AN INVESTIGATION OF THE PROVENANCE OF THE ROMAN AMPHORA CARGO FROM THE PLEMMIRIO B SHIPWRECK

Eighty-six Roman amphora sherds from the Plemmirio B shipwreck, off Sicily, have been analysed by neutron activation analysis. A large group representative of the amphora cargo, mainly of forms Africana 1 and Africana 2A (from the area of modern Tunisia), was subsequently defined. No differences between Africana 1 and Africana 2A samples were observed, thus implying a similar origin for both forms. The provenance of this cargo group was then investigated by comparison with a Roman amphora kiln data base. After elimination of the more mobile elements it was shown that the cargo amphorae were more likely to have been manufactured at kilns around Sullecthum rather than Leptis Minor. The analytical conclusions are thoroughly consistent with the known archaeological information.     

COAL AND CREMATION AT THE TSCHUDI BURN,CHAN CHAN,NORTHERN PERU*

Analyses of a 20–30 cm thick, completely combusted ash at the 25 × 70 m Tschudi burn at Chan Chan, northern Perú, contain 52–55 wt% SiO₂, 180–210 ppm zirconium and are consistent with coal ash. Soil geochemistry across the burn showed elevated calcium and phosphorus content, possible evidence for reported human cremation. A calcined, 5 g, 4.5 cm skull fragment recovered from the burn was confirmed as human by protein radioimmunoassay (pRIA). X‐ray diffraction showed that the bone had been heated to 520°C. The burn took place c. ad 1312–1438 based on interpretation of a ¹⁴C date on carbonized plant tinder.     

THE CHEMICAL ANALYSIS OF ORIENTAL CERAMIC BODY COMPOSITIONS: PART 1: WARES FROM NORTH CHINA*

This paper presents the body analyses of 70 sherds of ceramics made in north China during the Late Tang and Northern Song dynasties (c. AD 80–1200). The major types represented are Ding, Xing and Cizhou-type wares. The analyses were obtained by atomic absorption spectrometry, giving information on nine major and minor constituents. These have been used to differentiate chemically between the major kiln sites in the north, with the aid of multivariate computer analysis. This has demonstrated that there are differing chemical characteristics associated with these kilns, but the study is hampered by the lack of authentic material from controlled excavations of the kiln sites.     

NEUTRON ACTIVATION ANALYSIS OF SIXTEENTH- AND SEVENTEENTH-CENTURY EUROPEAN BLUE GLASS TRADE BEADS FROM THE EASTERN GREAT LAKES AREA OF NORTH AMERICA*

Sixteenth- and seventeenth-century European blue glass trade beads from aboriginal sites in the eastern Great Lakes area of North America have been analysed non-destructively using low neutron dose instrumental neutron activation analysis, so that the beads could be returned to their keepers. Dark blue (cobalt-coloured) beads are readily separable from turquoise (copper-coloured) beads. Differences in the chemistries of the turquoise blue beads appear to be useful in separating glass beads from the two centuries. Low calcium, sixteenth-century turquoise beads tend to distintegrate by a leaching of the alkali metals.     

NATURE AND MICROSTRUCTURE OF GALLIC IMITATIONS OF SIGILLATA SLIPS FROM THE LA GRAUFESENQUE WORKSHOP*

The red glaze (slip) that characterizes the Terra Sigillata potteries greatly contributed to their success during the Roman period. The colour of the slip can in fact be partially explained by the microstructure (crystalline phases, grain sizes) and the physico‐chemistry (composition) of the ceramics. However, the precise process and the diffusion of this technique are still not fully known. In particular, we do not know yet how the production of sigillata took place in the south of Gaul, and the role that was played by the production under Italian influence (pre‐sigillata) preceding the first local sigillata. In this work, a combination of transmission electron microscopy (TEM) and X‐ray synchrotron diffraction techniques was used to study the microstructure of pre‐sigillata slips from the main southern Gaul workshop (La Graufesenque), in order to compare their characteristics with those of high‐quality sigillata. These first results seem to indicate that the antique potters chose clays adapted to their firing conditions and to the type of coating that they wanted to make. These productions cannot be described as an initial phase for the later sigillata production and, rather, seem to correspond to the intention of developing a specific type of pottery only inspired by the famous Italian sigillata forms.     

THE IMPORTANCE OF THE ‘BEST RELATIVE FIT FACTOR’ WHEN EVALUATING ELEMENTAL CONCENTRATION DATA OF POTTERY DEMONSTRATED WITH MYCENAEAN SHERDS FROM SINDA,CYPRUS

Neutron activation analysis of pottery was established at Bonn in 1983 and has since become one of the primary archaeometry‐based analytical techniques at the facility. A brief history of the laboratory and a discussion of the best relative fit procedure for pottery is provided. When comparing concentration data for pottery, a best relative fit should always be considered. This mathematical procedure generally results in ‘sharper’ concentration patterns and improves the separability of chemically not very different compositional groups. This is demonstrated for a set of 30 Late Cypriot (Myc. IIIC1) pottery samples from Sinda, Cyprus, which allow formation of a good reference pattern for this site. Applying factors in the range of 0.82–1.43, a number of samples from Egypt and Palestine can be assigned with high probability to a Cypriot origin.     

PROVENANCE STUDY OF MARBLE ARTEFACTS FROM THE ROMAN BURIAL AREA OF FASCHENDORF (CARINTHIA,AUSTRIA)*

Numerous marble artefacts were among the extraordinary findings excavated at the Roman burial area of Faschendorf (Carinthia, Austria). The provenance of marble objects, particularly in the Roman provinces, is mostly unclear. Predominantly Mediterranean marbles have been used, but there are also some marble occurrences in the eastern Alpine regions that were exploited in those times. Besides a mineralogical–petrographic analysis, grain‐size evaluation in particular, and the determination of carbon and oxygen isotopes allow an effective characterization of the Faschendorf materials. Their provenance from the Gummern Marble complex in Carinthia is very likely.     

PINE RESINS AND POTTERY SEALING: ANALYSIS OF ABSORBED AND VISIBLE POTTERY RESIDUES FROM CENTRAL NEW YORK STATE*

Analysis was performed on absorbed and visible residues from 21 New York State prehistoric pottery sherds dating from 2905 ± 35 bp (Intcal04) (1256–998 cal bc ) to 425 ± 40 bp (Intcal04) (1417–1626 cal ad ). The use of pine resin was detected in 10 of 12 absorbed residue samples and 11 of 17 sherds subjected to visible residue analysis. It seems likely that the pots were resin‐sealed to make them more impermeable, constituting the first chemical evidence of extensive resin‐sealing in North America. A comparison of the results of absorbed and visible residues from eight of the sherds indicates that the two kinds of residue provide complementary evidence of vessel use.     

THE CHEMICAL COMPOSITION OF SOME ARCHAEOLOGICALLY SIGNIFICANT FLINT FROM DENMARK AND SWEDEN

Flint was one of the most widely employed raw materials for artefact manufacture in Denmark and Sweden during the Stone Age, and it continued to be used during subsequent periods. Prehistoric flint mining and lithic manufacturing studies in these countries have attracted considerable attention, but there have been no recent attempts to chemically characterize the geological source materials. This paper builds on a pilot study ( Hughes et al. 2010 ) and uses energy‐dispersive X‐ray fluorescence (EDXRF) analysis to determine quantitative composition estimates for nine major, minor and certain trace elements in seven archaeologically significant flint sources in Denmark and Sweden, along with new data on a number of other sources of prehistoric significance. These data provide a geochemical foundation for ongoing research devoted to determining contrasts and continuities in the time and space utilization of flint sources in Scandinavian prehistory.     

A PROVENANCE STUDY OF POTTERY FROM ARCHAEOLOGICAL SITES NEAR CANOSA,PUGLIA (ITALY)*

Studies have been carried out to assess the provenance of selected pottery excavated at archaeological sites near Canosa, Puglia (Italy). Sixty-six sherds, ranging in date from the mid-seventh century BC to the beginning of the third century BC, were analysed by atomic absorption spectroscopy and 16 elements were determined. The analysis data were subjected to multivariate classification procedures. Tests showed that the majority of the examined sherds came from ancient local kilns; a probable Ionian origin was established for some other sherds, while the rest were of unknown origin.     

CHARACTERIZATION AND PROVENANCE OF LATE ANTIQUE WINDOW GLASS FROM THE PETRA CHURCH IN JORDAN*

Fifth‐ to seventh‐century window glass fragments from the Petra Church in Jordan were analysed by EPMA and spectrophotometry to characterize their optical properties and chemical composition. The objective of this study was to determine the provenance of the raw glass and the secondary production procedures of the window‐panes. Judging from the material evidence, both the crown window‐panes and possibly the rectangular samples were produced through glass‐blowing techniques. The chemical data show that the assemblage forms a homogeneous group of soda–lime–silica glass of the Levantine I type. The green glass, however, has higher silica and lower soda contents than the aqua‐blue fragments. The composition of one sample suggested the recycling of Roman glass. Our results confirm the trade of glass between the Levantine coast and Petra during Late Antiquity. No colouring agents other than iron were detected. Spectrophotometry confirmed the presence of iron and showed that the window fragments absorbed light relatively equally across the visible part of the spectrum. The windows thus seem to have provided an almost colourless illumination for the sacred interior.     

AN ANALYSIS OF THE GEM‐BLUE GLAZE OF YE WANG'S KOJI POTTERY*

Koji pottery is a glazed ceramic art used widely for figurines. In early Taiwan, it was employed in temple construction for decorative purposes. Ye Wang (1826–87) is the first historically documented Koji artist of Taiwan and also the most prominent Koji pottery artist, noted for his modelling and glazing skills. Unfortunately, his unique technique was lost following his death in 1887. In order to provide vital information for ongoing conservation work on Koji pottery, this study analysed the physical and chemical characteristics of Ye Wang's gem‐blue glaze, to discover the glaze formula. DSC combined with the two‐thirds rule revealed that the firing temperature of Ye Wang's works of art was most probably around 878–923°C. EPMA revealed that the gem‐blue glaze has high alkali levels, and belongs to the PbO–K₂O–B₂O₃–Na₂O–SiO₂ system, deriving its unique colour from copper, iron, manganese and cobalt. This study found high potassium levels in the gem‐blue glaze, which are generally a characteristic of traditional Chinese glazes. In addition, a unique discovery of boron, commonly used in famille rose, was also identified in the glaze. By comparing spectra of historical and reconstructed glazes and adjusting the proportion of chromophoric elements, this study found a glazing formula with colours close to those of Ye Wang's gem‐blue glaze.     

NON‐DESTRUCTIVE INVESTIGATION OF BRONZE ARTEFACTS FROM THE MARCHES NATIONAL MUSEUM OF ARCHAEOLOGY USING NEUTRON DIFFRACTION*

Non‐destructive neutron diffraction techniques were applied to determine composition and microstructure data, and hence to derive information on manufacturing techniques of Picenum bronze artefacts. Furthermore, texture analyses were carried out on standards and suitable ancient artefacts to investigate their potential role in archaeometallurgical studies. This is a first step towards an overall characterization of the bronze collection of the Marches National Museum of Archaeology, Italy, and the analytical demonstration of relations with and differences compared to Etruscan metallurgy. The work is also an example application of the powerful non‐destructive archaeometrical approaches provided by time‐of‐flight neutron diffraction.     

THE APPLICATION OF A PORTABLE X‐RAY FLUORESCENCE SPECTROMETER TO THE ON‐SITE ANALYSIS OF GLASS VESSEL FRAGMENTS FROM SOUTHERN THAILAND*

Ancient glass vessel fragments belonging to the seventh to ninth centuries ad , from the Ko Kho Khao, Laem Pho and Khuan Lukpad sites in southern Thailand, were studied. The glass vessel fragment samples are a collection belonging to the Department of Archaeology, the 15th Regional Office of Fine Arts of Thailand. The chemical compositions of the glasses were analysed using a modified portable energy‐dispersive X‐ray fluorescence spectrometer (OURSTEX 100FA‐II) by the introduction of a MOXTEK^® AP3.3 polymer window (5 mm²?) to the KETEK silicon drift detector for the measurement of light elements. The non‐destructive analysis was performed at the National Museum, Phuket, in Thailand. It is shown that the glass chemical compositions belong to mineral and plant‐ash based soda–lime–silicate glass. The origins of the glass artefacts are discussed in terms of raw materials and glass decoration, and compared with previously reported similar typological glasses from sites in the port city of Rāya and the Monastery of Wadi al‐Tur in Egypt.     

THE IMPACT OF SOLUBLE SALTS ON THE DETERIORATION OF PHARAONIC AND COPTIC WALL PAINTINGS AT AL QURNA,EGYPT: MINERALOGY AND CHEMISTRY*

The wall paintings of Al Qurna in Egypt were studied by means of XRD and ICP–AES in order to determine their mineralogical and chemical composition, and to evaluate the impact of soluble salts on their deterioration, including the identification of the building materials and pigments used. Soluble salts analysis showed that NaCl is the most common soluble salt in the bedrock, ground water and surface water samples. The building materials are affected by the ground water, while the wall paintings in the area are affected by the Upper Egypt climatic conditions, which were studied in order to detect their role in the deterioration cycle in the area.     

PREHISTORIC WALL PAINTINGS: THE CASE OF THE DOMUS DE JANAS NECROPOLIS (SARDINIA,ITALY)*

The Domus de Janas (Home of the Fairies, or Home of the Witches) are Neolithic hypogea located throughout Sardinia (Italy) and decorated with red and black wall paintings. The objective of this study was to define the painting technique through the analytical characterization of the pigments and binding media. Samples of painting film from different graves have been examined by means of various analytical techniques. XRD, Raman and SEM–EDX analyses identified the red and black pigments respectively as red ochre rich in hematite and carbon black, while GC–MS analyses characterized the organic binder as egg.     

FROM SUSA TO ANURADHAPURA: RECONSTRUCTING ASPECTS OF TRADE AND EXCHANGE IN BITUMEN‐COATED CERAMIC VESSELS BETWEEN IRAN AND SRI LANKA FROM THE THIRD TO THE NINTH CENTURIES AD*

In contrast with artefactual studies of long‐distance trade and exchange in South Asia during the Prehistoric and Early Historic periods ( Ardika et al. 1993 ; Gogte 1997 ; Krishnan and Coningham 1997 ; Tomber 2000 ; Gupta et al. 2001 ; Ford et al. 2005 ), few scientifically orientated analyses have focused on artefacts from the region's Historic period. During excavations at the ancient city of Anuradhapura, Sri Lanka, a number of buff ware ceramics with a putative organic coating on the interior were recovered ( Coningham 2006 ). Dated stylistically to between the third and ninth centuries ad , analysis of the coatings using gas chromatography–mass spectrometry (GC–MS) and stable isotope analysis (carbon and deuterium) confirmed that the coatings are bitumen—an organic product associated with petroleum deposits. There are no known bitumen sources in Sri Lanka, and biomarker distributions and isotopic signatures suggest that the majority of the samples appear to have come from a single bitumen source near Susa in Iran. The relationship between the bitumen coatings and the vessels is discussed, and it is suggested that the coatings were used to seal permeable ceramic containers to allow them to transport liquid commodities. This study enhances our knowledge of networks of trade and exchange between Sri Lanka and western Asia during Historic times.     

THE SMITHSONIAN–NIST PARTNERSHIP: THE APPLICATION OF INSTRUMENTAL NEUTRON ACTIVATION ANALYSIS TO ARCHAEOLOGY

The history and procedures of the Smithsonian–NIST programme in the application of instrumental neutron activation to the study of archaeological materials are reviewed. Statistical processing of the resulting analytical data is a major focus of the programme, with attention called to processes of initial group formation. Specific areas of current research emphasis are presented, which build upon the strength of accumulated databases.     

COOKING AND PAINTED WARE FROM SAN GIUSTO (LUCERA,FOGGIA): THE PRODUCTION CYCLE,FROM THE SUPPLY OF RAW MATERIALS TO THE COMMERCIALIZATION OF PRODUCTS*

Archaeological excavation at the San Giusto site (Lucera, Italy) has unearthed a Late Antique kiln that was most certainly dedicated to the production of cooking ware. An archaeometric study of numerous specimens of cooking and painted ware found at this site was carried out using optical microscopy, scanning electron microscopy, micro‐Raman spectroscopy, X‐ray diffraction, X‐ray fluorescence, inductively coupled plasma mass and optical emission spectrometry and instrumental neutron activation analysis. The integration of historical–archaeological data with archaeometric data has revealed that these specimens can be attributed to the San Giusto site. Furthermore, the production cycle of this ware can thus be reconstructed: from the diversified supply of raw materials (fluvial and marine sediments), to the relatively complex preparation of the paste, to firing at variable temperatures (600–750°C for cooking ware; 850–1050°C for painted ware).     

THOUGHTS ON THE UTILITY OF A BIVARIATE‐SPLITTING APPROACH TO OLMEC CERAMIC DATA INTERPRETATION*

A recently resolved debate centred on the interpretation of a major set of INAA data that was based on Olmec ceramics from Mexico. In an attempt to answer questions arising from the debate, this paper discusses the effect of numbers of samples chosen for data interpretation. It also presents interpretations of the ceramic data set based on a bivariate data‐splitting approach and compares the results of this with the multivariate analysis approaches employed by the initial publishers of the data.