STATISTICAL EVALUATION OF THE PRESENTLY ACCUMULATED LEAD ISOTOPE DATA FROM ANATOLIA AND SURROUNDING REGIONS

Several hundred new stable lead isotope ratio determinations of ore and slag specimens from ancient mining sites throughout Anatolia and of samples of artefacts of the Chalcolithic, Bronze Age and Early Iron Age from museum collections in Turkey and the United States have been combined with the accumulated published isotope determinations of such specimens from throughout the eastern Mediterranean and Aegean regions to form a data base of nearly 1000 analyses. It is the purpose of this paper to evaluate the practical effectiveness of using this now extensive data base to discriminate between the many sources of metals throughout this region and to propose methods to enhance this discrimination. By using the full three-dimensional isotopic data in multivariate statistical treatments and by separating isotopically resolvable source groups within some of the source areas and isolating statistically outlying specimens from them, it has been possible to characterize some ore sources more precisely and compactly and thereby achieve better resolution between ore sources. It has also been possible to isolate isotopically compatible artefact groups which possibly relate to ore sources that, as yet, have not been well defined by isotopic analysis.     

IDENTIFICATION OF LEAD SOURCES BY STABLE ISOTOPE RATIOS IN BONES AND LEAD FROM POUNDBURY CAMP, DORSET

Summary. Skeletal material from the Romano-British cemetery at Poundbury Camp on the outskirts of Dorchester is remarkable for the high concentration of lead detected in the bones. In an attempt to discover whether this lead was local in origin or had been introduced in imported commodities lead isotope ratios were determined for a selection of bones. The isotope ratios indicated at least two sources for the lead. Three of the individuals tested appear to have acquired lead derived from local, British, ores while the bone from the fourth individual, a child, had a lead isotope ratio identical to ore from Laurion in Greece. The isotope ratios are so close as to indicate immigration of the child rather than importation of lead in food or wine.     

LEAD ISOTOPE APPROACH TO THE UNDERSTANDING OF EARLY JAPANESE BRONZE CULTURE

For several years, the authors have used lead isotope analysis to investigate extensively the provenance of ancient bronze or copper artifacts which had been excavated mainly from Japanese archaeological sites. The results have been published item by item in several relevant Japanese journals. This review is intended to give an account which will review the whole work relating early Japanese bronze culture to Chinese and Korean cultures through lead isotope study.     

LEAD ISOTOPE ANALYSES OF ISLAMIC POTTERY GLAZES FROM FUSTAT,EGYPT*

Lead isotope analyses have been undertaken on a group of Islamic lead‐glazed pottery artefacts from Fustat, Egypt, spanning the period from the eighth to the 14th century ad , that had previously been the subject of a comprehensive typological, chronological, petrographic and technological study. Comparison of the lead isotope ratios for the glazes with those for lead ores from Egypt, Iran, Tunisia, Anatolia, Greece, Sardinia and Spain provided information on the possible sources of the lead used in the production of the glazes. The results show that the lead used in glaze production by the Islamic potters at Fustat was most probably obtained from distant ore sources in Iran or Tunisia, Sardinia, Spain and the Taurus Mountains. Different ore sources were favoured in different periods and, to a limited extent, for different types of pottery, but at no time did the Fustat potters use the potentially more accessible Egyptian ore sources.     

CHEMICAL AND LEAD ISOTOPE ANALYSES OF GREEK LATE NEOLITHIC AND EARLY BRONZE AGE METALS

Results of a combined archaeological and analytical project of Late Neolithic/Early Bronze Age copper, bronze and lead artefacts from four distinct areas of mainland Greece are presented. The aim of the study is to understand better the stages of technological development of each region, their possible ore sources and also to assess any external contribution to or internal evolution of their metallurgy. Interesting results which could challenge the established view of Late Neolithic/Early Bronze Age metallurgy in the Greek mainland are presented.     

APPLICATION OF LEAD ISOTOPE ANALYSIS TO A WIDE RANGE OF LATE BRONZE AGE EGYPTIAN MATERIALS*

Lead isotope analysis was applied to Egyptian materials from the Late Bronze Age in order to investigate the relationship between these different materials, many of which have lead as a significant component. The galena kohls analysed can be provenanced to Gebel Zeit, a large mining site known to have been active during the period. However, the source of lead metal is different and seems to be outside Egypt, along with the source of copper. Lead‐based pigments such as lead antimonate that were used in glass and glazes seem mostly to come from Egypt, although they may well contain a component of ‘Mesopotamian’ lead. In the Predynastic period, galena from many sources is being exploited for use as kohl. However, by the Middle Kingdom (2055–1650 bc ), extraction has concentrated on one source, Gebel Zeit, perhaps reflecting increasingly centralized control and/or the use of large‐scale exploitation. It therefore appears that a complex pattern of trade in lead‐based materials was evident, with lead metal and galena being separate commodities from separate sources and treated as such.     

PROVENANCE OF ANCIENT TEXTILES—A PILOT STUDY EVALUATING THE STRONTIUM ISOTOPE SYSTEM IN WOOL*

Strontium isotopes are used in archaeology to reconstruct human and animal migration routes. We present results of a pilot study applying strontium isotope analyses to modern sheep hair as a basis for its potential use as a provenance tracer for ancient woollen textiles. Our hydrofluoric acid‐based, lipid soluble analytical protocol, also tested on a number of ancient textile fibres, allows for contamination‐free, low blank strontium isotope analysis of minimal amounts of archaeological material. ⁸⁷Sr/⁸⁶Sr ratios of decontaminated sheep hair agree well with the compositions of biologically available (soluble) strontium fractions from the respective feeding ground soils, a translatable requirement for any potentially successful provenance tracing applied to wool textiles.     

LEAD ISOTOPE CHARACTERISTICS OF THE CYPRUS COPPER ORE DEPOSITS APPLIED TO PROVENANCE STUDIES OF COPPER OXHIDE INGOTS

Nearly 200 new lead isotope analyses of sulphidic and oxidized ores from 26 copper mines on Cyprus show that the mines from different geological regions group in five distinctive isotopic groups, each with a substructure, related to the geological history of the ore formation. Comparison of lead isotope compositions of Bronze Age artefacts with these data can in many cases reveal the actual mines from which the copper for particular artefacts was obtained. The particular case of the provenance of the copper for 78 Late Bronze Age copper ‘oxhide ingots’found in Cyprus, Crete, Greece, Sardinia, Turkey and Bulgaria is discussed. The data show that all oxhide ingots so far analysed, dating to the fourteenth century BC and later, were made of copper consistent isotopically with only one mining region in the geographical north of Cyprus, and especially the Apliki mine. The study provides further evidence which supports the validity of the conventional approach to the use of lead isotope analysis for provenancing metals; this evidence is antithetical to recent suggestions of a model for the production of copper oxhide ingots which involved widespread mixing of copper from a number of ore sources throughout the Mediterranean.     

LEAD ISOTOPE AND TRACE ELEMENT ANALYSIS IN THE STUDY OF OVER A HUNDRED SOUTH INDIAN METAL ICONS*

Technical investigations were made on 130 South Indian statuary images and a few miscellaneous artefacts mostly sampled from the Government Museum, Madras, India, and from the Victoria and Albert Museum and the British Museum, UK. Lead isotope investigations were attempted on 60 of these, and compositional analysis for 18 elements on 115, using inductively coupled plasma optical emission spectroscopy; thus, for 40 objects both lead isotope and trace element analysis was done. From the isotopic and elemental framework, insights are obtained into some art-historical problems of images and artefacts of the Pre-Pallava, Pallava, Chola (i.e., Vijayalaya Chola), Later Chola (i.e., Chalukya-Chola and Later Pandya), Vijayanagara (and Early Nayaka) and Later Nayaka (and Maratha) dynasties, spanning the Early Christian era to the nineteenth century, along with a few other regional styles. Inferences are also made regarding provenance of the lead and the early use of zinc and brass in the early historic period (c. fourth century BC—fourth century AD).     

FINGERPRINTING OF ROMAN MINTS USING LASER‐ABLATION MC–ICP–MS LEAD ISOTOPE ANALYSIS*

In this paper we present data to demonstrate the applicability of laser‐ablation MC–ICP–MS isotope analysis to archaeological artefacts, in this case Roman silver coins. The technique requires no chemical preparation, does minimal damage to the sample and yields external reproducibility that is better than conventional TIMS analysis; ²⁰⁷Pb/²⁰⁶Pb =±0.015% 2σ in comparison with ²⁰⁷Pb/²⁰⁶Pb =±0.04% 2σ, respectively. We show that Pb isotope compositions give isotope fingerprints to mints despite the likely reworking of the metal during coin production.     

A LEAD ISOTOPE DATABASE: THE LOS PEDROCHES – ALCUDIA AREA (SPAIN); IMPLICATIONS FOR ARCHAEOMETALLURGICAL CONNECTIONS ACROSS SOUTHWESTERN AND SOUTHEASTERN IBERIA*

One hundred and twenty‐five new lead isotopic analyses on galena, mainly from the Los Pedroches – Alcudia Valley area of southern Iberia, are presented. These data allow us to define four compositional groups in the ²⁰⁷Pb/²⁰⁶Pb versus ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb versus ²⁰⁶Pb/²⁰⁴Pb diagrams. Group I compositions are intermediate between those previously reported for southeastern and southwestern Iberian ore mineral locations. The compositions of Group II, the largest group, overlap with ore data from southwestern Spain. Groups III and IV have compositions that have never before been identified in this region and are comparable to those from the Sardinian Cu ores, which might explain the previously assumed exotic origin for local Bronze Age artefacts.     

TECHNOLOGY AND PROVENANCE OF A COLLECTION OF ISLAMIC COPPER‐BASED OBJECTS AS FOUND BY CHEMICAL AND LEAD ISOTOPE ANALYSIS*

Chemical and lead isotope analyses were utilized to determine the composition, technology and origin of a collection of Islamic copper‐based objects found in Jordan. The atomic absorption spectrometry results show that the objects were made of different types of copper‐base alloys that contain various amounts of zinc, tin and lead. The use of brass, highly leaded brass and quaternary alloys of Cu‐Zn‐Sn‐Pb in the manufacture of everyday, household objects strongly points to Islamic traditions. The lead isotope compositions of the objects match very well that of the copper ore mined from the Dolomite‐Limestone‐Shale unit of the Arabah copper mines.