Determining the Firing Temperature of Low‐Fired Ancient Pottery: An Example from the Donghulin Site,Beijing, China

The traditional thermal expansion method using a dilatometer fails to accurately determine the original firing temperatures of low‐fired ancient pottery. For this reason, we have developed an improved method of determining firing temperatures for low‐fired pottery. This paper explains the theory of the improved method and presents the reasonably satisfactory results obtained on ancient pottery from the Donghulin site (c. 10 000 bp ). The method and the results are very important for the study of ancient pottery culture and clay moulds used for bronze casting.     

LEAD ISOTOPIC ANALYSIS FOR THE IDENTIFICATION OF LATE BRONZE AGE POTTERY FROM HALA SULTAN TEKKE (CYPRUS)

Lead isotopic compositions were measured for 65 sherds from five pottery wares (Plain White, Coarse, Canaanite, White Slip and Base‐ring) excavated from the Late Bronze Age site of Hala Sultan Tekke (Cyprus). The elemental composition and isotopic signature of the sherds were compared with those of 65 clay samples collected in south‐east Cyprus, mainly in the surroundings (<20 km) of Hala Sultan Tekke. This work shows the effectiveness of using lead isotopic analysis in provenance studies, along with other analytical techniques, such as X‐ray diffraction (XRD) and a scanning electron microscope (SEM) equipped with an energy dispersive X‐ray detection (EDX) facility, to identify the composition of pottery wares and the clay sources used for pottery ware production.     

CHALLENGES IN THE ANALYSIS OF HETEROGENEOUS POTTERY BY LA–ICP–MS: A COMPARISON WITH INAA*

Tempers added to pottery have the potential to obscure geographical variation in the chemistry of exploited clay resources when analysed using bulk methods. A pilot study was conducted to assess the possibility of using LA–ICP–MS to analyse clay matrix in pottery with extremely subtle partitions between INAA chemical groups. LA–ICP–MS was used to analyse the clay matrix of 32 pottery samples from seven Middle and Late Woodland period (c. ad 200–800) sites in north‐east Florida and results were compared to data from INAA of the same samples. The results reveal many of the challenges in analysing highly heterogeneous materials with LA–ICP–MS. However, the study also generated data that are potentially useful in the determination of pottery provenance. In some respects, LA–ICP–MS of clay matrix replicated the chemical variation recorded by INAA, and in other respects the results are divergent. The similarities and differences between these results are explained by specific differences between the methods and the materials analysed (matrix versus bulk analysis). Suggestions for improving the method are discussed.     

Anglo‐Saxon Style Pottery from the Northern Netherlands and North‐Western Germany: Fabrics and Finish,Regional and Chronological Patterns,and their Implications

This paper presents the results of a study of Anglo‐Saxon style pottery in the northern Netherlands and north‐western Germany, involving macroscopic and microscopic analysis of fabrics and finish. Both regions show similar developments in form and decoration in the pottery of the fourth and fifth centuries ad , the late Roman and Migration period, resulting in the typical decoration and shapes that are known as the Anglo‐Saxon style. In the northern Netherlands, this style is traditionally associated with Anglo‐Saxon immigrants. It has, however, been suggested that this style was, rather, part of an indigenous development in areas in the northern Netherlands where occupation was continuous, though influenced by stylistic developments in north‐western Germany. That hypothesis is supported by the analysis of fabrics and finish presented here. The characteristic of fabrics and surface treatment indicate technological continuity. The use of local clay sources for Anglo‐Saxon style pottery and for contemporary regional types indicates that most of the Anglo‐Saxon style pottery in the northern Netherlands was not brought by Anglo‐Saxon immigrants or as imports, but must have been made locally. That applies to settlements with continuous habitation, as well as settlements in the coastal area that were not inhabited during the fourth century ad .     

POTTERY TECHNOLOGY AT THE CHALCOLITHIC SITE OF TELEILAT GHASSUL (JORDAN)

Sherds from the Chalcolithic levels at Teleilat Ghassul show evidence of a considerable degree of sophistication in pottery technology and design. The bodies are almost certainly made from a siliceous illitic clay which contained some calcium carbonate, and was obtained locally. Some unusual, yet common, sherds are composed of highly vitrified black bodies with a surface wash of a refractory white clay. These sherds indicate the production of one of the earliest known totally vitrified ceramic fabrics. The latter sherds have been examined in some detail by chemical, thermal and X-ray analysis, and optical and scanning electron microscopy.     

THE BEGINNINGS OF ISLAMIC STONEPASTE TECHNOLOGY*

A multidisciplinary programme of research on Islamic pottery has been focused on questions of the dating, provenance and technology of Islamic pottery. One particular question has been the development of stonepaste, a material made primarily of crushed quartz with added frit-glass and clay. The combination of the different approaches of this study has revealed early foundations for the technology in ninth-century AD Iraq, apparently originating in the clay ceramic rather than the ‘Egyptian faience’ tradition. Subsequent and final practice developed in tenth- and eleventh-century AD Egypt. This technology becomes the primary body for all fine Islamic ceramics.     

Coupling lead isotope analysis and petrography to characterize fabrics of storage and trade containers from Hala Sultan Tekke (Cyprus)*

Lead isotopes, thin‐ and sherd‐section analyses are coupled on pottery‐vessel fragments excavated from the Late Bronze Age site of Hala Sultan Tekke (south‐east Cyprus) and representing fabrics used for the production of storage and trade containers. The fabrics of the sherds are first described according to general macroscopic observations. Based on the different fabrics identified, a petrographic analysis is carried out on thin sections and compared to lead isotope results on the same samples. This study shows that a specific fabric corresponds to a specific lead isotopic composition and proposes different sources for the various groups of associated sherds/fabrics. It also demonstrates the compatibility and complementarity of petrography and lead isotopes within pottery provenance study.     

MINERO‐PETROGRAPHIC STUDY OF COOKING WARE AND POMPEIAN RED WARE (ROSSO POMPEIANO) FROM CUMA (SOUTHERN ITALY)

Excavations carried out in Cuma by the Centre Jean Bérard archaeologists have uncovered a large quantity of pottery. This study is focused on cooking ware and on internal red‐slip cookware, also known as Pompeian Red Ware (Rosso Pompeiano), dated from the first century bc to the first century ad . A comparison with the minero‐petrographic composition of beach sands collected along the Bay of Naples coastline highlights the provenance of the temper from the Somma‐Vesuvius area, marked by leucite‐bearing scoriae and garnet. Petrochemical analyses allow us to distinguish two main groups of pottery characterized by different technological options based on the amount of temper and on the type of clay. X‐ray diffraction and scanning electron microscope data demonstrate improved accuracy in the production of Rosso Pompeiano, especially with regard to firing control, which was in a prevailing oxidizing atmosphere and in a narrow thermal range, between about 800 and 900°C.     

Archaeometric Investigation of Medieval Pottery from Excavations at Novo Brdo,Serbia

Medieval pottery from excavations at Novo Brdo, Serbia, an important mining and trading centre during the 14th and 15th centuries, was investigated by a combination of optical microscopy, inductively coupled plasma – optical emission spectrometry, Fourier transform infrared, micro‐Raman and energy‐dispersive X‐ray fluorescence spectroscopy and X‐ray powder diffraction methods in order to determine its composition and firing temperature. The samples investigated were made of medium‐ to coarse‐grained, non‐calcareous clay, by a relatively well‐controlled firing procedure in an oxidizing atmosphere. The firing temperature was estimated to be 850–950°C. The similarity between the chemical composition of the investigated pottery and the local raw clay, combined with the outward appearance and the archaeological findings, indicate domestic production. The pottery is covered with the transparent lead‐rich glaze. Iron and copper were used as colourants.     

Chemical and Petrographic Analysis of Pre‐Hispanic Pottery from the Southern Abaucán Valley,Catamarca, Argentina

Neutron activation (NAA) and petrographic analyses were carried out on Late and Inca Period pottery from 15 archaeological sites and several clay samples in the southern Abaucán Valley, Catamarca, Argentina. The results from the NAA and petrographic analyses provide new data concerning local versus non‐local pottery production and vessel exchange for these two pre‐Hispanic cultural periods. The chemical data demonstrate the use of different clay sources over time until the Inca appearance in the region, when a more structured and controlled production is observed. Petrographic analyses show a similar change in the ceramic paste recipes used by ancient potters.     

A pottery workshop with flint tools on blades knapped with copper at Nausharo (Indus civilisation, ca. 2500 BC)

Twenty years after its discovery, the pottery workshop of Nausharo (province of Baluchistan, Pakistan), which yielded a series of knapped stone tools in association with unbaked sherds and clay waste, is still of unique importance in Asian protohistorical studies. The types of pottery production (sandy marl fabrics) identified in this workshop, which is dated to ca. 2500 BC, correspond to the majority of the domestic pottery discovered at the site during the first two phases of the Indus Civilisation. The flint blades discovered in the workshop were made from exotic flint, coming from zones close to the great Indus sites such as Mohenjo-Daro and Chanhu-Daro. This is also the origin of a small amount of the pottery (micaceous fabrics) found at Nausharo in domestic contexts, e.g. Black-Slipped-Jars. The butts of the blades display features characteristic of pressure detachment with a copper pressure point. Gloss and microwear traces (polish) testify to the blades' having been used for finishing the clay vessels: for actual finishing (trimming) while they were being turned on a wheel, and possibly also for scraping by hand. Both of these operations are distinctly attested to by the presence in the workshop of two different types of clay shavings.     

Oil Lamps from the Catacombs of Canosa (Apulia,Fourth to Sixth Centuries AD): Technological Features and Typological Imitation

Fifty oil lamps from the catacombs of ‘Ponte della Lama’ (Canosa di Puglia, second to sixth centuries ad ) were analysed to understand the correlations existing between types and fabrics and to determine their provenance. Petrographic and chemical analyses confirmed the archaeological hypothesis of local production of the oil lamps, using fluvial deposits. However, the three samples of oil lamps imitating the African ‘Atlante VIII’ are considered chemical outliers compared to the rest and are supposedly of foreign origin. The extensive and original repertory of lamp types characterizes Canusium as the production centre in the late Roman period.     

CHEMICAL ASSAYS OF TEMPER AND CLAY: MODELLING POTTERY PRODUCTION AND EXCHANGE IN THE UPLANDS NORTH OF THE PHOENIX BASIN,ARIZONA, USA*

A lack of mineralogical variation characterizes the prehistoric pottery in the uplands of central Arizona. Virtually all of the ceramics in that region were tempered with phyllite, which has previously precluded provenance analyses and the investigation of pottery production and distribution in the upland zone. As shown with assays with an electron microprobe, however, both the clay fraction and the temper fragments are chemically diverse and geographically distinct, allowing many of the phyllite‐tempered wares to be sourced, thereby leading to models about the organization of ceramic production and exchange in the upland zone north of the Phoenix Basin.     

Ceramic production,consumption and exchange in the Banda area,Ghana: Insights from compositional analyses

Ceramic production, exchange and consumption in the Banda area, west central Ghana has been affected by historical developments ranging from recent competition with alternative vessels (made of metal and plastic) to political economic upheavals that altered community relationships within and outside the region. In this study, we explore spatial and temporal patterning in pottery production, exchange and consumption using a combination of analytical techniques. Instrumental neutron activation analysis (INAA) of a large sample (491 specimens) of archaeological and ethnographic pottery, clay and temper samples from sites across the Banda area has led to the identification of seven compositional groups whose differential distribution implies shifts in resource selection through the last thousand years. Laser ablation-ICP-MS analysis was used to explore the effects of distinctive tempering agents (crushed slag) on the bulk chemical signature of a subset of Banda ceramics, while petrographic analysis provides insight into the preparation of ceramic fabrics. We integrate insights from these diverse physical studies to investigate the dynamics of pottery production, exchange and consumption over the course of the last millennium in the Banda area and explore potential linkages with broader political economic transformations.     

TESTING ASSUMPTIONS OF NEUTRON ACTIVATION ANALYSIS: COMMUNITIES,WORKSHOPS AND PASTE PREPARATION IN YUCATAN,MEXICO*

Contemporary pottery and raw materials (N= 170) from three workshops in Ticul, Yucatán, were analysed by neutron activation to test the hypothesis that individual workshops that used their own clay sources could be identified by their pottery. Although the data failed to confirm the hypothesis, the results reinforced previous conclusions about the relationship of local communities of potters to the chemical patterning of pottery made in these communities.     

THE IMPORTANCE OF THE ‘BEST RELATIVE FIT FACTOR’ WHEN EVALUATING ELEMENTAL CONCENTRATION DATA OF POTTERY DEMONSTRATED WITH MYCENAEAN SHERDS FROM SINDA,CYPRUS

Neutron activation analysis of pottery was established at Bonn in 1983 and has since become one of the primary archaeometry‐based analytical techniques at the facility. A brief history of the laboratory and a discussion of the best relative fit procedure for pottery is provided. When comparing concentration data for pottery, a best relative fit should always be considered. This mathematical procedure generally results in ‘sharper’ concentration patterns and improves the separability of chemically not very different compositional groups. This is demonstrated for a set of 30 Late Cypriot (Myc. IIIC1) pottery samples from Sinda, Cyprus, which allow formation of a good reference pattern for this site. Applying factors in the range of 0.82–1.43, a number of samples from Egypt and Palestine can be assigned with high probability to a Cypriot origin.     

The technology and production of glazed ceramics from Middle Islamic Jerash,Jordan

Jerash in northern Jordan was, despite a focus on its classical heritage, also active in the Middle Islamic period, but little is known about actual developments during this period. This study represents the first study on the Middle Islamic glazed pottery from the site using scanning electron microscopy energy‐dispersive spectrometry (SEM‐EDS) and thin‐section petrography. The results show that two production traditions existed, each with different provenances. The local production is characterized by a non‐calcareous ceramic body and the use of a high‐lead glaze coloured with iron and copper oxides, whereas the turquoise‐glazed samples, likely imported from Mesopotamia, have a calcareous ceramic body and alkali or alkali‐lead glaze.     

STATISTICAL ASPECTS OF POTTERY QUANTIFICATION FOR THE DATING OF SOME ARCHAEOLOGICAL CONTEXTS*

This paper describes some statistical analyses of a particular archaeological material (pottery) originating at some sites in the city of Tours. An important part of the archaeological study of pottery is the comparison of ceramic assemblages to establish the absolute dates of contexts. In this paper, a statistical model is built to assess this comparison. The statistical procedure uses classical tools (correspondence analysis, linear regression and resampling methods) in an iterative scheme. Archaeologists may find in the paper a useful set of known statistical methods, while statisticians can learn a method of ‘arranging’ well‐known techniques. No method is new, but their combination is characteristic of this application.     

Ancient Egyptian Pottery from the Subsurface Floodplain of the Saqqara–Memphis Area: Its Mineralogical and Geochemical Implications*

Potsherds recovered from the Saqqara–Memphis floodplain in Egypt, dated according to their typology and radiocarbon dating of the included sediments, are analysed geochemically and mineralogically to identify source materials and fabrication characteristics. Pottery layers were identified and potsherds were recovered from several settlement levels. Sherd typology was used to identify sherds from four periods (the Old and New Kingdoms, and from the Late Period to the Ptolemaic). The Pharaonic pieces were found at depths of between 8 and 12 m and the later material was between 6 and 3 m. Chemical analyses of the potsherds revealed three main source materials: local Nile silt, marl clay and mixed Nile silt–marl. Two marl clay types were recognized: marl clay from Upper Cretaceous marine sediment and another one from Late Pliocene deltaic sediments. The mineralogical composition of the pottery samples shows that the estimated firing temperature was about 850–900°C. No consistent differences in sherd mineralogy and geochemistry were found according to pottery types, so that the ancient Egyptian potters used essentially the same materials throughout the Pharaonic period. However, this initial study has revealed the existence of extensive pottery‐rich occupation sites buried within the Nile floodplain deposits between Memphis and Saqqara.     

CHARACTERIZATION AND THERMOLUMINESCENCE DATING OF PREHISTORIC POTTERY SHERDS FROM MILENA

This paper reports the results obtained applying absolute dating methodologies and mineralogical, petrographical and micropalaeontological characterization techniques to prehistoric pottery sherds varying in age from the Sicilian Middle Neolithic to Bronze Age. All samples came from the archaeological area of Milena (Caltanissetta, Sicily); those of the Bronze Age were found on a site with a precise stratigraphic succession. The investigation has contributed to the determination of an absolute chronology for the Milena prehistoric period. The data provide, for the first time in Sicily, absolute dates covering a wide spectrum of cultures following one another in the same area and, for the Bronze Age site, correlated to the precise stratigraphic succession. The petrographical and mineralogical analyses allowed not only the identification of the principal constituents of the pottery, but also the formulation of some hypotheses regarding the specific manufacturing techniques of different epochs. The microfacies, obtained from the presence of fossils in the groundmass of the pottery, were also analysed and compared with the microfauna present in the Miocene clays outcropping in the area. The data identified local Messinian clay as the raw material probably used in the manufacture of the pottery and also support the presence, already assumed by archaeologists, of imported Mycenaean pottery, thus supporting the dates obtained on pottery taken from the same stratum.