Design Principles for Minimum Torsional Response of Wall-Frame Concrete Structures

A seismic design procedure is described incorporating the well-accepted property that the stiffness of reinforced concrete elements is strength dependent and the requirement that the method of assigning strength to elements should be aiming at minimum torsional phenomena. Such a response allows a direct comparison with the findings of a static nonlinear analysis, which may provide the limits of story drifts and the induced plastic rotations in potential plastic hinges. The requirement of a practically translational response implies that the element strength assignment should be based on planar considerations and the initially elastic response should be of minimum torsion.     

Use of Pushover Analysis for Predicting Seismic Response of Irregular Buildings: A Case Study

Structural irregularity undermines capability of conventional methods for 2D pushover analysis to closely approximate results from inelastic dynamic analysis. In recent years, different methods have been developed to overcome such limitation and their suitability has been checked with reference either to idealized building models or to geometrically simple tested structures. In this paper, suitability of one such method, proposed by Fajfar et al. [2005] Fajfar, P., Maru?i?, D. and Perus, I. 2005. Torsional effects in the pushover-based seismic analysis of buildings. Journal of Earthquake Engineering, 9(6): 831–854. [Taylor & Francis Online], [Web of Science ®] , [Google Scholar], is evaluated considering an existing school building which presents both vertical and plan irregularities. Types of irregularity encompass not only those usually considered by seismic codes but also those deriving from a bad conceptual design and construction inaccuracies, very frequent at the year of construction (1974). It is found that, even under such complex irregularity conditions, this ‘modified’ pushover analysis correlates well results from inelastic dynamic analysis almost up to failure, since, in most cases, its predictions of interstorey drifts and plastic rotations are conservatively close to values from inelastic dynamic analysis. Even failure mechanism, consisting of a floor mechanism at the third level, is correctly predicted, thus demonstrating adequacy of such method for actual framed structures.     

Ductility of a Structural Wall with Spread Rebars Tested in Full Scale

The experimental work focuses on the ductility of the reinforced concrete (RC) seismic structural walls in buildings of mid-rise height. A full-scale five-story structural wall was tested to obtain results, still scarce in literature, without the influence of size effect. An unusual detailing with large diameter longitudinal rebars uniformly distributed in the wall length was adopted to prevent premature web rebar fracture and shear sliding. The plastic hinge length and deformations were evaluated in detail. The results show the high ductility of the wall that reached a total drift of 2.5%, larger than those usually required in design.     

General Seismic Load Distribution for Optimum Performance-Based Design of Shear-Buildings

An optimization method based on uniform damage distribution is used to find optimum design load distribution for seismic design of regular and irregular shear-buildings to achieve minimum structural damage. By using 75 synthetic spectrum-compatible earthquakes, optimum design load distributions are obtained for different performance targets, dynamic characteristics, and site soil classifications. For the same structural weight, optimum designed buildings experience up to 40% less global damage compared to code-based designed buildings. A new general load distribution equation is presented for optimum performance-based seismic design of structures which leads to a more efficient use of structural materials and better seismic performance.     

Experimental Evaluation of Seismically and Non-Seismically Detailed External RC Beam-Column Joints

An experimental investigation was undertaken to study the seismic performance of external reinforced concrete (RC) beam-column joints having representative details for mid-rise RC frame buildings in developing countries such as Iran that were designed and constructed prior to the 1970s. Three half-scale external RC beam-column joints were tested by applying lateral cyclic loading of increasing amplitudes. Tested specimens were comprised of one unit having seismic reinforcement detailing in accordance with the seismic requirements of ACI 318-11, and two units having non-seismic reinforcement detailing in accordance with the 1970s construction practice in many developing countries, such as Iran. Two typical defects were considered for the non-seismic units, being the absence of transverse steel hoops and insufficient bond capacity of beam bottom reinforcing bars in the joint region. Test results indicated that the non-seismically detailed specimens had a high rate of strength and stiffness degradation when compared to the seismically detailed specimen, which was attributed primarily to the joint shear failure or bond failure of the beam bottom bars. The non-seismically detailed specimens also showed a 30% reduction in both average strength and ductility and a 60% loss of energy dissipation capacity in comparison to the seismically detailed specimen.     

历史撰述的批判与总结——王鸣盛论史书体裁与体例的利弊得失

我国古代杰出的史学评论家 ,无不重视对历史撰述的得失进行批判和总结。作为乾嘉史学名家之一 ,王鸣盛在探讨历史撰述问题时 ,尤其注意考察史书体裁的利弊得失 ,帝纪与人物传记体例的灵活运用 ,以及书志与论赞体例的进一步完善等问题 ;同时他又能够联系具体史事和作者撰述思想来讲体例 ;既重视体例又强调不应为体例所拘 ,反映其朴素辩证的变通思想 ,值得我们深入研究 ,并加以继承和发展。     

Experimental Investigation on Steel W-Shaped Folded Plate Dissipative Connectors for Horizontal Precast Concrete Cladding Panels

A dissipative connector device, consisting of a steel plate folded at right angle along three lines to get a W-shaped profile, is proposed for the safe fastening of the horizontal cladding panels of new or existing precast structures under seismic action. Experimental tests are carried out to characterize the hysteretic behavior of the connector device. Different technological features, restraint conditions, and loading protocols are considered. Nonlinear hysteretic models are validated against the results of pseudo-dynamic tests on a full-scale prototype of precast building with cladding panels. Guidelines for the design of the dissipative connector device are provided.     

Optimum Design of Passive Control Devices for Reducing the Seismic Response of Twin-Tower-Connected Structures

Based on the 3-single-degree-of-freedom (SDOF) model of twin-tower structures linked by the sky-bridge and passive control devices, the frequency functions and the vibration energy expressions of the structures are derived by using the stationary white noise as the seismic excitation. The analytical formulas for determining the connecting optimum parameters of viscoelastic damper (VED) represented by the Kelvin model and the viscous fluid damper (VFD) represented by Maxwell model are proposed using the principle of minimizing the average vibration energy of either the single tower or the twin tower. Three pairs of representative numerical examples of twin-tower-connected structures are used to verify the correctness of the theoretical approach. The optimum parametric analysis demonstrates that the control performance is not sensitive to damper damping ratio of VED and relaxation time of VFD. The effectiveness of the proposed control strategies based on the 3-SDOF models is also proved to be applicable to multi-degree-of-freedom systems. The theoretical analysis and numerical results indicate that the seismic response and vibration energy of the twin-tower-connected structures are mitigated greatly under the two types of dampers. The presented control strategies of VED and VFD can help engineers in application of coupled structures.     

Modeling and Seismic Response Analysis of RC Precast Italian Code-Conforming Buildings

ABSTRACT

In this study, industrial single-story RC precast buildings are investigated. Twenty-four case studies have been considered, in which the column height, the beam spans and the seismic hazard level are varied. The seismic design of the selected case studies is performed according to the Italian building code and additional technical documentation. Three-dimensional nonlinear models are defined to perform static and dynamic analyses for the seismic assessment of the selected case studies. Demand/capacity ratios in terms of the selected engineering demand parameters are computed for ten increasing values of the seismic input return period.     

Dynamic Analysis and Seismic Response of Planar Circular Arches with Variable Cross-Section

The aim of this paper is to investigate the dynamic response of planar circular arches with variable cross-section subjected to seismic ground motions. Arches have a wide range of application (e.g. bridges, roofs) thanks to their capacity to span large areas by resolving vertical actions into compressive stresses and confining tensile stresses. The full understanding of their dynamic response is a challenging technical and computational problem, especially when seismic loading is considered. For example, the assumption of axial inextensibility simplifies the differential equations but overestimates the vibration frequencies, especially those of shallow arches since axial forces are of paramount importance (as opposed to beams). In lieu of the above, our formulation incorporates the effect of axial extension, and the arches are modeled using a new generic curved beam model that includes both axial (tangential) and transverse (normal) to the arch centerline deformations, and is able to account for variable mass and stiffness properties, as well as elastic support or restraint. The resulting dynamic governing equations of the circular arch are formulated in terms of the displacements, and solved using an efficient integral equation method. Three circular arches with variable rectangular cross-section are analyzed in order to investigate their dynamic properties and seismic performance. Using both time history and modal analysis useful conclusions are drawn with regard to the contribution of each mode on the calculation of different response quantities.