COOKING AND PAINTED WARE FROM SAN GIUSTO (LUCERA,FOGGIA): THE PRODUCTION CYCLE,FROM THE SUPPLY OF RAW MATERIALS TO THE COMMERCIALIZATION OF PRODUCTS*

Archaeological excavation at the San Giusto site (Lucera, Italy) has unearthed a Late Antique kiln that was most certainly dedicated to the production of cooking ware. An archaeometric study of numerous specimens of cooking and painted ware found at this site was carried out using optical microscopy, scanning electron microscopy, micro‐Raman spectroscopy, X‐ray diffraction, X‐ray fluorescence, inductively coupled plasma mass and optical emission spectrometry and instrumental neutron activation analysis. The integration of historical–archaeological data with archaeometric data has revealed that these specimens can be attributed to the San Giusto site. Furthermore, the production cycle of this ware can thus be reconstructed: from the diversified supply of raw materials (fluvial and marine sediments), to the relatively complex preparation of the paste, to firing at variable temperatures (600–750°C for cooking ware; 850–1050°C for painted ware).     

NORTH APULIAN COARSE WARES AND FINE PAINTED WARES: A REAPPRAISAL ACCORDING TO NEW DATA FROM HERDONIA AND CANUSIUM

Late Antique coarse cooking wares and painted fine wares found at Herdonia (second half of the fourth century to mid‐fifth century ad ) and Canusium (late sixth century to early seventh century ad ) have been chemically and mineralogically characterized. A total of 74 samples (40 of coarse ware and 34 of fine painted ware) was investigated through optical microscopy, scanning electron microscopy, X‐ray powder diffraction, inductively coupled plasma optical emission spectrometry, inductively coupled plasma mass spectrometry, neutron activation analysis and X‐ray fluorescence. A new statistical method, namely the classification tree methodology, was used for the treatment of geochemical data. The characterization of the Herdonia and Canusium assemblages was combined with a review of earlier results obtained for San Giusto and Posta Crusta, in order to get an insight on Late Antique ceramic trades in northern Apulia. It appears possible to reconstruct a production pattern organized at multiple production sites, both rural and urban, that exploited similar raw material deposits, specialized in certain productions, and commercialized products at different geographical scales. Imports from outside northern Apulia may be identified for coarse wares. A likely area of production is difficult to establish; however, the northern Adriatic coast and the area of Greece may be suggested.     

A Multidisciplinary Approach to the Study of Archaeological Mortars from the Town of Ammaia in the Roman Province of Lusitania (Portugal)

The Roman town of Ammaia (in Marvão Region) is considered one of the most important recent findings of the Roman presence in Portuguese territory. It was settled in Republican times and abandoned in the seventh century. In this research, 17 masonry mortars and renders from the West Tower (South Gate), the residential area near the West Tower, the macellum, the peristylium, the public bath building, the podium of the temple and the portico of the forum were analysed. The methodology of chemical, mineralogical and microstructural characterization has involved several complementary techniques, including stereomicroscopy, X‐ray diffraction, thermal analysis and scanning electron microscopy coupled with energy‐dispersive X‐ray spectroscopy. The results indicate that the mortars from the beginning of the town's edification were mainly composed of soil (clays). Later, during the main Roman building period, mortars were composed using a calcitic binder and the mortar composition varied according to their use and function. The samples from a period subsequent to the Roman occupation are based on a dolomitic binder. From the present study, relevant information has been acquired about the technological evolution of Roman construction in Ammaia, the historical context of the archaeological structures and guidelines for the conservation and restoration of mortars.     

The production and technology of glazed ceramics from the middle ages,found in the saepinum territory (Italy): a multimethodic approach*

A collection of ceramics from the Middle Ages found in Altilia and Terravecchia (the Saepinum area, Campobasso, Italy) were characterized by using different mineralogical analyses to investigate their provenance and production techniques. The body ceramic was investigated using Rietveld phase analysis of X‐ray powder diffraction patterns, X‐ray fluorescence spectrometry and scanning electron microscopy. The chemical compositions of the coatings were measured by scanning electron microscopy and their mineralogical compositions were determined using a particular technique of X‐ray small‐angle scattering (SAS) optimized for studies of thin films. Moreover, the material used for decoration was studied using micro‐Raman spectroscopy. The archaeometric results confirmed the distinction into two different ceramic classes, already individuated from archaeological analysis: the Altilia objects belong to the protomajolica class, whereas the objects from Terravecchia are RMR (ramina‐manganese‐red) ceramics. A comparison between the chemical and mineralogical compositions of good‐quality ceramic objects and those of waste products indicated local production of the ceramics. A sharp distinction was found in the chemical composition of the coatings: the Altilia products have tin‐opacified lead glazes, while the Terravecchia ones have transparent high‐lead glazes. Among the Altilia products, the unsuccessful process that produced a large quantity of discarded materials was attributed to the high lead content of the glazes. In fact, the principal advantage of the high lead content was to make the preparation and application of the glaze suspension easier, but the risk of reduction of lead oxide to metallic lead was greatly increased. Using micro‐Raman spectroscopy, the following minerals were identified as pigments: pyrolusite for the dark colour, malachite for green, lepidocrocite for yellow and hematite for red.     

THE EGYPTIAN GREEN PIGMENT: ITS MANUFACTURING PROCESS AND LINKS TO EGYPTIAN BLUE*

The chemical and structural analysis of raw Egyptian blue and green pigment cakes and of 50 pigment samples taken from paintings kept in the Louvre Museum was performed using a set of analytical techniques (X‐ray powder diffraction, transmission and scanning electron microscopy, Raman microscopy and UV spectrophotometry). The structural and morphological study of modern samples prepared on the basis of these results has provided technological data that help to explain ancient procedures. The role of the firing temperature, the atmospheric conditions in the furnace and the cooling rate are considered. The difference between Egyptian blue and Egyptian green pigment is proved. Manufacturing processes for their deliberate synthesis are proposed.     

The Belgammel Ram,a Hellenistic‐Roman Bronze Proembolion Found off the Coast of Libya: test analysis of function,date and metallurgy,with a digital reference archive

The Belgammel Ram was found off the coast of Libya in 1964, and examined during 2008–9. The following techniques were used: surface non‐contact digitizing using a laser scanner, reflectance transformation imaging using polynomial texture mapping and hemi‐spherical harmonics, digital photogrammetry with dense surface modelling, structured light optical scanning, and X‐ray fluorescence analysis. For internal structure the ram was examined by X‐radiography and 3‐D X‐ray tomography. Metallurgical composition was studied by micro‐drilling and subjecting the samples to scanning electron microscope X‐ray micro‐analysis, micro X‐ray fluorescence and X‐ray backscatter. The lead isotope composition was analysed. The alloy has average percentage composition Cu = 86.9, Sn = 6.3, Pb = 6.6, and Zn = < 0.10. The Belgammel Ram is probably a Hellenistic‐Roman proembolion from a small military vessel or tesseraria. The archived data are at the Faculty of Engineering and Environment, Engineering Sciences, Material Data Centre, University of Southampton ( muvis@soton.ac.uk ).     

LEAD ISOTOPIC ANALYSIS FOR THE IDENTIFICATION OF LATE BRONZE AGE POTTERY FROM HALA SULTAN TEKKE (CYPRUS)

Lead isotopic compositions were measured for 65 sherds from five pottery wares (Plain White, Coarse, Canaanite, White Slip and Base‐ring) excavated from the Late Bronze Age site of Hala Sultan Tekke (Cyprus). The elemental composition and isotopic signature of the sherds were compared with those of 65 clay samples collected in south‐east Cyprus, mainly in the surroundings (<20 km) of Hala Sultan Tekke. This work shows the effectiveness of using lead isotopic analysis in provenance studies, along with other analytical techniques, such as X‐ray diffraction (XRD) and a scanning electron microscope (SEM) equipped with an energy dispersive X‐ray detection (EDX) facility, to identify the composition of pottery wares and the clay sources used for pottery ware production.     

ARCHAEOMETRIC ANALYSES ON ‘CORINTHIAN B’ TRANSPORT AMPHORAE FOUND AT GELA (SICILY,ITALY)*

The aim of this work is to throw light on the archaic production of ‘Corinthian B’ amphorae, which are widely diffused in the Western Mediterranean basin and are also present in Greece, but whose geographical provenance is still under discussion. We analysed a group of 37 samples belonging to different ceramic classes dated to the sixth and fifth centuries bc . In particular, there were 19 sherds of trade amphorae of the so‐called archaic ‘Corinthian B’ type, from archaeological excavations in Gela (Sicily, Italy). As a comparison, we also investigated 18 samples of tiles and local coarse pottery from Sibari (Calabria, Italy). The samples were analysed using different techniques, such as optical analysis with a polarized‐light microscope (OM), X‐ray diffraction (XRD), Fourier transform–infrared absorption (FT–IR) and inductively coupled plasma–optical emission spectroscopy (ICP–OES). The combination of these complementary analytical methods allowed us to characterize the samples, determine their firing temperatures and identify the probable provenance. The study of thin sections of sherds by OM allowed us to divide the investigated amphorae into two main groups: the first was characterized by a composition that suggested a Western provenance, in particular from the Calabrian–Peloritan region; the second one was very similar to the ‘Corinthian B’ amphorae that come from Corinth and have been classified as ‘fabric class 1’ by Whitbread (1995 ). The XRD and FT–IR results permitted us to determine the mineral composition of the findings and to estimate their firing temperature. The ICP–OES technique was particularly useful in identifying the production centres. In fact, in the studied pottery, this analysis revealed Ni and Cr values that were noticeably different between Greek and southern Italian production.     

A SCIENTIFIC INVESTIGATION ON THE PROVENANCE AND TECHNOLOGY OF A BLACK‐FIGURE AMPHORA ATTRIBUTED TO THE PRIAM GROUP*

The restoration of a Greek black‐figure amphora provided an opportunity to study the provenance and production technology of the vase. The composition of the ceramic body, determined by inductively coupled plasma optical emission spectroscopy (ICP–OES), matches that of Attic products. Investigation by X‐ray diffraction and reflectance spectroscopy suggests a maximum firing temperature around 900°C and a body re‐oxidation temperature around 800°C, respectively. The morphology and composition of black, red and dark red surface areas were studied by scanning electron microscopy and X‐ray energy‐dispersive analysis; the black areas show the features of a typical well‐vitrified black gloss, while the red areas were most probably obtained by simple burnishing of the body; the dark red additions, on the other hand, are the likely result of a partial re‐oxidation of a clay–ochre mixture.     

PETROGRAPHIC AND CHEMICAL CHARACTERIZATION OF POTTERY PRODUCTION OF THE LATE MINOAN I KILN AT HAGHIA TRIADA,CRETE*

Pottery from the Late Minoan I kiln at Haghia Triada in the Mesara Plain, southern Crete, was analysed by a range of techniques, comprising thin‐section petrography, scanning electron microscopy, X‐ray diffraction, X‐ray fluorescence and neutron activation analysis. The project characterizes the ceramic fabrics and probable raw materials, correlates paste recipes with shape, reconstructs the firing conditions of the kiln and establishes a chemical reference group, taking into account post‐burial alteration and contamination. Comparison of the reference group formed with that from the neighbouring, broadly contemporary, kiln at Kommos shows an unexpected differentiation of the two kilns.     

SCIENTIFIC INVESTIGATION OF FAIENCE FRAGMENTS ATTRIBUTED TO THE TOWN MOSAIC AT KNOSSOS*

We analysed a faience fragment from Bristol Museum and Art Gallery, to determine whether it belonged to the Town Mosaic, excavated at Knossos. Three Town Mosaic fragments from the Ashmolean Museum, Oxford were also examined. The objects were analysed using non‐destructive variable‐pressure scanning electron microscopy with energy‐dispersive X‐ray spectrometry. The Bristol object's composition and microstructures are similar to those of the Town Mosaic samples. Our results are also comparable to those from polished samples of Minoan faience (Tite et al. 2009 ), showing that VP SEM–EDX gives reliable results without invasive sampling. Silicaceous, copper‐rich microspheres were identified for the first time in two of the Ashmolean objects.     

CHARACTERIZATION OF ARCHAEOLOGICAL AND IN SITU SCOTTISH WINDOW GLASS

Scottish window glass from both archaeological sites and historic buildings was examined using portable X‐ray fluorescence (pXRF) and scanning electron microscopy – energy‐dispersive X‐ray micro‐analysis (SEM–EDX). The elemental composition of the glass provides information regarding the materials used and, subsequently, an approximate range of dates of manufacture. pXRF is shown to be more vulnerable than SEM–EDX to the effects of surface corrosion and matrix effects in archaeological samples. The study showed that the production of window glass in Scotland from the 17th century onwards appears to closely parallel that in England. It also demonstrated the potential of pXRF for in situ studies of window glass in historic buildings. pXRF was used to assess two Scottish buildings; one in state care and one in private ownership. The building in state care, the Abbot's House at Arbroath Abbey, showed a uniform glass type, suggesting that the building was re‐glazed completely at some point during the late 19th or early 20th century. The building in private ownership, Traquair House, had a range of glass types and ages, demonstrating a different maintenance and repair regime. This type of data can be useful in understanding historic buildings in the future, particularly if re‐glazing is being considered.     

MULTIANALYTICAL STUDY OF PALAEOLITHIC REINDEER ANTLER. DISCOVERY OF ANTLER TRACES IN LASCAUX PIGMENTS BY TEM*

Palaeolithic and modern reindeer antler were analysed using complementary techniques to evaluate the conservation state of bone material. X‐ray diffraction, FT‐IR spectroscopy, scanning electron microscopy (SEM–EDX) and transmission electron microscopy (TEM–EDX) as well as proton induced X‐ray and γ‐ray emission (PIXE–PIGE) at the particle accelerator AGLAE, C2RMF were applied. This study enabled us to define the chemical and structural features of ancient antler at the micro‐ and nanometre scale and compare them to those of other bone materials such as bone and ivory. Antler is richer in its organic fraction compared to bone and ivory. Its mineral fraction, carbonated hydroxylapatite, shows very specific crystal shapes at the nanometre scale. This specific property allowed us to recognize antler traces in pigment samples originating from rock art paintings in the Lascaux cave, Dordogne, southwestern France, Magdalenian period. Therefore, TEM–EDX is the technique of choice for characterizing antler traces in complex mixtures. In the paint material of Lascaux, antler seems most likely to be a pollutant introduced either by stirring the pigments in water with a piece of antler or by carving antler artefacts next to the preparation of paint material. However, it could eventually be used as a marker of paintings that were created contemporaneously.     

ANALYTICAL CHARACTERIZATION OF ROMAN PLASTERS OF THE ‘DOMUS FARINI’ IN MODENA*

The paper refers to the analytical characterization of Roman painted plasters dating back to the second century ad . The following techniques were used: optical microscopy (OM), scanning electron microscopy (SEM–EDS), micro‐Raman and Fourier transform infrared spectroscopies (µ‐Raman and FT–IR), X‐ray diffraction (XRPD), colorimetry and thermal analyses (TG/DTA). The investigation analysed the chemical composition and structure of the plasters, the chemical composition of the pigment layers, the use of binders and any chemical alteration of pigments as well as deterioration of the samples. Stratigraphic analysis of plasters allowed identification of their individual components, which proved helpful in finding out more about the mural painting technique employed.     

BYZANTINE OPAQUE RED GLASS TESSERAE FROM BEIT SHEAN,ISRAEL*

This paper presents the results of analysis of Byzantine opaque red glass tesserae derived from three separate locations in the ancient city of Beit Shean, Israel. Investigation proceeded using reflective light microscopy, energy dispersive X‐ray fluorescence and energy dispersive scanning electron microscopy. The glass matrix of the tesserae was found to be heterogeneous, with many inclusions. Similarities and differences between tesserae from the two mosaics are examined and discussed. Implications for locale of manufacture and production techniques are considered. Comparisons between the three locations led to conclusions about the use of the tunnel as a storage site and the implications of this for future research on mosaics.     

MINERO‐PETROGRAPHIC STUDY OF COOKING WARE AND POMPEIAN RED WARE (ROSSO POMPEIANO) FROM CUMA (SOUTHERN ITALY)

Excavations carried out in Cuma by the Centre Jean Bérard archaeologists have uncovered a large quantity of pottery. This study is focused on cooking ware and on internal red‐slip cookware, also known as Pompeian Red Ware (Rosso Pompeiano), dated from the first century bc to the first century ad . A comparison with the minero‐petrographic composition of beach sands collected along the Bay of Naples coastline highlights the provenance of the temper from the Somma‐Vesuvius area, marked by leucite‐bearing scoriae and garnet. Petrochemical analyses allow us to distinguish two main groups of pottery characterized by different technological options based on the amount of temper and on the type of clay. X‐ray diffraction and scanning electron microscope data demonstrate improved accuracy in the production of Rosso Pompeiano, especially with regard to firing control, which was in a prevailing oxidizing atmosphere and in a narrow thermal range, between about 800 and 900°C.     

The dark colour of the Ploutonion at Hierapolis of Phrygiae (Turkey)

The dark colour of some excavated architectural elements of the Ploutonion, in the archaeological site of Hierapolis of Phrygiae (Turkey), was investigated. The Ploutonion, visited by numerous ancient writers, such as Cicero and Strabo, was a sanctuary dedicated to Pluto and Kore, constructed during the early Imperial period above the entrance to a natural cave, from which thermal waters and poisonous gases emerge. It was used for sacred rituals: sacrifices, incubation and healing. A multi‐analytical approach (X‐ray diffraction, X‐ray fluorescence, optical and electronic microscopy, and chemical analyses of the thermal spring water) was used in order to define the composition and origin of darkening phenomena of some architectural elements of the Ploutonion.     

CYPRIOT BYZANTINE GLAZED POTTERY: A STUDY OF THE PAPHOS WORKSHOPS

Twenty‐five samples of Byzantine glazed pottery from two archaeological sites between Limassol and Paphos region (Cyprus), dated between the 12th and 15th century ad were studied using micro X‐ray fluorescence spectroscopy, scanning electron microscopy and X‐ray diffraction analysis. It was found that all the glazes contain lead, following the main manufacturing process of medieval pottery in the Mediterranean territory, while some of them contain tin, possibly for better opacity. Furthermore, it is shown that copper, iron and cobalt with nickel are responsible for the decoration colours. Finally, the application of principal component analysis revealed significant differentiation for some of the samples.     

COLOURED OPAQUE GLASS BEADS OF THE MEROVINGIANS*

Monochrome coloured opaque glass beads of the Merovingians have been examined by different analytical methods. A large number of mostly unprepared beads have been measured by X‐ray fluorescence analysis. X‐ray diffraction was used for the identification of the crystalline colouring and opacifying pigments, and electron probe micro‐analysis as well as scanning electron microscopy were applied to study the composition and the microstructure of a white, brown, green, orange and yellow glass bead. After subtracting the content of colouring oxides of the glass beads and normalizing the residual values to 100% an identical soda‐lime‐glass matrix was obtained. The origin of the colouring metal oxides is discussed.