isotope fingerprint consisting of δ¹⁸O_phosphate, ⁸⁷Sr/⁸⁶Sr, ²⁰⁸Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁸Pb/²⁰⁷Pb and ²⁰⁶Pb/²⁰⁷Pb was established in the bioapatite of 219 individual archaeofaunal remains (cattle, pig, red deer) excavated from sites located along a specific transect of the European Alps, namely the Inn–Eisack–Adige–Brenner Passage, that has been of eminent importance since European prehistory. This reference area is vertically stratified, and since δ¹⁸O in the skeleton is influenced by climate, water source, physiology and even culture, we tested the relative contribution and importance of δ¹⁸O as a component of the multi‐isotope fingerprint for provenance analysis in this alpine region by a novel mathematical approach. In particular, we adapted a supervised learning approach through expectation–maximization (EM) clustering for fingerprint extraction and evaluated the contribution of each isotopic ratio to the data structure. While an altitude effect was evident in δ¹⁸O, its overall structural importance in the complete isotopic fingerprint was rather low. Therefore, provenance analysis of bioarchaeological finds in this region is possible by measuring stable Sr and Pb ratios alone, which is of considerable importance when δ¹⁸O values are not available, e.g., in cremated finds, although some information is lost. Whether this is tolerable depends on the scientific question to be solved.     

Radiocarbon Dates from the Oxford AMS System: Archaeometry Datelist 35

This is the 35th list of AMS radiocarbon determinations measured at the Oxford Radiocarbon Accelerator Unit (ORAU). Amongst some of the sites included here are the latest series of determinations from the key sites of Abydos, El Mirón, Ban Chiang, Grotte de Pigeons (Taforalt), Alepotrypa and Oberkassel, as well as others dating to the Palaeolithic, Mesolithic and later periods. Comments on the significance of the results are provided by the submitters of the material.