Modeling and Seismic Response Analysis of Italian Code-Conforming Reinforced Concrete Buildings

ABSTRACT

This study investigates the seismic response of reinforced concrete buildings designed according to the current Italian building code. Number of stories, site hazard, presence and distribution of masonry infill panels, and type of lateral resisting system are the key investigated parameters. The main issues related to design and modeling are discussed. Two Limit States are considered, namely Global Collapse and Usability-Preventing Damage. The main aim of the study is a comparison between the seismic response of the buildings, investigated through nonlinear static and dynamic analyses. Irregularity in the distribution of infill panels and site hazard emerge as the most influential parameters.     

INFLUENCE OF CAPACITY DESIGN METHOD ON THE SEISMIC RESPONSE OF R/C COLUMNS

Abstract

This paper aims at assessing the influence of the design procedure followed in designing the columns of a reinforced concrete (R/C) building on the performance of the columns, aa well as of the structure as a whole, when subjected to seismic loading; to identify potential weaknesses in currently adopted procedures; and to present a new procedure which is based on currently-available, powerful analytical tools, and results in increased reliability with regard to seismic loading. Two case studies are presented, involving multistorey reinforced concrete buildings with frame and dual structural systems subjected to various appropriately-scaled input accelerograms. The results obtained indicate that capacity design of columns results in adequate safety margins against failure, even when the adopted overstrength factors are quite low, but hinging in columns is not avoided unless very high overstrength factors are used. The suggested novel technique of capacity design led to very satisfactory seismic performance, and offers the possibility of cost reduction by achieving an appropriate balance between provided flexural strength and corresponding confinement.     

DISPLACEMENT-BASED SEISMIC ASSESSMENT OF REINFORCED CONCRETE BUILDINGS

Abstract

Seismic assessment of existing reinforced concrete frame and shear wall buildings is discussed. Building on an earlier preliminary assessment procedure incorporating aspects of capacity design into a systems approach for assessment, suggestions are made towards a displacement-based, rather than forced-based, approach to determining available seismic capacity. Based on results from recent experimental programs, procedures are proposed for assessing member strength including column and beam-column joint shear-strength, that result in less conservative estimates of performance than would result from application of existing code rules.     

Modeling and Seismic Response Analysis of RC Precast Italian Code-Conforming Buildings

ABSTRACT

In this study, industrial single-story RC precast buildings are investigated. Twenty-four case studies have been considered, in which the column height, the beam spans and the seismic hazard level are varied. The seismic design of the selected case studies is performed according to the Italian building code and additional technical documentation. Three-dimensional nonlinear models are defined to perform static and dynamic analyses for the seismic assessment of the selected case studies. Demand/capacity ratios in terms of the selected engineering demand parameters are computed for ten increasing values of the seismic input return period.     

NON-LINEAR SEISMIC RESPONSE OF ECS DESIGNED RC BUILDING STRUCTURES

In this paper, results of an analytical study on the non-linear dynamic behaviour of reinforced concrete buildings designed according to modern European Codes (Eurocode 8) are presented. An investigation of the seismic performance of 8-storey regular and irregular buildings is carried out. The study is aimed at evaluating their seismic structural performance with a focus on the influence of several design parameters used in the code affecting non-linear response. Towards this aim, use is made of a suite of spectrum-compatible artificial accelerograms. It is concluded that EC8 provisions, although correct in principle, are conservative, at least for the structures and input motions considered, in view of the very low predicted damage levels observed in most cases.     

Building survey forms for heterogeneous urban areas in seismically hazardous zones. Application to the historical center of Valparaíso,Chile

ABSTRACT

Building survey is an essential data-collection procedure to feed large-scale seismic vulnerability assessment. The available strategies usually consider survey forms to gather information about the urban buildings. The application of the available survey forms poses important challenges for the case of the heterogeneous urban centers including different structural typologies. This work proposes four specific survey forms for traditional structural typologies constructed with masonry, reinforced concrete, mixed steel-reinforced concrete, and timber. The proposed forms request essential information on the parameters necessary for seismic vulnerability assessment, by evaluating the lateral-load resistant system, regularity, condition of conservation, and existing damages. The survey forms were applied to the study of 111 buildings of the historical center of Valparaíso, Chile. The proposed methodology was complemented with the use of Geographic Information Systems to obtain a complete database with the structural characterization of the most representative typologies for future works of large-scale seismic vulnerability assessment.     

Experimental Investigation of Exterior Unreinforced Beam-Column Joints with Plain and Deformed Bars

Experimental tests on four full-scale exterior unreinforced reinforced concrete (RC) beam-column joints, representative of the existing non-conforming RC frame buildings, are carried out. The specimens have different longitudinal reinforcements (plain or deformed) and they are designed in order to be representative of two typical design practices (for gravity loads only or according to an obsolete seismic code). Different failure modes are observed, namely joint failure with or without beam yielding. The local response of the joint panel is analyzed. The different joint deformation mechanisms and their contribution to the deformability and to the energy dissipation capacity of the sub-assemblages are evaluated.     

METHODOLOGY FOR THE PROBABILISTIC ASSESSMENT OF q FACTORS. A DAMAGE INDEX APPROACH

The objective of the present work is to present a methodology for the identification of relevant limit states, namely ultimate limit states leading to structural collapse, and for the assessment of design q factors (or force reduction factors) for reinforced concrete structures under seismic loading. It follows a probabilistic approach based on damage indices. The utilised nonlinear models, as well as the damage indices, which are those proposed by Miner and by Park and Ang, are.described. The methodology of analysis is presented emphasising its probabilistic characteristics. Some parametric studies are carried out, including the analysis of one regular plane frame reinforced concrete structure, designed for three different ductility classes (those proposed by Eurocode 8) and assuming different q factors in design. Results show how the chosen damage indices can be used as parameters to characterise the structural response and how the proposed methodology can be used to assess the design q factors. It is also shown that, for moderate seismic input, the three ductility classes are essentially equivalent in terms of maximum damage indices, but that for higher seismic levels the differences are evident, justifying the use of different q factors.     

EVALUATION OF THE SEISMIC PERFORMANCE OF EXISTING RC BUILDINGS: II. A CASE STUDY FOR REGULAR AND IRREGULAR BUILDINGS

The results of a parametric study are presented, concerned with the evaluation of the structural overstrength, the global ductility and the available behaviour factor of existing reinforced concrete (RC) buildings designed and constructed according to past generations of earthquake resistant design codes in Greece. For the estimation of these parameters, various failure criteria are incorporated in a methodology established to predict the failure mode of such buildings under planar response, as described in detail in a companion publication. A collection of 85 typical building forms is considered. The influence of various parameters is examined, such as the geometry of the structure (number of storeys, bay width etc.), the vertical irregularity, the contribution of the perimeter frame masonry infill walls, the period of construction, the design code and the seismic zone coefficient. The results from inelastic pushover analyses indicate that existing RC buildings exhibit higher overstrength than their contemporary counterparts, but with much reduced ductility capacity. The presence of perimeter infill walls increases considerably their stiffness and lateral resistance, while further reducing their ductility. Fully infilled frames exhibit generally good behaviour, while structures with an open floor exhibit the worst performance by creating a soft storey. Shear failure becomes critical in the buildings with partial height infills. It is also critical for buildings with isolated shear wall cores at the elevator shaft. Out of five different forms of irregularity considered in this study, buildings with column discontinuities in the ground storey exhibit the worst performance. Furthermore, buildings located in the higher seismicity zone are more vulnerable, since the increase of their lateral resistance and ductility capacity is disproportional to the increase in seismic demand.     

Modeling and Seismic Response Analysis of Italian Code-Conforming Single-Storey Steel Buildings

ABSTRACT

This article describes the structural design, nonlinear modeling, and seismic analysis of prototype single-storey non-residential steel buildings made of moment-resisting portal frames in the transverse direction and concentric braces in the longitudinal direction. Various design parameters (building geometry, seismic hazard, foundation soil category) and different modeling assumptions (bare frame model, model including cladding elements, ground motions including vertical accelerations, and modeling uncertainties) were considered to investigate their effects on the simulated seismic performance.     

Modelling and Seismic Response Analysis of Italian Code-Conforming Base-Isolated Buildings

ABSTRACT

This paper reports on results of nonlinear analyses performed within the RINTC project on an RC building isolated with different systems (High Damping Rubber Bearings, High Damping Rubber Bearings and Flat Sliding Bearings, Friction Pendulum System) and designed according to the Italian design code. The seismic response has been evaluated under different seismic input levels of two sites with different hazard and by considering two Limit States: Global Collapse and Usability-Preventing Damage. The influence of seismic stoppers and modelling uncertainties is also evaluated. Results permit to compute the implicit collapse risk and to identify critical aspects of current design procedures.     

SEISMIC DESIGN AND RESPONSE OF BARE AND MASONRY-INFILLED REINFORCED CONCRETE BUILDINGS. PART I: BARE STRUCTURES

Abstract

Eurocode 8 is applied for the complete design of 26 multi-storey reinforced concrete buildings to study its operationally and compare the implications of trading strength for ductility through designing the same structure for a different Ductility Class. The difference between the conventional full Capacity Design of columns in bending and the relaxed one allowed by Eurocode 8 is quantified, and the implications on the column capacities are examined. About half of the designed buildings, representative of the class of regular frames, are subjected to nonlinear dynamic response analyses to spectrum-compatible motions with intensities up to twice that of the design motion. Nonlinear modeling is very simple, but gives satisfactory agreement with available quasistatic or pseudodynamic test results on full scale structures. Results show that the three Ductility Classes of Eurocode 8 are essentially equivalent in terms of material quantities and seismic performance. Within the limitations of the nonlinear modelling, the response results suggest very satisfactory performance of structures designed to Eurocode 8, even under twice the design motion intensity. Softening of the structure due to concrete cracking and steel yielding significantly reduces the seismic force demands and contributes to the satisfactory performance, despite the increased P — 6 effects. Another important contributor to the good performance is the significant overstrength of the members considered in the analyses with their average as-built properties. Beam overstrength due to the contribution of the slab to flexural capacity is large enough to overcome the effects of the application of the relaxed Capacity Design rule to columns in bending. However, the resulting column plastic hinging does not lead to drift concentrations suggesting formation of storey-sway mechanisms.     

Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads

In the last decades, particular attention has been paid to the seismic vulnerability of existing reinforced concrete buildings designed for gravity loads only. Such buildings, designed before the introduction of capacity design in modern seismic codes, are very common, particularly in seismic prone countries of the Mediterranean area. Due to poor detailing and lacking of capacity design principles, high vulnerability has been highlighted in several past studies. In this article, inadequate seismic response and peculiar damage pattern are investigated by means of shake table tests performed on a 1:2 scaled 3-story infilled prototype. Particular attention is given to the role of beam-column joints and frame-panel interaction. The effectiveness of the EC8-based assessment approach is then evaluated; both linear and nonlinear numerical models, with different levels of sophistication, have been implemented in order to explore their behavioral aspects.     

Seismic Vulnerability of Historical Masonry Aggregate Buildings in Oriental Sicily

ABSTRACT

The seismic vulnerability assessment of historical UnReinforced Masonry (URM) buildings is a very complex task since it is strongly related to a great variety both of geometrical layouts and of masonry mechanical characteristics. In this article, some results of a Catania University research project, denomined “FIR 2014”, focused on the seismic vulnerability estimation of historical buildings, built in Catania after the 1963 earthquake, are presented. First, a detailed typological analysis of the considered urban fabric, characterized by typical residential masonry buildings, has been performed. Such analysis allowed recognizing an elementary structural modulus, which has been studied according to different geometrical layouts representative of isolated or aggregate buildings. The results of nonlinear static analyses, performed by applying an innovative macro-element approach, allowed for the assessment the seismic vulnerability of typical URM buildings coherently to the Italian seismic code. The adopted macro-element strategy for the seismic assessment of aggregate masonry buildings, although related to a specific historical center, may be applied to similar urban fabrics and can also be used for the calibration and validation of fast seismic assessment strategies, particularly useful for the evaluation of the seismic risk at urban scale.     

ESTIMATION OF NEAR-SOURCE GROUND MOTION AND SEISMIC BEHAVIOUR OF RC FRAMED STRUCTURES DAMAGED BY THE 1999 ATHENS EARTHQUAKE

On September 7, 1999 an earthquake with magnitude M _W =5.9 occurred close to the city of Athens in Greece. More than 80 buildings collapsed, about 150 deaths and hundreds of injuries were reported. Soon after the event a damage investigation was carried out by two of the authors in the most heavily struck areas. The most serious damages were observed in the northern suburbs of Athens, where reinforced concrete frames and masonry buildings represent the prevalent construction systems. The hysteretic energy demands imposed on RC buildings should have been rather severe considering the structural systems characteristics and the inadequate construction details. However, over-strengths, redundancy and especially the presence of infill walls, provided a significant increase of the seismic capacity and contributed to the survival of many buildings.

The objective of the present work is to reproduce and analyse the response of typical RC frames subjected to the 1999 Athens earthquake in areas where the observed damage was particularly severe but no recordings of the ground motion were available. After a general overview of the seismotectonic environment, seismological data, observed macro-seismic intensities, structural typologies and observed building behaviour, an attempt is made to identify representative excitations in the meizoseismal area. Specifically, the required accelerograms are obtained by modifying available records so as to reproduce a given global energy content and to be consistent with the observed damage. To study the seismic response of RC models, the obtained accelerograms are used to perform nonlinear dynamic analyses.     

CALIBRATION OF FORCE REDUCTION FACTORS OF RC BUILDINGS

A comprehensive study is undertaken to assess and calibrate the force reduction factors (R) adopted in modern seismic codes. Refined expressions are employed to calculate the R factors “supply” for 12 buildings of various characteristics represent a wide range of medium-rise RC buildings. The “supply” values are then compared with the “design” and “demand” recommended in the literature. A comprehensive range of response criteria at the member and storey levels, including shear as a failure criterion, alongside a detailed modelling approach and an extensively verified analytical tool are utilised. A rigorous technique is employed to evaluate R factors, including inelastic pushover and incremental dynamic collapse analyses employing eight natural and artificial records. In the light of the information obtained from more than 1500 inelastic analyses, it is concluded that including shear and vertical motion in assessment and calculations of R factors is necessary. Force reduction factors adopted by the design code (Eurocode 8) are over-conservative and can be safely increased, particularly for regular frame structures designed to lower PGA and higher ductility levels.     

General Seismic Load Distribution for Optimum Performance-Based Design of Shear-Buildings

An optimization method based on uniform damage distribution is used to find optimum design load distribution for seismic design of regular and irregular shear-buildings to achieve minimum structural damage. By using 75 synthetic spectrum-compatible earthquakes, optimum design load distributions are obtained for different performance targets, dynamic characteristics, and site soil classifications. For the same structural weight, optimum designed buildings experience up to 40% less global damage compared to code-based designed buildings. A new general load distribution equation is presented for optimum performance-based seismic design of structures which leads to a more efficient use of structural materials and better seismic performance.     

Seismic Vulnerability Assessment of the Urban Building Environment in Nablus,Palestine

ABSTRACT

This article describes a specifically developed framework to produce a seismic physical vulnerability model of residential buildings in Nablus (Palestine) within the European project SASPARM2.0. Based on the structural taxonomy of the territory, two different forms were defined to collect geometrical and structural data of buildings by different stakeholders (citizens and practitioners). This data was then employed to produce fragility curves using the mechanics-based procedure SP-BELA. To estimate seismic risk, the developed fragility model was combined with a hazard curve for the corresponding location. The described procedure is implemented in a WebGIS platform that allows to georeference and assess the surveyed buildings and define retrofitting strategies. Finally, the article carries out a comparison between the fragility curves of buildings in Nablus and the ones calculated for similar building typologies within a UNDP Jordan project aiming at the integrated risk assessment in Wadi Musa and surroundings.     

Review of Out-of-Plane Seismic Assessment Techniques Applied To Existing Masonry Buildings

ABSTRACT

Observations after strong earthquakes show that out-of-plane failure of unreinforced masonry elements probably constitutes the most serious life-safety hazard for this type of construction. Existing unreinforced masonry buildings tend to be more vulnerable than new buildings, not only because they have been designed to little or no seismic loading requirements, but also because connections among load-bearing walls and with horizontal structures are not always adequate. Consequently, several types of mechanisms can be activated due to separation from the rest of the construction. Even when connections are effective, out-of-plane failure can be induced by excessive vertical and/or horizontal slenderness of walls (length/thickness ratio). The awareness of such vulnerability has encouraged research in the field, which is summarized in this article. An outline of past research on force-based and displacement-based assessment is given and their translation into international codes is summarized. Strong and weak points of codified assessment procedures are presented through a comparison with parametric nonlinear dynamic analyses of three recurring out-of-plane mechanisms. The assessment strategies are marked by substantial scatter, which can be reduced through an energy-based assessment.     

Probabilistic Calibration and Experimental Validation of the Seismic Design Criteria for One-Story Concrete Frames

This article investigates the seismic performance of one-story reinforced concrete structures for industrial buildings. To this aim, the seismic response of two structural prototypes, a cast-in-situ monolithic frame and a precast hinged frame, is compared for four different levels of translatory stiffness and seismic capacity. For these structures an incremental nonlinear dynamic analysis is performed within a Monte Carlo probabilistic simulation. The results obtained from the probabilistic analysis prove that precast structures have the same seismic capacity of the corresponding cast-in-situ structures and confirm the overall goodness of the design criteria proposed by Eurocode 8, even if a noteworthy dependency of the actual structural behavior from the prescribed response spectrum is pointed out.

The experimental verification of these theoretical results is searched for by means of pseudodynamic tests on full-scale structures. The results of these tests confirm the overall equivalence of the seismic behavior of precast and cast-in-situ structures. Moreover, two additional prototypes have been designed to investigate the seismic behavior of precast structures with roof elements placed side by side. The results of these further tests show that an effective horizontal diaphragm action can be activated even if the roof elements are not connected among them, and confirm the expected good seismic performance of these precast systems. Finally, the results of the experimental tests are compared with those obtained from nonlinear structural analyses. The good agreement between numerical and experimental results confirms the accuracy of the theoretical model and, with it, the results of the probabilistic investigation.