Quarrying and Production of Milling,Implements at Antelope Hill,Arizona

Abstract

To process mesquite, maize, and other substances, aboriginal groups living in the Lower Colorado-Lower Gila rivers region of SW North America used characteristic milling equipment: squared, flat-faced, convex-based metates (lower grindstones) with elongated manos (upper grindstones) and large wooden mortars with long, cylindrical stone pestles. Andesite and sandstone bedrock outcrops where stone was quarried and milling implements produced have been located. The archaeological deposits at the quarries have not been masked by the debris of later quarrying for rotary mills or building blocks, and thus the quarry sites offer an opportunity to study the production of ancient forms of milling implements, and provide insights into the organization of an ancient stone technology. Antelope Hill, a large arkosic sandstone quarry on the Lower Gila River in Arizona is presented as an example of a widespread phenomenon in the region. Analysis of quarry debris in the field and laboratory, experimental replication, and ethnographic and historical data, combined, have resulted in an understanding of this aspect of aboriginal technology.     

Some Preliminary Observations on Subsurface Damage on Experimental and Archaeological Quartz Tools using CLSM and Dye

Lithic use-wear analysis mainly deals with use-wear features which can be observed on the surface of stone tools but a major part of the wear of brittle material is found under the surface. This wear might also be a clue to the interpretation of archaeological stone tools. In this paper we try to examine subsurface damage on experimental and archaeological quartz tools by dying them with fluorescent colour and scanning them with a CLSM. This method shows that various worked materials cause different subsurface damage, which is related to the hardness of the worked material.     

Identifying grinding,scoring and rubbing use-wear on experimental ochre pieces

Ochre pieces were used experimentally for a variety of grinding, scoring and rubbing activities to record and compare the use-wear markings that each activity creates on the ochre piece. Ochre that is ground on coarse or fine-grained slabs develops parallel striations that cover the surface of the piece. The striations have unfrayed ends. Grinding is the only activity that results in significant changes to the surface shape of the ochre, producing a plane. When ochre is scored either to create a deliberate design or to produce powder, the grooves that form often do not reach all the edges of the used surface and they regularly have frayed terminations. This demonstrates that the incisions were created by multiple scoring strokes. When ochre is scored to manufacture ochre powder the incisions that are generated are parallel groups of grooves with erratically oriented grooves as well. Bone and wooden tools are soft and they therefore do not generally create obvious incisions on ochre pieces. Grooves created through grinding on a slab or scoring with a stone tool have microstriations within them and they show a range of profile shapes. The most common use-wear from rubbing ochre on animal hide, human skin, human hair and wood is smoothing, edge rounding and polish, although incisions and microstriations also occur occasionally. Residues are often left on an ochre piece after rubbing or scoring with organic materials. The comparative collection of macro- and microscopic use-wear marks from experimentally ground, scored and rubbed ochre is useful as an aid to classifying archaeological collections of ochre.     

The role of abrasives in the formation of lithic use-wear

This paper briefly examines the question of the influence of abrasive particles on the development of use-wear on stone tools. It is argued that grit inclusions may have been a common element of prehistoric tool using conditions, hence the need for archaeological experiments which consider this variable. A series of experiments are described where end-scrapers were used on bone and hide surfaces both with and without a grit inclusion. The resulting wear patterns are discussed and illustrated. It is concluded that the addition of grit to the worked surface causes a dramatic and demonstrable change in use-wear development.     

Ohio Hopewell Ceremonial Bladelet Use at the Moorehead Circle,Fort Ancient

In the past twenty years, lithic use-wear studies have been used to determine the function of Hopewell bladelets. These studies have uniformly shown that the bladelets were multipurpose, utilitarian tools in domestic contexts. Debate arises as to their function in ritual or ceremonial contexts. The question of bladelet function in ceremonial contexts remains unanswered because use-wear studies of bladelets have not been extensively applied to well-provenienced ceremonial assemblages. Microwear analysis was conducted on a sample of bladelets recovered from the Moorehead Circle within the Fort Ancient Earthworks in order to comment on the above debate as well as to determine the activities that occurred there prehistorically. The Moorehead Circle was a center of intensive activity as evidenced by the high rate of utilization and numerous tasks performed with bladelets. Intersite comparison indicates that the Moorehead Circle bladelets were utilized for the same range of tasks as bladelets from other sites in Ohio.     

Evidence for Maya Household Subsistence and Domestic Activities: Use-Wear Analysis of the Chipped Chert Assemblage from Pook’s Hill,Belize

Abstract

From 1999–2005, the Belize Valley Archaeological Reconnaissance Project excavated Pook’s Hill (PKH-1), a single plazuela group located in the Roaring Creek Valley, Cayo District, Belize. Artifacts recovered at Pook’s Hill date predominantly to the Late and Terminal Classic (A.D. 700–950) and can be stratigraphically segregated into two distinct occupation phases, namely a Late Classic (A.D. 700–830) and a Terminal Classic-Early Postclassic (A.D. 830–9507+) phase. The chipped chert and chalcedony tools from the two phases were included in a combined program of low- and high-power use-wear analysis to reconstruct aspects of the socioeconomy. The results of the analyses reveal that the site’s inhabitants produced and used both formal and informal tools for a wide variety of subsistence and domestic tasks, and for the production of some utilitarian items. Stone tool use-wear evidence and the recovery of small quantities of other artifacts suggest that the Maya from Pook’s Hill produced more valuable objects of bone, stone, and shell, although it is difficult to accurately identify craft-production activities at the site from the context of recovery. Despite some variation in the specific activities undertaken with the chipped stone tools over time, the organization of lithic technology at Pook’s Hill did not change significantly from the Late Classic into the Early Postclassic period.     

Sickle blade life-history and the transition to agriculture: an early Neolithic case study from Southwest Asia

In Southwest Asia, sickle blades first appear early in the sequence of the transition to agriculture. In the past, detailed qualitative research on silica bearing blade stone tools focus on the characterization of use-wear traces such as polish types and accrual rates. In this paper we approach the study of sickle blades slightly different, choosing to examine tool life-history by developing a method to quantitatively estimate harvesting intensity. The method centers on an experiment of cutting cereal stalks and measuring stone blade edge thickness under a scanning electron microscope as a proxy for cutting time. We end with regressing the experimental results to provide an estimation of how intensively archaeological sickle blades recovered from the site of Dhra’, Jordan were used for harvesting. The results, while preliminary, enable an initial interpretation of sickle blades as important tools with long use-life histories during the early Neolithic in the Southern Levant.     

Practical quantitative lithic use-wear analysis using multiple classifiers

Although use-wear analysis of prehistoric stone tools using conventional microscopy has proven useful to archaeologists interested in tool function, critics have questioned the reliability and repeatability of the method. The research presented here shows it is possible to quantitatively discriminate between various contact materials (e.g., wood, antler) using laser scanning confocal microscopy in conjunction with conventional edge damage data. Experiments with replica and prehistoric tools suggest the quantitative method presented here provides valid functional inferences and is flexible enough to accommodate other relevant sources of data on tool function.     

Finials on stone flakes

When a conchoidal flake is detached from a stone the fracture can either terminate at a small angle to the stone's surface, creating a feather flake, or turn to end at rightangles, creating a hinge or step flake. If a crack turns towards the surface of the stone its path is unstable, and the crack often turns once again, to propagate parallel to the surface of the stone and form a retroflexion or an inflexion on the end of the flake. The retroflexion on the end of a hinge termination has long been recognized, but the inflexion, and its combination with a retroflexion to form a pseudo-bifurcation, has not. Recognition of these finials is important in use-wear analysis for the accurate identification of the various flake scar types and the determination of stone tool function.     

Hafted armatures and multi-component tool design at the Micoquian site of Inden-Altdorf,Germany

Excavation of the Micoquian site Inden-Altdorf (Weisweiler-124) near the former German capital Bonn in western Germany has revealed the first valid open-site habitation features with hut-like structures and associated hearths for the Middle Palaeolithic in Central Europe. It has been dated to the Eemian interglacial (OIS 5e), a warm interglacial between 128 and 115 ka BP. Various wear traces and especially organic residues have been detected on a large number of stone tools using microscopic use-wear analysis of lithics recovered from the site. A multi-level analysis developed through an experimental framework and archaeological study using optical light microscopes, scanning electron microscopes and energy-dispersive X-ray microprobes identified the adhering residues as birch pitch. Birch pitch is the oldest synthetically produced material and was used as an adhesive to attach lithic implements to wooden shafts. While such hafting technology is commonly associated with modern humans in the Upper Palaeolithic, the birch pitch residues found on the Micoquian tools of Inden-Altdorf suggest that hafting technologies and the frequent use of multi-component tools already existed in the Middle Palaeolithic, c. 120 ka BP in central Europe.     

Points and convergent tools in the European Early Middle Palaeolithic site of Payre (SE,France)

The lithic assemblage from the Middle Palaeolithic site of Payre (Rhone Valley, France) contains a large number of convergent tools and pointed tools of various shapes, sizes and retouch types. These were excavated from several archaeological units, dating from marine isotopic stages 8–5, which also yielded human skeletal remains. Consideration of this large tool kit has led to an improved analysis of Middle Palaeolithic tools with two retouched convergent edges. The 350 tools were not described within the classical typological framework, but, rather, from a lithic technological perspective in relation to a discoid debitage. In addition, an initial macroscopic use-wear analysis aided in establishing whether they were used according to their technical and/or morphological features. The Middle Palaeolithic convergent tools from Payre are shown to be quite diversified, and the question of the significance of the retouch and the definition of the various types is addressed. Initial functional results indicate that a clear relationship between shape and function cannot be easily established, and that these tools were used as hand tools. This study contributes to the debate on the use of stone tip spears in the Early European Middle Palaeolithic.     

Verifying the Reliability of Lithic Use-Wear Assessments by ‘Blind Tests’: the Low-Power Approach

Abstract

Several freshly knapped pieces of fine-grained basalt were utilized by an experimenter for a large variety of tasks. The tools were then submitted to an analyst, who was ignorant of the uses to which each of the objects had been put. Employing low-power microscopic techniques, he was able to identify with reasonable accuracy the used part(s) of the implements, the prehended part(s), the activities in which the pieces had been engaged, and the relative resistance of the materials worked. It is argued that low-power micro-wear techniques have several advantages, among which are ease and speed of analysis and availability of equipment. The methods selected for any use-wear analysis of stone tools, however, must be adapted to the particular situation and the questions to be asked of the data.     

Making a significant place: excavations at the Late Mesolithic site of Langley’s Lane,Midsomer Norton,Bath and North-East Somerset

Excavations at the site of Langley’s Lane, Bath and North-East Somerset, have revealed an important sequence of Late Mesolithic activity focused around an active tufa spring. The sequence of activity starts off as an aurochs kill and primary butchery site. Culturally appropriate depositional practices occur through the placement of a selection of bone in the wetland of the spring and the digging of pits around the spring margins. The spring at Langley’s Lane continued to be visited and more animal bone and lithic material was placed in the wetland. Finally, visits to the site involved yet more formalized activity in the form of pit digging and the creation of a stone surface. Activities such as these are difficult to locate in the archaeological record and Mesolithic ritual activity rare, making this a site of some significance to studies of Mesolithic NW Europe.     

Early Iron Age Archer's Finger Tab from the Eastern Amur Region

The article presents the results of an examination of a stone artifact with an opening, originally described as a burnisher. The shape and use-wear analyses of this artifact suggest that it is a tab worn to protect the archer's thumb     

The elemental chemistry of lithic microwear: an experiment

This paper examines the ability of elemental analysis to distinguish microwear traces on stone tools. Our research hypothesised that cleaning procedures of experimental specimens may have heavily influenced previous studies in this area. Experimental flakes are used and cleaned by two alternative methods before laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is applied to study use-wear chemistry. The results show that elementally recognisable traces remain on stone surfaces even with severe cleaning. Also studied were archaeological sickle blades from two sites in Northern England. The results were counter-intuitive demonstrating that experimentally validated models potentially require extensive modification and clarification before being applied to archaeological material. This research identifies methodological problems and errors concerning cleaning within previous experimental studies and highlights new directions for this quantitative analytic approach in microwear analysis.     

Microwear study of quartzite artefacts: preliminary results from the Middle Pleistocene site of Payre (South-eastern France)

Preliminary functional results obtained from the quartzite assemblage of the Early Middle Palaeolithic site of Payre (South-eastern France) are presented. In an area rich in flint, hominins at Payre also collected quartzite in their local environment, specifically along the Rhône River banks. Although the Payre lithic assemblage is largely composed of flint, quartzite was introduced in the site mainly as large cutting tools knapped outside. This fact pointed out an apparently highly differential treatment of the raw material types available in the region. A major concern is to understand the reason why. Is there any functional reason for the introduction of those artefacts, perhaps to perform specific activities related to the toughness of quartzite? Or is there any functional differentiation among the various raw materials? Use-wear analysis is a useful tool for better understanding human technological choices and strategies of lithic raw material management. Before attempting to extensively apply use-wear analysis on the quartzite assemblage, we analysed a limited sample to evaluate the general surface preservation. A specific experimental programme with the same local quartzite was carried out in order to provide a reliable comparative reference for interpreting use-wear evidence on archaeological implements. Methodological difficulties related to use-wear analysis applied to quartzite artefacts are also discussed. Both Optical light microscopy (OLM) and Scanning Electron Microscopy (SEM) were employed in this study; however, interpretations were elaborated considering principally SEM micro-graphs.The analysis of the archaeological material showed a good state of preservation of the surfaces with a low incidence of post-depositional alterations. The documented use-wear allowed us to identify the active edges, the kinematics and, more rarely, the worked material. Chopping activities were documented on two large artefacts suggesting a specific utility of those tools.     

河南南阳春秋楚彭射墓发掘简报

2008年6月,南阳市文物考古研究所对一座春秋晚期楚墓(M38)进行了发掘。此墓为长方形竖穴土坑墓,墓口南北长7、东西宽5米。葬具一椁二棺,两棺并列于墓室北部。随葬器物有铜器、玉石器、皮甲等。其中铜器制作精美,种类有鼎、簠、盏、盘、匝、斗、浴缶等礼器,戈、戟、殳、镞等兵器以及车马器、工具等。墓中出土5鼎,均为盖鼎。从铜礼器和兵器上的铭文看,墓主彭射为楚国高级贵族。在该墓附近已经发现多座彭氏墓葬,此处应是彭氏家族墓地。     

Identifying stone tools used in mining,smelting, and casting in Middle Bronze Age Cyprus

Abstract

Metallurgical production sites are often difficult to identify in the archaeological record because ore beneficiation and slag processing in the past involved the use of ground stone tools that were similar to those used in other contexts to prepare cereals and foods. Analysis of the ground stone assemblage from a Middle Bronze Age copper mining and production site at Ambelikou Aletri in Cyprus provided an opportunity to distinguish industrial and domestic ground stone tools and to identify the types of tools used in different stages of metal production. A comparison of tool morphologies, raw materials, and wear and breakage patterns from Ambelikou Aletri with those from contemporary domestic contexts, suggests that distinctions in the nature and structure of industrial and domestic tool kits do exist and those distinctions have an important role to play in identifying mining, smelting, and casting sites in the future.     

Experimental protocols for the study of battered stone anvils from Olduvai Gorge (Tanzania)

Percussive activities are highly relevant in the economy of modern hunter-gatherer societies and other primates, and are likely to have been equally important during the Palaeolithic. Despite the potential relevance of percussive activities in the Early Stone Age, attempts to study battered artefacts are still rare. In order to establish protocols of analysis of battered tools, this paper pursues an interdisciplinary approach combining techno-typological, refit, use-wear and GIS studies of experimental anvils from Olduvai Gorge (Tanzania). The main aim is to classify types of damage on battered artefacts according to the percussive task performed, and hence identify patterns that can be used to interpret the Oldowan and Acheulean evidence. Our results indicate that abrasion marks on anvil surfaces are typical of nut cracking, while bone breaking leaves characteristic scars and abrasion marks on the edges of anvils. Pounding of soft materials such as meat and plants also causes battering of anvils, producing morphological and spatial patterns that can be discerned from the heavy breakage of anvils during bipolar flaking. By integrating macroscopic, microscopic and spatial analyses of experimental stone tools, this paper contributes to create a referential framework in which Early Stone Age battered artefacts can be interpreted.     

The technology of Stone Age colonization: an empirical,regional-scale examination of Clovis unifacial stone tool reduction,allometry, and edge angle from the North American Lower Great Lakes region

There is now broad consensus that the appearance of Clovis in Northeastern North America (Great Lakes, New England) represents a colonization pulse into recently deglaciated landscapes. Due to the increased resource uncertainty that comes with colonizing unfamiliar landscapes, it was hypothesized that the majority tool component of Clovis assemblages, unifacial stone tools, should have been knapped on tool blanks possessing the design properties of longevity and functional flexibility to facilitate exploration mobility and guard against the absence of toolstone sources in the new landscape. These properties are optimized by large, flat flakes, possessing large surface area relative to flake thickness. Since discarded and, at times, exhausted unifacial stone tools do not preserve the original dimensions of the blank upon which they were created – necessary items for a true test of blank morphology selection – this study presents a set of predictions for inferring whether Clovis unifacial stone tool blanks were selected for the properties of longevity and functional flexibility based on evidence that Clovis people actually capitalized on those properties. Due to the nature of Clovis unifacial stone tools, tool size was of necessity used as a proxy for tool reduction, on the grounds that smaller tools are more likely to have been resharpened than larger tools, at least in the case of unifacial flake tools. The results showed that less resharpened tools possessed flatter, less spherical shapes than the more resharpened tools, which possessed more globular, spherical shapes, suggesting Clovis foragers exploited the retouch potential afforded by the larger, flatter blanks. Edge angles showed no relationship with tool reduction, suggesting that Clovis foragers exploited the functional flexibility afforded by flatter blanks by adjusting the edge angle to be either higher or lower as needed. These results are consistent with the notion that human colonizers, who did not know the abundance or location of stone outcrops prior to settling an unfamiliar territory, not only “geared up” before leaving a stone source, but geared up as efficiently as possible by carefully selecting the blanks they chose to carry. Broader implications for such careful unifacial stone tool blank selection are discussed.