河谷型城市居民生活空间质量特征及社会效应——以兰州市为例

城市居民高品质生活建设是推进新型城镇化、提升城市功能品质的有效途径。以兰州市为例，借助步行指数从安全性、健康性、便利性、舒适性和社会性五个维度构建城市生活空间质量指标体系，对兰州市河谷地区1221个居住小区生活空间质量及其产生的社会效应展开分析。结果表明：①兰州市城市综合生活空间质量整体偏低，呈“一主两次”的多核组团式空间结构，且具有“东高西低”的不均衡特征。②舒适性空间呈“高值—分散、低值—集中”；便利性空间呈多中心向外递减的趋势；健康性空间呈“中间高，两头低，高值偏东”格局；安全性空间呈河谷中心向外递减的趋势；社会性空间呈河谷中心高度集聚、边缘低值集中连片分布。③生活空间质量以中等质量生活空间、较低生活质量空间、低质量生活空间为主，较高生活质量次之，高质量生活空间最少。④兰州市生活空间质量分异产生了居民住房不平等与居住分异、资源配置失衡与空间剥夺、社会信任危机与社会隔离，以及居住区有机更新和空间重构等社会效应。     

蜂蜡类残留物的科学分析研究

蜂蜡是古代人类可获得的最常见的天然材料之一，在人类生产生活中占有重要地位。对蜂蜡类残留物的科技分析可直接提供古代人类对蜂蜡利用的科学证据。本文介绍了蜂蜡的产生与组成，梳理了蜂蜡类残留物的样品处理与检测分析方法，并总结了蜂蜡类残留物科学鉴定的依据，以期为古代蜂蜡利用与其他相关问题的研究提供有益参考。     

基于腾讯迁徙大数据的长三角城市群春运人口流动时空特征

开展城市群人口流动研究对促进区域人口有序流动和城市群协同发展具有重要的理论和实践指导意义。本文基于腾讯迁徙大数据，运用GIS空间统计和K-shell分解等方法，从人口流动总量、位序、时序和网络层级等方面，对我国长三角城市群2018年春运期间的人口流动特征进行系统研究。结果表明：①长三角城市群春运期间大规模的“返乡流”和“返城流”呈现明显的对称性，并分别于除夕和第一个工作日达到最高峰。②经济发展水平相对较高的上海、苏州、杭州等为劳动力输入型城市，而经济发展水平相对较低的盐城、安庆和滁州等为劳动力输出型城市。③长三角城市群内部人口流动网络具有明显的层级特征，其中上海和杭州是人口辐射核心城市，上海-合肥、上海-南京、上海-杭州等是人口流动的主体路径；空间上东部-西部横向人口流动最为频繁，大体呈现“Z”字形。     

基于ATP生物发光法的文物霉变检测与应用研究

为研究判定ATP(adenosine triphosphate,三磷酸腺苷)生物发光法在文物表面霉菌污染检测中应用可行性、科学性及适用性,利用ATP生物发光法对文物表面50种霉菌的生物发光值进行检测;构建了7种常见霉菌及其混合菌的菌落总数值与ATP生物发光值的线性关系函数,并在对应线性关系下分析了预测菌落总数值与实际值的差异;进一步利用ATP生物发光法评价模拟染霉试样在香茅醛熏蒸处理前后的霉菌数量变化。结果显示:50株待测霉菌中90%霉菌均检出了生物发光值(RLU)。在不同培养条件下,青霉、曲霉、木霉、毛壳菌、枝孢菌以及其混合菌的菌落总数对数值(lg^(CFU/mL))与生物发光对数值(lg^(RLU))之间均呈现了良好的线性关系,相关系数R^(2)>0.9817;在相应的线性关系下,预测的菌落总数值与实际平板计数的菌落总数值具有一致性(P<0.05),说明ATP生物发光法可以对文物表面霉菌进行准确相对定量。此外,香茅醛熏蒸处理组和对照组文物表面霉菌的生物发光值和菌落总数呈现了相同的差异变化趋势,说明ATP生物发光法可以直接用于熏蒸剂抑菌效力的评价。因此,ATP生物发光法在文物霉变检测中具有很高的适用性,同时在文物霉变程度分析及霉变文物消杀处理的效果评价等方面具有良好的应用价值,可为文物微生物病害的防控提供有效的技术支持。     

世界华商大会初探

世界华商大会自1991年举办至今,已发展成为当今世界的一项知名盛会。本文分析了大会产生的背景,概述了第一届到第八届大会的基本情况,并指出其发展具有四个特点:一是大会经济、政治、文化等方面的综合性;二是大会组织逐渐成熟、举办经验更加丰富;三是大会与中国经济发展壮大具有某种同步性;四是历次大会的主题体现了与时俱进的特点。作者最后认为,应实事求是地评估大会的作用。     

金沙土遗址盐害分布与演化特征

金沙土遗址表面存在泛盐、粉化、空鼓等盐害。对这些盐害的分布特征与演化过程的研究是科学保护金沙土遗址的第一步，也是进一步探讨盐害致病机理的前提条件。本工作收集整理了2010～2020年金沙土遗址病害调查资料，通过现场调查和图像处理技术对盐害的类型、分布特征与演化过程进行定性和定量分析；采用X射线衍射、离子色谱和扫描电镜等测定了不同高度土样的成分、盐分含量以及微观结构。结果显示金沙土遗址主要的盐害类型为表面泛盐、粉化、空鼓、片状剥蚀和掏蚀；主要分布区域是西北向走廊和古河道附近，机挖坑侧壁最为严重；在探方侧壁上盐害由上到下依次由表面泛盐过渡到单独粉化，再到空鼓和片状剥蚀，最底层为掏蚀。金沙土遗址盐害的发育过程可以概括为四个阶段，每个阶段主要发育的盐害类型不同，依次为表面泛盐、粉化、片状剥蚀和掏蚀。越到后期，各类盐害分布范围越大，发展速度越快，对土遗址破坏性越大。离子浓度沿高度的分布与毛细上升作用有关，也与病害的劣化程度和发育进程有关。硫酸钙类是导致土遗址泛盐、粉化和脱落的主要盐分之一。     

河南荥阳官庄遗址陶范物源及制作工艺分析

Guanzhuang site is located in the west of Guanzhuang Village, Gaocun Township, Xingyang City, Henan Province. From the site, more than 3 000 pottery moulds have been unearthed, with various types, including the moulds for containers, tools, chariots, weapons, money and core, etc. According to the types and decorations of pottery moulds and the characteristics of co - existing pottery, the pottery moulds of Guanzhuang site can be divided into two periods—Phase I dating from the late Western Zhou Dynasty to the early Spring and Autumn Period, and phase TJ considered between the early and middle Spring and Autumn Period. The change of bronze ware styles from the Western Zhou Dynasty to the Spring and Autumn Period was important in the development of ancient Chinese bronze wares. Due to the lack of archaeological data, research on pottery moulds during the two - week period was still insufficient; discussion of the important issue of standardizing the sources of raw materials was also relatively weak. Environmental archaeology has relatively mature methods and practices in depositional dynamics, depositional processes and provenance tracing, which could provide new ideas for further in - depth discussions on this issue. In order to understand the material sources and craftsmanship of pottery moulds unearthed from Guanzhuang site in Xingyang, Henan Province, samples of Guanzhuang pottery moulds and natural sedimentary strata were studied using particle size analysis, XRF and petrographic analysis to give the following results. 1) The raw materials for mould - making were taken from the late Pleistocene Malan loess layer under the cultural layer of the site. The Malan loess underwent simple manual elutriation before being used to make pottery moulds. 2) A small amount of plant ash and calcium nodule powder was added during the production process of pottery moulds as an admixture to increase the high - temperature resistance. 3) The inner side of pottery mould for container was mainly made of Malan loess, while the outer one was made of a mixture of Malan loess and river sand with a blending ratio of about 7:5. Pottery moulds for various ware types had different processing techniques (e.g., moulds for containers were more refined). Besides, compared with early pottery moulds, later ones are relatively rougher, but the difference is not obvious. 4) The petrographic characteristics of double - layer container moulds indicate that there are different production processes for the inner and outer sides of mould. The inner side was made of Malan loess with finer particles—below 100 μm—as the raw material after elutriation, and there were traces of directional trimming. The outer one was made of a mixture of two parts of minerals (coarse and fine), and there was no obvious processing trace. Analysis of sample particle size is a new attempt to discuss the material sources of pottery moulds. The related discussion of mud - clarifying ponds is also helpful to understand the function of such relics and the formation process of accumulation in them. This study has important reference significance for exploring the material and craft characteristics of pottery moulds before and after the early Spring and Autumn Period in the Central Plains. © 2023, Sciences of Conservation and Archaeology. All Rights Reserved.