Tapetum Corporis Callosi: Carpet of the Brain

The tapetum is described by Johann Christian Rell (1759–1813). It is formed primarily by decussating fibers in the splenium of the corpus callosum that arch over the atrium of the lateral ventricle and course inferiorly in the lateral wall of the posterior, and somewhat into the temporal horns, of the lateral ventricle. The term of tapetum was discussed from etymological and anatomical points of view.     

Anton Raederscheidt's distorted self-portraits and their significance for understanding balance in art

Following a right cerebral stroke, the German artist Anton Raederscheidt produced a remarkable series of self-portraits that depicted his severe visual neglect and gradual recovery. These distorted images, like those drawn by others with this disorder, inform us about lateral balance in art and why it is common in the art of cultures separated in time and space. After describing how artists in various cultures have employed lateral balance, I present Arnheim's view that this aspect of art is the result of visual forces generated by the brain. Following a brief history of visual neglect, I present evidence that this disorder provides us with clues to the origin of the visual forces responsible for lateral balance in art. The relevant brain mechanisms control exploration of visual space by integrating orienting movements with visual spatial information. The prevalence of lateral balance in art becomes understandable when we consider that these brain mechanisms evolved to promote survival in our vertebrate ancestors. I end with a speculative neurological account of the aesthetics of lateral balance--why it is pleasing and its absence is displeasing.     

Anton Raederscheidt’s Distorted Self-Portraits and Their Significance for Understanding Balance in Art

Following a right cerebral stroke, the German artist Anton Raederscheidt produced a remarkable series of self-portraits that depicted his severe visual neglect and gradual recovery. These distorted images, like those drawn by others with this disorder, inform us about lateral balance in art and why it is common in the art of cultures separated in time and space. After describing how artists in various cultures have employed lateral balance, I present Arnheim’s view that this aspect of art is the result of visual forces generated by the brain. Following a brief history of visual neglect, I present evidence that this disorder provides us with clues to the origin of the visual forces responsible for lateral balance in art. The relevant brain mechanisms control exploration of visual space by integrating orienting movements with visual spatial information. The prevalence of lateral balance in art becomes understandable when we consider that these brain mechanisms evolved to promote survival in our vertebrate ancestors. I end with a speculative neurological account of the aesthetics of lateral balance – why it is pleasing and its absence is displeasing.     

Assessment of Effects of Reductions of Lateral Stiffness along Height on Buildings Modeled as Elastic Cantilever Shear Beams

A simplified model useful for assessing economic losses due to moderate seismicity events in urban areas has been developed by studying the behavior of buildings before yielding their structural system, allowing for nonuniform stiffness along their height. In particular, buildings are modeled as cantilever shear beams with uniform mass and parabolic reduction of lateral stiffness. This particular stiffness distribution is relevant, as it could be expected to occur in buildings where earthquake action is a critical structural design criterion. The equation of motion governing the dynamic behavior of the proposed model is solved analytically, finding mode shapes in terms of first and second zero-order Legendre functions. The solution is verified by comparing it with results obtained from fine mesh finite element models. The effect of reducing the lateral stiffness is then studied in the first five modes of vibration. Results include modal periods, mode shapes, modal participation factors, and derivatives of mode shapes. In general, it is found that effects of reduction of lateral stiffness in mode shapes are moderate when the lateral stiffness in the free end is smaller than about seventy percent of the lateral stiffness at the fixed end, but become significant for larger reductions. Effects are particularly important for the derivative of the mode shapes, which could play a significant role in estimating interstory drift demands in buildings. Model usefulness is showcased by analyzing a test case where both acceleration and drift demands are assessed by considering uniform beams and beams with parabolic stiffness variation, finding notable improvements by considering the latter.     

Optimal Control of Structures under Earthquakes Including Soil-Structure Interaction

It is well known that the soil-structure interaction (SSI) changes the dynamic response of a structure supported on flexible soil. The analysis of optimally controlled SSI systems has certain difficulties due to the nature of the SSI and the optimal control problem. In this paper, a two-step iteration-based numerical algorithm is proposed to handle optimally controlled SSI systems under earthquakes. First, the optimal control forces are obtained by using a fixed-base system. Then, the optimal control forces are converted to the frequency domain by the Fourier transform technique to be used in the equations of the SSI system. The lateral displacement and the rocking of the foundation are obtained from the equations of the SSI system containing the optimal control forces in the frequency domain. The lateral displacement and rocking of the foundation are then converted to the time domain by the inverse Fourier transform technique, and the lateral accelerations and the rocking accelerations of the foundation are obtained by the forward finite difference method. During the second step, the optimal control forces are calculated again by using the lateral acceleration and the rocking acceleration of the foundation along with the earthquake ground motion. Using the method explained above, the optimal control forces obtained in the time domain are used in the equations of the soil-structure system from which the behavior of foundation and structure is obtained. In the final section of the paper, a numerical study is conducted for a controlled structure supported on flexible soil.     

Liquefaction-Induced Lateral Load on Pile in a Medium Dr Sand Layer

One-g shake-table experiments are conducted to explore the response of single piles due to liquefaction-induced lateral soil flow. The piles are embedded in saturated Medium Relative Density (Dr) sand strata 1.7–5.0 m in thickness. Peak lateral pile displacements and bending moments are recorded and analyzed by uniform and triangular pressure distributions. On this basis, the observed levels of pile bending moment upon liquefaction suggest a hydrostatic lateral pressure approximately equal to that due to the total overburden stress. Using the experimental data, comparisons with current recommendations are made, and the Showa Bridge case history is briefly assessed.     

Cyclic Response of Concrete Beams Reinforced by Plain Bars

There are many reinforced concrete structures throughout the world that have been built in the past decades that lack appropriate seismic details and reinforced by plain bars. To study the behavior of such buildings, seven beams have been tested under cyclic and monotonic load. The specimens include substandard specimens, with deficient seismic details and reinforced by plain bars, specimens designed in accordance with ACI-318-99 but reinforced by plain bars, and standard specimens reinforced by deformed bars. The tests indicate that the substandard specimens sustain relatively large slip of longitudinal bars, separation of specimen relative to foundation and sliding at large deformation phase, low initial stiffness ratio, limited lateral displacement capacity, and loss of nominal yield strength. The specimens reinforced by plain bars in accordance with ACI-318-99 perform almost similar to standard specimens with deformed bars, in terms of elastic stiffness and lateral displacement ductility; but, they sustain larger slip, and smaller yield strength. Failure of all specimens reinforced by plain bars is characterized by flexural cracks without visible shear failure. Residual shear strength of substandard specimens is modeled by dowel action of longitudinal bars to predict a lower limit for lateral strength of the specimens.     

Seismic Behavior of L-Shaped RC Squat Walls under Various Lateral Loading Directions

Considerable progress has been made on the research of non-rectangular reinforced concrete (RC) squat walls over the past decades. However, the experimental data of L-shaped RC squat walls remain limited, especially for their seismic behaviors under non-principal bending actions. This paper presents an experimental and numerical investigation on L-shaped RC squat structural walls with an emphasis on how varying the directions of lateral cyclic loading influences the seismic responses of these walls. Four L-shaped specimens are tested under lateral cyclic displacements and low levels of axial compression The variables are axial loads and lateral loading directions. The performance of specimens is discussed in terms of cracking patterns, failure mechanisms, hysteretic responses, deformation components and strain profiles. Furthermore, three-dimensional finite element models are developed to supplement the experimental results. The direction of lateral loading is found to have a significant effect on the peak shear strength of L-shaped RC squat walls.     

Quasi-Static Testing of RC Infilled Frames and Confined Stone-Concrete Bearing Walls

This article presents an experimental investigation of the seismic performance of gravity load-designed RC infilled frames and confined bearing walls of limestone masonry backed with plain concrete. Five infilled frames and two bearing walls were constructed at one-third scale and tested using reversed cyclic lateral loading and constant axial loads. Effects of openings, axial loading, and infill interface conditions were examined using quasi-static experimentation. The two structural systems exhibited similar lateral resistance and energy dissipation capacities with higher global displacement ductility for the infilled frames. Hysteretic behavior of the infilled frame models exhibited pinching of the hysteretic loops accompanied by extensive degradation of stiffness whereas loops of the bearing walls were free of pinching. Test results confirmed the beneficial effect of axial loading on lateral resistance, energy dissipation, and ductility of the bearing walls. Higher axial loading resulted in a substantial decrease in ductility with no significant effect on lateral resistance of the infilled frames. Openings within the infill panel reduced significantly the lateral resistance of infilled frames. Using dowels at the infill panel interfaces with the base block and bounding columns enhanced the maximum load-carrying capacity of infilled frames without impairing their ductility.     

Distribution of Lateral Forces in Base-Isolated Buildings Considering Isolation System Nonlinearity

The ASCE 7 equivalent lateral force method for base-isolated buildings applies a triangular distribution of forces to the superstructure. This distribution attempts to approximately account for the observed effects of isolation system nonlinearity on the superstructure response, but a more rational approximation is needed. Using nonlinear regression analysis of median response data from nonlinear response history analysis of representative systems, improved equations are developed to estimate the lateral force distribution in the superstructure. The ASCE 7 distribution, a revision considered by a SEAONC committee, and the improved distribution developed here are evaluated. Only the improved equations are accurate over many system parameters.     

Simple Models for Inelastic Seismic Analysis of Asymmetric Multistory RC Buildings

A simple stick model is presented for the inelastic seismic analysis in 3D of two-way eccentric multistory RC buildings. It has 3 DoFs per floor, point hinges at the ends of the vertical elements connecting floors, elastic story stiffness derived from the corresponding story force-interstory deformation relations of the elastic 3D structure under inverted-triangular floor loading (by torques for torsional stiffness, by horizontal forces for the lateral ones), story yield forces derived from the total resistant shear of the story vertical elements, but no coupling between lateral and torsional inelasticity. It is evaluated on the basis of comparisons of response histories of floor displacements to those from full nonlinear models in 3D of four actual buildings. Alternative locations of the story vertical element with respect to the floor mass center are examined: (a) the floor “center of twist” of the elastic 3D building under inverted-triangular floor torques; (b) the story “effective center of rigidity,” through which application of inverted triangular lateral forces does not induce twisting of floors; (c) the centroid of the secant stiffness of the story vertical members at yielding and (d) the centroid of the lateral force resistance of story vertical elements. Among alternatives (a)–(d), the floor “center of twist” provides the best agreement with floor displacement response-histories from full 3D nonlinear models. This means that the static eccentricity that matters for torsional response may be taken as that of the floor “center of twist.” The center of resistance comes up as the second-best choice.     

Hallux Valgus among an 18th Century Population of the Canary Islands

Hallux valgus is defined as the lateral deviation of the great toe. It is considered a disease mainly related to the use of boots or shoes that constrict the foot. This process usually ensues along many years and is accompanied by changes at the metatarsophalangeal joint, which serve to make the diagnosis on bare bones. Diagnostic criteria include lateral deviation of the metatarsophalangeal joint (1), lateral subluxation of the first phalanx, degenerative changes of the sesamoid articular facets, and exostosis or remodelling of the medial tuberosity. Following other authors, we have defined hallux valgus as the presence of (1) and any of the other three criteria. In a series of the 18th century burials from the church La Concepción, in Tenerife, Canary Islands, we found 35 cases of hallux valgus out of the 117 cases for which necessary data for the diagnosis could be recorded (29.91%). A significant association was found between changes in the left toe and burial site near the altar, where priests and other people of the high social status were interred. Copyright © 2012 John Wiley & Sons, Ltd.     

Cyclic Response of Non-ductile RC Frame with Steel Fibers at Beam-Column Joints and Plastic Hinge Regions

An experimental study has been conducted on a reduced-scale gravity-load designed test frame to investigate its overall performance due to the addition of steel fiber-reinforced concrete (SFRC) at the critical regions. Two geometrically similar specimens, namely, reinforced concrete (RC) and SFRC, are tested under slow-cyclic lateral loading. End-hooked steel fibers (aspect ratio = 80) of 1.0% volume fraction were used in the SFRC mix for a distance of one-and-half times the member size near the joint regions. The addition of steel fibers improved the damage tolerance, lateral load resisting capacity, lateral stiffness, ductility, and energy dissipation of the frame.     

SEISMIC REHABILITATION OF SHORT RECTANGULAR RC COLUMNS

Non-ductile response of structural elements, particularly columns, has been the cause of numerous documented failures during earthquakes. The objective of this experimental study was to evaluate the non-linear behaviour of non-ductile reinforced concrete short columns under lateral cyclic deformations and to evaluate rehabilitation schemes. Three reinforced concrete short columns were tested under cyclic lateral loads and constant axial load. The behaviour and effectiveness of different rehabilitation systems using carbon fibre reinforced polymers (CFRP) were investigated. Two different techniques to improve concrete confinement were used in the two rehabilitated specimens. It was found that it is possible to eliminate the non-ductile modes of failure of short column using anchored CFRP wraps. In addition, an analytical model to predict the confining effect and the total shear resistance of rectangular reinforced concrete columns with anchored fibre wraps was introduced. The confinement model is an extension to an available model for concrete confined by steel reinforcement. The model was used to predict the shear capacity of the tested specimens and has shown good results.     

COUPLED P-Y T-Z ANALYSIS OF SINGLE PILES IN COHESIONLESS SOIL UNDER VERTICAL AND/OR HORIZONTAL GROUND MOTION

Various approaches are currently used for the analysis of piles under vertical and lateral loading. Among these, the beam-on-a-nonlinear Winkler foundation (BNWF) approach using published P-y, T-z and Q-z curves is widely used in practice. In this approach, the P-y and T-z responses are generally uncoupled from each other. The objective of this paper is to investigate the influence that the coupling of the P-y and T-z responses has.on the cyclic and dynamic response of piles in cohesionless soil. A cyclic model is first developed and a parametric study is conducted to investigate the effect the initial confining pressure, angle of wall friction and effective vertical stiffness have on the lateral cyclic hysteretic response. A dynamic model is then developed, and used to study the response of a single pile in cohesionless soil under horizontal and/or vertical ground motion. Results from the parametric study showed that the three parameters did not have a significant influence on the lateral cyclic hysteretic response. Under horizontal and/or vertical ground motion, the horizontal ground motion was observed to dominate the inertial interaction response, and significantly affected both the horizontal and vertical displacement response, mainly due to second-order P-Δ and gapping effects.     

STATISTICAL SEISMIC VULNERABILITY ASSESSMENT OF EXISTING REINFORCED CONCRETE BUILDINGS IN TURKEY ON A REGIONAL SCALE

A statistical procedure, called discriminant analysis, is used to develop a model for the preliminary assessment of the seismic vulnerability of low- to medium-rise (2-7 storey) reinforced concrete buildings. The earthquake damage data compiled in Düzce province after the 12 November 1999 Düzce earthquake formed the damage database. Number of storeys, minimum normalised lateral stiffness index, minimum normalised lateral strength index, normalised redundancy score, soft storey index and overhang ratio are selected as the basic damage inducing variables. Two discriminant functions are derived in terms of these variables considering immediate occupancy and life safety performance levels. In the proposed preliminary seismic vulnerability assessment model, the discri-minant scores obtained from these two discriminant functions are combined in an optimal way and axe used to classify existing buildings as “safe”, “unsafe” and “requires further evaluation”. The optimality criterion imposed into the model is the minimisation of the misclassification rate of damage states causing collapse. The validity of the proposed model is checked by using the seismic damage data associated with recent earthquakes that occurred in Turkey. The consistency between the observed damage distribution and the predictions of the proposed model supports the effectiveness of the proposed model.     

Caribou metapodial shaft splinter technology

A technique for the extraction of long narrow bone splinters for the production of bone artifacts is reported. Caribou metapodial bones from the Paxson Lake site, central Alaska, were modified by striking behind the lateral and medial borders of the posterior surface using a percussion method. The resulting fragments are termed shaft splinter cores and shaft splinters. The long shaft splinters may have been used for producing a variety of bone implements.     

Effect of AAC Infill Walls on Structural System Dynamics of a Concrete Building

The effect of autoclaved aerated concrete (AAC) infill walls on the structural system dynamics of a two-story reinforced concrete building is investigated using its finite element structural model, which is calibrated to simulate the acceleration-frequency response curves from its forced vibration test. The model incorporating the AAC infill walls by equivalent diagonal struts captures the increase in lateral stiffness of the building and the torsional motions induced due to the asymmetrically placed AAC infill walls. A higher strut width coefficient than in ASCE/SEI 41-06 is recommended to model the stiffness of the AAC infill walls in the elastic range.     

Application of an Extended Bouc-Wen Model in Seismic Response Prediction of Unbonded Fiber-Reinforced Isolators

The focus of this article is on seismic-response prediction of Stable Unbonded-Fiber Reinforced Elastomeric Isolators (SU-FREIs). The lateral load-displacement of a SU-FREI can be characterized with a gradual softening that is followed by stiffening. An extended Bouc-Wen Model is developed to simulate the response behavior of SU-FREIs under seismic events. To examine the accuracy of model, the response of a base isolated structure to different input earthquakes were simulated and compared with the results of a previous shake table study. Results of this study indicate that the proposed Bouc-Wen Model is robust and reasonably accurate in seismic analysis of SU-FREIs.     

Experimental Investigation of Circular Reinforced Concrete Columns under Different Loading Histories

Three reinforced concrete (RC) circular column specimens without an effective concrete cover were tested under constant axial compressive as well as cyclic lateral loading. The seismic behavior of the specimens under different loading paths was examined with the objective of understanding the influence of displacement history sequence on the seismic behavior of the columns in near-fault earthquakes. The influence of displacement history sequence upon the hysteretic characteristics, stiffness degradation, lateral capacity, as well as energy dissipation analysis was conducted. The hoop strains of lateral reinforcement at varied column heights under cyclic loading were attained by means of 8–16 strain gauges attached along the hoops. Additionally, the characteristics of strain distribution were investigated in the transverse reinforcement. The results of strain distribution were evaluated with Mander’s confinement stress model and the distribution around the cross section. The length of the plastic hinge at the end of the specimen was evaluated by measurement as well as the inverse analysis. Finally, the deformation of the specimen, which includes the components of shear deformation, bending deformation and bonding-slip deformation, was evaluated and successfully separated.