Testing Area‐Scale Fractal Complexity (Asfc) and Laser Scanning Confocal Microscopy (LSCM) to Document and Discriminate Microwear on Experimental Quartzite Scrapers

Few microwear studies have been conducted on tools made from quartzite. Most rely on visual observation of microwear features using optical light microscopes and scanning electron microscopes. Quantification of microwear on quartzite tools is extremely rare, even though numerous methods to mathematically document surface roughness have been applied to other silicate tools. In this paper, laser scanning confocal microscopy (LSCM) was used to document surface roughness on four experimental scrapers made from two different subtypes of Mistassini quartzite that were used on either fresh or dry deer hide. Surface roughness data were analysed using area‐scale fractal complexity (Asfc). The results of this test case indicate that Asfc can effectively discriminate between the unused and used regions on the quartzite tools based on surface roughness, and that it can also discriminate between surface roughness produced by working dry versus fresh hides. Differences in the subtypes of Mistassini quartzite did affect surface roughness, but not significantly enough to prevent discrimination of the dry and fresh hide‐working tools. Although the use of the Asfc parameter for lithic microwear analysis requires further testing, these first results suggest it could be a reliable technique to mathematically document and discriminate wear patterns on archaeological quartzite tools.     

Microwear analysis of experimental flint tools: a test case

Recent attempts to infer the functions of prehistoric stone tools have centred on the study of microscopic traces of wear on the surfaces of these tools. One method of “microwear analysis” involving high magnification and an incident light microscope is tested in this paper. Modern flint tools made and used in ways thought relevant to prehistory were produced by a lithic technologist and after cleaning given to the microwear specialist who attempted to infer their use. A high degree of agreement between inferred and actual uses was achieved and this encouraging result has important implications for the study of microwear on prehistoric tools where no such independent check is available.     

Experimentation in the Formation of Edge Damage: A New Approach to Lithic Analysis

Abstract

The paper describes a series of experiments recently carried out to test the formation of edge-damage on flaked stone tools which results from their being used in various tasks. Variables that were systematically tested include action, worked material, angle of the edge, and grip. The main criterion in distinguishing different patterns of damage was microflaking rather than abrasion in the form of striations and polish.

The results of these experiments may be applied to the identification of patterns of damage to the edges of prehistoric stone tools. The information gained from such microwear analysis may be used not only to provide details on the activities and settlement organization of prehistoric societies, but also to provide an important new dimension to lithic analysis in general. In lithic analysis, the main criteria of change have been the macromorphological features of the tools. It is our contention, however, that the additional information on the function of the tools, which is provided by microwear analysis, can contribute to the greater understanding of the processes of change in lithic assemblages and culture change as a whole.

The experimental program was designed to test the formation of edge-damage on implements manufactured in European chalk flint. It was to aid in the identification of wear patterns on lithic assemblages from the neolithic period in Central and Eastern Europe, a project in which the authors were involved. Its relevance, however, includes directly those assemblages of the post-Pleistocene period in temperate and Mediterranean Europe. The results of the experiments may also be useful, it is hoped, for lithic analysis in general, both in the Old and New World.     

Dental Microwear and Diet in Domestic Sheep (Ovis aries) and Goats (Capra Hircus): Distinguishing Grazing and Fodder-fed Ovicaprids using a Quantitative Analytical Approach

In recent years, dental microwear analysis has attracted considerable interest as a potential method for reconstructing ancient diet. This article presents results from research exploring the potential of dental microwear analysis in the reconstruction of domestic ungulate diet through the quantitative analysis of diet-microwear relationships in modern grazing and fodder-fed sheep and goats. Diet-related microwear patterning is identified in the modern populations examined and it is concluded that with investigation of a wider range of modern diets, dental microwear analysis will emerge as a valuable and insightful approach for the investigation of diet in ancient livestock.     

Recent developments in the analysis of lithic artifacts

A review of recent research on lithic technology and functional analysis is presented. Our perception of the state of the art is based on a review of the literature published during the past three years and on the topics that were covered at conferences and workshops on lithic analysis. While the goals have essentially remained the same since the turn of the century, concerns with chronology and the classification of lithic artifacts have given way to studies that treat stone implements as products of a dynamic system of human behavior. In order to understand stone artifacts and the people that made and used them, archaeologists must understand theprocesses involved in the acquisition, production, exchange, and consumption of lithic artifacts. In the past ten years, experimental studies involving the manufacturing and use of stone tools have been integrated with studies of refitted or conjoined lithic artifacts and microwear analysis. The result is a much more dynamic view of the variability in assemblages of lithic artifacts. In this review, we focus on replication and technological analysis of chipped stone artifacts and microwear analysis, and consider the implications of this research.     

A dental microwear study of seaweed‐eating and grazing sheep from Orkney

The potential of dental microwear for recognizing the use of seaweed as fodder in the past is explored through the analysis of microwear patterning in modern seaweed‐eating and grazing sheep from Orkney. Seaweed‐eating and grazing sheep are clearly distinguished on the basis of microscopic dental wear patterns. This reflects an emphasis on anterior‐posterior jaw movements and large pitted features in the seaweed‐eaters and can be attributed to the differing forces and/or masticatory movements required in the comminution of grasses and seaweed. Differences between seaweed‐eating and grazing individuals are maintained when the grazing group is expanded to include grazing sheep from Greenland and the Scottish borders. It is concluded that the microwear of seaweed‐eating sheep is highly distinctive and that dental microwear analysis potentially has a widespread application for identifying seaweed grazing within Scotland and the North Atlantic islands. Copyright © 2000 John Wiley & Sons, Ltd.     

News and Commentary on the Illicit Traffic in Antiquities

Abstract

The results of a high-power microwear analysis of stone artifacts from the Magdalenian site at Verberie, France, are reported in this study. Both retouched and unretouched implements were examined, and the various use-wear traces that were found are briefly discussed. The relationship between tool morphology and function, the use of unmodified lithic artifacts, and microwear traces indicative of hafting are described. In addition, some hypotheses are advanced regarding specific activity areas at the site. It is concluded that the unretouched component of the lithic industry comprised a large part of the Magdalenian toolkit at Verberie.     

Patterns of dental wear in the early Maori dentition

The levels of tooth wear were surveyed in 50 pre‐contact Maori skulls (23 of them female) from New Zealand. In addition to a generalized tooth wear index, we evaluated occlusal wear for erosion and abrasion. Occlusal microwear was also investigated using scanning electron microscopy (SEM) images and, finally, the occlusal slope was determined at the level of the first molar teeth. The general pattern of wear was one of severe occlusal reduction with no significant differences between males and females. Both silicone impressions and SEM views confirmed a large component (30%) of erosion. While most individuals had flat wear planes, 33% of males and 44% of females showed reversed Monson's curves. Accentuated Monson's curves were found in 23.8% of males. While these results confirm early studies of the excessive wear experienced by pre‐contact Maori, our study shows for the first time that erosion played a significant role in the dental wear of these people. Copyright © 2001 John Wiley & Sons, Ltd.     

Scanning electron microscopy of dry hide working tools: The role of abrasives and humidity in microwear polish formation

This paper presents the results of the scanning electron microscopy of a series of experimental tools designed to investigate the role of abrasive agents and humidity in microwear polish formation. The tools—35 end scrapers—were divided into four groups and used to work dry hide. It was found that both humidity and abrasive agents are two basic variables in the development of the microwear polish.     

Use-wear analysis of obsidian artifacts from Later Stone Age shell midden sites on the Red Sea Coast of Eritrea,with experimental results

This paper presents results of use-wear study on lithic artifacts from two Later Stone Age sites (Gelalo and Misse) on the Red Sea Coast of Eritrea. The sites produced large quantities of lithic artifacts in association with mollusk shells and ostrich eggshell beads, but it is unclear if all the stone tools were required for bead and mollusk shell processing. The study involved recording of microfracture damage traces in order to infer the use-material and the manner in which the artifacts were used. A large percentage of the analyzed samples from Gelalo and Misse preserve wear patterns suggestive of human use. The diagnostic wear types include: (1) dense step, snap (crushing) and hinge fractures typically confined on the working edges, and (2) feather scars organized in a scalar manner visible on the ventral and dorsal surfaces of the active parts. The observed damage patterns suggest cutting and engraving medium to hard materials. The evidence is incomplete for more generalization about the specific activities carried out at the sites. A brief experimental study involving ostrich eggshell drilling, oak twig sawing and bark scraping, meat slicing, and mollusk shell sawing and drilling was carried out to aid interpretation of wear features observed on the archaeological specimens. Wear traces produced by sawing mollusk shell and oak wood showed close affinity to those observed on the archaeological specimens. The study contributes important information about early Holocene site use on the Red Sea Coast of Eritrea. The close association of used lithic artifacts, symbolic objects (beads) and broken shell remains indicates that the sites were habitation areas.     

Dental microwear study of pigs from the classical site of Sagalassos (SW Turkey) as an aid for the reconstruction of husbandry practices in ancient times

Abstract

Microwear analysis of pig teeth from the classical site of Sagalassos (SW Turkey) is undertaken to obtain insight into pig management strategies in this region from the 1st to 7th centuries AD. Earlier research on modern pigs revealed significant differences in microwear patterns between stall-fed and free-ranging, rooting individuals. A comparison of the microwear data of the Sagalassos pig with those from archaeological and modern pigs with a known or presumed type of management shows that the microwear of the Sagalassos pigs is very different. It is suggested that the Sagalassos pigs had a very soft, non-abrasive diet, that in the first instance cannot be attributed to either management type. Therefore, the nature of the substrate on which the animals were foraging and its impact on microwear are considered and the microwear data are compared with the results of previous archaeozoological research carried out at the site. Further, diachronic changes in microwear patterns are investigated.     

The Lower Palaeolithic on the northern plateau of the Iberian Peninsula (Sierra de Atapuerca,Ambrona and La Maya I): a technological analysis of the cutting edge and weight of artefacts. Developing an hypothetical model

This article analyses the relationship between the weight and cutting edge of lithic artefacts from the main Lower Palaeolithic sites on the northern plateau (Meseta) of the Iberian Peninsula. The weight and cutting edge of a tool determine its cutting ability and the amount of force it is capable of, making them extremely important aspects of study to further our understanding of the potential capacity for human intervention in the environment. However, the analysis of these features has not received much attention in the ongoing debate on the Palaeolithic era in Europe. This study argues that the quantitative and qualitative technological analysis of these two aspects is of fundamental importance in determining the potential of lithic assemblages.     

Identifying the woody resources of Diepkloof Rock Shelter (South Africa) using scanning electron microscopy of the MSA wood charcoal assemblages

This article presents the results of the anatomical identification of wood charcoal from pre-Still Bay, Still Bay and Howiesons Poort assemblages at Diepkloof Rock Shelter (South Africa) using scanning electron microscopy. In the earliest phases, with pre-Still Bay stone tools, the charcoal shows a predominance of Afromontane forest taxa, some riverine woodland species, mesic thicket and proteoid fynbos vegetation. With a change in lithic technology in Still Bay contexts, the balance of Afromontane and thicket taxa shifts towards favouring the latter. A more diverse array of proteoid fynbos species emerges, and there is evidence for the use of plants from the local wetlands of the Verlorenvlei. In Howiesons Poort contexts, typified by a different lithic technology, the charcoal shows some Afromontane forest persisting, but the overwhelming change is towards greater species diversity, with the woody taxa being increasingly representative of thicket and shrubland. Some of the fynbos and thicket species are typical of vegetational communities which inhabit well-drained soils, rocky or dry locations at the present day. More wetland plants from the Verlorenvlei were selected for use.     

Is there a future for the past? An overview of archaeology in western Russia and Ukraine

The current political and economic situation in Russia and Ukraine poses grave dangers for the archaeological and museum professionals who guard these nations' legacies. At the moment that political barriers to Western collaboration were removed, new problems have crippled the post-Soviet archaeological community. Concurrently, Westerners tend to misunderstand Soviet and post-Soviet archaeological theory, forgetting that techniques such as lithic microwear and taphonomic analysis were introduced by Soviet scholars. New discoveries are described in three general categories: the origins of food-producing economies in western Russia and Ukraine, the evolution of surprisingly large towns in Copper Age Ukraine, and the origins of pastoralism in the Russian and Ukrainian steppes.     

Dietary ecology of extant guanaco (Lama guanicoe) from Southern Patagonia: seasonal leaf browsing and its archaeological implications

The analysis of dietary traits of ungulates through tooth microwear and mesowear has been applied to archaeological sites to investigate seasonal changes in settlements by hunter–gatherers. In this paper we propose to test the hypothesis that tooth microwear (combined to mesowear) is able to indicate seasonality in the diet of extant ungulates in arid habitats (semi-deserts or steppe). The material analyzed comes from six faunal monospecific assemblages of guanaco (Lama guanicoe) resulting from a mass mortality event in winter 2000 near the Cardiel Lake in Southern Patagonia (Province of Santa Cruz, Argentina). Mesowear results indicate that the guanacos from the Cardiel Lake area are mixed feeders, and thus, have a diet that shifts seasonally. Moreover, microwear analysis supports the hypothesis that tooth microwear is able to indicate seasonality in the diet of extant guanaco in arid habitats. The pattern is clear for the winter sample and needs to be confirmed for a summer sample. Consequently, tooth microwear is proposed as a new potential proxy for detecting seasonal occupation in archaeological sites in Patagonia and other arid environments.     

The elemental chemistry of lithic microwear: an experiment

This paper examines the ability of elemental analysis to distinguish microwear traces on stone tools. Our research hypothesised that cleaning procedures of experimental specimens may have heavily influenced previous studies in this area. Experimental flakes are used and cleaned by two alternative methods before laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is applied to study use-wear chemistry. The results show that elementally recognisable traces remain on stone surfaces even with severe cleaning. Also studied were archaeological sickle blades from two sites in Northern England. The results were counter-intuitive demonstrating that experimentally validated models potentially require extensive modification and clarification before being applied to archaeological material. This research identifies methodological problems and errors concerning cleaning within previous experimental studies and highlights new directions for this quantitative analytic approach in microwear analysis.     

Some Preliminary Observations on Subsurface Damage on Experimental and Archaeological Quartz Tools using CLSM and Dye

Lithic use-wear analysis mainly deals with use-wear features which can be observed on the surface of stone tools but a major part of the wear of brittle material is found under the surface. This wear might also be a clue to the interpretation of archaeological stone tools. In this paper we try to examine subsurface damage on experimental and archaeological quartz tools by dying them with fluorescent colour and scanning them with a CLSM. This method shows that various worked materials cause different subsurface damage, which is related to the hardness of the worked material.     

A crossbeam co-ordinate caliper for the morphometric analysis of lithic nuclei: a description,test and empirical examples of application

Over the last four decades, there has been surprisingly little advance in the quantitative morphometric analysis of Palaeolithic stone tools, especially compared to that which has taken place in biological morphometrics over a comparable time frame. In Palaeolithic archaeology's sister discipline of palaeoanthropology, detailed quantitative morphometric, geometric morphometric, and even 3D geometric morphometric analyses are now seen almost as routine. This period of relative methodological stasis may have been influenced by the lack of homologous landmarks on many lithic tools (essential for any comparative analysis), especially core-based technologies of the Lower Palaeolithic. Archaeological field conditions may also prohibit the use of expensive and delicate precision instruments in certain cases. Here we present a crossbeam co-ordinate caliper that – crucially – both geometrically locates and measures distances between morphologically homologous landmarks upon lithic nuclei via a single protocol. Intra- and inter-observer error tests provide evidence that error levels associated with the instrument fall within acceptable ranges. In addition, we present empirical examples of application in the form of a multivariate analysis of 55 discrete morphometric variables, and a 3D geometric morphometric analysis of co-ordinate landmark configurations derived from Pleistocene lithic nuclei (i.e. ‘cores’ sensu lato). We also introduce to lithic studies some techniques for the study of shape variation that have previously been used with success in biological morphometric analyses. We conclude that use of an instrument such as the crossbeam co-ordinate caliper may provide a useful adjunct to traditional techniques of lithic analysis, particularly in developing a quantitative morphometric approach.     

Blind tests shed light on possibilities and limitations for identifying stone tool prehension and hafting

Prehensile wear has never formed the focus of a blind test in microwear studies and doubts remain about the formation, identification and interpretation of diagnostic prehension and hafting wear. The results of the presented blind tests demonstrate that prehension and hafting traces do form and that their formation is sufficiently systematic and patterned to allow valid and reliable interpretations. A combined approach, involving macroscopic, low power and high power analyses, is suggested as the most meaningful approach for consistent inferences.