Long‐term chemical evolution and modification of continental basement brines – a field study from the Schwarzwald,SW Germany

Highly saline, deep‐seated basement brines are of major importance for ore‐forming processes, but their genesis is controversial. Based on studies of fluid inclusions from hydrothermal veins of various ages, we reconstruct the temporal evolution of continental basement fluids from the Variscan Schwarzwald (Germany). During the Carboniferous (vein type i), quartz–tourmaline veins precipitated from low‐salinity (<4.5wt% NaCl + CaCl₂), high‐temperature (≤390°C) H₂O‐NaCl‐(CO₂‐CH₄) fluids with Cl/Br mass ratios = 50–146. In the Permian (vein type ii), cooling of H₂O‐NaCl‐(KCl‐CaCl₂) metamorphic fluids (T ≤ 310°C, 2–4.5wt% NaCl + CaCl₂, Cl/Br mass ratios = 90) leads to the precipitation of quartz‐Sb‐Au veins. Around the Triassic–Jurassic boundary (vein type iii), quartz–haematite veins formed from two distinct fluids: a low‐salinity fluid (similar to (ii)) and a high‐salinity fluid (T = 100–320°C, >20wt% NaCl + CaCl₂, Cl/Br mass ratios = 60–110). Both fluids types were present during vein formation but did not mix with each other (because of hydrogeological reasons). Jurassic–Cretaceous veins (vein type iv) record fluid mixing between an older bittern brine (Cl/Br mass ratios ~80) and a younger halite dissolution brine (Cl/Br mass ratios >1000) of similar salinity, resulting in a mixed H₂O‐NaCl‐CaCl₂ brine (50–140°C, 23–26wt% NaCl + CaCl₂, Cl/Br mass ratios = 80–520). During post‐Cretaceous times (vein type v), the opening of the Upper Rhine Graben and the concomitant juxtaposition of various aquifers, which enabled mixing of high‐ and low‐salinity fluids and resulted in vein formation (multicomponent fluid H₂O‐NaCl‐CaCl₂‐(SO₄‐HCO₃), 70–190°C, 5–25wt% NaCl‐CaCl₂ and Cl/Br mass ratios = 2–140). The first occurrence of highly saline brines is recorded in veins that formed shortly after deposition of halite in the Muschelkalk Ocean above the basement, suggesting an external source of the brine's salinity. Hence, today's brines in the European basement probably developed from inherited evaporitic bittern brines. These were afterwards extensively modified by fluid–rock interaction on their migration paths through the crystalline basement and later by mixing with younger meteoric fluids and halite dissolution brines.     

High‐temperature magmatic fluid exsolved from magma at the Duobuza porphyry copper–gold deposit,Northern Tibet

The Duobuza porphyry copper–gold deposit (proven Cu resources of 2.7 Mt, 0.94% Cu and 13 t gold, 0.21 g t^?1 Au) is located at the northern margin of the Bangong‐Nujiang suture zone separating the Qiangtang and Lhasa Terranes. The major ore‐bearing porphyry consists of granodiorite. The alteration zone extends from silicification and potassic alteration close to the porphyry stock to moderate argillic alteration and propylitization further out. Phyllic alteration is not well developed. Sericite‐quartz veins only occur locally. High‐temperature, high‐salinity fluid inclusions were observed in quartz phenocrysts and various quartz veins. These fluid inclusions are characterized by sylvite dissolution between 180 and 360°C and halite dissolution between 240 and 540°C, followed by homogenization through vapor disappearance between 620 and 960°C. Daughter minerals were identified by SEM as chalcopyrite, halite, sylvite, rutile, K–feldspar, and Fe–Mn‐chloride. They indicate that the fluid is rich in ore‐forming elements and of high oxidation state. The fluid belongs to a complex hydrothermal system containing H₂O – NaCl – KCl ± FeCl₂ ± CaCl₂ ± MnCl₂. With decreasing homogenization temperature, the fluid salinity tends to increase from 34 to 82 wt% NaCl equiv., possibly suggesting a pressure or Cl/H₂O increase in the original magma. No coexisting vapor‐rich fluid inclusions with similar homogenization temperatures were found, so the brines are interpreted to have formed by direct exsolution from magma rather than trough boiling off of a low‐salinity vapor. Estimated minimum pressure of 160 MPa imply approximately 7‐km depth. This indicates that the deposit represents an orthomagmatic end member of the porphyry copper deposit continuum. Two key factors are proposed for the fluid evolution responsible for the large size of the gold‐rich porphyry copper deposit of Duobuza: (i) ore‐forming fluids separated early from the magma, and (ii) the hydrothermal fluid system was of magmatic origin and highly oxidized.     

Fluid mixing induced by hydrothermal activity in the ordovician carbonates in Tarim Basin,China

Permian hydrothermal activity in the Tarim Basin may have been responsible for the invasion of hot brines into Ordovician carbonate reservoirs. Studies have been undertaken to explain the origin and geochemical characteristics of the diagenetic fluid present during this hydrothermal event although there is no consensus on it. We present a genetic model resulting from the study of δ¹³C, δ¹⁸O, δ³⁴S, and ⁸⁷Sr/⁸⁶Sr isotope values and fluid inclusions (FIs) from fracture‐ and vug‐filling calcite, saddle dolomite, fluorite, barite, quartz, and anhydrite from Ordovician outcrops in northwest (NW) Tarim Basin and subsurface cores in Central Tarim Basin. The presence of hydrothermal fluid was confirmed by minerals with fluid inclusion homogenization temperatures being >10°C higher than the paleo‐formation burial temperatures both in the NW Tarim and in the Central Tarim areas. The mixing of hot (>200°C), high‐salinity (>24 wt% NaCl), ⁸⁷Sr‐rich (up to 0.7104) hydrothermal fluid with cool (60–100°C), low‐salinity (0 to 3.5 wt% NaCl), also ⁸⁷Sr‐rich (up to 0.7010) meteoric water in the Ordovician unit was supported by the salinity of fluid inclusions, and δ¹³C, δ¹⁸O, and ⁸⁷Sr/⁸⁶Sr isotopic values of the diagenetic minerals. Up‐migrated hydrothermal fluids from the deeper Cambrian strata may have contributed to the hot brine with high sulfate concentrations which promoted thermochemical sulfate reduction (TSR) in the Ordovician, resulting in the formation of ¹²C‐rich (δ¹³C as low as ?13.8‰) calcite and ³⁴S‐rich (δ³⁴S values from 21.4‰ to 29.7‰) H₂S, pyrite, and elemental sulfur. Hydrothermal fluid mixing with fresh water in Ordovician strata in Tarim Basin was facilitated by deep‐seated faults and up‐reaching faults due to the pervasive Permian magmatic activity. Collectively, fluid mixing, hydrothermal dolomitization, TSR, and faulting may have locally dissolved the host carbonates and increased the reservoir porosity and permeability, which has significant implications for hydrocarbon exploration.     

Infiltration of basinal fluids into high-grade basement, South Norway: sources and behaviour of waters and brines

Quartz veins hosted by the high‐grade crystalline rocks of the Modum complex, Southern Norway, formed when basinal fluids from an overlying Palaeozoic foreland basin infiltrated the basement at temperatures of c. 220°C (higher in the southernmost part of the area). This infiltration resulted in the formation of veins containing both two‐phase and halite‐bearing aqueous fluid inclusions, sometimes with bitumen and hydrocarbon inclusions. Microthermometric results demonstrate a very wide range of salinities of aqueous fluids preserved in these veins, ranging from c. 0 to 40 wt% NaCl equivalent. The range in homogenization temperatures is also very large (99–322°C for the entire dataset) and shows little or no correlation with salinity. A combination of aqueous fluid microthermometry, halogen geochemistry and oxygen isotope studies suggest that fluids from a range of separate aquifers were responsible for the quartz growth, but all have chemistries comparable to sedimentary formation waters. The bulk of the quartz grew from relatively low δ¹⁸O fluids derived directly from the basin or equilibrated in the upper part of the basement (T < 200°C). Nevertheless, some fluids acquired higher salinities due to deep wall‐rock hydration reactions leading to salt saturation at high temperatures (>300°C). The range in fluid inclusion homogenization temperatures and densities, combined with estimates of the ambient temperature of the basement rocks suggests that at different times veins acted as conduits for influx of both hotter and colder fluids, as well as experiencing fluctuations in fluid pressure. This is interpreted to reflect episodic flow linked to seismicity, with hotter dry basement rocks acting as a sink for cooler fluids from the overlying basin, while detailed flow paths reflected local effects of opening and closing of individual fractures as well as reaction with wall rocks. Thermal considerations suggest that the duration of some flow events was very short, possibly in the order of days. As a result of the complex pattern of fracturing and flow in the Modum basement, it was possible for shallow fluids to penetrate basement rocks at significantly higher temperatures, and this demonstrates the potential for hydrolytic weakening of continental crust by sedimentary fluids.     

From deep to shallow fluid reservoirs: evolution of fluid sources during exhumation of the Sierra Almagrera,Betic Cordillera,Spain

The combination of structural, geochemical and palaeotopographic data proves to be an efficient tool to understand fluid transfers in the crust. This study discriminates shallow and deep fluid reservoirs on both sides of the brittle–ductile transition under an extensional regime and points out the role of major transcurrent fault activity in this palaeohydrogeological setting. Palaeofluids trapped in quartz and siderite–barite veins record the transfer of fluids and metal solute species during the Neogene exhumation of the Sierra Almagrera metamorphic belt. Ductile then brittle–ductile extensional quartz veins formed from a deep fluid reservoir, trapping metamorphic secondary brines containing low‐density volatile phases derived from the dissolution of Triassic evaporites. During exhumation, low‐salinity fluids percolated within the brittle domain, as shown by transgranular fluid inclusion planes affecting previous veins. These observations indicate the opening of the system during Serravalian to early Tortonian times and provide evidence for the penetration of surficial fluids of meteoric or basinal origin into the upper part of the brittle–ductile transition. During exhumation, synsedimentary transcurrent tectonic processes occurred from late Tortonian times onwards, while marine conditions prevailed at the Earth's surface. At depth in the brittle domain, quartz veins associated with haematite record a return to high‐salinity fluid circulation suggesting an upward transfer fed from a lower reservoir. During the Messinian, ongoing activity of the trans‐Alboran tectono‐volcanic trend led to the formation of ore deposits. Reducing fluids caused the formation of siderite and pyrite ores. The subsequent formation of galena and barite may be related to an increase of temperature. The high salinity and Cl/Br ratio of the fluids suggest another source of secondary brine derived from dissolved Messinian evaporites, as corroborated by the δ³⁴S signature of barite. These evaporites preceded the main sea‐level drop related to the peak of the salinity crisis (5.60–5.46 Ma).     

Sources and composition of fluids associated with fluorite deposits of Asturias (N Spain)

The fluorite deposits of Asturias (northern Iberian Peninsula) are hosted by rocks of Permo‐Triassic and Palaeozoic age. Fluid inclusions in ore and gangue minerals show homogenization temperatures from 80 to 170°C and the presence of two types of fluids: an H₂O–NaCl low‐salinity fluid (<8 eq. wt% NaCl) and an H₂O–NaCl–CaCl₂ fluid (7–13 wt% NaCl and 11–14 wt% CaCl₂). The low salinity and the Cl/Br and Na/Br ratios (Cl/Br_molar 100–700 and Na/Br_molar 20–700) are consistent with an evaporated sea water origin of this fluid. The other end‐member of the mixture was highly saline brine with high Cl/Br and Na/Br ratios (Cl/Br_molar 700–13 000 and Na/Br_molar 700–11 000) generated after dissolution of Triassic age evaporites. LA‐ICP‐MS analyses of fluid inclusions in fluorite reveal higher Zn, Pb and Ba contents in the high‐salinity fluids (160–500, 90–170, 320–480 p.p.m. respectively) than in the low‐salinity fluid (75–230, 25–150 and 100–300 p.p.m. respectively). The metal content of the fluids appears to decrease from E to W, from Berbes to La Collada and to Villabona. The source of F is probably related to leaching of volcanic rocks of Permian age. Brines circulated along faults into the Palaeozoic basement. Evaporated sea water was present in permeable rocks and faults along or above the unconformity between the Permo‐Triassic sediments and the Palaeozoic basement. Mineralization formed when the deep brines mixed with the surficial fluids in carbonates, breccias and fractures resulting in the formation of veins and stratabound bodies of fluorite, barite, calcite, dolomite and quartz and minor amounts of sulphides. Fluid movement and mineralization occurred between Late Triassic and Late Jurassic times, probably associated with rifting events related to the opening of the Atlantic Ocean. This model is also consistent with the geodynamic setting of other fluorite‐rich districts in Europe.     

Precipitation of lead–zinc ores in the Mississippi Valley‐type deposit at Trèves,Cévennes region of southern France

The Trèves zinc–lead deposit is one of several Mississippi Valley‐type (MVT) deposits in the Cévennes region of southern France. Fluid inclusion studies show that the ore was deposited at temperatures between approximately 80 and 150°C from a brine that derived its salinity mainly from the evaporation of seawater past halite saturation. Lead isotope studies suggest that the metals were extracted from local basement rocks. Sulfur isotope data and studies of organic matter indicate that the reduced sulfur in the ores was derived from the reduction of Mesozoic marine sulfate by thermochemical sulfate reduction or bacterially mediated processes at a different time or place from ore deposition. The large range of δ³⁴S values determined for the minerals in the deposit (12.2–19.2‰ for barite, 3.8–13.8‰ for sphalerite and galena, and 8.7 to ?21.2‰ for pyrite), are best explained by the mixing of fluids containing different sources of sulfur. Geochemical reaction path calculations, based on quantitative fluid inclusion data and constrained by field observations, were used to evaluate possible precipitation mechanisms. The most important precipitation mechanism was probably the mixing of fluids containing different metal and reduced sulfur contents. Cooling, dilution, and changes in pH of the ore fluid probably played a minor role in the precipitation of ores. The optimum results that produced the most metal sulfide deposition with the least amount of fluid was the mixing of a fluid containing low amounts of reduced sulfur with a sulfur‐rich, metal poor fluid. In this scenario, large amounts of sphalerite and galena are precipitated, together with smaller quantities of pyrite precipitated and dolomite dissolved. The relative amounts of metal precipitated and dolomite dissolved in this scenario agree with field observations that show only minor dolomite dissolution during ore deposition. The modeling results demonstrate the important control of the reduced sulfur concentration on the Zn and Pb transport capacity of the ore fluid and the volumes of fluid required to form the deposit. The studies of the Trèves ores provide insights into the ore‐forming processes of a typical MVT deposit in the Cévennes region. However, the extent to which these processes can be extrapolated to other MVT deposits in the Cévennes region is problematic. Nevertheless, the evidence for the extensive migration of fluids in the basement and sedimentary cover rocks in the Cévennes region suggests that the ore forming processes for the Trèves deposit must be considered equally viable possibilities for the numerous fault‐controlled and mineralogically similar MVT deposits in the Cévennes region.     

Fluid inclusion and stable isotope constraints on the genesis of the Jian copper deposit,Sanandaj–Sirjan metamorphic zone,Iran

The Jian copper deposit, located on the eastern edge of the Sanandaj–Sirjan metamorphic zone, southwest of Iran, is contained within the Surian Permo‐Triassic volcano‐sedimentary complex. Retrograde metamorphism resulted in three stages of mineralization (quartz ± sulfide veins) during exhumation of the Surian metamorphic complex (Middle Jurassic time; 159–167 Ma), and after the peak of the metamorphism (Middle to Late Triassic time; approximately 187 Ma). The early stage of mineralization (stage 1) is related to a homogeneous H₂O–CO₂ (XCO₂ > 0.1) fluid characterized by moderate salinity (<10 wt.% NaCl equivalent) at high temperature and pressure (>370°C, >3 kbar). Early quartz was followed by small amounts of disseminated fine‐grained pyrite and chalcopyrite. Most of the main‐ore‐stage (stage 2) minerals, including chalcopyrite, pyrite and minor sphalerite, pyrrhotite, and galena, precipitated from an aqueous‐carbonic fluid (8–18 wt.% NaCl equivalent) at temperatures ranging between 241 and 388°C during fluid unmixing process (CO₂ effervescence). Fluid unmixing in the primary carbonaceous fluid at pressures of 1.5–3 kbar produced a high XCO₂ (>0.05) and a low XCO₂ (<0.01) aqueous fluid in ore‐bearing quartz veins. Oxygen and hydrogen isotope compositions suggest mineralization by fluids derived from metamorphic dehydration (δ¹⁸O_fluid = +7.6 to +10.7‰ and δD = ?33.1 to ?38.5‰) during stage 2. The late stage (stage 3) is related to a distinct low salinity (1.5–8 wt.% NaCl equivalent) and temperatures of (120–230°C) aqueous fluid at pressures below 1.5 kbar and the deposition of post‐ore barren quartz veins. These fluids probably derived from meteoric waters, which circulated through the metamorphic pile at sufficiently high temperatures and acquire the characteristics of metamorphic fluids (δ¹⁸O_fluid = +4.7 to +5.1‰ and δD = ?52.3 to ?53.9‰) during waning stages of the postearly Cimmerian orogeny in Surian complex. The sulfide‐bearing quartz veins are interpreted as a small‐scale example of redistribution of mineral deposits by metamorphic fluids. This study suggests that mineralization at the Jian deposit is metamorphogenic in style, probably related to a deep‐seated mesothermal system.     

Geological setting, nature of ore fluids and sulphur isotope geochemistry of the Fu Ning Carlin-type gold deposits, Yunnan Province, China

Carlin‐type gold deposits in southern China are present in Palaeozoic to Mesozoic siliciclastic and carbonate rocks. The border region of Yunnan, Guizhou and Guangxi Provinces contains gold deposits on the south‐western margin of the Pre‐Cambrian South China Craton in south‐eastern Yunnan Province. The Fu Ning gold deposits host epigenetic, micron‐sized disseminated gold in: (i) Middle Devonian (D₁p) black carbonaceous mudstone at the Kuzhubao gold deposit and (ii) fault breccia zones at the contact between Triassic gabbro (β ) and the Devonian mudstone (D₁p) at the Bashishan gold deposit. The deposits are associated with zones of intense deformation with enhanced permeability and porosity that focused hydrothermal fluid flow, especially where low‐angle N‐S striking thrust faults are cut by NW striking strike‐slip and/or NE striking normal faults. Major sulphide ore minerals in the Fu Ning gold deposits are pyrite, arsenopyrite, arsenic‐rich pyrite, stibnite and minor iron‐poor sphalerite. Gangue minerals are quartz, sericite, calcite, ankerite and chlorite. Hypogene ore grades range from 1 to 7 g t^?1 Au and up to 18 g t^?1 Au at the Kuzhubao gold deposit and are generally less than 3 g t^?1 Au at the Bashishan gold deposit. Sub‐microscopic gold mineralization is associated with finely disseminated arsenic‐rich pyrite in the Stage III mineral assemblage. Two types of primary fluid inclusions have been recorded: Type I liquid–vapour inclusions with moderate‐to‐high liquid/vapour ratios, and Type II inclusions containing moderate liquid/vapour ratios with CO₂ as determined from laser Raman analysis. Temperature of homogenization (T_h) data collected from these primary fluid inclusions in gold‐ore Stage III quartz ranged from 180 to 275°C at the Kuzhubao gold deposit and 210 to 330°C at the Bashishan gold deposit. Salinity results indicate that there were possibly two fluids present during gold deposition, including: (i) an early fluid with 0.8–6.5 wt.% NaCl equivalent, similar to salinity in shear‐zone‐hosted gold deposits with metamorphic derived fluids; and (ii) a late fluid with 11.8–13.4 wt.% NaCl equivalent, indicating possible derivation from connate waters and/or brine sources. CO₂ and trace CH₄ were only detected by laser Raman spectrometry in gold‐ore‐stage primary fluid inclusions. Results of sulphur isotope studies showed that δ³⁴S values for pyrite and arsenopyrite associated with gold‐ore mineralization during Stage III at the Kuzhubao and Bashishan gold deposits are isotopically similar and moderately heavy with a range from +9 to +15 per mil, and also fall into the range of δ³⁴S values reported for Carlin‐type gold deposits. Sulphur isotopes suggest that the Fu Ning gold deposits were formed from connate waters and/or basinal brines. Fluid geochemistry data from the Fu Ning gold deposits suggest a Carlin‐type genetic model, involving fluid mixing between: (i) deep CO₂‐rich metamorphic fluids, (ii) moderately saline, reduced connate waters and/or basinal brines; and (iii) evolved meteoric waters.     

Mobilization of ore fluids during Alpine metamorphism: evidence from hydrothermal veins in the Variscan basement of Western Carpathians,Slovakia

Hydrothermal polymetallic veins of the Gemeric unit of the Western Carpathians are oriented coherently with the foliation of their low‐grade Variscan basement host. Early siderite precipitated from homogeneous NaCl‐KCl‐CaCl₂‐H₂O brines with minor CO₂, while immiscible gas–brine mixtures are indicative of the superimposed barite, quartz–tourmaline and quartz–sulphide stages. The high‐salinity aqueous fluid (18–35 wt%) found in all mineralization stages corresponds to formation water modified by interaction with crystalline basement rocks at temperatures between 140 and 300°C. High brominity (around 1000 ppm in average) resulted from evaporation and anhydrite precipitation in a Permo‐Triassic marine basin, and from secondary enrichment by dissolution of organic matter in the marine sediments at diagenetic temperatures. Sulphate depletion reflects thermogenic reduction during infiltration of the formation waters into the Variscan crystalline basement. Crystallization temperatures of the siderite fill (140–300°C) and oxygen isotope ratios of the parental fluids (4–10‰) increase towards the centre of the Gemeric cleavage fan, probably as a consequence of decreasing water/rock ratios in rock‐buffered hydrothermal systems operating during the initial stages of vein evolution. In contrast, buoyant gas–water mixtures, variable salinities and strongly fluctuating P–T parameters in the successive mineralization stages reflect transition from a closed to an open hydrothermal system and mixing of fluids from various sources. Depths of burial were 6–14 km (1.7–4.4 kbar, in a predominantly lithostatic fluid regime) during the siderite and barite sub‐stages of the north‐Gemeric veins, and up to 16 km (1.6–4.5 kbar, in a hydrostatic to lithostatic fluid regime) in the quartz–tourmaline stage of the south‐Gemeric veins. The fluid pressure decreased down to approximately 0.6 kbar during crystallization of sulphides. U‐Pb‐Th, ⁴⁰Ar/³⁹Ar and K/Ar geochronology applied to hydrothermal muscovite–phengite and monazite, as well as cleavage phyllosilicates in the adjacent basement rocks and deformed Permian conglomerates corroborated the opening of hydrothermal veins during Lower Cretaceous thrusting and their rejuvenation during Late Cretaceous sinistral transpressive shearing and extension.     

The mechanism of fluid infiltration in peridotites at Almklovdalen, western Norway

A major Alpine‐type peridotite located at Almklovdalen in the Western Gneiss Region of Norway was infiltrated by aqueous fluids at several stages during late Caledonian uplift and retrogressive metamorphism. Following peak metamorphic conditions in the garnet–peridotite stability field, the peridotite experienced pervasive fluid infiltration and retrogression in the chlorite–peridotite stability field. Subsequently, the peridotite was infiltrated locally by nonreactive fluids along fracture networks forming pipe‐like structures, typically on the order of 10 m wide. Fluid migration away from the fractures into the initially impermeable peridotite matrix was facilitated by pervasive dilation of grain boundaries and the formation of intragranular hydrofractures. Microstructural observations of serpentine occupying the originally fluid‐filled inclusion space indicate that the pervasively infiltrating fluid was characterized by a high dihedral angle (θ > 60°) and ‘curled up’ into discontinuous channels and fluid inclusion arrays following the infiltration event. Re‐equilibration of the fluid phase topology took place by growth and dissolution processes driven by the excess surface energy represented by the ‘forcefully’ introduced external fluid. Pervasive fluid introduction into the peridotite reduced local effective stresses, increased the effective grain boundary diffusion rates and caused extensive recrystallization and some grain coarsening of the infiltrated volumes. Grain boundary migration associated with this recrystallization swept off abundant intragranular fluid inclusions in the original chlorite peridotite, leading to a significant colour change of the rock. This colour change defines a relatively sharp front typically located 1–20 cm away from the fractures where the nonreactive fluids originally entered the peridotite. Our observations demonstrate how crustal rocks may be pervasively infiltrated by fluids with high dihedral angles (θ > 60°) and emphasize the coupling between hydrofracturing and textural equilibration of the grain boundary networks and the fluid phase topology.     

Re‐equilibration of fluid inclusions in diagenetic‐anchizonal rocks of the Ciñera‐Matallana coal basin (NW Spain)

Thermally re‐equilibrated fluid inclusions are reported in natural fissure quartz (qtz1) from polymineralic veins in the diagenetic‐anchizonal clastic sedimentary rocks of the Ciñera‐Matallana coal basin (Variscan, NW Spain). Euhedral quartz formed during early fissure opening from an immiscible fluid mixture composed of a low salinity aqueous solution and a CH₄‐rich vapour phase, at temperatures of about 110–120°C and pressures ranging from 15 to 56 MPa. Five textural types of re‐equilibration are recognised in progressive order of inclusion modification: scalloped, hairy, annular‐ring shaped, haloes and decrepitation clusters. These textures resulted from a combination of brittle fracturing and dissolution and re‐precipitation of quartz, with preferential loss of water. The thermal peak was short‐lived, but was high enough to induce extensive decrepitation of fluid inclusions in vein quartz throughout the entire basin. Enhanced temperatures can be related to the intrusion of diorites in the basin. Careful analysis of textural features in fluid inclusions from diagenetic and very low‐grade metamorphism environments constitutes a useful tool for recording basin thermal history.     

Fracture mineralization and fluid flow evolution: an example from Ordovician–Devonian carbonates,southwestern Ontario,Canada

Petrography, geochemistry (stable and radiogenic isotopes), and fluid inclusion microthermometry of matrix dolomite, fracture‐filling calcite, and saddle dolomite in Ordovician to Devonian carbonates from southwestern Ontario, Canada, provide useful insights into fluid flow evolution during diagenesis. The calculated δ¹⁸O_fluid, ΣREE, and REE_SN patterns of matrix and saddle dolomite suggest diverse fluids were involved in dolomitization and/or recrystallization of dolomite. The ⁸⁷Sr/⁸⁶Sr ratios of dolomite of each succession vary from values in the range of coeval seawater to values more radiogenic than corresponding seawater, which indicate diagenetic fluids were influenced by significant water/rock interaction. High salinities (22.4–26.3 wt. % NaCl + CaCl₂) of Silurian and Ordovician dolomite–hosted fluid inclusions indicate involvement of saline waters from dissolution of Silurian evaporites. High fluid inclusion homogenization temperatures (>100°C) in all samples from Devonian to Ordovician show temperatures higher than maximum burial (60–90°C) of their host strata and suggest involvement of hydrothermal fluids in precipitation and/or recrystallization of dolomite. A thermal anomaly over the mid‐continent rift during Devonian to Mississippian time likely was the source of excess heat in the basin. Thermal buoyancy resulting from this anomaly was the driving force for migration of hydrothermal fluids through regional aquifers from the center of the Michigan Basin toward its margin. The decreasing trend of homogenization temperatures from the basin center toward its margin further supports the interpreted migration of hydrothermal fluids from the basin center toward its margin. Hydrocarbon‐bearing fluid inclusions in late‐stage Devonian to Ordovician calcite cements with high homogenization temperatures (>80°C) and their ¹³C‐depleted values (approaching ?32‰ PDB) indicate the close relationship between hydrothermal fluids and hydrocarbon migration.     

Metamorphic and basin fluids in quartz–carbonate–sulphide veins in the SW Scottish Highlands: a stable isotope and fluid inclusion study

Metalliferous (Fe–Cu–Pb–Zn) quartz–carbonate–sulphide veins cut greenschist to epidote–amphibolite facies metamorphic rocks of the Dalradian, SW Scottish Highlands, with NE–SW to NW–SE trends, approximately parallel or perpendicular to regional structures. Early quartz was followed by pyrite, chalcopyrite, sphalerite, galena, barite, late dolomite–ankerite and clays. Both quartz–sulphide and carbonate vein mineralisation is associated with brecciation, indicating rapid release of fluid overpressure and hydraulic fracturing. Two distinct mineralising fluids were identified from fluid inclusion and stable isotope studies. High temperature (>350°C) quartz‐precipitating fluids were moderately saline (4.0–12.7 wt.% NaCl equivalent) with low (approximately 0.05). Quartz δ¹⁸O (+11.7 to +16.5‰) and sulphide δ³⁴S (?13.6 to ?1.1‰) indicate isotopic equilibrium with host metasediments (rock buffering) and a local metasedimentary source of sulphur. Later, low‐temperature (T_H = 120–200°C) fluids, probably associated with secondary carbonate, barite and clay formation, were also moderately saline (3.8–9.1 wt.% NaCl equivalent), but were strongly enriched in ¹⁸O relative to host Dalradian lithologies, as indicated by secondary dolomite–ankerite (δ¹⁸O = +17.0 to +29.0‰, δ¹³C = ?1.0 to ?3.0‰). Compositions of carbonate–forming fluids were externally buffered. The veins record the fluid–rock interaction history of metamorphic host rocks during cooling, uplift and later extension. Early vein quartz precipitated under retrograde greenschist facies conditions from fluids probably derived by syn‐metamorphic dehydration of deeper, higher‐grade rocks during uplift and cooling of the Caledonian metamorphic complex. Veins are similar to those of mesothermal veins in younger Phanerozoic metamorphic belts, but are rare in the Scottish Dalradian. Early quartz veins were reactivated by deep penetration of low‐temperature basin fluids that precipitated carbonate and clays in veins and adjacent Dalradian metasediments throughout the SW Highlands, probably in the Permo‐Carboniferous. This event is consistent with paragenetically ambiguous barite with δ³⁴S characteristic of late Palaeozoic basinal brines.     

Pyrophyllite formation in the thermal aureole of a hydrothermal system in the Lower Saxony Basin,Germany

A combined clay mineralogical, fluid inclusion, and K‐Ar study of Upper Jurassic metasediments at the Gehn (Lower Saxony Basin, Germany) provides evidence for a transient hydrothermal event during Upper Cretaceous basin inversion centered on a prominent gravimetric anomaly. Kaolinite and smectite in Oxfordian pelitic parent rocks that cap a deltaic sandstone unit were locally transformed into pyrophyllite, 2M₁ illite, R3 illite–smectite, chlorite, and berthierine at the Ueffeln quarry. The pyrophyllite‐bearing metapelites lack bedding‐parallel preferred orientation of sheet silicates and experienced peak temperatures of about 260–270°C consistent with microthermometric data on quartz veins in the underlying silicified sandstones. The presence of expandable layers in illite–smectite and high Kübler Index values indicate that the thermal event was rather short‐lived. K‐Ar dating of the <0.2 μm fraction of the pyrophyllite‐bearing Ueffeln metapelite yields a maximum illitization age of 117 ± 2 Ma. Lower trapping temperatures of aqueous fluid inclusions in quartz veins and the absence of pyrophyllite in metapelites of the Frettberg quarry in a distance of about 2.5 km from the Ueffeln quarry infer maximum paleotemperatures of only 220°C. The highly localized thermal anomaly at Ueffeln suggests fault‐controlled fluid migration and heat transfer that provided a thermal aureole for pyrophyllite formation in the metapelites rather than metamorphism due to deep burial. A pH neutral hydrothermal fluid that formed by devolatilization reactions or less likely by mixing of meteoric and marine waters that interacted at depth with shales is indicated by the low salinity (3–5 wt. % NaCl equiv.) of aqueous inclusions, their coexistence with methane–carbon dioxide‐dominated gas inclusions as well as carbon, hydrogen, and oxygen isotope data. The upwelling zone of hydrothermal fluids and the thermal maximum is centered on a gravimetric anomaly interpreted as an igneous intrusion (‘Bramsche Massif’) providing the heat source for the intrabasinal hydrothermal system.     

Origin of palaeo‐waters in the Ordovician carbonates in Tahe oilfield,Tarim Basin: constraints from fluid inclusions and Sr,C and O isotopes

Petrographic features, isotopes, and trace elements were determined, and fluid inclusions were analyzed on fracture‐filling, karst‐filling and interparticle calcite cement from the Ordovician carbonates in Tahe oilfield, Tarim basin, NW China. The aim was to assess the origin and evolution of palaeo‐waters in the carbonates. The initial water was seawater diluted by meteoric water, as indicated by bright cathodoluminescence (CL) in low‐temperature calcite. The palaeoseawater was further buried to temperatures from 57 to 110°C, nonluminescent calcite precipitated during the Silurian to middle Devonian. Infiltration of meteoric water of late Devonian age into the carbonate rocks was recorded in the first generation of fracture‐ and karst‐filling dull red CL calcite with temperatures from <50°C to 83°C, low salinities (<9.0 wt%), high Mn contents and high ⁸⁶Sr/⁸⁷Sr ratios from 0.7090 to 0.7099. During the early Permian, ⁸⁷Sr‐rich hydrothermal water may have entered the carbonate rocks, from which precipitated a second generation of fracture‐filling and interparticle calcite and barite cements with salinities greater than 22.4 wt%, and temperatures from 120°C to 180°C. The hydrothermal water may have collected isotopically light CO₂ (possibly of TSR‐origin) during upward migration, resulting in hydrothermal calcite and the present‐day oilfield water having δ¹³C values from ?4.3 to ?13.8‰ and showing negative relationships of ⁸⁷Sr/⁸⁶Sr ratios to δ¹³C and δ¹⁸O values. However, higher temperatures (up to 187°C) and much lower salinities (down to 0.5 wt%) measured from some karst‐filling, giant, nonluminescent calcite crystals may suggest that hydrothermal water was deeply recycled, reduced (Fe‐bearing) meteoric water heated in deeper strata, or water generated from TSR during hydrothermal water activity. Mixing of hydrothermal and local basinal water (or diagenetically altered connate water) with meteoric waters of late Permian age and/or later may have resulted in large variations in salinity of the present oilfield waters with the lowest salinity formation waters in the palaeohighs.     

Syntectonic infiltration by meteoric waters along the Sevier thrust front,southwest Montana

Structural, petrographic, and isotopic data for calcite veins and carbonate host‐rocks from the Sevier thrust front of SW Montana record syntectonic infiltration by H₂O‐rich fluids with meteoric oxygen isotope compositions. Multiple generations of calcite veins record protracted fluid flow associated with regional Cretaceous contraction and subsequent Eocene extension. Vein mineralization occurred during single and multiple mineralization events, at times under elevated fluid pressures. Low salinity (T_m = ?0.6°C to +3.6°C, as NaCl equivalent salinities) and low temperature (estimated 50–80°C for Cretaceous veins, 60–80°C for Eocene veins) fluids interacted with wall‐rock carbonates at shallow depths (3–4 km in the Cretaceous, 2–3 km in the Eocene) during deformation. Shear and extensional veins of all ages show significant intra‐ and inter‐vein variation in δ¹⁸O and δ¹³C. Carbonate host‐rocks have a mean δ¹⁸O_V‐SMOW value of +22.2 ± 3‰ (1σ), and both the Cretaceous veins and Eocene veins have δ¹⁸O ranging from values similar to those of the host‐rocks to as low as +5 to +6‰. The variation in vein δ¹³C_V‐PDB of ?1 to approximately +6‰ is attributed to original stratigraphic variation and C isotope exchange with hydrocarbons. Using the estimated temperature ranges for vein formation, fluid (as H₂O) δ¹⁸O calculated from Cretaceous vein compositions for the Tendoy and Four Eyes Canyon thrust sheets are ?18.5 to ?12.5‰. For the Eocene veins within the Four Eyes Canyon thrust sheet, calculated H₂O δ¹⁸O values are ?16.3 to ?13.5‰. Fluid–rock exchange was localized along fractures and was likely coincident with hydrocarbon migration. Paleotemperature determinations and stable isotope data for veins are consistent with the infiltration of the foreland thrust sheets by meteoric waters, throughout both Sevier orogenesis and subsequent orogenic collapse. The cessation of the Sevier orogeny was coincident with an evolving paleogeographic landscape associated with the retreat of the Western Interior Seaway and the emergence of the thrust front and foreland basin. Meteoric waters penetrated the foreland carbonate thrust sheets of the Sevier orogeny utilizing an evolving mesoscopic fracture network, which was kinematically related to regional thrust structures. The uncertainty in the temperature estimates for the Cretaceous and Eocene vein formation prevents a more detailed assessment of the temporal evolution in meteoric water δ¹⁸O related to changing paleogeography. Meteoric water‐influenced δ¹⁸O values calculated here for Cretaceous to Eocene vein‐forming fluids are similar to those previously proposed for surface waters in the Eocene, and those observed for modern‐day precipitation, in this part of the Idaho‐Montana thrust belt.     

Br/Cl signature of hydrothermal fluids: liquid–vapour fractionation of bromine revisited

Br/Cl ratios of hydrothermal fluids are widely used as geochemical tracers in marine hydrothermal systems to prove fluid phase separation processes. However, previous results of the liquid–vapour fractionation of bromine are ambiguous. Here we report new experimental results of the liquid–vapour fractionation of bromine in the system H₂O–NaCl–NaBr at 380–450°C and 22.9–41.7 MPa. Our data indicate that bromine is generally more enriched than chlorine in the liquid phase. Calculated exchange coefficients K_D(Br‐Cl)^{liquid‐vapour} for the reaction Br^vapour + Cl^liquid = Br^liquid + Cl^vapour are between 0.94 ± 0.08 and 1.66 ± 0.14 within the investigated P–T range. They correlate positively with D_Cl^{liquid‐vapour} and suggest increasing bromine–chlorine fractionation with increasing opening of the liquid–vapour solvus, i.e. increasing distance to the critical curve in the H₂O–NaCl system. An empirical fit of the form K_D(Br‐Cl)^{liquid‐vapour} = a*ln[b*(D_Cl^{liquid‐vapour}?1) + e^1/a] yields a = 0.349 and b = 1.697. Based on this empirical fit and the well‐constrained phase relations in the H₂O–NaCl system we calculated the effect of fluid phase separation on the Br/Cl signature of a hydrothermal fluid with initial seawater composition for closed and open adiabatic ascents along the 4.5 and 4.8 J g^?1 K^?1 isentropes. The calculations indicate that fluid phase separation can significantly alter the Br/Cl ratio in hydrothermal fluids. The predicted Br/Cl evolutions are in accord with the Br/Cl signatures in low‐salinity vent fluids from the 9 to 10°N East Pacific Rise.     

Comparing closed system, flow-through and fluid infiltration geochemical modelling: examples from K-alteration in the Ernest Henry Fe-oxide–Cu–Au system

Potassic alteration of rocks adjacent to, and within the Ernest Henry Fe‐oxide–Cu–Au deposit is used here as a test case to investigate fluid–rock interactions using various equilibrium dynamic geochemical modelling approaches available in the HCh code. Reaction of a simple K–Fe–(Na,Ca) brine (constrained by published fluid inclusion analysis) with an albite‐bearing felsic volcanic rock, resulted in predicted assemblages defined by (i) K‐feldspar–muscovite–magnetite, (ii) biotite–K‐feldspar–magnetite, (iii) biotite–quartz–albite and (iv) albite–biotite–actinolite–pyroxene with increasing rock buffering (decreasing log w/r). Models for isothermal–isobaric conditions (450°C and 2500 bars) were compared with models run over a T–P gradient (450 to 200°C and 2500 to 500 bars). Three principal equilibrium dynamic simulation methods have been used: (i) static closed system, where individual steps are independent of all others, (ii) flow‐through and flush, where a part of the result is passed as input further along the flow line, and (iii) fluid infiltration models that simulate fluid moving through a rock column. Each type is best suited to a specific geological fluid–rock scenario, with increasing complexity, computation requirements and approximation to different parts of the natural system. Static closed system models can be used to quickly ascertain the broad alteration assemblages related to changes in the water/rock ratio, while flow‐through models are better suited to simulating outflow of reacted fluid into fresh rock. The fluid infiltration model can be used to simulate spatially controlled fluid metasomatism of rock, and we show that, given assumptions of porosity relationships and spatial dimensions, this model is a first‐order approximation to full reactive transport, without requiring significant computational time. This work presents an overview of the current state of equilibrium dynamic modelling technology using the HCh code with a view to applying these techniques to predictive modelling in exploration for mineral deposits. Application to the Ernest Henry Fe‐oxide–Cu–Au deposit demonstrates that isothermal fluid–rock reaction can account for some of the alteration zonation around the deposit.     

Fluid flow and the Heart Mountain fault: a stable isotopic, fluid inclusion, and geochronologic study

Numerous studies have proposed that movement along the 3400‐km² low‐angle (<3°) Heart Mountain detachment fault of north‐western Wyoming and south‐western Montana was facilitated by the presence of lubricating fluids. A recent stable isotope study suggested that the fluids along the Heart Mountain fault originated from large hydrothermal systems associated with Eocene intrusive centers. Herein, we present results from a combined stable isotope, fluid inclusion, and ⁴⁰Ar/³⁹Ar geochronology study of the relationship between shallow crustal fluids from Eocene intrusive centers in the New World Mining district and fluids associated with the Heart Mountain fault. Our results suggest that: (i) Eocene intrusive bodies within the New World Mining District focused hydrothermal fluids along specific units and structures from the ore deposit centers along the Heart Mountain fault detachment surface; (ii) hydrothermal waters were focused along the Heart Mountain fault from the breakaway region near Silvergate, Montana toward Heart Mountain in Cody, Wyoming; and (iii) hydrothermal activity along the Heart Mountain fault occurred at the same time as emplacement of the Eocene intrusives, between 50.1 and 48.1 Ma. These data, taken together, suggest that the hydrothermal activity generated by intrusion of Eocene rhyodacites and dacites provided the source of fluids found along the Heart Mountain fault plane.