Elevated lead exposure in Roman occupants of Londinium: New evidence from the archaeological record

The evolution of metallurgical practices over several millennia has resulted in human exposures to a diverse variety of toxic elements. These exposures were not just confined to the metalworkers, but in many cases broadly impacted the larger community and society. The role of lead in Roman civilization is particularly fascinating, where the available evidence of lead use in a myriad of applications by Roman civilization suggests the potential for elevated exposures. The present paper addresses the hypothesis that because of these practices, Roman occupants of ancient Londinium (43–410 ad ) were exposed to levels of lead that far exceeded exposures in the preceding populations of Iron Age Britain (700 bc –43 ad ). The elemental content and stable lead and strontium isotopic signatures of 30 femora from three Londinium cemeteries and radiocarbon-dated representative burials were examined and the results then compared with 70 femora dating to the pre-Roman Iron Age from the well-known Iron Age hillfort of Danebury, Hampshire, and from three cemeteries in East Yorkshire. Extensive efforts were directed at the minimization of sediment and soil contamination, the assessment of contamination from burial artefacts and a careful review of the burial context of specimens. Data for lead and 20 additional trace and major elements were obtained by magnetic sector inductively coupled plasma mass spectrometry (ICPMS), after acid dissolution of pre-cleaned bone cores. Lead isotope ratios in the bone core digests (and burial soils) were measured by multi-collector ICPMS. It was found that concentrations of lead in the Roman/Londinium-era femora were > 70-fold greater than those from pre-Roman populations. This was confirmed by femoral data obtained from the analysis of a pre-Roman burial from the early first century bc found adjacent to the Southern Cemetery. Several major and trace element metrics for diagenesis demonstrate that levels of lead in the bone are robust indicators of human exposure during life. Lead isotope data for the Roman population are consistent with previously identified widespread lead pollution. The pre-Roman populations contain lead isotopic compositions consistent with highly localized, minor sources of lead. Together, these data provide unequivocal confirmation that the Romans in Londinium were exposed to elevated lead levels. Elevated blood lead levels would have resulted, negatively affecting their health and possibly contributing to declining birth rates.     

Trace Element Classification Diagrams of Pyroclastic Rocks from the Volcanic Districts of Central Italy: the Case Study of the Ancient Roman Ships of Pisa

Identification of the volcanic material (pozzolan) stored in a Roman ship of the fourth to third century bce , wrecked in the ancient harbour of Pisa (central Italy), was based on ratios of selected trace elements. The compositions of the major volcanic products erupted by the volcanoes of the Roman province, including the volcanic districts of Latium (Vulsini, Vico, Monti Sabatini and the Alban Hills) and Campania (Roccamonfina, the Phlegraean Fields, Ischia, Procida and Vesuvius) are compared with the pozzolan from the Pisa ship. Superposition of the Zr/Y, Nb/Y and Nb/Zr ratios of the pyroclastic material from the wrecked ship (computed from the published literature) allows correlation with the products of the Onano eruption from the Vulsini Volcanic District. The Vulsini rocks outcrop extensively in a sector drained by the hydrographic network of the Fiora River, which has been a well‐developed commercial water trade route since Etruscan times, with a river port and a sea port connected to the important town of Vulci, and, since 273 bce , part of the larger Roman harbour system of Cosa.     

Production of the Roman Cement in Italy: characterization of a raw material used in Tuscany between 19th and 20th century and its comparison with a commercialized French stone material

An experimental approach in order to investigate the possibility that some Italian limestones were used for the production of Roman Cement is proposed. Three types of Pietra Alberese, a marly limestone used since Roman times for the production of “lime” in Tuscany (Italy), were selected. By burning of these stones, specimens of binders were realized. The characteristics of these binders were compared with the binder obtained by burning a French marly limestone commercially used for the production of Roman Cement.

All samples of carbonate stones were preliminarily characterized from the chemical, mineralogical, and petrographic point of view. The colorimetric coordinates were measured on both rock samples and hardened binder samples. The analysis carried out shows that Pietra Alberese with an high content of clay minerals develops a similar microstructure with respect to that developed by the French marly limestone used for the production of Roman Cement.     

The mineralogy and petrography of Low Lands Ware 1 (Roman lower Rhine–Meuse–Scheldt basin; the Netherlands,Belgium, Germany)

Over the last 80 years Belgian, Dutch and German archaeologists working in the lower Rhine–Meuse–Scheldt basin have encountered a Roman pottery group that occurs in large quantities at most Roman sites in the region. Several researchers have separately tried to define this pottery, resulting in different names. Petrographic and geochemical analyses of 100 samples have now shown that the production of this ware predominantly made use of one source of raw material, divisible into three sub-groups on the basis of technological choices. The probable source lies in the early-Pleistocene Tegelen-formation, a clay rich in muscovite mica and garnet, which outcrops in the tertiary Scheldt escarpment (Nl) and the campine microcuesta (B). On the basis of geographical characteristics, Roman finds and the presence of a large Medieval pottery industry, production in the Bergen-op-Zoom area is suggested. In view of these new findings the name ‘Low Lands Ware 1’ is introduced to refer to this pottery group.     

PROVENANCING AND ARCHAEOLOGY OF ROMAN MILLSTONES FROM SARDINIA (ITALY)

Summary. Sardinia was an important Roman settlement and trade centre between 238 BC–500 AD and is an ideal site for study of Roman trade. Study of Roman millstones in Sardinia shows that the commonest type is the Pompeian (hour-glass) mill (forty-eight stones studied), with smaller numbers of cylindrical hand querns (sixteen stones studied). Most of these millstones are composed of igneous rocks which include grey vesicular lavas of basic/intermediate composition and a distinctive reddish rhyolitic ignimbrite. There is historical and archaeological evidence for millstone manufacture at six localities in Sardinia. Visual and petrographic study and X-ray fluorescence analysis for major and trace elements of seventeen millstone samples, and fifty rock samples from potential source areas have been used to provenance the igneous rock millstones. The grey vesicular lava millstones have varied sources within the Tertiary-Recent volcanic rocks of Sardinia, while the millstones composed of rhyolitic ignimbrite are from a single source of Tertiary ignimbrite at Mulargia (central west Sardinia). A single hand mill from the north of Sardinia was imported probably from Agde in southern France, and is the only sample composed of non-local rock. Mulargia millstones were widely traded within the western Mediterranean and show a rapid decrease in frequency of occurrence with increasing distance from the source. Sardinia was therefore an important centre of Roman millstone production and a source of millstone trade during the period of Roman settlement.     

Production technology and knowledge transfer of calcite-tempered grey ware bowls from 2nd- to 5th-century ce Noricum (Austria)

Aspects of 2nd- to 5th-century ce Roman production technology and knowledge transfer in southern Austria (known as Noricum) were examined. With no evidence for workshops identified in the study area, 44 grey ware bowls from two sites at Aguntum and Lavant were studied macroscopically, and combined with optical microscopy, X-ray powder diffraction, prompt gamma activation, neutron activation and scanning electron microscopy, in order to understand whether one (large) workshop supplied these bowls, or whether the bowls were produced by several (small) workshops nearby. Combined with information from the geological background, the results were used to tentatively indicate the production location. The results indicate that the grey ware bowls from Aguntum and Lavant were produced by local workshops nearby. The bowls were manufactured with similar clay sources, tempered with crushed calcite-marble rocks from the Tauern Window, their surface smoothed and burnished, and fired between 800 and 850°C in a reducing atmosphere of an open fire. This is taken to suggest that Roman potters, who were located at Aguntum and Lavant, shared strategies of raw materials selection, paste preparation, finishing and firing, and transferred technological knowledge through time.     

The colourless glass of Iulia Felix

The present paper focuses on 85 colourless glass samples selected among the recycling cullet found in the Roman ship Iulia Felix, wrecked off the town of Grado (province of Udine, North Italy) in the first half of the 3rd century AD, with the aim of examining their chemical composition, investigating similarities within and between the three established group types (cups, plates, bottles), and comparing the chemical compositions of the Iulia Felix glass samples with groups reported in the literature for colourless glasses. Chemical analyses, performed by X-ray fluorescence and electron microprobe, indicate that the samples were all soda-lime–silica in composition, with natron as flux, according to typical Roman production technologies. Chemical data are treated by multivariate statistical tools, such as cluster analysis and the NPC test. Statistical analyses allow us to conclude that the Iulia Felix colourless glasses were produced by at least two different production technologies related to group type, confirming the trend recently identified in the literature. In addition, the trace element patterns (particularly those of Sr, Zr and Ba) suggest that beach sand with differing amounts of alkali feldspars was predominantly used as raw material, like those specifically mentioned by Pliny for glass production.     

Analyses of colourless Roman glass from Binchester,County Durham

Forty samples of Roman colourless glass tableware from Binchester, dating from the 1st to mid-3rd centuries AD, were analysed using ICP spectrometry and parallels were sought with similar studies of Roman glass from Colchester and Lincoln [C. Mortimer, M.J. Baxter, Analysis of Samples of Colourless Roman Vessel Glass from Lincoln, Ancient Monuments Laboratory Report 44/1996, 1996; H.E.M. Cool, J. Price, Roman vessel glass from excavations in Colchester, 1971–1985, Colchester Archaeological Report 8, Colchester Archaeological Trust Ltd. and English Heritage, Colchester, 1995; M.P. Heyworth, M.J. Baxter, H. Cool, Compositional Analysis of Roman Glass from Colchester Essex, Ancient Monuments Laboratory Report 53/1990, 1990]. Some samples from the Binchester, Colchester and Lincoln (BCL) groups were re-analysed using energy dispersive spectrometry (SEM–EDS) and the results were used to compensate for the differences in reproducibility between the ICP data sets, so that these could be directly compared. The majority of the glass from all three sites was similar but some distinct compositional characteristics were identified that were specific to certain types of ware. There were differences in the concentration of lead in the samples, which appear to be to some extent chronological. The compositional data for the glass from Binchester, Colchester and Lincoln were also compared to literature data for various types of natron glass produced in the 1st millennium AD.     

Petrochemical Identification and Insights on Chronological Employment of the Volcanic Aggregates Used in Ancient Roman Mortars

Through the assistance of trace element and petrographic analyses on 14 samples of mortar aggregates from Roman monuments, including the Porticus Aemilia, the Temple of Concordia, the Temple of the Dioscuri, Temple B and other structures of the Area Sacra di Largo Argentina, and the Villa di Livia, we establish the source area and we investigate the chronological employment of the volcanic materials used in ancient Rome's masonry. In contrast to previous inferences, the petrochemical data presented here show that systematic exploitation of the local ‘Pozzolane Rosse’ pyroclastic deposit has occurred since the early development of concrete masonry, at the beginning of the second century bc , through the early Imperial age. Subsequently, exploitation was extended to the overlying Pozzolane Nere and Pozzolanelle deposits. Only during the early phase of development of the concrete masonry in Rome, volcaniclastic sediments outcropping near the construction sites were mixed with the sieved remains of the tuff employed as the coarse aggregate, to produce the fine aggregate. The results of the study on the investigated monuments suggest the possibility of establishing the chronological identification of three different types of mortars, as a function of the composition of the volcanic material employed in the fine aggregate, which, when implemented by future studies, may contribute to the dating of monuments and archaeological structures.     

Pliny the Elder and Sr–Nd isotopes: tracing the provenance of raw materials for Roman glass production

In Roman and Byzantine times, natron glass was traded throughout the known world in the form of chunks. Production centers of such raw glass, active from the 4th to 8th century AD, were identified in Egypt and Syro-Palestine. However, early Roman primary glass units remain unknown from excavation or scientific analysis. The ancient author Pliny described in 70 AD that besides Egyptian and Levantine resources, also raw materials from Italy and the Gallic and Spanish provinces were used in glass making. In this study, the primary provenance of 1st–3rd century AD natron vessel glass is investigated. The use of combined Sr and Nd isotopic analysis allows the distinguishing and characterizing of different sand raw materials used for primary glass production. The isotope data obtained from the glass samples are compared to the signatures of primary glass from known production centers in the eastern Mediterranean and a number of sand samples from the regions described by Pliny the Elder as possible sources of primary glass. Eastern Mediterranean primary glass has a Nile dominated Mediterranean Nd signature (higher than −6.0 ? Nd), while glass with a primary production location in the western Mediterranean or north-western Europe should have a different Nd signature (lower than −7.0 ? Nd). Most Roman glass has a homogeneous ⁸⁷Sr/⁸⁶Sr signature close to the modern sea water composition, likely caused by the (intentional) use of shell as glass raw material. In this way, strontium and neodymium isotopes now prove that Pliny's writings were correct: primary glass production was not exclusive to the Levant or Egypt in early Roman days, and factories of raw glass in the Western Roman Empire will have been at play.     

ISOTOPES ON THE BEACH,PART 1: STRONTIUM ISOTOPE RATIOS AS A PROVENANCE INDICATOR FOR LIME RAW MATERIALS USED IN ROMAN GLASS‐MAKING

The provenancing of Roman natron glass is one of the most challenging problems in the field of archaeometry. Although the use of Sr and Nd isotope ratios and trace element signatures as an indication of provenance has proven promising, there are still many unknowns. In this study, the influence of the different raw materials on the final Sr isotopic composition of Roman natron glass is examined. It is shown that the ⁸⁷Sr/⁸⁶Sr ratio in natron glass is significantly influenced by the silicate fraction of the sand used and does not always provide a clear indication of the lime source used.     

Schmitt and the Sovereignty of Roman Dictators: From the Actualisation of the Past to the Recycling of Symbols

The aim of this article is to analyse the complex roots of Carl Schmitt's theory on dictatorship in the classical world through the lens of classical receptions. It argues that Schmitt was deeply engaged with the classical tradition in formulating his theory on dictatorship. Knowingly or unknowingly, Schmitt legitimates his theory through a foundation in both the Roman idealisation of the virtuous dictators of the early Republic as well as the long tradition of the narrative of the enlightened sovereign as a guarantor of law, present in both Greek and Roman antiquity and in the subsequent European tradition. Schmitt skilfully repurposed the Roman historical tradition on dictators but glossed over the traditional antipathy of Roman republicanism towards sovereign rule. The claim that this article is presenting is that even though it has been overlooked by earlier scholars, Schmitt was both directly and indirectly influenced by the classical tradition of dictatorship and utilised their mythical and symbolic dimensions in the later Roman and the subsequent European legal and political traditions. The reason for this omission was that Schmitt, like his contemporaries, belonged to one of the last generations to be groomed in the classical tradition of literature.     

Unveiling the Use of Creta in Roman Plasters: Analysis of Clay Wall Paintings From Brixia (Italy)

The paper describes the analysis of a particular kind of plaster from the walls of the Roman Sanctuary (first half of the first century bce ) in the centre of Brixia (now Brescia, Italy), which is an outstanding example of Roman Republican architecture. The walls were plastered and painted with different patterns, imitating marble panels and curtains. Optical microscopy on thin sections, X‐ray diffraction and infrared spectroscopy were performed on several samples of the plaster in order to reveal the execution technique. The palette consisted of glauconite, celadonite, Egyptian blue, and red and yellow ochres. In some cases, an organic compound, possibly a lipidic compound, was present in the external paint layer, as a surface treatment. The plaster contains two superimposed coats: the render coat with lime binder and sandy aggregate; the finish coat with a clay fraction (illite, chlorite, kaolinite), together with calcite from slaked lime and grains of quartz, silicate and carbonate rocks. Although Vitrivius' De architectura reported the use of creta (clay) as daub smeared on reed vaults, the Sanctuary of Brixia represents the first documented use in Roman buildings in a painted plaster laid on a stone masonry wall.     

Roman Builders Facing the Risk of Disaster: Coupling Archaeological and Geochemical Analyses on a Section of the ‘Aqua Augusta’ (the Roman Serino Aqueduct,Southern Italy)

Four samples of carbonate sinters from two sites of the Roman Serino aqueduct were studied in order to better constrain the history of the aqueduct and to estimate to what extent natural hazards can be recorded in such deposits. Micromorphological observations, trace element, stable oxygen and carbon isotope analyses were performed on the samples. Together with new quantitative observations on the construction techniques of the aqueduct, our results highlight the imprint left by geological hazards on the Serino aqueduct. Damage, disruption, ground movement and a debris‐flow are evidenced.     

Attempts at thermoluminescence dating of fired materials from the Przeworsk Culture settlements

The thermoluminescence (TL) dating method has a significant measurement error margin reaching almost 10%. Due to this fact it could be considered as little effective in case of such sites from the Roman period as burial grounds with many artefacts useful for archaeological dating. However, for many settlements from this period, where pottery is the only kind of artefacts, the TL method can give notable results. The main purpose of the study was to make an attempt at TL dating of pottery and clay daub samples from the Nieszawa Kolonia and Kręcieszki sites and to compare the obtained dates with the results of archaeological dating of selected features from the Przeworsk Culture settlements. In the Kręcieszki site the fragments of burnt clay daub were dated by the TL method for the first time in the Lublin laboratory. It turned out that clay daub is an equally good dating material as pottery. It can be found that the TL dating of pottery from Nieszawa Kolonia confirms two stages of settlement. The first settlement stage is related to the phases B2-B2/C1-C1a of the Roman period, i.e. from the beginning of the 2^nd to the beginning of the 3^rd century. The second group of TL dates corresponds to the phases C2D that is to the second stage of settlement, from the second half of the 3^rd century to the half of the 5^th century AD. The results of TL dating of pottery and clay daub in the Kręcieszki site are rather similar and correspond to the phase B1/B2 of the period of Roman influence, determined from pottery style, but can also indicate the phase B2/C1.     

On the Trail of the Oldest Domestic Cat in Poland. An Insight from Morphometry,Ancient DNA and Radiocarbon Dating

It is believed on the basis of archaeozoological research that the domestic cat appeared in Central Europe during the Roman Period. In Poland, the domestic cat is a common species in medieval deposits. Only a few finds of cat remains of pre‐medieval age have been reported from Poland to date, including several specimens from deposits older than the Roman Period, dated to the pre‐Roman Period and even the Bronze Age. To clarify the earliest history of the domestic cat in Poland, the paper presents a review of the available published cat remains and adds some data about newly discovered remains. Combined methods of morphometry and ancient DNA were applied to enable distinction of wildcats and domestic cats. The domestic cat remains were radiocarbon dated. In six cases of domesticated cat reported in the literature, five were positively taxonomically verified, both by morphology and by genetic analysis, and one was recognised as a European wildcat. According to radiocarbon chronology, the oldest studied find is dated to the fourth–third century bc and represents a wildcat. Only two individuals of domestic cat – skeletons from Łojewo and Sławsko Wielkie, both from Kuyavia region (central‐northern Poland) – represent the Roman Period (first–third century ad ), and they are the oldest confirmed domestic cats in Poland. Copyright © 2015 John Wiley & Sons, Ltd.     

A Late Hellenistic–Early Roman Fortress at Khirbat Mudayna as-Saliya,Central Jordan

ABSTRACT

Mudayna as-Saliya is a fortress site at the summit of an isolated promontory near the eastern end of Wadi Mujib, central Jordan. Archaeological surveys of the site have exposed potential evidence of Iron Age and classical period use with its occupational zenith in the late Hellenistic-early Roman period. The ruin on the surface is remarkably similar in architectural and hydrological design to the fortress of Machaerus. This paper, based on available survey data, suggests that the Hasmoneans were responsible for the construction of the fortress at Mudayna as-Saliya, which was reused by the Nabateans during the early Roman period. Finding a potential Hasmonean desert fortress on the desert fringe of eastern Transjordan was unexpected, and it might have significant ramifications for the study of Hasmonean, Herodian, and Nabatean kingdoms in central Jordan.     

Identification of Pigments in Hellenistic and Roman Funeral Figurines

Microsamples removed from funeral figurines, which were found in two Hellenistic (third to second centuries bc ) and two Roman (first to second centuries ac ) tombs in the centre of Thessaloniki, Greece, are investigated following a multi‐analytical approach. Polarized light microscopy (PLM), X‐ray fluorescence (XRF) spectroscopy, micro‐Raman spectroscopy and high‐performance liquid chromatography coupled with a diode array detector (HPLC–DAD) are employed to identify both inorganic and organic pigments. PLM is useful to reveal the combinations of the colourants, which are identified as follows. Red ochre, cinnabar, yellow ochre, Egyptian blue, carbon black, calcite, dolomite and quartz are identified using XRF and Raman spectroscopy. HPLC–DAD is used to identify the organic colourants, which are rarely detected in painted objects of the Hellenistic and Roman period. In particular, cochineal and madder are found in six samples extracted from Hellenistic figurines. This is the first study describing the unequivocal identification of cochineal in Hellenistic objects. Furthermore, madder is identified in one sample dated to the Roman period. Madder lakes detected in the samples contain high amounts of purpurin; alizarin is either not detected or detected in trace amounts.     

Geoarchaeological insights from a Roman age incineration feature (ustrinum) at Enconsta de Sant'Ana (Lisbon,Portugal)

Ustrina are incineration funerary structures that are relatively common in Roman age cemeteries. Salvage excavations at Encosta de Sant'Ana (Lisbon, Portugal) in 2002 brought to light a part of the necropolis of the Roman town of Olisipo, including some ustrina. One of them, designated Burial 1 during fieldwork, is analyzed here from a geoarchaeological viewpoint to understand the formation processes of such an archaeological feature, namely its construction technique, use and function. The study of site context and subsurface pedofeatures, and the application of archaeological soil micromorphology, revealed that the ustrinum was constructed digging a hollow in bedrock and building a mud-brick ridge around it, with raw material taken from the local bedrock. The structure was used at various times and remodelled at least once, and its base was not always thoroughly cleaned – according to the custom called “pars pro toto” by Roman authors – and probably left open when not in use.     

Livestock Trade during the Early Roman Period: First Clues from the Trading Post of Empúries (Catalonia)

Written sources show that livestock were traded during the Roman period. However, there is scarce information available to characterise this trade because of its invisibility in the archaeological record. In our paper, we shed light on this issue by applying both osteometric and genetic analyses on cattle remains from the Roman trading post of Empúries (Catalonia) to determine how livestock contributed to Roman trade and, thus, to the economy of the Empire. Analysis of 26 cattle metacarpals from Empúries has allowed us to document the presence of different cattle morphotypes in this city during its Early Roman occupation. The morphological and genetic differences seen in Empúries cattle can be explained through trade of different cattle varieties, more appropriate for milk production and/or traction than the local stock. Once arrived at the port of Empúries, these imported cattle would have then been distributed to surrounding villas. Copyright © 2016 John Wiley & Sons, Ltd.