Towards a typology of stone beads in the Neolithic Levant

Abstract

This study is an attempt to develop a comprehensive typology of the earliest stone bead assemblages in the southern Levant from Late Natufian and Neolithic sites. I propose this typology as a tool for studying stone beads almost a century after Horace Beck published his monumental bead typology. Beads are often neglected artifacts in archaeological excavations, but a bead typology can contribute to definitions of relative chronology and to a broader understanding of social and economic aspects of certain prehistoric societies.     

What novice knappers have to learn to become expert stone toolmakers

The aim of this paper was to determine what technical gestures must be learned in order to produce stone tools. To identify these gestures, we compared the performance of expert knappers and complete novices. We hypothesised that the differences between novices and experts would indicate which technical gestures experts had learned to successfully produce stone tools. Participants were video recorded while attempting to produce a crude handaxe. The recordings were analysed according to ethological methods used to study animal and human behaviour. The knapping performance of each participant was segmented and scored into units in order to identify the technical gestures being used. The results showed considerable differences between experts and novices in three technical gestures: the type of percussion support, the position of the blank and the angle of blow. Therefore, these three technical gestures appear to be crucial in learning to knap stone at the level of bifacial stone toolmakers. By studying how modern knappers gradually master these three technical gestures we may begin to understand how stone knapping is acquired, how bifacial stone tools emerged and what cognitive challenges early handaxe makers had to face.     

GLASS TRADE BEADS FROM THE ENGLISH COLONIAL PERIOD IN THE SOUTHEAST,CA. A.D. 1607–1783

Abstract

The study of glass trade beads has contributed much to our chronological understanding of the colonial period in the Eastern Woodlands of North America. Indeed, this class of artifact has allowed archaeologists to identify and conduct research at important archaeological sites that never appeared in the European historical record. In the Southeast, the best chronological resolution established by current bead chronologies relates either to sixteenth- to mid-seventeenthcentury Spanish-traded bead assemblages or eighteenthcentury French-traded bead assemblages. There is a conspicuous gap, however, in glass bead chronologies associated with the seventeenth- and eighteenth-century English-Indian trade in the Southeast. In this paper, I address this gap by characterizing a large sample of trade beads (n = 35,309) found in individual mortuary assemblages recovered from a number of Southeastern Indian sites. This is the first time a regional synthesis of this scale has been conducted for the English colonial period in the Southeast. In order to begin to refine the bead chronology of this period, I also present the results of a quantitative seriation (using a technique known as correspondence analysis) of the same mortuary assemblages. While the results of this exploratory technique represent a preliminary stage in this process, they nevertheless identify a number of temporal trends that can be used to derive occupation date estimates for sites spanning the English colonial period in the Southeast (ca. 1607–1783).     

Effects of distance from stone source on landscape-scale variation in Oldowan artifact assemblages in the Paleo-Olduvai Basin,Tanzania

Ongoing excavations at Olduvai Gorge, Tanzania, reveal tremendous variability among stone artifact assemblages across the Plio-Pleistocene Olduvai Lake Basin during Bed I and lower Bed II times. Theoretically, stone artifact traces of Oldowan hominin land use are determined by the distribution of larger mammal carcasses and arboreal refuge from predation as well as proximity to stone material sources.     

Glass Trade Beads from the Goose Lake Outlet #3 Site (20MQ140), Marquette County,Michigan

This article describes analyses of the glass trade-bead assemblage of the Goose Lake Outlet #3 (GLO#3) site (20MQ140), a probable short-term winter campsite located in the Upper Peninsula of Michigan. Based on typological and attribute analysis of the beads, which employed the Kidd and Kidd classification system and comparison with published “glass bead periods” or GBPs developed for assemblages in Ontario, the GLO#3 bead assemblage is assigned a date within the 1630s. Comparison with other midwestern protohistoric assemblages further supports this interpretation. Situated within a protohistoric period of intercultural interaction and exchange, the material culture from the site provides archaeological evidence for some of the earliest arrivals of European-made trade items in the Midwest.     

Sampling for Provenance: Tailings from Prehistoric Stone Quarries in the South Pacific

Stone is a principal component in archaeological assemblages across the Pacific. It provided a major element in architecture, used as trade goods, and was fashioned into implements and ornaments, monolithic monuments, statues, money, and emblematic symbols of victory, status and ethnicity. In short, stone is a pervasive element in the economic, social, and political fabric of Pacific cultural traditions. However, provenance of rock quarries, the source of this raw material, has received limited attention in Oceania. Provenance studies have been sidestepped or short-changed in the rush to analyse artifactual materials. Here we establish a foundation for more robust provenance studies and field sampling strategies through a discussion of (1) quarry identification and (2) sampling within prospective sources. A model of quarry identification, sampling, and characterization is drawn from work on Rapa Nui (Easter Island), and the fundamental precepts are outlined for future sampling experiments and provenance work in stone quarries generally.     

Chipped Stone Debitage,Material Selection,and Expedient Tool Production in Southeast Michigan

Abstract

This article summarizes the results of exploratory analyses on material sources and debitage attributes from chipped stone artifacts at sites identified and sampled by the Eastern Michigan University Field School along the Huron River Valley in southeast Michigan. Several hypotheses are tested with chipped stone debitage assemblages from 35 prehistoric sites to better understand material selection, expedient versus formal tool manufacturing, and the influence of material availability and mobility in chipped stone processing within the region. The distribution of debitage attributes (reduction stage, technology, condition, and size) are first compared by material source and quality. Then, the distributions of materials and debitage attributes are compared among small limited-use sites and two early Late Woodland small settlements. The results indicate a heavy reliance on poorer quality local cherts, and a focus on expedient tool manufacturing with both the local poorer quality and the nonlocal higher quality sources. There were no major differences in debitage assemblages between the limited use sites and the settlements.     

Lithic Modes A–I: A New Framework for Describing Global-Scale Variation in Stone Tool Technology Illustrated with Evidence from the East Mediterranean Levant

Grahame Clark’s framework for describing stone tool assemblages in terms of five technological “modes” enjoys wide use in European, African, and Asian prehistory. With greater usage and increases in the global archaeological database for prehistory, problems and weaknesses of Clark’s framework have become apparent. This paper reviews these problems and proposes an updated framework, modes A–I, for describing variability in stone tool production strategies. The value of this new framework for prehistory is illustrated using data from the East Mediterranean Levant.     

Zooarchaeology and Modernity in Iceland

This paper follows the lead of the increasing numbers of scholars utilizing the methods and theory of environmental archaeology within historical archaeology. This paper addresses the issue of ??modernity?? in early modern Iceland through the analysis of faunal assemblages from historic sites in Iceland. It examines the idea of modernity through the ideas of commoditization of animals as well as the improvement of domestic animals as seen through these faunal assemblages. There are a number of possible faunal indications of processes associated with modernity in the existing historic assemblages of Iceland though at least some of these have deep roots in the medieval period. Examining the idea of modernity through the faunal assemblages of historic-period Iceland both help refine the idea of modernity as well as reveal the medieval roots of much of what we term ??modern??.     

Organizational structure at the Mauna Kea Adze quarry complex,Hawaii

The aim of this paper is to demonstrate that it is possible to define the organizational structure at prehistoric stone quarries by examining two aspects of stone tool production: the spatial distribution of debitage, and differential stoneworking skill. Analyses of debitage collected from the Mauna Kea Adze Quarry in Hawaii will be compared with experimentally produced data to achieve the aim of the paper. The results of these analyses indicate that the labour forces at the Mauna Kea Adze Quarry were well organized. It is suggested that labour parties were organized into groups of two, with expert craftsmen working where material was abundant and novices or apprentices working where they could practise their craft without wasting important resources.     

Twisted Lives: On the Temporality and Materiality of Biographical Presences

People??s biographies are dominated by a multitude of factors. In recent years it has come to a general understanding that people??s life histories are embedded in things just as things are premising the biographies of people. Still, the scholarly discussion has concentrated heavily on individual biographies resulting in life-histories of bodies and individuals confined by their bodily framework rather than conceptualizing the person through the mutual interaction between people and things and the interrelationship between various presences in the revelation of the temporality and materiality of biography. In this paper I aim to explore the category of personal biography resting upon aspects of Heideggerian philosophy. I argue for biographical presences that are spread across time, subjected to shared participation and intrinsically intertwined with the narratives they generate. The argumentation rests upon my personal involvement with the biography of a seventeenth-century peasant from the farm Búearárbakki in southern Iceland. The site and its material culture have emerged as the cause and consequence of our shared life-histories manifesting the notion of multi-temporality and materiality to the category of biography.     

High-Tech Foragers? Folsom and Later Paleoindian Technology on the Great Plains

Archaeologists generally argue that early (ca. 11,000–8000 B.P. populations on the North American Great Plains moved over very large areas, relying on sophisticated, biface-based flaked stone technology and on extensive resharpening and recycling of tools to cope with unpredictable access to raw material sources. This paper reviews the development of this reconstruction and considers the degree to which data from assemblages of Paleoindian flaked stone tools support it. Published information implies that patterns of raw material use vary greatly over the Plains, that bifaces were not the centerpiece of Paleoindian technology, that there are no published efforts to document an unusual degree of resharpening or recycling, and that the data that are available on these topics do not suggest that either was important. Detailed analysis of one assemblage, from the Allen site in southwestern Nebraska, carried out with these issues in mind, shows similar patterns. The great difference between what the literature says about Paleoindian technology and the documented character of that technology suggests that Paleoindian lifeways were far more variable than current discussions suggest.     

Oldowan behavior and raw material transport: perspectives from the Kanjera Formation

The archaeological record of Oldowan hominins represents a diverse behavioral system. It has been suggested that exploitation of lithic resources by Oldowan hominins was simplistic and represented mostly use of local sources of stone. Here we investigate the raw material selection and transport behaviors of Oldowan hominins reflected in the stone artifact assemblages from the Kanjera South Formation, South Rachuonyo District, Kenya. Using geochemical methods (ED-XRF) artifacts are linked to primary and secondary source outcrops throughout southwestern Kenya. These data show that hominins selected raw materials for transport at frequencies that are significantly different from their availability on ancient landscapes. Furthermore, a substantial proportion of the assemblage represents transport over relatively long distances (>10 km). Our study further suggests that in the early stages of stone tool use hominins used a wide variety of raw materials and selected these materials at some distance from their eventual discard locations. Early hominin behavior may have incorporated an understanding of raw material source distributions across a more extensive landscape than has been previously documented. This supports the growing perspective that Oldowan technology represents a more complex behavioral pattern than is usually associated with the beginnings of hominin tool use.     

Non-destructive spectroscopic investigation of artefacts from middle Hallstatt period—case study of a stone bead from Tărtăria I hoard,Romania

A stone bead, part of a necklace found in a middle Hallstatt period—type of settlement—the T?rt?ria site in Alba County, Romania, was investigated following a non-destructive approach, by means of energy-dispersive X-ray fluorescence spectrometry and Fourier transform infrared spectroscopy. The highly heterogenous object, found together with numerous bronze and iron objects, appeared to be a variety of chalcedony rich in iron and copper impurities, still preserving clay minerals from the sedimentary matrix in some of the areas. Organic molecules found at the surface of the stone artefact may indicate the presence of a wax or resin residue, possible evidence of early craft specialization. The non-destructive protocol applied allowed an in-depth characterization of the artefact, providing important information not only on the crystal structure but also on the diagnostic impurities present within this peculiar stone bead.     

Missing the boat in lithic procurement: Watercraft and the bulk procurement of tool-stone on the Maritime Peninsula

Recent research has characterized the procurement of lithic raw materials for flaked stone technology as embedded in food procurement activities, and constrained by logistical factors such as mass, time, and energy. Many have assumed that these variables reflect the need for humans to both move themselves to resources, and carry materials with them. This paper explores the implication of these ideas through the development of particular research project in the Maritime Peninsula, in the Northeast of North America. Through this research process, I explore the complex interplay among raw materials, bulk procurement, water transportation, and regional patterning of archaeological lithic assemblages. I initially consider the role of embedded procurement as a structuring mechanism for the relationship between lithic raw-material diversity and catchment, but through a exploration of intersite and inter-feature variability, I consider the role of bulk procurement in this patterning. I conclude that canoes may significantly influence hunter–gatherer lithic procurement, in terms of the extraction of resources, and their reduction and use.     

Core Use-Life Distributions in Lithic Assemblages as a Means for Reconstructing Behavioral Patterns

Artifacts with varying use-lives have different discard rates and hence are represented unequally among archaeological assemblages. As such, the ability to gauge the use-lives of artifacts is important for understanding the formation of archaeological assemblage variability. In lithic artifacts, use-life can be expressed as the extraction of utility, or work potential, from existing stone volume. Using experimental data and generalized linear modeling, this study develops models of artifact use-life on cores in the form of reduction intensity. We then apply these models to two archaeological case studies to (a) reconstruct the reduction intensities of archaeological cores and (b) investigate the survivorship curves of these archaeological cores across the reduction continuum using the Weibull function. Results indicate variation in core reduction and maintenance with respect to raw material properties and place use history and implicate evolutionary differences between Early Stone Age hominins and Holocene modern humans.     

A tale of two sites: Functional site differentiation and lithic technology during the Late Pithouse period in the Mimbres area of Southwestern New Mexico

The raw materials from which stone tools are made can provide considerable information relevant to behavioral variation within a prehistoric population. By examining the stone used for tools from two different types of Late Pithouse period (A.D. 550-1000) residential sites from the Mimbres Mogollon area of Southwestern New Mexico, this paper illustrates how understanding the lithic landscape of a region provides a means to assess behavioral variation in stone procurement practices. The analysis indicates that the differences in mobility and economic pursuits between longer-term residential sites containing pit structures and a shorter-term seasonal residential site with ephemeral architecture structured the raw material procurement practices of site’s occupants. Pit structure sites were focused on agricultural pursuits and used a technology that centered on the production of informal tools fashioned from locally available raw materials. The seasonal residential site focused on wild resources and evidenced greater reliance on formal tool production using raw materials acquired from beyond the immediate vicinity of the site. Despite increasing sedentism and agricultural dependence of the region’s population, some portion of the population exercised seasonal mobility strategies and associated technological and behavioral practices more typical of hunting and gathering populations, suggesting a diverse socio-economic system within the region.     

Vein quartz in lithic traditions: an analysis based on experimental archaeology

Worldwide, vein quartz was a commonly used raw material for stone tools but this material has proved difficult for archaeologists to analyse because many quartz assemblages appear to be comprised of amorphous pieces, not easily recognised as humanly modified or forming ‘tools’. This paper discusses the analysis of the debitage – focusing on the debitage fragmentation rate, the debitage, break, and fragment types, and the quantitative analysis of the complete flakes – resulting from experimental knapping of quartz, which formed part of a project which investigated the use of quartz in Irish prehistoric lithic traditions. The results have highlighted the complexity involved in analysing quartz assemblages, and the significant differences between the debitage products of quartz and chert knapping assemblages. While bipolar knapping is generally easy to differentiate from direct percussion, it is harder to differentiate between soft and hard hammer percussion.     

Raw material quality and Oldowan hominin toolstone preferences: evidence from Kanjera South,Kenya

The role of raw material quality in Oldowan technology has not been fully explored. There are numerous studies suggesting Oldowan hominins preferred certain types of stone for artifact manufacture. Previous studies of the artifact assemblage from the early Pliocene Oldowan locality of Kanjera South (South Rachuonyo District, Kenya) show that raw material selection and transport was an important aspect of Late Pliocene hominin adaptations. Yet the exact properties of stones that hominins were selecting remain enigmatic. Two potentially important features of artifact raw material are durability and fracture predictability. We investigate fracture predictability through mechanical tests of stone and investigations of the affect of stone properties on fracture patterns in archaeological collections. We investigate stone durability with actualistic studies of edge attrition combined with further mechanical tests of various lithologies. Oldowan hominins at Kanjera appear to have selected raw materials based on their durability. The ability for a stone to fracture consistently does not appear to be as important in hominin toolstone preference as previously assumed. Hominins that produced the assemblages at Kanjera South appear to have incorporated an extensive understanding of various attributes of raw material in the transport and production of stone artifacts. When combined with previous research on the transport patterns at Kanjera, the results of this study provide evidence for a more complex raw material acquisition strategy than has previously been suggested for Late Pliocene Oldowan hominins.     

Experimentation in the Formation of Edge Damage: A New Approach to Lithic Analysis

Abstract

The paper describes a series of experiments recently carried out to test the formation of edge-damage on flaked stone tools which results from their being used in various tasks. Variables that were systematically tested include action, worked material, angle of the edge, and grip. The main criterion in distinguishing different patterns of damage was microflaking rather than abrasion in the form of striations and polish.

The results of these experiments may be applied to the identification of patterns of damage to the edges of prehistoric stone tools. The information gained from such microwear analysis may be used not only to provide details on the activities and settlement organization of prehistoric societies, but also to provide an important new dimension to lithic analysis in general. In lithic analysis, the main criteria of change have been the macromorphological features of the tools. It is our contention, however, that the additional information on the function of the tools, which is provided by microwear analysis, can contribute to the greater understanding of the processes of change in lithic assemblages and culture change as a whole.

The experimental program was designed to test the formation of edge-damage on implements manufactured in European chalk flint. It was to aid in the identification of wear patterns on lithic assemblages from the neolithic period in Central and Eastern Europe, a project in which the authors were involved. Its relevance, however, includes directly those assemblages of the post-Pleistocene period in temperate and Mediterranean Europe. The results of the experiments may also be useful, it is hoped, for lithic analysis in general, both in the Old and New World.