Evaluation of Fe isotope values as a provenance tool for chert artefacts from the north-eastern United States

Iron (Fe) isotope compositions of prehistoric stone tools and geological sources were compared to evaluate the robustness of this isotopic fingerprinting technique. Artefacts and source materials were collected from the Hatch site in central Pennsylvania, United States, where both veined chert (Bald Eagle chert) and stone tools coexist within several metres. Yellow artefacts (δ⁵⁶Fe = 0.38 ± 0.1, n = 7) and source materials (δ⁵⁶Fe = 0.42 ± 0.1, n = 8) isotopically matched within error. The source values also overlap yellow chert samples from three other Bald Eagle chert locations in the area. These values are different from six other chert locations in the north-eastern United States. These data suggest that the Fe isotope composition of chert artefacts reflect distinct geological sources. To enhance the mechanical characteristics of the stone tools, the chert experienced heat treatment, which induced a phase shift of the Fe oxide mineral goethite to hematite. This phase shift changes the colour of the chert to red. The red chert artefacts and source material also have overlapping Fe isotope values, but are 0.2‰ higher than the initial yellow chert. Experimental work where cherts were heated with different clays shows that Fe exchange with site soils induces the +0.2 fractionation. These data demonstrate that predictable Fe isotope fractionation occurs during heating, resulting in isotopically distinct artefacts.     

THE PROVENANCE OF IRON ARTEFACTS FROM MANCHING: A MULTI‐TECHNIQUE APPROACH*

Iron finds from the Celtic oppidum of Manching in southern Bavaria (Germany) are analysed in view of their possible provenance. The exceptional size and the location of Manching are usually attributed to the presence of abundant iron ores in its vicinity. After a review of previous approaches for source determination of iron artefacts, we introduce lead isotope analysis as a new approach. However, only by combining the trace element patterns of slag inclusions and iron metal with lead isotope ratios in the metal is it possible to distinguish various iron ore formations near Manching. As a result, it turns out that, indeed, the most obvious ones—namely, bog ores near the Danube—constituted the main resources for iron production at Manching. It was even possible to select one occurrence as the most likely ore source.     

Tracing Medieval and Renaissance Alabaster Works of Art Back to Quarries: A Multi‐Isotope (Sr,S, O) Approach

Multi‐isotope fingerprinting (sulphur, oxygen and strontium isotopes) has been tested to study the provenances of medieval and Renaissance French and Swedish alabaster works of art. Isotope signatures of historical English, French and Spanish alabaster source quarries or areas are revealed to be highly specific, with a strong intra‐group homogeneity and strong inter‐group contrasts, especially for Sr and S isotopes. The chosen combination of isotope tracers is a good basis for forensic work on alabaster provenance, allowing verification of hypotheses about historical trade routes as well as identification of fakes and their origin. The applied analytical techniques of continuous flow isotope ratio mass spectrometry (CF–IRMS) and thermal ionization mass spectrometry (TIMS) only require micro‐samples in the low‐milligram range, thus minimizing the impact on the works of art.     

How Did Mississippians Prepare Maize? The Application of Compound‐Specific Carbon Isotope Analysis to Absorbed Pottery Residues From Several Mississippi Valley Sites

A newly developed compound‐specific stable carbon isotope technique allows the detection of maize in absorbed organic pottery residues. This method was applied to absorbed organic residues from a variety of Mississippi Valley potsherds, and successfully identified maize components. Maize was cooked in sampled vessels less often than expected, but otherwise fitted expected patterns of maize use derived from stable carbon isotope analysis of human bone from the region. Absorbed organic pottery residue analysis is useful in determining pottery use, particularly in concert with other analytical methods.     

Application of Kernel Density Estimates to Lead Isotope Compositions of Bronzes from Ningxia,North‐West China

The aim of this paper is to apply kernel density estimates (KDEs) to the visualization and interpretation of lead isotope data from bronze assemblages found along the northern border of central China, here designated as the Arc. New lead isotope analyses of 30 leaded tin–bronze artefacts from the Wangdahu cemetery (c.500–300 bc ) in the Ningxia Hui Autonomous Region, north‐west China, provide the basis for the discussion. By using multivariate KDEs and the calculated likelihood of the overlap, the present work shows that the Wangdahu objects feature a unique linear array of isotope ratios, representing an important element of overall bronzes from the Arc in the first millennium bc . This characteristic isotope signature is fundamentally different from that of Dajing ores in north‐east China, as well from that of early Qin bronzes in Shaanxi and Gansu provinces. This suggests that a variety of metal resources were utilized by peoples living in the Arc. The KDE approach thus proves effective at presenting and comparing lead isotope data.     

OXYGEN AND CARBON ISOTOPE ANALYSIS OF HUMAN DENTAL ENAMEL FROM THE CARIBBEAN: IMPLICATIONS FOR INVESTIGATING INDIVIDUAL ORIGINS

This study explores the potential of carbon and oxygen isotope data from human enamel carbonate (n = 50) to contribute to mobility studies in the Caribbean. Most oxygen and carbon isotope results display limited variation, with substantial overlap between islands. However, a few individuals from El Chorro de Maíta, Cuba possess relatively low δ¹⁸O and high δ¹³C. Two of these individuals were previously identified as possible non‐Antillean immigrants on the basis of strontium isotopes, and bioarchaeological and mortuary evidence. The carbon and oxygen isotope results provide additional evidence supporting the proposed non‐local origins of these individuals and contribute to explorations of their potential natal origins.     

The Use of Strontium Isotope Analysis to Investigate Tiwanaku Migration and Mortuary Ritual in Bolivia and Peru

Strontium isotope analysis is applied in South America for the first time in order to investigate residential mobility and mortuary ritual from ad 500 to 1000. While Tiwanaku‐style artefacts are spread throughout Bolivia, southern Peru and northern Chile during this time, the nature of Tiwanaku influence in the region is much debated. Human skeletal remains from the site of Tiwanaku and the proposed Tiwanaku colony of Chen Chen have been analysed to test the hypothesis that Tiwanaku colonies, populated with inhabitants from Tiwanaku, existed in Peru. Strontium isotope analysis supports this hypothesis by demonstrating that non‐local individuals are present at both sites.     

TRACING THE RESOURCES OF IRON WORKING AT ANCIENT SAGALASSOS (SOUTH‐WEST TURKEY): A COMBINED LEAD AND STRONTIUM ISOTOPE STUDY ON IRON ARTEFACTS AND ORES*

Lead and strontium isotope analyses were performed by thermal ionization mass spectrometry (TIMS) on Roman to Byzantine iron artefacts and iron ores from the territory of ancient Sagalassos (south‐west Turkey), to evaluate Pb and Sr isotopes for provenance determination of ores for local iron production. It can be demonstrated that for early Roman artefacts and hematite iron ore processed in early Roman times from Sagalassos proper, as well as for magnetite placer sands and early Byzantine raw iron from the territory of the city, Sr isotopes are much less ambiguous than Pb isotopes in providing clearly coherent signatures for ore and related iron objects. Late Roman iron objects were produced from iron ores that as yet remain unidentified. Early Byzantine iron artefacts display more scatter in both their Pb and Sr isotope signatures, indicating that many different ore sources may have been used. Our study demonstrates that iron objects can be precisely analysed for their Sr isotopic composition, which, compared to Pb isotopes, appears to be a much more powerful tool for distinguishing between chronological groups and determining the provenance of raw materials.     

LEAD ISOTOPE CHARACTERISTICS OF THE CYPRUS COPPER ORE DEPOSITS APPLIED TO PROVENANCE STUDIES OF COPPER OXHIDE INGOTS

Nearly 200 new lead isotope analyses of sulphidic and oxidized ores from 26 copper mines on Cyprus show that the mines from different geological regions group in five distinctive isotopic groups, each with a substructure, related to the geological history of the ore formation. Comparison of lead isotope compositions of Bronze Age artefacts with these data can in many cases reveal the actual mines from which the copper for particular artefacts was obtained. The particular case of the provenance of the copper for 78 Late Bronze Age copper ‘oxhide ingots’found in Cyprus, Crete, Greece, Sardinia, Turkey and Bulgaria is discussed. The data show that all oxhide ingots so far analysed, dating to the fourteenth century BC and later, were made of copper consistent isotopically with only one mining region in the geographical north of Cyprus, and especially the Apliki mine. The study provides further evidence which supports the validity of the conventional approach to the use of lead isotope analysis for provenancing metals; this evidence is antithetical to recent suggestions of a model for the production of copper oxhide ingots which involved widespread mixing of copper from a number of ore sources throughout the Mediterranean.     

FINGERPRINTING OF ROMAN MINTS USING LASER‐ABLATION MC–ICP–MS LEAD ISOTOPE ANALYSIS*

In this paper we present data to demonstrate the applicability of laser‐ablation MC–ICP–MS isotope analysis to archaeological artefacts, in this case Roman silver coins. The technique requires no chemical preparation, does minimal damage to the sample and yields external reproducibility that is better than conventional TIMS analysis; ²⁰⁷Pb/²⁰⁶Pb =±0.015% 2σ in comparison with ²⁰⁷Pb/²⁰⁶Pb =±0.04% 2σ, respectively. We show that Pb isotope compositions give isotope fingerprints to mints despite the likely reworking of the metal during coin production.     

FROM SUSA TO ANURADHAPURA: RECONSTRUCTING ASPECTS OF TRADE AND EXCHANGE IN BITUMEN‐COATED CERAMIC VESSELS BETWEEN IRAN AND SRI LANKA FROM THE THIRD TO THE NINTH CENTURIES AD*

In contrast with artefactual studies of long‐distance trade and exchange in South Asia during the Prehistoric and Early Historic periods ( Ardika et al. 1993 ; Gogte 1997 ; Krishnan and Coningham 1997 ; Tomber 2000 ; Gupta et al. 2001 ; Ford et al. 2005 ), few scientifically orientated analyses have focused on artefacts from the region's Historic period. During excavations at the ancient city of Anuradhapura, Sri Lanka, a number of buff ware ceramics with a putative organic coating on the interior were recovered ( Coningham 2006 ). Dated stylistically to between the third and ninth centuries ad , analysis of the coatings using gas chromatography–mass spectrometry (GC–MS) and stable isotope analysis (carbon and deuterium) confirmed that the coatings are bitumen—an organic product associated with petroleum deposits. There are no known bitumen sources in Sri Lanka, and biomarker distributions and isotopic signatures suggest that the majority of the samples appear to have come from a single bitumen source near Susa in Iran. The relationship between the bitumen coatings and the vessels is discussed, and it is suggested that the coatings were used to seal permeable ceramic containers to allow them to transport liquid commodities. This study enhances our knowledge of networks of trade and exchange between Sri Lanka and western Asia during Historic times.     

ACCESSORY MINERALS AS TRACERS IN THE PROVENANCING OF ARCHAEOLOGICAL MARBLES,USED IN COMBINATION WITH ISOTOPIC AND PETROGRAPHIC DATA*

Thirty‐eight archaeological marbles (Roman and medieval) from Modena and Reggio Emilia (northern Italy) were provenanced using the accessory minerals as tracers and the results were compared with those inferred for the same artefacts using isotope composition and MGS (maximum grain size of calcite grains). The number of inferred possible sources is generally lower when using the mineralogical method, which therefore seems to be suited to marble provenancing.     

Stable carbon isotope analysis of human tooth enamel from the Bronze Age cemetery of Ya'amoun in Northern Jordan

Seventy-five teeth from the Bronze Age cemetery of Ya'amoun were sampled for carbon isotope analysis. The sampled teeth represented the transitional period of the Middle/Late Bronze Age. The results showed that the components of the diet that are reflected in the carbon isotope data remained the same during this period with an average δ¹³C of about −11.87‰. This value reflects more C₃ plant consumption.     

A Note on Iron Age Figural Artefacts from Tell Dothan

ABSTRACT

Tell Dothan, located just 10 kilometers from modern-day Jenin, was excavated by Joseph P. Free for 10 seasons between 1953–1964 (Figure 1). During the course of these excavations, Free recovered numerous figurines and figural artefacts. The study of figural artefacts in the southern Levant in the last two decades has received renewed interest with re-examinations of well-known traditions (for a recent and interesting reinvestigation of the Iron Age Judean Pillar Figurines, see Darby 2014), closer attention to the production processes (e.g., Ben Shlomo 2010; Darby 2014; Kletter, et al. 2010), and discussions about the uses and functions of these curious objects. The present article presents only those from the Iron Age with attention to their spatial distribution in order to contribute to the understanding of the archaeological remains at the site. At the same time, the Iron Age collection from Dothan is important not only because it supplements the growing number of published figural artefacts from the southern Levant, in particular from the lesser-explored regions of the modern-day West Bank, but because it textures the interpretation of the architecture at tell Dothan, itself.     

Spartan dependence on Laurion lead

This article presents contextual evidence for the interpretation of lead isotope analysis (LIA) of artefacts from the Archaic Greek Mediterranean. In particular, I make a response to Wood’s suggestion in Archaeometry (2022, first view, ‘Other ways to examine the finances behind the birth of Classical Greece’) that the end of the production of lead votive figurines in Sparta might have been caused by Athenian restrictions to Laurion lead exports, drawing on new LIA of the Spartan lead votives and wider considerations concerning the trade, cost and volume of lead in the 7th to 5th century bce Mediterranean.     

In Search of the Social: Steamboats, Square Wheels, Reindeer and Other Things

This paper examines the concept of the ‘social,’ particularly from an archaeological perspective, and explores how it relates to the ways in which we seek to understand the processes of technological innovation and change. It is demonstrated that the concept ‘social’ is far from well defined and that enquiry is bedevilled by artificial polarization between subject-centred approaches and object-centred particularism. Through the medium of early United States steamboat technology a different approach is forged through the melding of people and things with the idea of viewing artefacts as active social actors along with people. Ultimately, it is argued that maritime archaeologists should be more bullish in their approaches to material things—instead of adopting social theories ‘wholesale,’ we should insist that they include the things we study: boats, material objects, people, artefacts, landscapes and animals.     

Policing intercultural encounters: adventures in Beijing

This article reflects on the notion that China is viewed in the West as a site of absolute cultural Otherness, and contributes to debates around the manner in which Euro-Chinese intercultural interaction is imagined in European thought. Adopting a perspective inflected by Foucault's representation of disciplinary power, and by critical work pursued in the field of Contact-Studies, it scrutinises European cultural artefacts that map Beijingese space, and the adventures in that space of the European subject. These artefacts, which deal with different Beijings, are Victor Segalen's Rene´ Leys; Pierre-Jean Remy's Le Sac du Palais d'E´te´; and Christian Garcin's Le Vol du pigeon voyageur. The essay shows that the novels defy our expectation that variant ‘distillations’ of China—Imperial, Republican, post-Maoist—might invite different representations. And it concludes that the novels examined evince a European desire not to represent Beijing, and China, as a zone of transcultural contact.     

Isotopic evidence for Middle Horizon to 16th century camelid herding in the Osmore Valley,Peru

Archaeological and zooarchaeological data indicate that camelid pastoralism was a subsistence and economic mainstay of Middle Horizon and more recent cultures in the Osmore region of southern Peru. However, it is not known whether camelids were primarily herded in highland puna pastures or near lower elevation sites in the middle valley or along the coast. This research examines the elevation of archaeological camelid herding in the Osmore Valley using stable isotope analysis. Stable carbon (δ¹³C) and nitrogen (δ¹⁵N) isotope ratios were measured on 28 archaeological camelid bone samples from the Middle Horizon sites of Cerro Baúl and Cerro Mejía, the Late Intermediate site of Yaral and the late pre‐Hispanic to Colonial period site of Torata Alta. Twenty‐three archaeological camelids have δ¹³C and δ¹⁵N values similar to five modern camelids maintained in highland puna pastures. In contrast, three camelids from the high status Wari site of Cerro Baúl, and two from Yaral have unexpectedly high δ¹³C and/or δ¹⁵N values outside the expected range for camelids pastured in highland puna habitats. The results may be explained by differences in foddering practices, altitudinal herding range or climatic conditions. Strontium isotope ratios (⁸⁷Sr/⁸⁶Sr) were also assessed to infer pasture elevation using the camelid remains from Cerro Baúl (n = 11). One individual in this sub‐sample exhibits a non‐local ⁸⁷Sr/⁸⁶Sr value indicative of an origin in the highland puna region east or south of Lake Titicaca. It was not possible to further distinguish between camelids herded in lower to middle elevation habitats outside the Lake Titicaca basin using ⁸⁷Sr/⁸⁶Sr values. This study suggests that multiple isotope proxies may be used to identify animals primarily pastured in lowland coastal versus highland puna (> 4000 masl (meters above sea level)) habitats, but are less useful at distinguishing between animals pastured in lower to middle elevation settings. Copyright © 2010 John Wiley & Sons, Ltd.     

MATTER(S) OF INTEREST: ARTEFACTS, SPACING AND TIMING

This paper argues that time‐geography can make a contribution to contemporary ‘rematerialized’ geographies, because the interconnections among social processes, human corporeality and inanimate material artefacts within the landscape were among Hägerstrand's central concerns. Time‐geography needs none the less to be extended in several ways to make it more reconcilable with current thinking about materiality in geography. The possibility of combining Hägerstrand's framework with notions from (post) actor‐network approaches is therefore explored. It is suggested that concepts and notions from the latter may contribute to the advancement of the conceptualization of action at a distance and agency in general in time‐geography, as well as the incorporation of the immaterial realm into space—time diagrams. The resulting materially heterogeneous time‐geography is a framework for studying the spacing and timing of different material entities that is sensitive to the role of artefacts and their local connectedness with other material forms. Some of its elements are illustrated briefly through an empirical study of the roles played by a few mundane artefacts in working parents ‘coping with child‐care responsibilities on working days. The case study suggest that these artefacts not only enable goal fulfilment and routinization but also result in further spacing and timing practices, and can introduce uncertainty and novelty to existing orders.