Geochemistry of the Bagnères-de-Bigorre thermal waters from the North Pyrenean Zone (France)

Thermal springs are poorly known in the sedimentary sites of the Pyrenees. In this paper, we describe the ‘Bagnères‐de‐Bigorre’ springs which occur in a remarkably active seismotectonic context. A chemical and isotopic study of 15 spring waters (both cold and thermal, ranging in temperature from 7.0 to 49.9°C), and continuous monitoring of a single spring allow us to characterise water–rock interactions, fluids paths and mixing processes. Three groups of waters are distinguished: (I) SO₄²⁺–Ca²⁺–Cl^– thermal waters (II) SO₄²⁺–Cl^––Ca²⁺ thermal waters and (III) HCO₃^––Ca²⁺ cold shallow waters. Their characteristics suggest interactions with Mesozoic evaporite and carbonate formations. O and D isotopes from thermal waters indicate a local meteoric origin of Atlantic signature and a recharge elevation of 800 to 1000 m, which corresponds to a single feeding area. Their δ¹³C values (?2.8 to ?9.6‰) are consistent with carbonate dissolution, slight fractionation and a surficial organic input leading to δ¹³C depletion. Sr isotopes (0.70751 to 0.70777), Na⁺/Cl^– and (Ca²⁺ + Mg²⁺)/SO₄^2– ratios as well as thermodynamic calculations show that the dissolution of anhydrite and halite‐bearing Triassic layers control the chemical composition of group‐I and ‐II waters. The contrasting trends of cation/Cl^– ratios and TDS of waters from groups I and II suggest the existence of two different circulation paths at depth as well as dilution with surficial waters similar to group III. Calculated mixing proportions show that three waters from group I are diluted from 17 to 66%, whereas all waters from group II are mixed. The aquifer temperature is estimated to be in the range 55–64°C using the retrograde and prograde solubilities of anhydrite and chalcedony, respectively. Accordingly, the mean depth of the reservoir is around 1.7 km, which allows us to constrain the depth of the Triassic layer.     

What do aqueous geothermometers really tell us?

The application of chemical geothermometry to shallow groundwaters or spring discharge assumes that there is minimal mixing or re-equilibration of water as it travels from depth to the surface. In this study, we examine the potential for mixing and re-equilibration by examining heat and fluid flow along crustal-scale faults in tectonic geothermal systems. Numerical modeling results indicate that maximum in situ temperatures could be under-predicted by up to 30% due to mixing of fluids that enter the fault at different depths. This, coupled with the depression of isotherms by downward groundwater flow in the hanging wall, could cause underestimates of maximum circulation depth of greater than 80% in extreme cases. Kinetics does not favor re-equilibration in the shallower portions of faults due to low temperatures and higher fluid velocities. However, in areas of deeper circulation or higher heat flow such reactions are possible.     

Hydrogeology of the Krafla geothermal system,northeast Iceland

The Krafla geothermal system is located in Iceland's northeastern neovolcanic zone, within the Krafla central volcanic complex. Geothermal fluids are superheated steam closest to the magma heat source, two‐phase at higher depths, and sub‐boiling at the shallowest depths. Hydrogen isotope ratios of geothermal fluids range from ?87‰, equivalent to local meteoric water, to ?94‰. These fluids are enriched in ¹⁸O relative to the global meteoric line by +0.5–3.2‰. Calculated vapor fractions of the fluids are 0.0–0.5 wt% (~0–16% by volume) in the northwestern portion of the geothermal system and increase towards the southeast, up to 5.4 wt% (~57% by volume). Hydrothermal epidote sampled from 900 to 2500 m depth has δD values from ?127 to ?108‰, and δ¹⁸O from ?13.0 to ?9.6‰. Fluids in equilibrium with epidote have isotope compositions similar to those calculated for the vapor phase of two‐phase aquifer fluids. We interpret the large range in δD_EPIDOTE and δ¹⁸O_EPIDOTE across the system and within individual wells (up to 7‰ and 3.3‰, respectively) to result from variable mixing of shallow sub‐boiling groundwater with condensates of vapor rising from a deeper two‐phase reservoir. The data suggest that meteoric waters derived from a single source in the northwest are separated into the shallow sub‐boiling reservoir, and deeper two‐phase reservoir. Interaction between these reservoirs occurs by channelized vertical flow of vapor along fractures, and input of magmatic volatiles further alters fluid chemistry in some wells. Isotopic compositions of hydrothermal epidote reflect local equilibrium with fluids formed by mixtures of shallow water, deep vapor condensates, and magmatic volatiles, whose ionic strength is subsequently derived from dissolution of basalt host rock. This study illustrates the benefits of combining phase segregation effects in two‐phase systems during analysis of wellhead fluid data with stable isotope values of hydrous alteration minerals when evaluating the complex hydrogeology of volcano‐hosted geothermal systems.     

Thermal waters of ‘tectonic origin’: the alkaline,Na‐HCO3 waters of the Rio Valdez geothermal area (Isla Grande de Tierra del Fuego,Argentina)

The geothermal area of Rio Valdez is located in the central portion of the Isla Grande de Tierra del Fuego (South Argentina), ten kilometers south of the southeastern sector of the Fagnano Lake. It consists of a series of thermal springs with low discharge rates (≤1 L/s) and temperatures in the range of 20–33°C distributed in an area of <1 km². The thermal springs are characterized by alkaline, Na‐HCO₃ waters with low salinity (0.53÷0.58 g/L), but relatively high fluoride contents (up to 19.4 mg/L). Their composition is the result of a slow circulation at depth, possibly through deep tectonic discontinuities connected with the Magallanes‐Fagnano Fault (MFF) system. According to geothermometric calculations, thermal waters reach temperatures in the range of 100–150°C and an almost complete chemical equilibrium with the alkali‐feldspars in the metavolcanic country rocks. The relatively high fluorine contents can be explained by the slow ascent and cooling of deep groundwaters followed by a progressive re‐equilibration with F‐bearing, hydrated Mg‐silicates, such as chlorite, which has been recognized as an abundant mineral in the metavolcanics of the Lemaire Formation and metapelites and metagraywackes of the Yahgán Formation. Finally, the isotopic composition of the investigated samples is consistent with the infiltration from local snow melting at altitudes in the range of 610–770 m asl. The comparison of our data with those collected in 1991 seems to suggest a possible progressive decline of the bulk thermal output in the near future. This possibility should be seriously considered before planning a potentially onerous exploitation of the resource. Presently, the only ways to exploit this geothermal resource by the population scattered in the area are the direct use of thermal waters and/or spa structures.     

Chemical and isotopic signatures of Na/HCO3/CO2‐rich geofluids,North Portugal

Geochemical and isotopic studies have been undertaken to assess the origin of CO₂‐rich waters issuing in the northern part of Portugal. These solutions are hot (76°C) to cold (17°C) Na–HCO₃ mineral waters. The δ²H and δ¹⁸O signatures of the mineral waters reflect the influence of altitude on meteoric recharge. The lack of an ¹⁸O‐shift indicates there has been no high temperature water–rock interaction at depth, corroborating the results of several chemical geothermometers (reservoir temperature of about 120°C). The low ¹⁴C activity (up to 9.9 pmC) measured in some of the cold CO₂‐rich mineral waters (total dissolved inorganic carbon) is incompatible with the presence of ³H (from 1.7 to 4.1 TU) in those waters, which indicates relatively short subsurface circulation times. The δ¹³C values of CO₂ gas and dissolved inorganic carbon range between ?6‰ and ?1‰ versus Vienna‐Peedee Belemnite, indicating that the total carbon in the recharge waters is being diluted by larger quantities of CO₂ (¹⁴C‐free) introduced from deep‐seated (upper mantle) sources, masking the ¹⁴C‐dating values. The differences in the ⁸⁷Sr/⁸⁶Sr ratios of the studied thermal and mineral waters seem to be caused by water–rock interaction with different granitic rocks. Chlorine isotope signatures (?0.4‰ < δ³⁷Cl < +0.4‰ versus standard mean ocean chloride) indicate that Cl in these waters could be derived from mixing of a small amount of igneous Cl from leaching of granitic rocks.     

Impacts of Pleistocene glaciation on large‐scale groundwater flow and salinity in the Michigan Basin

Pleistocene melting of kilometer‐thick continental ice sheets significantly impacted regional‐scale groundwater flow in the low‐lying stable interiors of the North American and Eurasian cratons. Glacial meltwaters penetrated hundreds of meters into the underlying sedimentary basins and fractured crystalline bedrock, disrupting relatively stagnant saline fluids and creating a strong disequilibrium pattern in fluid salinity. To constrain the impact of continental glaciation on variable density fluid flow, heat and solute transport in the Michigan Basin, we constructed a transient two‐dimensional finite‐element model of the northern half of the basin and imposed modern versus Pleistocene recharge conditions. The sag‐type basin contains up to approximately 5 km of Paleozoic strata (carbonates, siliciclastics, and bedded evaporites) overlain by a thick veneer (up to 300 m) of glacial deposits. Formation water salinity increases exponentially from <0.5 g l^?1 total dissolved solids (TDS) near the surface to >350 g l^?1 TDS at over 800 m depth. Model simulations show that modern groundwater flow is primarily restricted to shallow glacial drift aquifers with discharge to the Great Lakes. During the Pleistocene, however, high hydraulic heads from melting of the Laurentide Ice Sheet reversed regional flow patterns and focused recharge into Paleozoic carbonate and siliciclastic aquifers. Dilute waters (<20 g l^?1 TDS) migrated approximately 110 km laterally into the Devonian carbonate aquifers, significantly depressing the freshwater‐saline water mixing zones. These results are consistent with ¹⁴C ages and oxygen isotope values of confined groundwaters in Devonian carbonates along the basin margin, which reflect past recharge beneath the Laurentide Ice Sheet (14–50 ka). Constraining the paleohydrology of glaciated sedimentary basins, such as the Michigan Basin, is important for determining the source and residence times of groundwater resources, in addition to resolving geologic forces responsible for basinal‐scale fluid and solute migration.     

Geochemical fingerprinting of hydraulic fracturing fluids from Qusaiba Hot Shale and formation water from Paleozoic petroleum systems,Saudi Arabia

Provenance studies of produced water are essential to trace flow dynamics and reservoir compartmentalization in petroleum systems and to quantify fluid recovery rates from unconventional fracturing. Produced water from a hydraulically fractured well in the Qusaiba Hot Shale in the Northern Exploration Area, Saudi Arabia, was daily monitored and analyzed for water chemistry, and environmental (δ²H, δ¹³C, δ¹⁸O_H2O, δ¹⁸O_SO4, δ³⁴S_SO4, δ³⁷Cl, ⁸⁷Sr/⁸⁶Sr) and cosmogenic isotopes (³H, ¹⁴C, ³⁶Cl), to differentiate from reference fluids of supply water, fracturing fluids, and formation water from adjacent Paleozoic units. Initially, recovered water is composed of fracturing fluids and subsequently replaced by a homogeneous cut of pristine formation water. Formation water is composed of dominant meteoric water (approximately 84 vol%) and minor fossil evaporated seawater. The young ¹⁴C‐apparent age between 6000 and 6700 years BP and depleted δ¹⁸O/δ²H values for the meteoric component confirm the infiltration of surface water into the Qusaiba Hot Shale interval or adjacent units during the Early Holocene Pluvial Period under cooler and wetter climatic conditions than present, which suggest the presence of a very recent, dynamic hydraulic flow system. ³⁶Cl/Cl ratios between 102 × 10^?15 and 31 × 10^?15 are ambiguous and can be attributed to atmospheric recharge close to the coast, mixing of ³⁶Cl‐enriched Quaternary meteoric recharge with ³⁶Cl‐depleted fossil seawater, and/or hypogene production by U‐Th‐enriched host rock. Produced waters from Qusaiba Hot Shale are within the compositional range of Na‐Cl‐type formation water from Paleozoic reservoir units in northern Saudi Arabia with salinities from 30 000 to 130 000 mg l^?1. As a novel technological approach for exploration wells in Northern Saudi Arabia, multi‐isotopic methods were successfully implemented to quantify flowback volumes from hydraulic fracturing, and to fingerprint pristine formation water or pore water in Paleozoic systems on their provenance, residence time, migration pathways, and secondary alteration processes.     

Fluid circulation related to post‐Messinian extension,Thassos Island,North Aegean

In the North Aegean Domain, Thassos Island contains a Plio‐Pleistocene basin controlled by a large‐scale flat‐ramp extensional system with a potential décollement located at depth within a marble unit. Numerous mineralizations associated with normal faults of Plio‐Pleistocene age are the sign of fluid circulation during extension. Two main generations of fluid flow are recognized, related to Plio‐Pleistocene extension. A first circulation under high‐temperature conditions (about 100–200°C) resulted in dolomitization of marbles near the base of the Plio‐Pleistocene basin. The dolomites are characterized by low δ¹⁸O values (down to 11‰ versus Standard Mean Ocean Water). Some cataclastic deformation affected the dolomites. Hydrothermal quartz that crystallized in extension veins above a blind ramp also has low δ¹⁸O values (about 13‰). This shows that high‐temperature fluids moved up from the décollement level toward the surface. A second downward circulation of continental waters at near‐surface temperature is documented by calcite veins in fault zones and at the base of the Plio‐Pleistocene basin. These veins have O isotope values relatively constant at about 23–25‰ and C isotope values intermediate between the high δ¹³C value of the carbonate host rock (about 1–3‰ versus Peedee Belemnite) and the low δ¹³C value of soil‐derived carbon (?10‰). The calcites associated with the oxidative remobilization of primary sulphide Zn–Pb mineralization of Thassos carbonates have comparable O and C isotope compositions. Hot fluids, within the 100–200°C temperature range, have likely contributed to the weakening of the lower marble unit of Thassos and, thus, to the process of décollement.     

Long‐term chemical evolution and modification of continental basement brines – a field study from the Schwarzwald,SW Germany

Highly saline, deep‐seated basement brines are of major importance for ore‐forming processes, but their genesis is controversial. Based on studies of fluid inclusions from hydrothermal veins of various ages, we reconstruct the temporal evolution of continental basement fluids from the Variscan Schwarzwald (Germany). During the Carboniferous (vein type i), quartz–tourmaline veins precipitated from low‐salinity (<4.5wt% NaCl + CaCl₂), high‐temperature (≤390°C) H₂O‐NaCl‐(CO₂‐CH₄) fluids with Cl/Br mass ratios = 50–146. In the Permian (vein type ii), cooling of H₂O‐NaCl‐(KCl‐CaCl₂) metamorphic fluids (T ≤ 310°C, 2–4.5wt% NaCl + CaCl₂, Cl/Br mass ratios = 90) leads to the precipitation of quartz‐Sb‐Au veins. Around the Triassic–Jurassic boundary (vein type iii), quartz–haematite veins formed from two distinct fluids: a low‐salinity fluid (similar to (ii)) and a high‐salinity fluid (T = 100–320°C, >20wt% NaCl + CaCl₂, Cl/Br mass ratios = 60–110). Both fluids types were present during vein formation but did not mix with each other (because of hydrogeological reasons). Jurassic–Cretaceous veins (vein type iv) record fluid mixing between an older bittern brine (Cl/Br mass ratios ~80) and a younger halite dissolution brine (Cl/Br mass ratios >1000) of similar salinity, resulting in a mixed H₂O‐NaCl‐CaCl₂ brine (50–140°C, 23–26wt% NaCl + CaCl₂, Cl/Br mass ratios = 80–520). During post‐Cretaceous times (vein type v), the opening of the Upper Rhine Graben and the concomitant juxtaposition of various aquifers, which enabled mixing of high‐ and low‐salinity fluids and resulted in vein formation (multicomponent fluid H₂O‐NaCl‐CaCl₂‐(SO₄‐HCO₃), 70–190°C, 5–25wt% NaCl‐CaCl₂ and Cl/Br mass ratios = 2–140). The first occurrence of highly saline brines is recorded in veins that formed shortly after deposition of halite in the Muschelkalk Ocean above the basement, suggesting an external source of the brine's salinity. Hence, today's brines in the European basement probably developed from inherited evaporitic bittern brines. These were afterwards extensively modified by fluid–rock interaction on their migration paths through the crystalline basement and later by mixing with younger meteoric fluids and halite dissolution brines.     

A comprehensive review of hydrocarbons and genetic model of the sandstone‐hosted Dongsheng uranium deposit,Ordos Basin,China

The Dongsheng uranium deposit, the largest in situ leach uranium mine in the Ordos Basin, geometrically forms a roll‐front type deposit that is hosted in the Middle Jurassic Zhiluo Formation. The genesis of the mineralization, however, has long been a topic of great debate. Regional faults, epigenetic alterations in surface outcrops, natural oil seeps, and experimental findings support a reducing microenvironment during ore genesis. The bulk of the mineralization is coffinite. Based on thin‐section petrography, some of the coffinite is intimately intergrown with authigenic pyrite (ore‐stage pyrite) and is commonly juxtaposed with some late diagenetic sparry calcite (ore‐stage calcite) in primary pores, suggesting simultaneous precipitation. Measured homogenization temperatures of greater than 100°C from fluid inclusions indicate circulation of low‐temperature hydrothermal fluids in the ore zone. The carbon isotopic compositions of late calcite cement (δ¹³C_VPDB = ?31.0 to ?1.4‰) suggest that they were partly derived from sedimentary organic carbon, possibly from deep‐seated petroleum fluids emanating from nearby faults. Hydrogen and oxygen isotope data from kaolinite cement (δD = ?133 to ?116‰ and δ¹⁸O_SMOW = 12.6–13.8‰) indicate that the mineralizing fluids differed from magmatic and metamorphic fluids and were more depleted in D (²H) than modern regional meteoric waters. Such a strongly negative hydrogen isotopic signature suggests that there has been selective modification of δD by CH₄±H₂S±H₂ fluids. Ore‐stage pyrite lies within a very wide range of δ³⁴S (?39.2 to 26.9‰), suggesting that the pyrite has a complex origin and that bacterially mediated sulfate reduction cannot be precluded. Hydrocarbon migration and its role in uranium reduction and precipitation have here been unequivocally defined. Thus, a unifying model for uranium mineralization can be established: Early coupled bacterial uranium mineralization and hydrocarbon oxidation were followed by later recrystallization of ore phases in association with low‐temperature hydrothermal solutions under hydrocarbon‐induced reducing conditions.     

The vertical distribution of CH4, N2O,CFC-12 and CFC-11 in the middle atmosphere at mid-latitudes

CH₄, N₂O, CFC-12 and CFC-11 data analysed from samples collected by means of cryogenic samplers from five balloon flights conducted during the 1982–1984 period, are presented. The vertical distributions of these gases show structures with dominant scale size of 16 ±2.5 km. The amplitude of the perturbation is larger for the species having steeper gradient. A comparison of the present results with the results of earlier measurements representing the period of 1977–1979 do not show any appreciable change in the mixing ratios of CH₄ and N₂O. However, an average tropospheric increase of (6.5±1)% per year is found for CFC-12 and CFC-11. This annual change in the mixing ratios of CFC-12 and CFC-11 is found to increase with height suggesting a time lag of about 6 years between the troposphere and the altitude region around 25 km. The average mixing ratios of CH₄ and N₂O are compared with the available satellite/spacelab data. This data set shows a satisfactory agreement with the present in situ measurements for the height region above 30 km.     

Application of boron isotopes to the understanding of fluid–rock interactions in a hydrothermally stimulated oil reservoir in the Alberta Basin, Canada

Boron isotope ratios of reservoir minerals and fluids can be a useful geothermometer and monitor of fluid–rock interactions. In Cold Lake oil sands of northern Alberta, there is a large variation in δ¹¹B of the produced waters generated during steam injection and recovery of oil and water. The higher temperature waters (～ 200 °C) have isotopically light δ¹¹B values (+ 3‰ to + 14‰) and high B contents (～150 p.p.m.). It is inferred that the range of δ¹¹B values of the hydrothermal fluids results from reaction with the reservoir rock, and is a function of the temperature of the fluid–rock interaction. The distinct B geochemistry of the produced waters can be used to show that there is no detectable mixing of the oil recovery waters with the regional formation waters or shallow groundwater aquifers containing potable water. Examination of B isotope ratios of reservoir minerals, before and after steam injection, allows the evaluation of sources of B in the reservoir. The only significant phase containing B is pumice. It shows generally positive δ¹¹B values before steam injection and negative values after steam, with δ¹¹B as low as ? 28‰. Other possibly reactive phases include clay minerals and organic matter, but their abundance is not great enough to impact on the isotopic composition of the produced waters. This information makes it possible to evaluate the boron isotope fractionation equation derived from experimental data ( Williams LB (2000) Boron isotope geochemistry during burial diagenesis. PhD Dissertation. The University of Calgary, Alberta, Canada; Williams LB, Hervig RL, Holloway JR, Hutcheon I (2001a) Boron isotope geochemistry during diagenesis: Part 1. Experimental determination of fractionation during illitization of smectite. Geochimica et Cosmochimica Acta, in press). The results show that the fractionation curve predicts the difference between δ¹¹B of the pumice and hydrothermal fluids in the Cold Lake reservoir. This not only indicates that the reservoir fluids have approached boron isotope equilibrium with the reservoir rock, but also shows that B isotopes provide a useful geothermometer for hydrothermally stimulated oil reservoirs.     

Syntectonic infiltration by meteoric waters along the Sevier thrust front,southwest Montana

Structural, petrographic, and isotopic data for calcite veins and carbonate host‐rocks from the Sevier thrust front of SW Montana record syntectonic infiltration by H₂O‐rich fluids with meteoric oxygen isotope compositions. Multiple generations of calcite veins record protracted fluid flow associated with regional Cretaceous contraction and subsequent Eocene extension. Vein mineralization occurred during single and multiple mineralization events, at times under elevated fluid pressures. Low salinity (T_m = ?0.6°C to +3.6°C, as NaCl equivalent salinities) and low temperature (estimated 50–80°C for Cretaceous veins, 60–80°C for Eocene veins) fluids interacted with wall‐rock carbonates at shallow depths (3–4 km in the Cretaceous, 2–3 km in the Eocene) during deformation. Shear and extensional veins of all ages show significant intra‐ and inter‐vein variation in δ¹⁸O and δ¹³C. Carbonate host‐rocks have a mean δ¹⁸O_V‐SMOW value of +22.2 ± 3‰ (1σ), and both the Cretaceous veins and Eocene veins have δ¹⁸O ranging from values similar to those of the host‐rocks to as low as +5 to +6‰. The variation in vein δ¹³C_V‐PDB of ?1 to approximately +6‰ is attributed to original stratigraphic variation and C isotope exchange with hydrocarbons. Using the estimated temperature ranges for vein formation, fluid (as H₂O) δ¹⁸O calculated from Cretaceous vein compositions for the Tendoy and Four Eyes Canyon thrust sheets are ?18.5 to ?12.5‰. For the Eocene veins within the Four Eyes Canyon thrust sheet, calculated H₂O δ¹⁸O values are ?16.3 to ?13.5‰. Fluid–rock exchange was localized along fractures and was likely coincident with hydrocarbon migration. Paleotemperature determinations and stable isotope data for veins are consistent with the infiltration of the foreland thrust sheets by meteoric waters, throughout both Sevier orogenesis and subsequent orogenic collapse. The cessation of the Sevier orogeny was coincident with an evolving paleogeographic landscape associated with the retreat of the Western Interior Seaway and the emergence of the thrust front and foreland basin. Meteoric waters penetrated the foreland carbonate thrust sheets of the Sevier orogeny utilizing an evolving mesoscopic fracture network, which was kinematically related to regional thrust structures. The uncertainty in the temperature estimates for the Cretaceous and Eocene vein formation prevents a more detailed assessment of the temporal evolution in meteoric water δ¹⁸O related to changing paleogeography. Meteoric water‐influenced δ¹⁸O values calculated here for Cretaceous to Eocene vein‐forming fluids are similar to those previously proposed for surface waters in the Eocene, and those observed for modern‐day precipitation, in this part of the Idaho‐Montana thrust belt.     

Numerical modeling of the origin of calcite mineralization in the Refugio‐Carneros fault,Santa Barbara Basin,California

Many faults in active and exhumed hydrocarbon‐generating basins are characterized by thick deposits of carbonate fault cement of limited vertical and horizontal extent. Based on fluid inclusion and stable isotope characteristics, these deposits have been attributed to upward flow of formation water and hydrocarbons. The present study sought to test this hypothesis by using numerical reactive transport modeling to investigate the origin of calcite cements in the Refugio‐Carneros fault located on the northern flank of the Santa Barbara Basin of southern California. Previous research has shown this calcite to have low δ¹³C values of about ?40 to ?30‰PDB, suggesting that methane‐rich fluids ascended the fault and contributed carbon for the mineralization. Fluid inclusion homogenization temperatures of 80–125°C in the calcite indicate that the fluids also transported significant quantities of heat. Fluid inclusion salinities ranging from fresh water to seawater values and the proximity of the Refugio‐Carneros fault to a zone of groundwater recharge in the Santa Ynez Mountains suggest that calcite precipitation in the fault may have been induced by the oxidation of methane‐rich basinal fluids by infiltrating meteoric fluids descending steeply dipping sedimentary layers on the northern basin flank. This oxidation could have occurred via at least two different mixing scenarios. In the first, overpressures in the central part of the basin may have driven methane‐rich formation waters derived from the Monterey Formation northward toward the basin flanks where they mixed with meteoric water descending from the Santa Ynez Mountains and diverted upward through the Refugio‐Carneros fault. In the second scenario, methane‐rich fluids sourced from deeper Paleogene sediments would have been driven upward by overpressures generated in the fault zones because of deformation, pressure solution, and flow, and released during fault rupture, ultimately mixing with meteoric water at shallow depth. The models in the present study were designed to test this second scenario, and show that in order for the observed fluid inclusion temperatures to be reached within 200 m of the surface, moderate overpressures and high permeabilities were required in the fault zone. Sudden release of overpressure may have been triggered by earthquakes and led to transient pulses of accelerated fluid flow and heat transport along faults, most likely on the order of tens to hundreds of years in duration. While the models also showed that methane‐rich fluids ascending the Refugio‐Carneros fault could be oxidized by meteoric water traversing the Vaqueros Sandstone to form calcite, they raised doubts about whether the length of time and the number of fault pulses needed for mineralization by the fault overpressuring mechanism were too high given existing geologic constraints.     

Strontium isotopic characterization of the Palmottu hydrosystem (Finland): water–rock interaction and geochemistry of groundwaters

The Palmottu hydrosystem is located in a granitic host rock in southern Finland. Along well‐defined pathways in the fractured crystalline rock, strontium isotopes are used to trace the degree of water–rock interaction (WRI) and mixing processes in groundwaters. The ⁸⁷Sr/⁸⁶Sr ratios range between 0.716910 and 0.735606 in the surface waters and between 0.719991 and 0.750787 in the groundwaters, but are between 0.720 and 0.735 in most of the samples. Moreover, the results show a lack of correlation between the water chemistries determining the classification into different water‐types (Na–Cl, Na–SO₄, etc.) and the results of the strontium (Sr) contents and Sr isotopic ratios. From a WRI standpoint, this implies that the Sr behaviour is independent of the water chemistry; the occurrence of large ⁸⁷Sr/⁸⁶Sr variations is site specific and mainly dependent on the lithology. A model to determine the ⁸⁷Sr/⁸⁶Sr ratio of water after interaction with granite was developed. This model is based on the assumption that Sr was derived from three minerals: plagioclase, K‐feldspar and biotite. The results of the calculation indicate that around half of the water analysed within the Palmottu hydrosystem can be explained by the weathering of the granites. However, clearly lower ⁸⁷Sr/⁸⁶Sr are observed in waters when compared to the calculated ⁸⁷Sr/⁸⁶Sr and other sources of Sr, with low ⁸⁷Sr/⁸⁶Sr, rather than the calculated granite–water interaction, which may be suspected. When comparing the ⁸⁷Sr/⁸⁶Sr and ion ratios (Ca/Na, Mg/Na, Sr/Na, Cl/Na), the scattering of the data can be explained by the presence of four end‐members: a brine component (low ⁸⁷Sr/⁸⁶Sr and Ca/Na ratios…), a deep granitic component (high ⁸⁷Sr/⁸⁶Sr ratios and low Ca/Na ratios…), a subsurface component (intermediate ⁸⁷Sr/⁸⁶Sr ratios associated with high Ca/Na ratios…) and a surface end‐member:snow and river drainage (low ⁸⁷Sr/⁸⁶Sr and low Ca/Na ratios…). These extreme end‐members define a series of WRI‐mixing line within a rather complex hydrosystem.     

Fluid inclusion and stable isotope constraints on the genesis of the Jian copper deposit,Sanandaj–Sirjan metamorphic zone,Iran

The Jian copper deposit, located on the eastern edge of the Sanandaj–Sirjan metamorphic zone, southwest of Iran, is contained within the Surian Permo‐Triassic volcano‐sedimentary complex. Retrograde metamorphism resulted in three stages of mineralization (quartz ± sulfide veins) during exhumation of the Surian metamorphic complex (Middle Jurassic time; 159–167 Ma), and after the peak of the metamorphism (Middle to Late Triassic time; approximately 187 Ma). The early stage of mineralization (stage 1) is related to a homogeneous H₂O–CO₂ (XCO₂ > 0.1) fluid characterized by moderate salinity (<10 wt.% NaCl equivalent) at high temperature and pressure (>370°C, >3 kbar). Early quartz was followed by small amounts of disseminated fine‐grained pyrite and chalcopyrite. Most of the main‐ore‐stage (stage 2) minerals, including chalcopyrite, pyrite and minor sphalerite, pyrrhotite, and galena, precipitated from an aqueous‐carbonic fluid (8–18 wt.% NaCl equivalent) at temperatures ranging between 241 and 388°C during fluid unmixing process (CO₂ effervescence). Fluid unmixing in the primary carbonaceous fluid at pressures of 1.5–3 kbar produced a high XCO₂ (>0.05) and a low XCO₂ (<0.01) aqueous fluid in ore‐bearing quartz veins. Oxygen and hydrogen isotope compositions suggest mineralization by fluids derived from metamorphic dehydration (δ¹⁸O_fluid = +7.6 to +10.7‰ and δD = ?33.1 to ?38.5‰) during stage 2. The late stage (stage 3) is related to a distinct low salinity (1.5–8 wt.% NaCl equivalent) and temperatures of (120–230°C) aqueous fluid at pressures below 1.5 kbar and the deposition of post‐ore barren quartz veins. These fluids probably derived from meteoric waters, which circulated through the metamorphic pile at sufficiently high temperatures and acquire the characteristics of metamorphic fluids (δ¹⁸O_fluid = +4.7 to +5.1‰ and δD = ?52.3 to ?53.9‰) during waning stages of the postearly Cimmerian orogeny in Surian complex. The sulfide‐bearing quartz veins are interpreted as a small‐scale example of redistribution of mineral deposits by metamorphic fluids. This study suggests that mineralization at the Jian deposit is metamorphogenic in style, probably related to a deep‐seated mesothermal system.     

REVIEWS/COMPTES RENDUS

Book reviewed in this article: Ground Truth: The Social Implications of Geographic Information Systems, edited by John, Pickles / STEPHEN DIDUNYK L'eau de neige: le tiède et le frais, by Xavier de Planhol /j.h. galloway Hydrogeology and Engineering Geology, par A.M. Galperin, V.S. Zaytsev et Y.A. Norvatov; Biogéographie des milieux aquatiques, par Gabriel Rougerie / jean-marie M. dubois Visualization in Modern Cartography, edited by Alan MacEachren and D.R. Fraser Taylor/BARRY BRADLEY Development, Geography, and Economic Theory, by Paul Krugman / trevor barnes Ground Truth: The Social Implications of Geographic Information Systems edited by john pickles L'eau de neige:le tiéde et le frais by xavier de planhol, Editions Fayard Par A.M. Galperin, V.S. Zaytsev et Y.A. Norvatov Balkema Biogéographie des milieux aquatiques par Gabriel rougerie, Armand Colin Visualization in Modern Cartography edited by alan maceachren and d.r. fraser taylor Cartographer to the New Zealand Historical Atlas Project Development, Geography, and Economic Theory by paul krugman The Canadian Geographer On Line /Le Géographe canadien « en ligne » The Canadian Geographer home page is shown below:/La page d'accueil du Géographe Canadien apparaît ci-dessous: THE CANADIAN GEOGRAPHER LE GÉOGRAPHE CANADIEN Journal of the Canadian Association of Geographers Revue de l'Association canadienne des géographes Editors / Rédacteurs: Barry Boots and/et Houston Saunderson Department of Geography, Wilfrid Laurier University, Waterloo, Ontario, Canada N2L 3C5 Choose one of the following hyperlinks (highlighted) / Choisissez l'un des hyperliens qui suivent: 1. Abstracts of articles recently published / Résumé's de publications récentes 2. Abstracts of current issue [41 (1), 19971 / Résumés de publications courantes [41 (1), 1997] 3. Abstracts of next issue / Résumés de publications prochaines 4. Abstracts of articles forthcoming/ Résumés d'articles à paraître 5. Editorial Advisory Board / Le comité de rédaction 6. List of officers 1996–1997 / Liste des administrateurs 1996–1997     

Hydrogeochemical dynamics affecting steam‐heated pools at El Chichón Crater (Chiapas – Mexico)

El Chichón is an active volcano located in the north‐western Chiapas, southern Mexico. The crater hosts a lake, a spring, named Soap Pool, emerging from the underlying volcanic aquifer and several mud pools/hot springs on the internal flanks of the crater which strongly interact with the current fumarolic system (steam‐heated pools). Some of these pools, the crater lake and a cold spring emerging from the 1982 pumice deposits, have been sampled and analysed. Water–volcanic gas interactions determine the heating (43–99°C) and acidification (pH 2–4) of the springs, mainly by H₂S oxidation. Significantly, in the study area, a significant NH₃ partial pressure has been also detected. Such a geochemically aggressive environment enhances alteration of the rock in situ and strongly increases the mineralization of the waters (and therefore their electrical conductivity). Two different mineralization systems were detected for the crater waters: the soap pool‐lake (Na⁺/Cl^? = 0.4, Na/Mg>10) and the crater mud pools (Na⁺/Cl^? > 10, Na/Mg < 4). A deep boiling, Na⁺‐K⁺‐Cl^?‐rich water reservoir generally influences the Soap Pool‐lake, while the mud pool is mainly dominated by water‐gas–rock interactions. In the latter case, conductivity of sampled water is directly proportional to the presence of reactive gases in solution. Therefore, chemical evolution proceeds through neutralization due to both rock alteration and bacterial oxidation of ammonium to nitrate. The chemical compositions show that El Chichón aqueous fluids, within the crater, interact with gases fed by a geothermal reservoir, without clear additions of deep magmatic fluids. This new geochemical dataset, together with previously published data, can be used as a base line with which to follow‐up the activity of this deadly volcano.     

Retrograde P–T evolution and high temperature–low pressure fluid circulation in relation to late Hercynian intrusions: a mineralogical and fluid inclusion study of the Charroux-Civray plutonic complex (north-western Massif Central, France)

The calc‐alkaline plutonic complex from Charroux‐Civray (north‐western part of the French Massif Central) displays multiphase hydrothermal alteration. Plutonic rocks, as well as early retrograde Ca–Al silicate assemblages, which have crystallized during cooling and uplifting of the plutonic series, are affected by multiphase chlorite–phengite–illite–carbonate alteration linked to intense pervasive fluid circulation through microfractures. The petrographic study of alteration sequences and their associated fluid inclusions in microfissures of the plutonic rocks, as well as in mineral fillings of the veins, yields a reconstruction of the P–T–X evolution of the Hercynian basement after the crystallization of the main calc‐alkaline plutonic bodies. This reconstruction covers the uplift of the basement to its exposure and the subsequent burial by Mesozoic sediments. Cooling of the calc‐alkaline plutonic series started at solidus temperatures (～650°C), at a pressure of about 4 kbar (1 bar = 10⁵ N m^?2), as indicated by magmatic epidote stability, hornblende barometry and fluid inclusion data. Cooling continued under slightly decreasing pressure during uplift down to 2–3 kbar at 200–280°C (prehnite–pumpellyite paragenesis). Then, a hot geothermal circulation of CO₂‐bearing fluids was induced within the calc‐alkaline rocks leading to the formation of greisen‐like mineralizations. During this stage, temperatures around 400–450°C were still high for the inferred depths (～2 kbar). They imply abnormal heat flows and thermal gradients of 60–80°C km^?1. The hypothesis of the existence of one large or a succession of smaller peraluminous plutons at depth, supported by geophysical data, suggests that localized heat flows were linked to concealed leucogranite intrusions. As uplift continued, greisen mineralization was subsequently affected by the chlorite–phengite–dolomite assemblage, correlated with aqueous and nitrogen‐bearing fluid circulations in the temperature range of 400–450°C. In a later stage, a continuous temperature decrease at constant pressure (～0.5 kbar) led to the alteration of the dolomite–illite–chlorite type in the 130–250°C temperature range.     

Origin of deep saline groundwaters in the Vienne granitic rocks (France): constraints inferred from boron and strontium isotopes

As part of a preliminary geological characterization programme to assess the feasibility of an underground laboratory in granitic rock, a series of 17 deep boreholes (maximum depth, 900 m) was drilled by ANDRA in the Vienne district, France. A salinity gradient was demonstrated in the granitic waters with concentrations varying from approximately 1 g L^?1 at 150 m depth at the top of the basement (beneath the sedimentary cover) to 10 g L^?1 in the deeper part (from 400 to 600 m depth). Sr and B isotope ratios were measured in order to better understand the origin of the salinity and to evaluate the degree of water–rock interaction in the system. The results obtained were compared to those of mineral spring waters emerging from the granitic basement in the Massif Central. Evidence in support of a significant marine contribution include: (i) the Cl–Br investigations agree with a marine origin for the saline groundwaters without evolution from seawater; (ii) the ⁸⁷Sr/⁸⁶Sr ratio of the Vienne deep groundwaters (0.7078–0.7084) is in agreement with a palaeo‐seawater isotopic signature; (iii) measured δ¹¹B values for the deepest brine samples are enriched in ¹¹B (up to 36.1‰) relative to the granitic springs. The combined use of δ¹¹B, Cl, B, Br, Sr contents and ⁸⁷Sr/⁸⁶Sr ratios makes it possible to define and quantify a mixing model between marine and crustal end‐members in order to explain the origin of the deep saline groundwaters in the Vienne granitic rocks.