Influence of Openings,With and Without Confinement,on Cyclic Response of Infilled R-C Frames — An Experimental Study

This article presents the experimental results of a study on reinforced-concrete frames infilled with masonry with openings. The frames were designed according to current European codes. They were built in a scale 1:2.5 and infilled with masonry walls. Mid-size window and door openings were located centrically and eccentrically and were executed with and without tie-columns around them. Presence of masonry infill, although not accounted for in design, improved the system behavior (increase in stiffness, strength and energy dissipation capacity) at drift levels of up to 1%. During the test, openings did not influence the initial stiffness and strength at low drift levels. Their presence became noticeable at higher drift levels, when they lowered the energy dissipation capacity of the system. The infill wall had a multiple failure mechanism that depended on the opening height and position. Tie-columns controlled the failure type, independent of the opening type, prevented out-of-plane failure of the infill, and increased the system's ductility. Negative effects of the infill on the frame were not observed. The infill's contribution could be deemed positive as it enhanced the overall Structural Performance Level. Analytical expressions commonly used for infilled frames underestimate the infill's contribution to strength and stiffness and overestimate the contribution of the bare frame.     

Polyphasic hydrothermal and meteoric fluid regimes during the growth of a segmented fault involving crystalline and carbonate rocks (Barcelona Plain,NE Spain)

A polyphasic tectonic‐fluid system of a fault that involves crystalline and carbonate rocks (Hospital fault, Barcelona Plain) has been inferred from regional to thin section scale observations combined with geochemical analyses. Cathodoluminescence, microprobe analyses and stable isotopy in fracture‐related cements record the circulation of successive alternations of hydrothermal and low‐temperature meteoric fluids linked with three main regional tectonic events. The first event corresponds to the Mesozoic extension, which had two rifting stages, and it is characterized by the independent tectonic activity of two fault segments, namely southern and northern Hospital fault segments. During the Late Permian‐Middle Jurassic rifting, these segments controlled the thickness and distribution of the Triassic sediments. Also, dolomitization was produced in an early stage by Triassic seawater at shallow conditions. During increasing burial, formation of fractures and their dolomite‐related cements took place. Fault activity during the Middle Jurassic–Late Cretaceous rifting was localized in the southern segment, and it was characterized by hydrothermal brines, with temperatures over 180°C, which ascended through this fault segment precipitating quartz, chlorite, and calcite. The second event corresponds to the Paleogene compression (Chattian), which produced exhumation, folding and erosion, favouring the percolation of low‐temperature meteoric fluids which produced the calcitization of the dolostones and of the dolomite cements. The third event is linked with the Neogene extension, where three stages have been identified. During the syn‐rift stage, the southern segment of the Hospital fault grew by tip propagation. In the relay zone, hydrothermal brines with temperature around 140°C upflowed. During the late postrift, the Hospital fault acted as a unique segment and deformation occurred at shallow conditions and under a low‐temperature meteoric regime. Finally, and possibly during the Messinian compression, NW‐SE strike‐slip faults offset the Hospital fault to its current configuration.     

DARK AND SHINY: THE DISCOVERY OF CHROMITE IN BRONZE AGE FAIENCE*

The Late Bronze Age (1550–1200 bc ) in the Near East was a period of cultural development, international trade and technological innovation, notably in metallurgy and silicate technology. As a spin‐off of the new glass technology, new colorants were also applied to faience glazes presumably to increase their aesthetic value. Here, we report on the presence of chromite minerals in the glaze of a faience vessel from Deir ‘Alla, Jordan, 1200 years earlier than reported so far. Importantly, chromite was not only used as a greyish pigment, but also as a nucleating agent for spherulitic crystallization of augite in the amorphous glaze. These synthetic augite formations give a unique, sparkly appearance to the faience vessel, apparently imitating a metallic look. The making of such an intricate glaze and its contemporary significance reflect not only the high level but also the appreciation of innovation in that region at that time.     

Recent research into oldowan hominin activities at Kanjera South, Western Kenya

This paper presents the initial results of excavations at Kanjera South, located on the Homa Peninsula in Western Kenya. Since 1995, our exploration of this locality has yielded a combination of artefacts and well preserved faunal remains in a sedimentary context that also allows for environmental reconstruction. Here we examine the history of exploration of Kanjera and its significance in the development of palaeoanthropological research in East Africa. We also summarise our findings from the recently discovered Oldowan site. Taphonomic analyses suggest that the archaeological layers were formed at least partially by hominin activity. Artefacts made from a wide variety of raw materials are abundant, as are animal bones. Results of our first analyses confirm that Oldowan hominins had considerable behavioural flexibility and occupied a range of habitats.Cet article présente des résultats préliminaires de nos fouilles au site de Kanjera South, situé sur la péninsule de Homa au Kenya occidental. Depuis 1995 nos explorations à cette localité ont produit une combinaison des outils lithiques et des restes fossils dans un bon état de conservation venant d’un contexte sédimentaire qui permet également les reconstitutions paleoenvironnementaux. Ici nous examinons l’histoire de l’exploration de Kanjera et de son importance dans le développement de la recherche paleoanthropologique en Afrique de l’Est. Nous récapitulons également nos résultats du gisement récemment découvert d’Oldowan. L’étude taphonomique suggère que les couches archéologiques ont été formées au moins partiellement par l’activité des hominins. Les objets fabriqués faits à partir d’une grande variété de matières lithiques sont abondants, de même que les os animaux. Les résultats de nos premières analyses confirment que les hominins d’Oldowan ont eu une flexibilité de comportement considérable et ont occupé une gamme d’habitats différents.     

Urban development in peripheral regions of the New Europe: The case of Vigo in Galicia

The paper discusses the development of peripheral cities and regions in a world where economic integration is growing. The paper argues that the development of peripheral cities and regions depends on their development potential and accessibility to markets. Their sustainable development, however, lies in the functioning of the forces of development: the organization of the productive system, the diffusion of innovation, the territory's urban development and the change and adaptation of the institutional system. These are forces that govern the economic growth process, generate externalities, and reduce production costs through reciprocal interaction. The paper's discussion is based on the analysis of the dynamics of the city of Vigo in Galicia, a peripheral region of the European Union.     

Precipitation of lead–zinc ores in the Mississippi Valley‐type deposit at Trèves,Cévennes region of southern France

The Trèves zinc–lead deposit is one of several Mississippi Valley‐type (MVT) deposits in the Cévennes region of southern France. Fluid inclusion studies show that the ore was deposited at temperatures between approximately 80 and 150°C from a brine that derived its salinity mainly from the evaporation of seawater past halite saturation. Lead isotope studies suggest that the metals were extracted from local basement rocks. Sulfur isotope data and studies of organic matter indicate that the reduced sulfur in the ores was derived from the reduction of Mesozoic marine sulfate by thermochemical sulfate reduction or bacterially mediated processes at a different time or place from ore deposition. The large range of δ³⁴S values determined for the minerals in the deposit (12.2–19.2‰ for barite, 3.8–13.8‰ for sphalerite and galena, and 8.7 to ?21.2‰ for pyrite), are best explained by the mixing of fluids containing different sources of sulfur. Geochemical reaction path calculations, based on quantitative fluid inclusion data and constrained by field observations, were used to evaluate possible precipitation mechanisms. The most important precipitation mechanism was probably the mixing of fluids containing different metal and reduced sulfur contents. Cooling, dilution, and changes in pH of the ore fluid probably played a minor role in the precipitation of ores. The optimum results that produced the most metal sulfide deposition with the least amount of fluid was the mixing of a fluid containing low amounts of reduced sulfur with a sulfur‐rich, metal poor fluid. In this scenario, large amounts of sphalerite and galena are precipitated, together with smaller quantities of pyrite precipitated and dolomite dissolved. The relative amounts of metal precipitated and dolomite dissolved in this scenario agree with field observations that show only minor dolomite dissolution during ore deposition. The modeling results demonstrate the important control of the reduced sulfur concentration on the Zn and Pb transport capacity of the ore fluid and the volumes of fluid required to form the deposit. The studies of the Trèves ores provide insights into the ore‐forming processes of a typical MVT deposit in the Cévennes region. However, the extent to which these processes can be extrapolated to other MVT deposits in the Cévennes region is problematic. Nevertheless, the evidence for the extensive migration of fluids in the basement and sedimentary cover rocks in the Cévennes region suggests that the ore forming processes for the Trèves deposit must be considered equally viable possibilities for the numerous fault‐controlled and mineralogically similar MVT deposits in the Cévennes region.     

Groundwater discharges in the Baltic Sea: survey and quantification using a schlieren technique application

Groundwater seeps are known to occur in Eckernförde Bay, Baltic Sea. Their discharge rate and dispersion were investigated with a new schlieren technique application, which is able to visualize heterogeneous water parcels with density anomalies down to Δσ_t = 0.049 on the scale of millimeters. With the use of an inverted funnel, discharged fluids can be captured and the outflow velocity can be determined. Overall, 46 stations could be categorized by three different cases: active vent sites, seep‐influenced sites, and non‐seep sites. New seep locations were discovered, even at shallow near‐shore sites, lacking prominent sediment depression, which indicate submarine springs. The detection of numerous seeps was possible and the groundwater‐influenced area was defined to be approximately 6.3 km². Flow rates of between 0.05 and 0.71 l m^?2 min^?1 were measured. A single focused fluid plume, which was not disturbed by the funnel was recorded and revealed a flux of 59.6 ± 20 ml cm^?2 min^?1 and it was calculated that this single focused plume would be strong enough to produce a flow rate through the funnel of 1.32 ± 0.44 l m^?2 min^?1. The effect of different seep‐meter funnel sizes is discussed.