Middle Bronze Age II Battleaxes from Rishon LeZion,Israel: Archaeology and Metallurgy

Thirteen bronze battleaxes from Middle Bronze Age II graves at Rishon LeZion, Israel were analysed by ED XRF at multiple surface locations in order to determine their metallurgical composition. Six of these were further subjected to neutron diffraction using an ENGIN‐X diffractometer in order to determine bulk phase composition. The results indicate that the previously established geographical and chronological variability in Sn–Cu (with occasional Pb) and As–Cu alloys found using the former method may be an artefact of preservation and conservation. In addition, the varying homogeneity determined by the latter reflects special treatment for improving on the metal cast.     

Middle Bronze Age metallurgy in the Levant: evidence from the weapons of Byblos

This paper constitutes a synthesis of a technological investigation on copper base alloy weapons from Byblos. Most of the weapons are typical of the Middle Bronze Age in the Levant. Methods such as metallographic examination and chemical analyses by EDS were used to identify the different stages of the chaîne opératoire used in the making of these weapons. The results reveal precise information regarding the production of several types of weapons such as the type and performance of the moulds used for casting and the deformation process. Furthermore, these results highlight the contribution of economic and cultural factors in the choice of components in a copper base alloy recipe. Finally, the use of silver–copper brazes for joining copper base alloy objects is recorded for the first time for the period and region concerned.     

Copper quality and provenance in Middle Bronze Age I Byblos and Tell Arqa (Lebanon)

Forty-four Middle Bronze Age I weapons discovered at the sites of Byblos and Tell Arqa in Lebanon were investigated in order to study their copper quality and provenance. The evaluation of copper qualities is based on quantifying permanent inclusions such as copper sulfide and lead globules. The provenance of copper was studied using lead isotope analyses. For further discrimination between copper groups and sources elemental analyses by PIXE were performed on some of the weapons investigated. The results revealed two copper groups that could be qualified as “dirty” copper and “clean” copper. The former was used in most of the weapon types whereas the latter was reserved for items made of high-tin bronzes (>11 wt%) which underwent heavy hammering during the manufacturing process. Even though several potential copper sources were identified, the data point to Iran and Oman as the most probable areas of origin for the metal used in these weapons. These results contribute to the study of inter-regional exchange networks in the ancient Near East.     

Short Report: Evidence of Trepanation on a Female Individual from the Middle Bronze Age Necropolis of Casas Velhas (Melides,Portugal)

Recent reanalysis of the human remains unearthed from the grave cists of the necropolis of Casas Velhas (Melides, Portugal) from the Southwest Iberian Middle Bronze Age, with a minimal number of 25 individuals (23 adults and 2 non‐adults), allowed relevant anthropological data. This culture, although widespread in southern Portugal and nearby areas of southwest Spain in the Middle Bronze Age, is characterized by the paucity of preserved human remains and thus the anthropological knowledge of these human populations. The adult female skeleton exhumed from cist 30, the last interment of this double burial, exhibit a complete perforation on the right parietal bone. The aim of this paper is to present and discuss this defect, which most probable diagnosis is trepanation. The hole is oval shape exhibiting long term healing. A shallow remodelled area is visible around the defect, which suggests scraping method. No complications or evident reasons for the intervention were observed. In terms of mortuary practices no clear distinction was observed between this individual and others from this cemetery. The features of this trepanation fit in the major points summarized by Silva ( 2003 ) for prehistoric Portuguese trepanation. These data sustain the existence of an old tradition of this procedure is this region of Iberia, present, at least, since the Middle Neolithic. Copyright © 2016 John Wiley & Sons, Ltd.     

Geochemical and Petrographic Analysis of Late Bronze Age Cypriot Ceramics (White Slip I and II and Monochrome) from Tell Atchana/Alalakh (Hatay) in the Amuq Valley

White Slip ware, both White Slip I and II, and Monochrome ware are Middle to Late Bronze Age Cypriot pottery types found across a large area of the Eastern Mediterranean region. A vast quantity of these wares has also been uncovered in Tell Atchana/ancient Alalakh in Hatay in southern Anatolia. We analysed a total of 56 White Slip (n = 36) and Monochrome potsherds (n = 20) from Tell Atchana using XRF, ICP–MS and petrographic thin‐section methods. The main aim of the study was to explore the compositional characteristics of the wares and to determine whether they are local imitations of the Cypriot White Slip and Monochrome wares or represent Cypriot exports to this region. The analytical results proved that White Slip I and II were produced from raw clay of mafic and ultramafic source rocks exposed in the Troodos Massif, available in the Limassol area of southern Cyprus and traded to Tell Atchana. Examples of Monochrome ware excavated in Tell Atchana were also imported to the region, most probably from east/north‐east Cyprus. These results demonstrate a close trading connection between Tell Atchana/Alalakh and southern Cyprus during the Middle to Late Bronze Age.     

Identification of dermestid pupal chambers on Southern Levant human bones: inference for reconstruction of Middle Bronze Age mortuary practices

Unique bone damage identified on Middle Bronze Age human skeletal material from the Southern Levant provided important information about the processes of modification and the possible funerary practices resulting in such damage. By comparing archaeological remains with recent skeletal material and by using computed tomography (CT) scans and 3D imaging techniques, the damage is interpreted as pupal chambers created by dermestid beetles. Using skeletal remains from two Middle Bronze Age sites, Jericho Tomb E1 and Munhata Tomb 641, we then discuss how the bores and tunnels left by dermestid beetles on human bones might constitute an interpretative key to the funerary practices of Middle Bronze Age collective burials.     

A Bayesian C chronology of Early and Middle Bronze Age in Sicily. Towards an independent absolute dating

This paper proposes a Bayesian model for the ¹⁴C chronology of Sicilian Early and Middle Bronze Age, with a specific focus on the northeastern sector of the island. Building on the available ¹⁴C determinations, the model allows addressing a number of chronological questions left open in literature, making a first step towards an independent absolute chronology. The analysis put the start of the earlier part of Early Bronze Age (Capo Graziano 1-Casa Lopez phase) between 2400 and 2175 cal BC, and the end at about 1960 cal BC. The advanced stage of the same period (Capo Graziano 1-Filo Braccio phase) is likely to have started and ended around 1960 and 1730 cal BC respectively. The model indicates that the time slot with the highest posterior probability for the start of the Middle Bronze Age–Milazzese (Portella phase) is between 1490 and 1460 cal BC. This turns up to be earlier than held to date. Notably, the model enables for the first time to bracket the development of the later stage of Early Bronze (Capo Graziano 2-M. di Capo Graziano phase) between 1730 (end of Filo Braccio phase) and 1490/60 cal BC (start of Middle Bronze Age–Portella phase). The latter date is earlier than usually held for the end of Capo Graziano 2. The existence of a narrow gap between the end of the latter and the start of Middle Bronze Age-Portella phase is tentatively proposed only on stratigraphic grounds. Further, the analysis enables for the first time to pinpoint and quantify the lag that is likely to have existed between the start of those Sicilian prehistoric phases and the appearance of Late Helladic imports. The comparison with the Aegean ¹⁴C Bayesian chronology indicates that a time lag (about 45 yr) is likely to have occurred between the start of Capo Graziano 2 and of the Late Helladic period. A time lag between 20 and 70 yr is likely to have existed between the start of the Sicilian Middle Bronze Age and of the Late Helladic III. Arguments tentatively supporting the narrower interval are also discussed.     

Characterization and textural analysis of Middle Bronze Age Transdanubian inlaid wares of the Encrusted Pottery Culture,Hungary: a preliminary study

Inlaid ceramics belonging to the Encrusted Pottery Culture and dated to the Middle Bronze Age (2000–1500 BC) are highly distinctive vessels with complex decorative motifs found in large numbers in the Transdanubia region of Hungary. Despite this considerable corpus of material there has been little systematic investigation of the composition of the inlays. Micro-analysis of Transdanubian inlaid wares by X-ray diffraction (XRD), micro-Fourier transform infrared microscopy (FT-IR), and scanning electron microscopy (SEM) provides new compositional, structural and textural information on the inlays. In contrast to common statements in the literature regarding the materials used to make inlays, these new data show that the majority of inlays are composed of hydroxyapatite (bone) that was previously ashed, although some of the inlays are composed of calcium carbonate. Additional compositional and textural variation in the bone inlays suggests that bone material from different skeletal elements and/or of different age may have been used, and that contrasting recipes for inlay preparation were employed during fabrication. These results suggest that the production of inlaid vessels of the Encrusted Pottery Culture was more complex than has hitherto been thought.     

A Provenance Study of Early Bronze Age Artefacts Found in Asturias (Spain) by Means of Metal Impurities and Lead,Copper and Antimony Isotopic Compositions

We describe here the first combined isotopic and impurities study on 27 copper artefacts found in the north‐west of Spain. This study follows previous studies on the lead isotopic composition of copper ores in three local mines that were exploited during the Bronze Age. The levels of impurities found were clearly different from ingots and axes, with ingots having much higher levels of impurities. It was not possible to differentiate the origin of the artefacts only by the impurities present. On the other hand, the lead isotopic composition indicated that all artefacts were prepared from local ores, the ‘La Profunda’ mine being the most probable source for most artefacts that carried out a clear radiogenic lead signature. The copper isotopic composition seemed to be able to differentiate artefacts from the ‘El Aramo’ mine from those from the ‘El Milagro’ and ‘La Profunda’ mines. On the other hand, the antimony isotopic signature was not useful for source allocation.