Inelastic Displacement Response of RC Systems with Cyclic Deterioration—An Energy Approach

Inelastic displacements of reinforced concrete systems are investigated by employing an energy-based approach. A hysteresis model is developed that accounts for stiffness degradation, strength deterioration and pinching. The model is calibrated by using experimental data from literature. Inelastic displacement ratios are calculated under a specific set of ground motion records with long effective durations. The results reveal the importance of deteriorating behavior under long duration excitations, especially for short and medium period structures. The last part of the study is devoted to the introduction of a simple empirical relationship for estimating the inelastic displacement demands of degrading RC structural systems.     

Effect of Infill Walls on the Drift Behavior of Reinforced Concrete Frames Subjected to Lateral-Load Reversals

Four-story, single-bay, 1/5 scaled reinforced concrete frames were tested with and without infill walls. Frames were subjected to pseudo-static cyclic loading. In addition, impact hammer measurements were made to obtain the natural frequencies and modal shapes at certain drift levels. It was observed that infill walls cause major changes on both the stiffness and the drift behavior of the frames. Effect of observed changes can be either advantageous or disadvantageous depending on failure mode. Results showed that the distribution of drift that is based on the mode shapes has higher local concentrations than the distribution observed under forced static conditions.     

Differences in the location of urban museums and their impact on urban areas

Traditionally, museums spaces have tended to be located in the central areas of cities, thereby reinforcing existing dynamics and limiting their potential impact on more peripheral areas. The present study examines the locations chosen for museums that have been opened in three European cities: Barcelona, Paris and Turin, between the years 2000 and 2013. It shows how the locating of museums and galleries has not been homogeneous and how each potential location has its strengths and weaknesses. This is particularly evident when we consider such factors as the environmental impact of museums and how they influence the commercial offer, image and attractiveness of their host city. This paper identifies and examines the different types of impact that museum location strategies have on urban areas.     

Excesses of nationalism: Greco‐Turkish population exchange

This article studies 1923 compulsory population exchange between Greece and Turkey through a case study of its experience in Izmir. It traces the ways the early Republican state engaged in the project of reshaping the population by eliminating the non‐Muslims who were rendered as ‘excesses’ in the spatial and discursive matrices of the nation‐state. Through the experience of the exchange in Izmir, it argues that the process of the accommodation and assimilation of the exchangees played a significant role in shaping the modalities of Turkish nationalism by creating new lines and fissures, further dividing the ‘Muslim brethren’ into ever restrictive constructions of Turkishness. It also underlines that this forced displacement is not just a significant episode in Greek and Turkish histories but that it represents a turning point in the project of nation formation in general.     

Armenian women of Istanbul: notes on their role in the survival of the Armenian community

This article argues that the Armenian women living in Istanbul are confined to domestic and communal spaces, and that the roles of symbolizing collective territory and identity, and of cultural reproduction of the community, are mostly associated with women. The data and observations we explore here are based on a field survey of Turkey's Armenian community that was conducted in Istanbul between November 2004 and May 2005. Evaluation of this survey based on both quantitative and qualitative methods allows us to draw some conclusions about the roles of Armenian women in the reproduction of Armenian culture. Women's roles indirectly influence Armenian identity, creating the conditions for its survival.     

Three-dimensional geometry, ore distribution and time-integrated mass transfer through the quartz–tourmaline–gold vein network of the Sigma deposit (Abitibi belt, Canada)

We present a reconstruction of the three‐dimensional (3D) geometry and gold grade distribution of shear zone‐hosted, Au‐mineralized, quartz–tourmaline veins of the Sigma deposit (Abitibi belt). Host shears and veins form a network of anastomosing, steeply dipping structures associated with smaller subhorizontal extensional veins. Our reconstruction has been carried out using the exceptionally large geological database of the mine. From this database, we extracted the geometric position, thickness and gold grades of geometrically best‐defined steep veins contained in a representative subvolume of the deposit. These data allowed the 3D representation of 53 veins, which have been constructed by fitting surfaces through the geometrical data and by contouring thickness and gold grade. The geometry of the network is mainly characterized by: (i) a few large segmented veins, with sinuous and helicoidal shape, and typical vertical dimension of >100 m; (ii) a large number of smaller vertical veins, some of which splay off the steep veins with high dip angles; (iii) subhorizontal extension veins (joints) located at, or close to, the tips of steep veins. The absolute thickness of the vertically short veins is the same as that of the large veins, suggesting that they formed simultaneously, but only a few of them interconnect to form vertically continuous bodies. Patchy, vertically elongated zones of high dilation are present in the large veins, and are poorly correlated with Au‐rich zones. They presumably represent former high‐permeability zones of the network. The highest gold grades occur at the interconnections between the large veins and small splays or subhorizontal joints. This indicates the important role of vein interconnection for fluid flow and gold precipitation within the network. Combining the calculation of the volume of the network with the estimation of tourmaline abundance in the veins, we calculate that 2.1 × 10⁶ m³ of tourmaline and 3.2 × 10⁶ m³ of quartz precipitated during Au deposition.     

CHEMICAL CHARACTERIZATION OF TIN‐LEAD GLAZED POTTERY FROM THE IBERIAN PENINSULA AND THE CANARY ISLANDS: INITIAL STEPS TOWARD A BETTER UNDERSTANDING OF SPANISH COLONIAL POTTERY IN THE AMERICAS*

Majolica pottery was the most characteristic tableware produced in Europe during the Medieval and Renaissance periods. Because of the prestige and importance attributed to this ware, Spanish majolica was imported in vast quantities into the Americas during the Spanish Colonial period. A study of Spanish majolica was conducted on a set of 186 samples from the 10 primary majolica production centres on the Iberian Peninsula and 22 sherds from two early colonial archaeological sites on the Canary Islands. The samples were analysed by neutron activation analysis (NAA), and the resulting data were interpreted using an array of multivariate statistical approaches. Our results show a clear discrimination between different production centres, allowing a reliable provenance attribution of the sherds from the Canary Islands.     

Regional Specialization and Industrial Concentration Patterns in the Turkish Manufacturing Industry: An Assessment for the 1980–2000 Period1

Previous studies on geographical distribution of economic activity in Turkey demonstrate that firms are localized in major metropolitan areas as well as a set of emerging regions. The aim of the paper is to complement the findings of the studies on regional and industrial concentration in Turkey's manufacturing industry by exploring whether regional specialization and industrial concentration patterns changed during the 1980–2000 period. The paper further aims to explore the driving forces of industrial concentration in Turkey's manufacturing industry, particularly during Turkey's economic integration process that started with trade liberalization after 1980 and further developed with the Customs Union in 1996. Regional specialization and industrial concentration are measured by GINI indices Turkey's NUTS-2 regions at the four-digit level for the years between 1980 and 2000. To investigate which variables determine industry concentration, systematic relation between the characteristics of the industry and industrial concentration is tested. Following the method proposed by Paluzie, Pons and Tirado, a panel regression equation is estimated, where the dependent variable is the Gini concentration index and the independent variables are the variables that represent the characteristics of the sectors that follow the predictions of classical trade theory, new trade theory and new economic geography. The major finding of the study is that during 1980–2000, Turkey's regions became more specialized and industry became more concentrated. Increases in the average values of regional specialization and industrial concentration support the prediction developed by Krugman hypothesis that regions become more specialized and industries become more concentrated with economic integration. In exploring the driving forces of industrial concentration, the findings demonstrate that firms tend to cluster in regions where there are economies of scale.     

In Search of Free Spaces to Breathe: Turkey's United June Movement,Social Uprising,and Spatial Maintainability

This study examines the socio-spatial practices of the United June Movement (UJM), a grassroots movement that drew inspiration from the neighbourhood forums of the Gezi Park protests. We argue that the counter-sites of politicisation and symbolic places engraved on the social movements’ memory formed the socio-spatial base of solidarity networks and the long-term political organising of UJM. Secondly, we suggest that in an authoritarian context, activist organisations nourishing from full-scale protests such as UJM need to form, reshape, and sustain free spaces where they feel protected. For testing these arguments, we designed fieldwork around UJM with an ethnographic approach. We concluded that the desire for social change has the potential of generating alternative visions in a spatiotemporal context, but in the medium term, it can turn into a feeling of self-enclosure or being besieged. Even so, such attempts leave a perpetual legacy, tagged to certain spaces and geographies.     

The international transfer of creative industries as a policy idea

This article examines the transfer of creative industries as a policy idea to Lithuania. Tracing the stages of the transfer and analysing its consequences in the local cultural policy field, this paper argues for the importance of studying cultural policy process. The findings reveal that the process of the international transfer of creative industries mattered, because it generated wider transformations in cultural policy field by having ambiguous effects on local power relations. The policy idea of creative industries opened the cultural policy field to new actors. As a result, competition for scarce state funding increased, but cultural organisations gained access to the European Union structural funds. In all, creative industries as a policy idea significantly transformed Lithuanian state cultural policy, in that it led to a reassessment of both the practices and identities of cultural organisations.