3D numerical modeling of hydrothermal processes during the lifetime of a deep geothermal reservoir

Understanding hydrothermal processes during production is critical to optimal geothermal reservoir management and sustainable utilization. This study addresses the hydrothermal (HT) processes in a geothermal research doublet consisting of the injection well E GrSk3/90 and production well Gt GrSk4/05 at the deep geothermal reservoir of Groß Schönebeck (north of Berlin, Germany) during geothermal power production. The reservoir is located between ?4050 to ?4250 m depth in the Lower Permian of the Northeast German Basin. Operational activities such as hydraulic stimulation, production (T = 150°C; Q = ?75 m³ h^?1; C = 265 g l^?1) and injection (T = 70°C; Q = 75 m³ h^?1; C = 265 g l^?1) change the HT conditions of the geothermal reservoir. The most significant changes affect temperature, mass concentration and pore pressure. These changes influence fluid density and viscosity as well as rock properties such as porosity, permeability, thermal conductivity and heat capacity. In addition, the geometry and hydraulic properties of hydraulically induced fractures vary during the lifetime of the reservoir. A three‐dimensional reservoir model was developed based on a structural geological model to simulate and understand the complex interaction of such processes. This model includes a full HT coupling of various petrophysical parameters. Specifically, temperature‐dependent thermal conductivity and heat capacity as well as the pressure‐, temperature‐ and mass concentration‐dependent fluid density and viscosity are considered. These parameters were determined by laboratory and field experiments. The effective pressure dependence of matrix permeability is less than 2.3% at our reservoir conditions and therefore can be neglected. The results of a three‐dimensional thermohaline finite‐element simulation of the life cycle performance of this geothermal well doublet indicate the beginning of thermal breakthrough after 3.6 years of utilization. This result is crucial for optimizing reservoir management. Geofluids (2010) 10 , 406–421     

MODELS OF MAN'S BIOSOCIAL ADAPTATION IN AN INDUSTRIAL SOCIETY*

The morphological, physiological, and behavioral adaptation of professional athletes can be viewed as a model, being close to the successful hunter's adaptation in a foraging society. Physique, endocrine status, and personality traits were studied in athletes of various professional levels. A set of traits believed to be adaptive for this group is described. Athletes display masculine proportions of head and body, higher testosterone levels, early onset of sexual activity, extroversion, and thoroughness. These fi ndings are discussed from the standpoint of modern ethology and evolutionary anthropology.     

A FOSSIL HUMAN HUMERUS FROM KHVALYNSK: MORPHOLOGY AND TAXONOMY

A fossil humerus from Khoroshevsky Island, Khvalynsk, Saratov Province, previously believed to have been lost eighty years ago, was studied by osteometric, X-ray, tomographic, histological, and paleopathological methods. The results suggest that the fossil represents an adult Neanderthal, apparently male, displaying a peculiar hormonal status which ? nds no direct parallels among known human physiological conditions, either normal or pathological.     

CHARACTERIZATION OF CORAL RED SLIPS ON GREEK ATTIC POTTERY*

Samples of red and black gloss from Greek Attic pottery of the late sixth to fifth centuries bc were examined using scanning electron microscopy (SEM and FIB/STEM). The focus of the study was the chemical and microstructural characterization of the red gloss that was first produced during this period. Two groupings of red gloss were revealed. One red was found to be compositionally similar to the black glosses (labelled ‘LCM coral red’). The other red showed more significant chemical differences, such as higher calcium and magnesium, in comparison to the black (labelled ‘HCM coral red’). The existence of two chemically distinct reds—otherwise identical in colour and texture—suggests that there was more than one source of clay available to the Attic potters for producing red.     

THE EFFECT OF SALTS ON THERMAL AND HYDRIC DILATATION OF POROUS BUILDING STONE*

Fifteen desalinated sandstone drill core samples from Umm Ishrin Sandstone Formation in Petra (Cambrian age) were used for this study. The samples were mineralogically analysed using X‐ray diffraction and their physical properties were also determined. Samples with similar physical properties and mineralogical composition were taken for further experimental work. After desalination, thermal and hydric dilatation coefficients were measured, then three types of salts (NaCl, KCl and Na₂SO₄·10H₂O), which have high solubility and consequently are the most dangerous to building stone (and are also detected in the sandstone monuments in Petra), were introduced into the samples and their contents were calculated. The results show that salt crystallization in the pores of building stones can increase their thermal dilatation and decrease their hydric dilatation to varying extents, depending on the nature of the salt. The average increase in the thermal dilatation coefficient per unit mass of salt is the lowest for the Na₂SO₄·10H₂O‐salted samples with a value of 5.3%, while the NaCl‐salted samples have the highest value with 7.8% per salt mass. The average percentage of the decrease of the hydric dilatation coefficient is 1061% for Na₂SO₄·10H₂O‐salted samples per mass of salt content; the NaCl‐salted samples have a value of 1510% per mass of salt content, and the KCl‐salted samples almost the same value. For the salt‐free samples, it was found that in climatic conditions with a high temperature range, the deterioration of sandstone due to temperature fluctuation is more effective than that caused by change in the moisture content, while samples with high salt content suffer more from hydric dilatation.     

A MULTI‐ANALYTICAL APPROACH FOR THE CHARACTERIZATION OF COMMODITIES IN A CERAMIC JAR FROM ANTINOE (EGYPT)*

This paper describes a multi‐analytical chemical study performed on the original, almost totally conserved, content of a small ceramic jar from the Antinoe archaeological site (fifth to seventh centuries ad, Roman Egypt) and now belonging to the archaeological collection of the Istituto Papirologico ‘Girolamo Vitelli’ (Florence, Italy). Scanning electron microscopy with an energy‐dispersive X‐ray spectrometer (SEM–EDX), Fourier transformed infrared spectroscopy (FTIR) and X‐ray diffraction (XRD) were all used to characterize the inorganic components of the archaeological material. The organic substances were analysed using FTIR, direct exposure mass spectrometry (DE–MS) and gas chromatography – mass spectrometry (GC–MS). The inorganic component essentially consisted of halite (NaCl). Among the NaCl crystals, lamellar elements were identified. They were chemically characterized by carbonato‐apatite and showed a concentric morphology typical of the scales of small fish. The most prevalent organic constituents of the sample were monocarboxylic acids, α,ω‐dicarboxylic acids, and cholesterol and its oxidation products. The organic material composition was consistent with the occurrence of lipids of animal origin. In addition, diterpenes related to pine pitch were also identified. The overall results suggest that the material recovered in the small ceramic jar found in Antinoe is a residue of fish‐based pickles such as garum, muria, allex and liquamen, which were commonly used in Roman times.     

THE OCCURRENCE OF PALYGORSKITE IN THE YUCATÁN PENINSULA: ETHNO‐HISTORIC AND ARCHAEOLOGICAL CONTEXTS*

Palygorskite is a rare clay mineral used by the ancient Mayas for fabricating the Maya blue pigment and for other purposes. It seems to have been obtained from a restricted area in the Yucatán peninsula where important archaeological sites are found. Geological samples from different localities in this area show a high content in palygorskite, indicating that this clay is widespread in Yucatán. Combining structural, morphological, compositional and geochemical methods, we analysed the common characteristics of Yucatecan palygorskites, and compared them with palygorskites from other origins around the world. These results can be used for defining a fingerprint of Yucatecan palygorskite to be used in provenance studies of archaeological artefacts, in particular the Maya blue pigment.