A proof of concept demonstration of the automated laser removal of rock from a fossil using 3D X-ray tomography data

Laser removal of rock from around a fossil using 3D data was demonstrated was the first time. This proof of concept combines the power of two technologies: X-ray micro-computed tomography scanning and programmable scanning laser ablation. This simple demonstration holds promise for the semi-automated and entirely safe laser removal of bulk material from around precious fossils.     

A new statistical approach for determining the crystallinity of heat-altered bone mineral from FTIR spectra

The crystallinity of bone mineral represents an established method of measuring heat-induced change and is of importance to fields including material science, clinical science, anthropology and archaeology. A commonly used technique involves the calculation of the Crystallinity Index (CI) using selected peaks from Fourier Transform Infrared (FTIR) absorbance spectra. However, the choice of peaks has to date not been statistically justified. In this study a novel application of statistical techniques to the FTIR spectra of bone samples burned in the range 100 °C–1100 °C has been used to identify 5 new spectral indices of heat-induced crystallinity change. The validity of the new indices was tested by using a statistical classification model (LDA) to predict the burning temperature of a set of 108 bone samples burned between 100 °C and 1100 °C. A correct classification rate (CCR) of 97.2% was obtained when a combination of 4 indices including the CI was used. This was significantly better than the CCR of 66.7% which was obtained when the CI was used on its own.     

Comparison of coordinate measurement precision of different landmark types on human crania using a 3D laser scanner and a 3D digitiser: Implications for applications of digital morphometrics

A total of 11 340 Cartesian coordinates of 42 homologous landmarks on five excavated human crania were recorded by three observers using a three‐dimensional (3D) digitiser and computer models created with a 3D laser scanner. The aim was to compare the errors of the coordinate data of landmarks of different types recorded with these two techniques. The results showed that digitiser‐based and 3D model‐based coordinate measurements had overall standard deviations of, respectively, ±0.79 and ±1.05 mm. However, the 3D digitiser yielded the most precise coordinate data for landmarks defined primarily by biological criteria (Type I landmarks), while the 3D laser scanner models yielded the most precise coordinate data for landmarks defined primarily by geometric criteria (Type III landmarks). These findings are likely to influence the research design of future craniometric studies, as they indicate that the suitability of certain landmark types as reference points for geometric operations, such as partial Procrustes analysis, depends on the method by which they are measured. This information is particularly important for retrospective research or for combined databases such as FORDISC or CRANID, which may integrate different types of landmarks recorded by different researchers and/or instruments. Crania displaying poor preservation and surface discoloration yielded larger measurement errors, especially for the 3D model measurements. This is not surprising given that landmarks on 3D models cannot be located using tactile means, but have to be located solely on a visual basis. Nonetheless, even though the digitiser measurements exhibit an overall precision slightly greater than the 3D model measurements, both techniques yield coordinate data with a precision sufficient for most craniometric research. Copyright © 2010 John Wiley & Sons, Ltd.     

3D reality-based artefact models for the management of archaeological sites using 3D Gis: a framework starting from the case study of the Pompeii Archaeological area

This work describes the procedures, the different techniques and the pipeline used for creating a digital framework that should assist the Superintendence of Pompeii in the digital reconstruction, classification, management and visualisation of archaeological finds inside an advanced 3D web-based repository of reality-based data. Specific topics have been focused on the quality assessment procedures adopted to ensure consistency and reliability of data throughout the whole 3D models acquisition and pipeline creation, as well as on the particular semantic reality-based structure adopted to develop an information system into a knowledge one. The main purposes of our framework have been the usage of 3D digital models as a restitution of the real object and as a metaphor for navigating through the data; 3D models were used as archaeological cognitive systems and developed as a collection of structured objects, identified through a precise terminology that allows to easily extend the concept of 2D GIS to 3D GIS. In addition, the system was developed as a scalable application that allows the use of the same database by different users, simply filtering the data according to the specific requirements, and can operate both as standalone and web-based application.     

Terrestrial laser scanning and close range photogrammetry for 3D archaeological documentation: the Upper Palaeolithic Cave of Parpalló as a case study

Graphic and metric archaeological documentation is an activity that requires the capture of information from different sources, accurate processing and comprehensive analysis. If monitoring of the state of conservation is required, this task has to be performed before intervention, during and after the completion of the works in a repetitive way.This paper presents the use of terrestrial laser scanning (TLS) in order to effectively produce, prior to intervention, accurate and high-resolution 3D models of a cave with engravings dating back to the Upper Palaeolithic era. The processing of the TLS data is discussed in detail in order to create digital surface models. The complexity of the cave required the integration of two techniques, TLS and close range photogrammetry to yield not only traditional drawings such as sections and elevations, but also photo-realistic perspective views and visual navigation worlds fully operational in 3D environments. This paper demonstrates the potential of integrating TLS and close range photogrammetry to provide both accurate digital surface models and photo-realistic outputs. This processed data can be used to systematically improve archaeological understanding of complex caves and relief panels of prehistoric art with tiny engravings.     

A new method for identifying sherd refits: A case study from the Neolithic of Northumbria,U.K.

Abstract

Here we present a flexible, quantitative methodology for refitting handmade ceramics. Rather than analyzing the physical joins between sherds, we assess the likelihood that non-adjoining sherds of similar appearance are from the same vessel. The customary disregard of non-adjoining sherds in refitting experiments prompts us to address this issue. Using the Neolithic ceramic assemblage from Thirlings (Northumberland, U.K.) as a case study, we test several scoring systems for assessing the probability of two sherds pertaining to the same vessel. The utility of this approach is supported by the comparison of a set of percentage scores statistically verified using Spearman’s rank correlation coefficient. We conclude with a discussion of the contribution of the new method to post-excavation ceramic analyses, and its applicability to other assemblages.     

A GIS method for assessing the zone of human-environmental impact around archaeological sites: a test case from the Late Neolithic of Wadi Ziqlâb,Jordan

Assessing the impact of prehistoric sites on their local environment is difficult to accomplish with standard archaeological methods. Simulation modeling offers a solution to this issue, but it is first necessary to delimit a site catchment, or “zone of impact”, around archaeological sites in which to carry out human–environment interaction modeling. To that end, I have developed a new method for GIS-based catchment reconstruction and distilled it into a custom module (r.catchment) for GRASS GIS, which calculates catchments of a given area based on anisotropic travel costs from a point of origin. One method of applying this new module in exploratory catchment modeling is discussed using the pastoral economy of the Late Neolithic period in Wadi Ziqlâb, Northern Jordan as a test case. A model of Late Neolithic herding economy and ecology is constructed, which combines data from archaeology, phytogeography, range science, agronomy, and ethnohistory. Four sizes of pastoral catchments are then derived using r.catchment, and the herd ecology model is used to estimate the stocking-rate (carrying capacity) of mixed goat and sheep herds for each catchment. The human populations these herd numbers could support (between 3 and 630 people in the Wadi) are then compared with human population estimates derived from household architectural analyses (between 18 and 54 people in the Wadi) to determine the most probable catchment configurations. The results indicate that the most probable zone of impact around the known Late Neolithic sites in Wadi Ziqlâb was somewhere between 9 and 20 square kilometers, delineated by 3 and 4.5 km pasture radii respectively.     

Detection of chloride from pottery as a marker for salt: A new analytical method validated using simulated salt-making pottery and applied to Japanese ceramics

Salt is an essential mineral in the human diet, and ancient peoples obtained salt either directly from rock salt, from salt lakes, or by concentrating saline waters from salt springs or seawater in pottery vessels. However, because sodium chloride, the major component of salt, is soluble in water, it has been thought unlikely that any trace of salt would remain in the pottery after a long period of time. A new methodology for retrieval of water-insoluble (retainable) chloride ion trapped within a pottery matrix is presented as a method for detecting previous use of the pottery for salt making. Simulated salt-making pottery was used to make salt by repeatedly boiling seawater over a fire. After chloride had been extracted with distilled water, to mimic the removal of chloride by natural waters such as rainwater and groundwater, an aqueous ammonium fluoride solution was shown to be capable of extracting chloride ions remaining in the pottery. A chloride-selective electrode was used to quantify the amount of extracted chloride in the presence of fluoride. This method was then successfully applied to excavated Japanese pottery vessels suspected of having been used for making salt. Identification of retainable chloride in pottery can offer insights into salt trading networks, which reflect the growth and affluence of an ancient society.     

Pottery firing temperatures: a new method for determining the firing temperature of ceramics and burnt clay

A new method for determining the maximum firing temperature of ceramics and burnt clay is presented. The technique relies on measuring the magnetic susceptibility on a step-wise re-fired sample. The validity of the method has been tested by determining firing temperatures of two sets of clay samples fired at temperatures ranging from 400 to 1000 °C. Aliquots of the same samples have been studied petrographically by optical microscopy on thin sections and analyzed by powder X-ray diffraction in order to monitor structural and mineralogical changes as a function of temperature. The method is demonstrated on samples from four geographically widely different sites and it is applied to a larger set of ceramics of Late (ca. AD 900–AD 1450) and Inca (ca. AD 1480–AD 1532) periods from the Northwestern Argentine region, dating to a limited period of time prior to the fall of the Inca Empire. The method is shown to be a powerful tool in revealing archaeological information about the change in firing technologies in the pre-Hispanic societies in the Andean area through time.     

The investiture of Emperor Charles VI in Brabant and Flanders: a test case for the authority of the new Austrian government

This article focuses upon the investitures of Emperor Charles VI in 1717 in Brabant and Flanders. The purpose of this analysis is to demonstrate that, contrary to what some historians have claimed, the element of direct communication between prince and subjects remained significant at least until the beginning of the eighteenth century. Despite Charles' assertive attitude, the ceremonies were preceded by a period of intense negotiation, in which the Estates made clear demands. Eventually, however, he acquiesced to some of their requests. These concessions can be placed within a long tradition of modus vivendi between princely centralism and local autonomy in the Southern Netherlands. The sovereign was financially dependent on the Estates, which therefore had a great deal of leverage at their disposal. This vulnerability was compounded by the fact that Charles stood at the head of a dynasty, the Austrian Habsburgs, which had no tradition of authority in these regions upon which to draw. Furthermore, the Barrier Treaty's provisions restricted his sovereignty. His bargaining position influenced the organisation of the investitures, thus illustrating that in the early eighteenth century, the sovereign and provincial Estates of the Southern Netherlands were still engaged in a contractual relationship.     

A cautionary note on the use of captive carnivores to model wild predator behavior: a comparison of bone modification patterns on long bones by captive and wild lions

A study with wild lions in Tarangire National Park (Tanzania) and with captive lions in Cabárceno Reserve (Spain) has yielded two different bone modification patterns, probably as a result of the differences in environmental contexts. Captive lions have modified bones more intensively, both in the form of total number of tooth-marked bones and number of tooth marks per tooth-marked bone, probably because of stereotypic behaviors. This emphasizes the importance of environmental contexts to understand carnivore behavior and their resulting bone modification patterns. It also shows that analogical models based on experiments carried out with captive carnivores may be biased and inadequate as proxies for wild carnivore bone modification behaviors.     

The utility of hand and foot bones for the determination of sex and the estimation of stature in a prehistoric population from west-central Illinois

This study focuses on hands and feet as indicators of sex and stature for Native Americans, hitherto relatively neglected in this regard. The study was performed on a large, well-preserved prehistoric skeletal sample from west-central Illinois. Discriminant functions are presented which determine sex with accuracies exceeding 87%. Those functions are then tested on three other Native American samples and found to have similar high degrees of accuracy. The utility of hand and foot bones for estimation of femur length (and subsequent inclusion in stature estimation equations) is also explored. While indirect estimation of stature is determined to be possible in this manner, it is suggested that these and other stature estimation techniques that have large standard errors may be of limited archaeological or forensic value. © 1998 John Wiley & Sons, Ltd.     

A crossbeam co-ordinate caliper for the morphometric analysis of lithic nuclei: a description,test and empirical examples of application

Over the last four decades, there has been surprisingly little advance in the quantitative morphometric analysis of Palaeolithic stone tools, especially compared to that which has taken place in biological morphometrics over a comparable time frame. In Palaeolithic archaeology's sister discipline of palaeoanthropology, detailed quantitative morphometric, geometric morphometric, and even 3D geometric morphometric analyses are now seen almost as routine. This period of relative methodological stasis may have been influenced by the lack of homologous landmarks on many lithic tools (essential for any comparative analysis), especially core-based technologies of the Lower Palaeolithic. Archaeological field conditions may also prohibit the use of expensive and delicate precision instruments in certain cases. Here we present a crossbeam co-ordinate caliper that – crucially – both geometrically locates and measures distances between morphologically homologous landmarks upon lithic nuclei via a single protocol. Intra- and inter-observer error tests provide evidence that error levels associated with the instrument fall within acceptable ranges. In addition, we present empirical examples of application in the form of a multivariate analysis of 55 discrete morphometric variables, and a 3D geometric morphometric analysis of co-ordinate landmark configurations derived from Pleistocene lithic nuclei (i.e. ‘cores’ sensu lato). We also introduce to lithic studies some techniques for the study of shape variation that have previously been used with success in biological morphometric analyses. We conclude that use of an instrument such as the crossbeam co-ordinate caliper may provide a useful adjunct to traditional techniques of lithic analysis, particularly in developing a quantitative morphometric approach.     

A taphonomic study of a carcass consumed by griffon vultures (<Emphasis Type="Italic">Gyps fulvus</Emphasis>) and its relevance for the interpretation of bone surface modifications

Vultures are ubiquitous taphonomic agents in most biomes. However, taphonomic studies of vultures are scarce and very little is known of the damage they cause to bone surfaces when consuming carcasses. This study presents the results of a taphonomic analysis of bones modified by griffon vultures. Although some marks created by these agents are diagnostically unique, others are extremely similar to modifications caused by other biostratinomic processes. This renders interpretations of marks on bones very problematic when these modifications are considered in isolation rather than at the assemblage and contextual levels.