Levallois economics: an examination of ‘waste’ production in experimentally produced Levallois reduction sequences

Mathematical modelling has suggested that Levallois core morphology represents a reduction strategy driven by economic considerations; particularly the minimization of ‘waste’ while aiming to maximize cutting edge length of flakes obtained from cores of a given size. Such models are elegant in that they facilitate formal modelling of economic considerations that potentially motivate patterns seen in prehistoric data. However, the abstract nature of such models means that they do not take full account of all the practical difficulties and material challenges involved in reproducing Levallois-style reductions in stone. In particular, such models have only examined nodule morphology in two-dimensions, and did not take account of the fact that in the case of classic (lineal) Levallois reduction, core surfaces must be re-prepared between successive stages of flake removal. Hence, the potential economic implications of these factors are currently unknown, potentially undermining the significance of models that assume specific economic conditions. Here, we undertook to examine these factors using a series of experimentally produced Levallois reduction sequences. A total of 3957 flaking events were considered in our analyses, and we used six specific measures of economy to examine Levallois reduction across successive phases. Our analyses found that key assumptions of mathematical models suggesting that Levallois core morphology was driven by economic considerations (i.e. conservation of raw material when attempting to remove flakes with long cutting edges) can be upheld under the practical challenges of replicating Levallois-style reduction in stone. In supporting the notion that Levallois reduction has advantageous economic properties, our results emphasize the importance of considering why Levallois reduction did not emerge earlier in the archaeological record, and indeed, why even during the later Pleistocene the temporal and geographic distribution of Levallois technology varies. Our results also re-emphasize the value of formally modelling lithic reduction strategies in specific economic terms.     

Presence of the African Saber-toothed FelidMegantereon whitei(Broom, 1937) (Mammalia, Carnivora, Machairodontinae) in Apollonia-1 (Mygdonia Basin, Macedonia, Greece)

We have made a multivariate morphometric study of the fossils ofMegantereonfrom the Apollonia-1 site at the Mygdonia Basin (Macedonia, Greece), using discriminant functions. Results obtained indicate that these specimens belong to the African speciesMegantereon whiteiBroom, which is also found in the Lower Pleistocene of Dmanisi (East Georgia, Caucasus) and Orce (Southern Spain). Morphofunctional studies ofM. whiteisuggest that this saber-toothed felid was an ambush predator with great killing capability in relation to its food requirements, thus leaving enough meat to be scavenged by both hyaenas and hominids.M. whiteimay have played an important ecological role making the first dispersal ofHomoto Eurasia the Lower Pleistocene possible.     

Shell-gathering from mangroves and the seasonality of the Southeast Asian Monsoon using high-resolution stable isotopic analysis of the tropical estuarine bivalve (Geloina erosa) from the Great Cave of Niah, Sarawak: methods and reconnaissance of molluscs of early Holocene and modern times

This paper describes a reconnaissance, high-resolution, study of stable isotopes (δ¹⁸O and δ¹³C) from modern shells of the estuarine bivalve Geloina erosa, and those dated to the early Holocene that were harvested by people from mangroves near the Great Cave of Niah on the north coast of Borneo. This reconnaissance study provides high-resolution palaeoclimatic-palaeohydrological information concerning early human activity in the region and the past character of the Southeast Asian Monsoon. Laser ablation continuous flow isotope ratio mass spectrometry (LA-CF-IRMS) on modern shells of Geloina erosa revealed ‘saw-tooth’ stable isotopic profiles that bear a close resemblance to peaks and troughs of trends in recent local rainfall, including the 1998 El Niño drought, highlighting the potential of Geloina erosa for reconstructing seasonality of the Southeast Asian Palaeomonsoon. LA-CF-IRMS analysis of prehistoric shells of Geloina erosa held in the Harrisson Archives of the Sarawak Museum revealed cyclical shifts in δ¹⁸O with similar amplitudes of variation as found in modern shells of Geloina erosa. As at the present day, this probably reflects the changing seasonality of the monsoon rains with shifts to negative δ¹⁸O values during periods of high runoff. Lighter mean δ¹⁸O values of the prehistoric shells, however, may indicate a greater annual surplus of rainfall and possibly consistent with the early Holocene strengthening of the summer monsoon at that time. The similarity of the last growth increment δ¹⁸O of the prehistoric shells to their mean δ¹⁸O profile values suggests that gathering took place during times of moderate runoff.     

Systematic Reworking of Lithics from Earlier Cultures in the Early Holocene of Dakhleh Oasis,Egypt

Abstract

A raw material form scarcely mentioned in the literature on lithic production—chipped stone artifacts manufactured by members of still earlier cultures—is used for a substantial portion of the toolkits in certain industries of Dakhleh Oasis, south-central Egypt. In one group of early Holocene (Masara) sites, the majority of double patinated tools are chunky burins, systematically manufactured from Levallois flakes and similar thick-sectioned older artifacts. Since fresh chert and other workable stone is available in the area, it appears that old, recycled lithics constitute the preferred raw material for these tool classes. The sites in question seem to be field camps where the burins were both made and used.     

Reduction of topography effect in inductive electromagnetic profiles: application on coastal sambaqui (shell mound) archaeological site in Santa Catarina state, Brazil

We present results of electrical conductivity profiles obtained with inductive electromagnetic geophysical method in Santa Marta archaeological site, Santa Catarina State, southern Brazil. This site is a sambaqui (shell mound), in which several human occupation remains are found during pre-colonial period such as buried lithic and bone artifacts, fire-place, etc. Most of these mounds include as well many human burials, which, in many cases, point to funerary ritual as a main agency for mound building. A set of profiles of apparent electrical conductivity and magnetic susceptibility was acquired in two sites aiming the identification of geophysical anomalies with potential interest for excavation. To enhance conductivity data, we applied an effective procedure to remove topographical effects in the apparent conductivity measurements, which are rather conditioned by the presence of a variable water table depth or conductive sediment layer. A linear dependence among conductivity values and the site elevation provided a simple linear model to remove the influence of topography. Corrected electric conductivity maps substantially improved the definition of anomalies, many of them rather subtle in raw data images. Corrected maps also show a better adherence with magnetic susceptibility maps, both of them identifying archaeological structures of interest: a well-structured fire-place and a concentration of ceramic fragments.     

On the probable genotype of domestic cats in ancient Egypt

Genetic and archaeological evidence suggests that the majority of mummified ritual cats (Felis libyca subsp.) in ancient Egypt carried the t⁺ allele and exhibited the striped tabby phenotype. A few of these ritual cats, however, appear to be F. chaus subsp., most likely carried the T^a allele and were characterized by the Abyssinian phenotype. Several types of evidence suggest that the T^a allele first became fixed in a Felis sp. population in either southeast Asia or northeast Africa. A number of Felis subspecies appear to be plausible candidates for the population of T^a origin.     

Fowling during the Gravettian: the avifauna of Pavlov I, the Czech Republic

This is the first article that describes in detail the bird remains from the Gravettian mega-site Pavlov I in the Czech Republic. More than 1000 bird bones represent at least 19 taxa, of which the most numerous are tetraonids including black grouse (Tetrao tetrix), willow grouse (Lagopus lagopus) and ptarmigan (Lagopus muta), and ravens (Corvus corax). The archaeological and biological contexts indicate that most birds were hunted by people in the vicinity of the site, possibly with the help of knotted nets made from plant fibres. We suggest that ravens were killed while feeding on carcasses and/or food remains that may have been disposed of intentionally, and feathers may have been used for arrow fletching. Human-modified bones indicate that birds were used not only for food but also as raw material for tools and decoration. Although mammals were certainly more important in the subsistence of the Gravettian people, it is clear that birds played a role in their culture. The location of Pavlov I enlarges the explanatory scope of the Broad Spectrum Revolution hypothesis to include higher latitudes north of the Mediterranean.     

A 3D morphometric analysis of surface geometry in Levallois cores: patterns of stability and variability across regions and their implications

Levallois cores and products were manufactured by hominin populations distributed across wide regions of Africa and Eurasia. Levallois technology remains an important focus for research in Palaeolithic archaeology, yet quantitative morphological comparisons of Levallois core morphology from different regions remain rare. Here, utilizing Levallois cores from Africa, the Near East, Europe, and the Indian subcontinent, patterns of morphological variability in the shape of the Levallois flaking surface and core outline (margin) shape were examined for patterns of variability and stability across regions using 3D geometric morphometrics. The multivariate statistical shape analyses undertaken revealed a clear pattern: that is, the greatest levels of shape variability in Levallois cores is evident in the form of their outline (planform) shape. Conversely, the geometrical relationship between the margin of the Levallois cores and their topological surface morphology was relatively uniform. This pattern of variability was evident in terms of variation both across regions and between cores from the same locality. These results indicate that the outline form of such cores was a less important variable than the geometric/topological properties of the surface morphology and, in particular, the relationship between the margin of the core and those variables. These results have implications for why it has been reported that replicating such cores in modern experiments is a particularly difficult task. The specific interrelationship between the geometric properties of the core and the core margin provide further evidence that Levallois core technology would be unlikely to emerge from the context of opportunistic migrating platform reduction strategies (such as those seen in many Mode 1 industries). If, as is widely suggested, Levallois cores were deliberate products in Pleistocene contexts, these results also hint that relatively sophisticated means of social transmission (i.e. teaching) may have been required to sustain their production over time and space.     

The Upper Palaeolithic Lithic Industry of Nazlet Khater 4 (Egypt): Implications for the Stone Age/Palaeolithic of Northeastern Africa

Between Marine Isotope Stage (MIS) 4 and 2, Northeast Africa witnessed migrations of Homo sapiens into Eurasia. Within the context of the aridification of the Sahara, the Nile Valley probably offered a very attractive corridor into Eurasia. This region and this period are therefore central for the (pre)history of the out-of-Africa peopling of modern humans. However, there are very few sites from the beginning of the Upper Palaeolithic that document these migration events. In Egypt, the site of Nazlet Khater 4 (NK4), which is related to ancient H. sapiens quarrying activities, is one of them. Its lithic assemblage shows an important laminar component, and this, associated with its chronological position (ca. 33 ka), means that the site is the most ancient Upper Palaeolithic sites of this region. The detailed study of the Nazlet Khater 4 lithic material shows that blade production (volumetric reduction) is also associated with flake production (surface reduction). This technological duality addresses the issue of direct attribution of NK4 to the Upper Palaeolithic.     

Argentine territorial nationalism revisited: The Malvinas/Falklands dispute and geographies of everyday nationalism

This paper is concerned with expressions of Argentine territorial nationalism with a specific focus on the Malvinas/Falklands dispute. Billig’s (1995) notion of banal nationalism has been widely applied as a means to understanding the ways in which national identities are learnt and reproduced by the populace, through a multitude of ‘mundane’ representations. More recently Billig’s (1995) thesis has been critiqued (Jones & Merriman, 2009) for its rigidity and inability to take account of the different ways these nationalisms are produced and received (Müller, 2008) within and outside of the nation-state. We build on these interventions by arguing that research into territorial nationalism should not ignore the wider temporal, spatial, political and everyday contexts in which such discourses emerge and are consumed. To illustrate this diversity we contend that territorial nationalism and, more specifically, the attention placed on the Malvinas dispute by the Argentine government has varied in its intensity, depending on wider political events and agendas in the South West Atlantic and Latin American regions. Secondly, through the use of interview extracts from a pilot study conducted with 20 young people in Buenos Aires, we suggest that Argentine territorial nationalism is not received uniformly across the nation-state and, rather, should be explored in its everyday contexts. These contexts take into consideration things like respondent’s geographical location, personal/familial relationships and generation, amongst other variables, in order to more sensitively appreciate Argentine territorial nationalism’s multifarious reception.     

New Human Remains of Archaic Homo sapiens and Lower Palaeolithic Industries from Visogliano (Duino Aurisina, Trieste, Italy)

New human remains have been found during recent excavations conducted in the lower section of Visogliano dolina (Trieste, Italy). They are represented by teeth and a fragment of particularly robust mandible that for their morphological and morphometrical characters can be generically attributed to archaic Homo sapiens. The lithic industry is formed by flakes, carinated points, scrapers, choppers and chopping tools and is characteristic of the Italian Pebble Culture. Sediments, pollen and faunal remains indicate that this part of the deposit was formed during interglacial climatic conditions in the early, but not initial phase of Middle Pleistocene (isotopic stadium 13 or 11).     

The Irish Sí Tradition: Connections Between the Disciplines,and What’s in a Word?

One of the most prominent features of the Irish landscape is the great multitude of megalithic sites which date back to the Neolithic. In this paper, I will attempt to demonstrate that the understanding of these sites in Ireland can be enhanced by referencing the native tradition, including the Irish word for the sites, sí, and the sís powerful cultural tradition attested to throughout native Irish folklore, literature, onomastics, and traditional knowledge. In doing so, I will explore the difficulties and the potentials of interdisciplinary communication between archaeology and folkloristics, and the related issues regarding communication between official and unofficial discourses.     

Lithic Analysis of an Early Archaic Knapping Area

Abstract

Archaeological excavations at 15LO207 in Logan County, Kentucky documented a lithic reduction area associated with an Early Archaic Kirk Corner Notched component. High densities of flake debris were recovered, along with biface production failures, from this area. Analysis of these materials indicated that lithic manufacture focused on the reduction of early stage bifaces of the local Ste. Genevieve chert into late stage bifaces. These bifaces were transported elsewhere for further reduction and use. In addition, data indicate a staged approach to biface reduction for the Early Archaic.     

ARCHAEOLOGICAL PETROLOGY AND THE ARCHAEOMETRY OF LITHIC MATERIALS*

For 50 years, archaeologists and physical scientists have been dating, determining the composition of and measuring stone tools, and reporting them in Archaeometry and many other journals. In Archaeometry specifically, the number of papers devoted to the analysis of lithic material has increased at least 30 times since 1958 and volume 1. This is a reflection not only of an increase in the number of scholars devoting their time to the archaeometry of stone, but also of increases in the quality and quantity of instrumental technology available to researchers in the field.     

Particle size distribution of lithic assemblages and taphonomy of Palaeolithic sites

Lithic debris derived from knapping and used tools can be assimilated to simple sedimentary particles that may undergo size sorting when exposed to geomorphic processes such as streamflow or overland flow. Sorting can be identified by comparing the size distribution of archaeological assemblages to that of experimental core reduction sequences. A new database including different types of raw material (mainly flint and quartzite) and Palaeolithic debitage (blade, Levallois, discoid, on anvil, and shaping) has been built for this purpose. Palaeoeskimo data have also been added to illustrate microlithic industries. For all the debitages and raw materials, the particle size of knapping products >2 mm in width fits with a power-law distribution and shows only minor fluctuations, the range of which is always <15% between experiments (all steps of the chaîne opératoire included up to the final tool). A lithic assemblage derived from block/core knapping or blank/preform production will display a particle size distribution close to the experimental distributions if not subsequently modified. Modifications may originate either from sedimentary processes or from anthropogenic factors. To help distinguishing amongst these, data on the impact of both water flows on sedimentary particles or experimental assemblages, and anthropogenic processes such as importation-exportation (of core, preforms or finished tools) or uneven spatial distribution of the different steps in core reduction and tool production within a site, are reviewed. By contrast to anthropogenic modifications, sedimentary processes are generally typified by strong impoverishment in or selective accumulation of fine-grained (<10 mm) artefacts together with a low intra-site variability (spatial homogenization) or a downslope size trend. Archaeological case studies taken from French Palaeolithic site are then detailed. Evidence for lithic redistribution implies that care should be taken in archaeological site analysis since sorting may impact significantly the initial techno-typological balance of the assemblage.     

An Ethnoarchaeological Study of Hafting and Stone Tool Diversity among the Gamo of Ethiopia

The significance of flaked stone tool variation has been a source of great archaeological debate for over 100 years. Even though evidence for stone tool hafting exists as far back as the Middle Paleolithic/Middle Stone Age, there is a dearth of information concerning how hafting affects stone tool technology. This ethnoarchaeological study of hafted stone scrapers among the Gamo of southern Ethiopia examines why a single cultural group utilizes two different hafts, which generate different lithic morphologies, technologies, and spatial distributions. The relationships between history, environment, and social group membership are explored to demonstrate how these associations create variation in technological practices.

Detection of parasite eggs from a moat encircling the royal palace of Silla, the ancient Korean Kingdom

We conducted a paleo-parasitological study on soil samples from the ancient moat ruins of Weolseong palace, of the Silla Dynasty (BC 57–AD 935) of Korea. Based on the cultural remains found in the mud-soil layer, the layer was precipitated onto the floor of a moat between the 5th and 8th centuries AD. We found Trichuris trichiura eggs only in that mud-soil layer, whereas no parasite eggs were identified in the other archaeological strata of the ruins. As T. trichiura eggs are shed only in human feces, we speculated that palace toilet contents were continually drained into the moat; therefore, at a certain point in time after construction, the moat finally became a ditch around the palace. Structures in the stone embankments of the moat, possibly designed to make the water flow continuously in one direction, might reflect the Silla people's efforts to alleviate the ever-increasing problems inherent in a moat.     

数字化全色接笔技术在华池双塔寺佛教版画虚拟修复中的应用

由于保存环境及人为破坏等因素的影响，中国古版画大多存在不同程度的残缺病害，艺术和研究价值受到严重破坏。为再现古代版画艺术风貌，利用基于色彩管理系统的图像采集、数字绘画、艺术微喷等技术，对甘肃华池县博物馆一幅图像严重残缺的佛教版画进行了数字化全色接笔虚拟修复。经实践验证，数字化全色接笔技术可以在不干预文物本体的基础上精准还原图形和色彩，且虚拟修复后的复制品作为图像补充，与传统修复后的文物本体共同展示时，可完善其艺术美学观感。研究结果可为书画保护修复技术发展研究提供参考。     

Paleolithic occupations of the Göllü Dağ, Central Anatolia,Turkey

Abstract

Systematic archaeological surface reconnaissance of the Göllü Da? volcanic complex from 2007 to 2012 documented more than 230 findspots with Paleolithic artifacts, ranging from isolated finds to extensive and dense scatters of artifacts. Most of the activities represented relate to exploitation of the rich obsidian resources in the region. Paleolithic artifacts are attributed mainly to the Middle Paleolithic based on the presence of Levallois technology but there is a substantial Lower Paleolithic component represented by handaxes and other large bifacial tools. Upper and Epipaleolithic sites and artifacts are scarce or absent in the survey sample. The distributions of handaxes and Levallois elements differ substantially, reflecting differences in site preservation and exposure as well as organization of prehistoric activities. Multiple variants of Levallois are represented but centripetal preferential and unipolar flake production dominate. The frequent co-occurrence of different Levallois forms suggests flexible reduction strategies. Distributions of different classes of artifact across the survey area indicate that the Middle Paleolithic occupations of Göllü Da? were not entirely oriented toward workshop activities.