Examination of prehistoric artifacts via fatty acid methyl ester (FAME) techniques using modern environmental stewardship

Elucidating the specific use and purpose of archaeological specimens such as stone axes and grinding stones can improve the understanding of an area's ecosystem and civilization. Chemical analysis of residues preserved on these tools may provide key information in identifying how the tool was implemented. The arid US Great Basin provides an ideal environment for the preservation of fatty acid residues.     

Performance of Buried Gas Distribution Pipelines Subjected to Reverse Fault Movement

In the current work, the results of full-scale laboratory testing of 114.3 and 168.3 mm in diameter steel gas distribution pipes buried at different depths and in two different soil types under a reverse fault offset of 0.6 m are presented and discussed in terms of longitudinal strain distribution, pipe deformation, and cross-section distortion. Results show that the pipe deformation and accordingly its failure mode, and soil failure planes change with increasing burial depth. It was also found that severe cross-section distortion occurs at about 2.3 times the strain limit for onset of wrinkling suggested by various guidelines.     

Influence of Time Step of Ground Motions on Site Effect and Structural Response Analyses for Long-Duration Earthquakes

Long-duration ground motions may be down-sampled to speed up the computational process. However, using ground motions with large time step (Δt) would inevitably bring in numerical errors. The influence of Δt on the site effect and structural response analyses was quantitatively examined in this study. The results show that the nonlinear site response method is more sensitive to a change of Δt than the equivalent-linear method. For the structural analysis, the impact of Δt is highly dependent on the magnitude of damage parameters. Thus, using input motions with Δt as 0.005 s is recommended for structures subjected to strong shakings.     

Site Classification Assessment for Estimating Empirical Attenuation Relationships for Central-Northern Italy Earthquakes

The aim of this article is to investigate the ground motion attenuation of the most industrialized and populated regions of Italy, evaluating the capability of different approaches to estimate site dependent models. The 5.2 local magnitude earthquake on November 24, 2004 shocked the areas of Northern Italy producing damage of about 215 million euros. The data set, including 243 earthquakes of local magnitude up to 5.2, has been collected in the period December 2002–October 2005 by 30 three-component seismic stations managed by Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Milano (INGV-MI). Empirical attenuation relationships have been estimated for horizontal peak ground velocity (PGHV), acceleration (PGHA), displacement (PGHD), and for response spectral acceleration (SA) for periods between 0.1 and 1.5 s. To estimate suitable attenuation models, in particular for sites characterized by thick sedimentary geological formations, a soil discrimination based on EU8 code can lead to wrong evaluations. On the contrary, a classification based on H/V spectral ratios of seismic ambient noise (NHV) allows the models to fit better real and predicted data and to reduce the uncertainties of the process. For each receiver, NHV have been strengthened by additional H/V spectral ratio of earthquake data (EHV), calculated considering different portions of the analysed signals. In order to validate the PGHA attenuation relationship for greater magnitudes, accelerometric records, relative to Central-Northern Italy strong motions occurring in the last 30 years, have been collected and superimposed to our attenuation curves.     

A Simplified Drift-Based Assessment Procedure for Regular Confined Masonry Buildings in Seismic Regions

This article presents a simplified procedure for assessing the seismic performance of existing low-to-medium rise confined masonry (CM) buildings, which are a typical construction type in Latin-America. The procedure consists of the estimation of the peak roof and first-story inelastic drift demand of CM buildings. The expected peak inelastic displacement demand is related to drift-based fragility curves, which express the probability of being or exceeding two key damage states in the masonry panels, developed from a relatively large experimental database. The proposed procedure could be very useful for obtaining rapid estimates of expected performance during future earthquake events and for assessing the seismic vulnerability of regular confined masonry structures.     

Seismic Behavior of Reinforced Concrete Interior Wide-Beam Column Joints

In this article, experimental and finite element (FE) numerical investigations on interior wide-beam column joints are presented. The experimental research consisting of three full-scale interior wide-beam column specimens was carried out at Nanyang Technological University, Singapore to study the seismic behavior. Details of the test results are discussed to understand the specimens' seismic performance in terms of general behavior, hysteresis loops response, and strain profiles of longitudinal reinforcement. In the FE numerical study, the three-dimensional (3D) model developed is validated by comparing the analysis results with the experimental test results, which has shown a good agreement. A parametric study is performed to elucidate more information and to understand the influence of critical parameters affecting the joint behavior such as column axial load, beam anchorage ratio, and wide beam participation.     

A Five-Step Procedure for the Dimensioning of Viscous Dampers to Be Inserted in Building Structures

Viscous dampers have widely proved their effectiveness in mitigating the effects of the seismic action upon building structures. In view of the large impact that use of such dissipative devices is already having and would most likely have soon in earthquake engineering applications, this article presents a practical procedure for the seismic design of building structures equipped with viscous dampers, which aims at providing practical tools for an easy identification of the mechanical characteristics of the manufactured viscous dampers which allow to achieve target levels of performances. Selected numerical applications are developed with reference to simple, but yet relevant, cases.     

Evaluation of Strength Hierarchy of Beam-Column Joints of Existing RC Structures under Seismic Type Loading

To evaluate the strength hierarchy, three different types of exterior beam-column joint, i.e., gravity load designed, non ductile and ductile, following two different codes are considered. Strength of different components of beam-column joint, i.e., column, beam, and joint core, is individually calculated from different failure criteria. Shear strength of the joint is evaluated from softened strut and tie model. Strength hierarchy, ultimate strength, and critical failure modes of the specimens are analytically estimated and found to be well corroborated with the experimental results. The study will help in designing the earthquake resistant RC structures in a more rational way.     

Stone Tool Forms and Functions: A Morphometric Analysis of Modern Humans' Stone Tools From Song Terus Cave (Java,Indonesia)

Stone industries from the beginning of the Holocene of South‐East Asia are difficult to characterize typo‐technologically. We apply modern morphometrics to informal pieces to complement usewear analysis and gain a better understanding of the relation between forms and functions. Both the log shape ratio (LSR) based on linear measurements and elliptical Fourier analysis (EFA) based on 2D outlines are used to analyse a sample of 2372 stone artefacts from Song Terus cave (Java, Indonesia). The results show that no specific form corresponds to a specific function or vice versa. Nevertheless, among used artefacts, EFA highlighted several shape tendencies.     

Microtremor HVSR Study of Site Effects in the Ilirska Bistrica Town Area (S. Slovenia)

The region of Ilirska Bistrica is one of the most seismically active areas of Slovenia, where 15 damaging earthquakes with maximum intensity equal or greater than V EMS-98 have occurred in the last 100 years. These earthquakes have shown that strong site effects are characteristic of the parts of the town that are built on soft Pliocene clay and sand overlain by Quaternary alluvium. Since there is a lack of boreholes and geophysical and earthquake data, the microtremor horizontal-to-vertical spectral ratio (HVSR) method was applied to a 250 m dense grid of free-field measurements over an extended area and to a 200 m dense grid in the town area in order to assess the fundamental frequency of the sediments. Measurements were additionally performed in ten characteristic houses to assess the main building frequencies. The effects of wind and artificial noise on the reliability of the results were analyzed. The map of the fundamental frequencies of sediments shows a distribution in a range of 1–20 Hz. The lower frequency range (below 10 Hz) corresponds to the extent of Pliocene clays and sand overlain by alluvium, which form a small basin, and the higher frequencies to flysch rocks, but variations within short distances are considerable. The measurements inside the buildings of various heights (2–6 stories) showed main longitudinal and transverse frequencies in the range 3.8–8.8 Hz. Since this range overlaps with the fundamental frequency range for Pliocene and Quaternary sediments (2–10 Hz), the danger of soil-structure resonance is considerable, especially in the northern part of the town. Soil-structure resonance is less probable in the central and southern part of the town, where higher free-field frequencies prevail. These observations are in agreement with the distribution of damage caused by the 1995 earthquake (M_L?=?4.7, I_max?=?VI EMS-98), for which a detailed damage survey data is available.