Moving Closer to the Fire: Heat Transformations and Bucket‐Shaped Pots in Burials

Archaeological discourse reveals an appreciation of the potentially deeply intertwined relationship between the life histories of human beings and material culture. I argue that the intimacy between lived experience and things is a vital source for understanding symbolic meaning – that the bodily experienced everyday interaction enables close associations between humans and material culture, in this case bucket‐shaped pots in graves. The consistent representation in Migration Period burials from western Norway has led to the contention that there are reasons to believe that there may have been only one bucket‐shaped pot for each person buried. Provenance and technological influence is often demonstrated as a function of surface similarity between bucket‐shaped pots and other material forms, leading to notions of ‘wandering’ surfaces which become passively copied templates. As a result, causality is left elsewhere than in the technological choices made and the factors involved in shaping the pots' social lives after manufacture. An emphasis on heat transformations and ceramic technology within a wider social context enables us to discuss bucket‐shaped pots in burials both as symbolic elements in material assemblages and as ontological metaphors intimately associated with the deceased.     

Reverse Engineering the Ceramic Cooking Pot: Cost and Performance Properties of Plain and Textured Vessels

Ceramic cooking pots throughout the world vary in exterior surface treatment from smooth to roughly textured. An intriguing example of this variation occurred in the Puebloan region of the southwestern United States where cooking pots changed from scraped plain to highly textured, corrugated vessels between the seventh and eleventh centuries AD, and then reverted back to plain-surfaced by the fifteenth century. To investigate potential cost and performance differences between plain and corrugated cooking pots, a set of controlled experiments were performed, which document manufacturing costs, cooking effectiveness, and vessel durability. These experiments indicate that while corrugation may have increased manufacturing costs, neck corrugations improved vessel handling, upper body corrugations yielded greater control over cooking, and basal corrugations extended vessel use-life. Discerning the explanatory significance of these results for cooking pot change in the Southwest and elsewhere requires additional data on the contexts in which these pots were made and used.     

Differentiation of ceramic chemical element composition and vessel morphology at a pottery production center in Roman Galilee

Cooking pots and bowls from two production locations ca. 200 m from each other at the rural settlement of Kefar Hananya in Roman Galilee were compared employing chemical element composition and vessel-shape analyses. Splits of each pulverized sample, all of which were taken from ceramic wasters, were analyzed by both instrumental neutron activation and high-precision X-ray fluorescence analyses, and computerized vessel-shape analysis was employed for morphological analysis of the same vessel forms from each location. Several statistical techniques (bivariate plots, principal component analysis, cluster analysis and discriminant analysis) were used for analyzing the resultant data. It was found that both the cooking pots and bowls made at each location could be distinguished by employing either chemical composition or morphological analysis. The implications of this work, with regard to investigating both production and consumption sites, and for pottery provenance studies, are discussed. The findings suggest that these analytical techniques can be useful as an aid for chronological differentiations of archaeological pottery.     

TECHNOLOGY AND COLOUR DEVELOPMENT OF HISPANO-MORESQUE LEAD-GLAZED POTTERY

Lead-glazed pottery from the medieval workshop of Les Olleries Majors (Paterna, Spain) has been studied by Mössbauer spectroscopy, X-ray diffraction, X-ray fluorescence and optical spectroscopy. Yellow, brown and honey-coloured glazes occur on pots glazed on only one surface. They have virtually identical compositions and transmittance spectra, their apparent differences in colour are due to the colours of the underlying pastes. Yellow glazes occur on cream-coloured calcareous bodies, honey-coloured glazes occur on less calcareous bodies with some development of hematite, while brown glazes occur on red siliceous cooking-pots. Green glazes are found on pots glazed on both surfaces; the glazes trapped CO₂ evolved by decomposing carbonates, resulting in an internal reducing environment. This caused the reduction of iron to the ferrous state which coloured the glaze green by diffusion.     

Production centers of cooking pots in Iron Age Judah

This paper will present and discuss a multifaceted research project dealing with the production of cooking pots during the Iron Age II (ca. 1,000–586 BCE) Judah (modern Israel). In particular the new compositional analysis of 541 cooking vessels from 11 sites in Iron Age Judah will be presented. The study employs petrographic and chemical (NAA) analysis. The results of this ongoing research have already produced interesting information about production centers and movements of cooking pots in Iron Age II Judah. Apparently, the vast majority of the cooking pots sampled were made of a similar type of clay, related to terra rossa soil. This is true also for sites in the northern Negev and Judean Desert, where the type of soil was not available in the region of the sites. Furthermore, many of the cooking pots distributed around Judah were made in Jerusalem according to a well-located chemical profile (JleB). Other groups may represent Judean Shephelah production centers as the Lachish area as well as production centers in southern Israel or ancient Edom. The implications of the importation patterns of cooking pots by peripheral Judean sites will be discussed.     

POTS, HOUSES AND METAL: TECHNOLOGICAL RELATIONS AT THE BRONZE AGE TELL AT SZÁZHALOMBATTA, HUNGARY

Summary.   At the Bronze Age tell of Százhalombatta, Hungary, techniques used for making pottery echo those used in other media. Pottery and architecture have a close relationship. Not only were both made of clay, but methods of making pots echo those used for building. Similarly, pottery and metalwork share common themes and technologies for working with clay and bronze. Since choices made by potters are not solely confined to the environment, raw materials and tools, but are also socially and culturally defined, by implication the transfer of know-how must be situated within social networks between people. This paper considers how the identification of technical relationships between different media at Százhalombatta can be used to explore social relations in Bronze Age society, thereby suggesting relationships that work on both technical and social levels.     

Cultural and trade practices in Sincu Bara (Senegal): a multi-proxy investigation

The Sincu Bara site in Senegal is one of the most famous archeological sites in Western Africa. Here we present the results of a multi-proxy study that combined microscopic analyses, carbon content, stable carbon isotope (δ¹³C) and radiocarbon (¹⁴C) measurements. This investigation exhibits a chronological framework in two phases: from 400 yr AD to 650 yr AD and 650 yr AD to 900 yr AD. Furthermore, it shows that besides basic potteries, some potsherds are notable for a temper exclusively made with human-harvested C4 plants. Finally, the ¹⁴C analysis performed on the organic slip strongly indicates the use of bitumen or bitumen-derived products for red slip preparation. This suggests the establishment of trade relationships with Nigerian and/or Trans-Saharan populations as early as 400 yr AD.     

Post-depositional surface whitening of ceramic artifacts: alteration mechanisms and consequences

Surfaces on ceramic artifacts that are paler than the main sherd body are commonly interpreted as slips that were intentionally applied by the potter during the manufacturing process. However, due to post-depositional alteration, sherds that were not originally coated with a slip may macroscopically appear with deceptively similar pale surfaces. This paper presents a comparison of two sherds, both with pale to white surfaces, one of which is a real slip and the other a surficial corrosion that occurred during the burial stage. Observations using optical and scanning electron microscopy, as well as electron-probe image- and microanalysis, clearly illustrate the features of the two surfaces, as well as demonstrating their causes and effects. The superimposed slip is clearly delimited from the sherd body by a denser and much finer-grained fabric, in which clay minerals predominate and porosity is reduced by about 20% compared to the body. In the other sample, surface corrosion, due to invading fluids, has led to leaching of calcareous constituents and results in a remarkable increase in porosity close to the rim (ca. 25%). Sometimes called the “espresso crema effect” (Tschegg et al., 2009b), the surface becomes considerably brighter than the core and can easily be confused with intentional slips. This, as a consequence can lead to significant misinterpretations, to erroneous sherd characterizations and classifications, as well as to incorrect assignments to specific ware groups.     

Strength,Toughness and Thermal Shock Resistance of Ancient Ceramics,and Their Influence On Technological Choice

The basic underlying theory for the strength, toughness and thermal shock resistance of brittle multiphase clay ceramics, together with the measurement procedures to determine these parameters, are first outlined. Published experimental data obtained for test bars containing different types of temper and fired to a range of temperatures are then compared both with theoretical predictions and between themselves. The results confirm that to produce pottery with high strength requires high firing temperatures and low temper concentrations. Conversely, to produce pottery with high toughness and thermal shock resistance requires low firing temperatures and high temper concentrations, with platy or fibrous temper being most effective. There is no convincing published evidence that strength and toughness requirements were a significant factor in determining the technological choices (clay type, temper type and concentration, and firing temperature) in the production of pottery used as containers for transport and storage. In contrast, the routine use of high temper concentrations and low firing temperatures in the production of cooking pots suggests that the requirement for high thermal shock resistance was a factor that at least influenced technological choice in this case. In addition, there is some evidence that limestone and shell were, on occasions, deliberately chosen as temper in cooking pots. The need to take into account the crucial role that the full range of environmental, technological, economic, social, political and ideological factors have in influencing technological choice is also emphasized. This review highlights the fact that our current understanding of the factors determining strength, toughness and thermal shock resistance of clay ceramics is still far from complete. Further systematic measurements of these parameters, together with the establishment of a systematic database of the range of technological choices associated with the production of cooking pots, are therefore to be encouraged.     

Residents' Spatial Knowledge of Neighborhood Continuity and Form

This paper discusses residents' cognition of neighborhood form in terms of linear-based and areal-based knowledge structures. Cognitive and behavioral data are used to create surfaces of residents' familiarity with, and experience of, a neighborhood in San Diego, California. The complexity of the data required the topological and relational sophistication of an ARC / INFO-based geographic information system. Cellular-based data were collected to identify place-specific measures of residents' familiarity and experience within the community. The cellular data facilitated aggregation of residents' cognitive surfaces as absolute spaces, and also relative to their homes. Spatial autocorrelation and directional autoregression techniques are used in association with standard cognitive mapping to establish the continuity and form of residents' familiarity and experience with their neighborhood. The findings suggest that there is a structural difference in the spatial familiarity of residents who perceive their neighborhood as an area and those who perceive it as a network. North-south and east-west street networks played an important part as the basis for both linear-based and areal-based knowledge, but noncardinal directions were more prominent in the familiarity surfaces of those residents who had an areal-based perception of neighborhood form. In terms of theories of spatial knowledge acquisition, the findings suggest that (i) there may not be a direct sequential link between linear-based and areal-based knowledge structures, (ii) knowledge of a complex network may not be sufficient to provide areal-based knowledge, and (iii) an areal-based knowledge structure does not necessarily comprise an understanding of survey procedures.     

Galilee Blooming: First palynological and archaeological data from an Early Byzantine Cistern at Horvat Kur

Abstract

Preliminary archaeological and palynological results are presented from an early Byzantine cistern of the village Horvat Kur in eastern Lower Galilee/Israel. The rural site was settled from the Hellenistic until the Early Arab period, its synagogue was constructed shortly after 425 AD and renovated sometimes during the 2nd half of the 6th century AD. It was abandoned probably as a consequence of the earthquake of 749 AD. The intact and properly sealed cistern contained complete or fully restorable pottery. Two cooking pots from the early 5th century AD comprised sediments which was sampled for palynological purposes. Both samples, as well as a sample from the soil beneath one of the pots and a modern surface sample from the site, revealed well preserved palynomorphs in comparably high concentration showing a great potential of the cistern as a pollen archive. The pollen content points to an open, grassy semiarid landscape with an apparent scarcity of cultivars and trees in the vicinity of the site and an abundance of herbs, especially Asteraceae, which are still commonly found in modern regional vegetation.     

THE TECHNOLOGY OF ‘GLAZED’ RESERVED SLIP WARE—A FINE CERAMIC OF THE HARAPPAN PERIOD*

‘Glazed’ Reserved Slip Ware (RSW) is a high‐quality glossy bichrome pottery of the Indus Valley civilization, and dates to the mature Harappan period (c. 2600–1900 bc ). Scanning electron microscopy with energy‐dispersive X‐ray analysis indicates that the surface coat on RSW is composed of a pale grey vitrified clay slip, which overlies a black slip with significantly higher iron oxide. Hence the term ‘sintered’ Reserved Slip Ware is to be preferred. X‐ray diffraction analysis indicates that both the pale and black slips contain hercynite, mullite and quartz, but observation by scanning electron microscopy shows that the black slips contain higher amounts of coarser‐grained hercynite. The elemental data suggest that different clays were used to make the bodies and the slips. However, key element ratios are very close in associated black and pale slips. The grey slip may have been produced by elutriation of the fine, iron oxide‐rich clay that was used to prepare the black slip. The pale grey slip was laid over the black and removed by combing to produce a bichrome effect, which evoked semi‐precious materials such as agate. RSW was a specialist product that required significantly higher input skill and resources than the majority of Harappan clay‐based ceramics. It is a further example of the range of sophisticated Harappan ceramic wares, which included faience, fired steatite and stoneware.     

书斋雅物 名家笔筒鉴赏

中国古代文人雅士常将笔、墨、纸、砚誉为"文房四宝",备加珍爱,乃至视为中国传统文化的象征之一,影响深远。与此相应,应笔而生、专用于插笔的文房用具"笔筒"亦深受文人雅士的推崇与青睐。据文献记载,"笔筒"一词最早出现于三国,如陆玑《毛诗草木鸟兽虫鱼疏》"螟蛉有子"篇便有蜾蠃"取桑虫负之于木空中,或书简笔筒中,七日而化为其子",但此处"笔筒"的真正含义是"笔套",并非我们今天所指的笔筒。     

The risk of harm to archaeological artefacts in soil from dynamic subsurface pressures generated by agricultural operations: experimental studies

An investigation was made of the fracture risk to buried ceramic pots and bones from the subsurface pressures generated by agricultural operations. A method for generating subsurface pressures at 0.25 m depth in a soil bin was developed and used to explore fracture failure of modern replicates of ceramic pots corresponding to different archaeological periods and aged medieval human bone. Application of conductive traces to the objects’ surfaces allowed detection of fracturing in real‐time without excavation. Predictive models relating fracture of objects to subsurface pressure application were developed by relating the probability of fracture to observed survival statistics at increasing subsurface pressures. Subsurface pressures of above 100 kPa were sufficient to fracture the more fragile pots at a probability level of 90%. The lowest subsurface pressure causing bone fracture was 280 kPa; however, no relationship was observed between subsurface pressure and bone fracture, probably due to variation in bone material. The subsurface pressures generated and applied are within the range reported from field measurements during typical agricultural operations. They indicate that measures to control the generation of subsurface pressures would be necessary to mitigate risk of harm from agriculture to buried archaeology; for example, via low‐pressure tyres, tracks and appropriate tillage.     

Permeability changes in simulated granite faults during and after frictional sliding

Thermal–hydrological–mechanical coupling processes suggest that fault permeability should undergo dynamic change as a result of seismic slip. In igneous rocks, a fault's slip surface may have much higher permeability than the surrounding rock matrix and therefore operate as a conduit for fluids. We conducted laboratory experiments to investigate changes in fracture permeability (or transmissivity) of a fault in granite due to shear slip and cyclic heating and cooling. Our experiments showed that high initial fracture transmissivity (>10^?18 m³) was associated with a high friction coefficient and that transmissivity decreased during slip. We propose that this reduction in transmissivity reflects the presence of gouge in fracture voids, increasing the area of contact in the fault plane and reducing the hydraulic aperture. In contrast, when initial fracture transmissivity was low (<10^?18 m³), we observed that friction was lower and transmissivity increased during slip. The high transmissivity and high friction may be explained by large areas of bare rock being in contact on the slip surface. Slip velocity had little influence on the evolution of permeability, probably because gouge produced at different slip velocities had similar grain size distributions, or because gouge leaked from the slip surface. Transmissivity decreased with increasing temperature in heating tests, probably due to thermal expansion increasing normal stress on the fracture. Frictional heating did not influence transmissivity during the shearing tests.     

Diet of aurochs and early cattle in southern Scandinavia: evidence from 15N and 13C stable isotopes

Stable carbon and nitrogen isotope ratios from ¹⁴C dated bones of early Atlantic aurochs (Bos primigenius Bojanus) and late Atlantic first domestic cattle (Bos taurus Linnaeus) in eastern Denmark and southern Sweden are significantly different and provide information on the origin and feeding strategies of the two species.Radiocarbon dates generally divide the bone material of aurochs and domestic cattle in three groups: aurochs older than 4000 cal yr BP, an older group of domestic cattle around 4000 cal yr BP, and a younger, less well-defined group of domestic cattle starting at around 3500 cal yr BP. The older domestic cattle are represented mainly by fragmentary bones left over from meals, and deposited in lakes at the vicinity of the settlement areas. Bones of the younger domestic cattle group occur both as settlement debris and as single articulated skeletons in bogs, commonly in association with different types of clay pots. The latter type of finds suggests that sacrifice of domestic cattle began at this time. The dating of the early domestic cattle further indicates that they were contemporaneous with or slightly younger than the elm decline, which occurred shortly after 4000 cal yr BC on the Danish island of Sjælland. Our results indicate a sudden rapid introduction of domestic cattle into Denmark, heralding the introduction of agriculture and there is no evidence for leaf foddering or domestication of aurochs. A combination of several natural events may have created the necessary open land, providing the grazing areas for the imported cattle.     

双通道离子色谱法测定一件陶罐表面结晶盐以及脱盐溶液中的阴阳离子

陶器由于受环境的影响,表面容易出现结晶盐。在保护修复陶器的过程中,脱盐是重要的保护程序之一。本工作主要研究了双通道离子色谱法测定一件陶罐表面结晶盐以及脱盐溶液中的7种阴离子和5种阳离子时,淋洗液浓度、流速对测定结果的影响。实验表明:淋洗液浓度和流速会影响各离子的分离和峰形。当碳酸钠~碳酸氢钠浓度为2.5~1.7mmol/L、流速为0.6m L/min,吡啶二羧酸~硝酸浓度为0.8~1.6mmol/L、流速为0.7m L/min时,各离子峰形好,分离时间适中,分离效果很好。精密度和回收率实验表明,该分析方法的准确度满足定量分析的要求。由此可见,用双通道离子色谱法可以快速、简便、准确地测定结晶盐的离子种类和含量,可以实时监测脱盐溶液中的离子含量能较好地反映器物的脱盐程度。     

Conflicting Traditions,Concurrent Treatment: Medical Pluralism in Remote Aboriginal Australia

ABSTRACT In remote Aboriginal communities in Australia, researchers cast health beliefs and treatments as belonging to either an Aboriginal or biomedical system, which are considered to be irreconcilable and in conflict. Warlpiri people also speak of two distinct traditions that, they claim, are able to heal only specific classes of illness. Nevertheless, both Aboriginal and biomedical systems can be used simultaneously. An examination of two illness episodes will illustrate the complexity of how both Aboriginal and biomedical diagnoses and treatments are employed in a similar manner. I argue that while diagnosis is often stressed in statements regarding illness, it is only one of many factors that influence the treatment choices of individuals.     

Can palynomorphs occur in burnt ancient potsherds? An experimental proof

Potsherds from archaeological sites are usually found barren of palynomorphs. Recently half burnt potsherds from an excavation site dated to 3320 ± 400 years BP to 2080 ± 80 years BP in Gangetic West Bengal, India yielded some palynotaxa. That palynomorphs can remain preserved in half burnt potsherds was experimentally proved with pots made from mud mixed with known pollen grains and burning for variable duration. Pots burnt for shorter duration showed recovery, while prolonged firing showed poor/no recovery. Present study suggests the use of pollen grains from under-fired ancient potsherds as a reliable tool in deciphering vegetation, climate, agriculture and related parameters of archaeological research.