Ideas no longer written in antler

In the course of the Upper Paleolithic, antler debitage techniques seem to have followed a linear evolution. The earliest one, fracturing by cleaving, appeared during the Aurignacian and is considered by some specialists to be ineffective. According to them, it was not until the invention of the groove and splinter technique during the Gravettian that antler debitage became efficient. Nonetheless, during the Solutrean, fracturing once again became the most common technique, but by splitting. Based on a study of 102 Solutrean pressure tools and experimentations, we reach the conclusion that splitting is a very effective technique that can produce blanks with the same qualities as those made by the groove and splinter technique. The splitting technique was nonetheless excluded in previous studies. We explore the reasons for this and the particularities of the different antler debitage techniques evidenced in the Western Upper Paleolithic.     

The Spatial Organization of Bone Crafting During the Middle and Late Mesolithic at Ringsjöholm and Strandvägen in Sweden

This paper focuses on the spatial distribution of bone tool production waste from two Mesolithic sites in Sweden, Ringsjöholm and Strandvägen, with well-preserved faunal remains including bone and antler artifacts. Local production on both sites has generated a variety of identifiable waste products deriving from complete chains of production, including unmodified bones, debitage and finished products. Identified categories include: blanks, removed epiphyses, bone flakes, and preforms. Identification of species shows that antler and bone from red deer were the preferred raw materials. Spatial statistical analyses confirm that different stages of bone tool production were organized within separate areas of the sites and that larger items were discarded in the water along the shorelines. Interestingly, blanks and preforms seem to have been stored under water for future use and demarcated clusters of bone flakes in association with dwellings represent “bone knapping floors” where production was more intense than in other areas.     

Microscopic examination of ground sections – a simple method for distinguishing between bone and antler?

Both bones and antlers have been used throughout history for manufacturing various products. Therefore, archaeologists often have to distinguish between these materials. The more the raw material (bone or antler) has been treated, the more complicated it is to distinguish. For this study, recent macerated and archaeological samples of bone and antler and their products have been compared. Antler is usually very easy to distinguish based on the characteristic surface structure; however, the original surface is not preserved in all artefacts. The inner surface of the diaphysis of long bones is mostly compact with prominent trabeculae and lamellae, whereas, after removal of the spongiosa, the inner surface of antler is characterised by numerous grooves. Sometimes, however, artefacts are found which are composed only of the compact bone substance, without inner and outer surfaces, and it is not possible to distinguish between bones and antlers macroscopically. Haversian systems can be found in histological and ground sections of both bones and antlers. In contrast to bones, antlers have few interstitial lamellae. The osteons of antler seem to be smaller and to consist of fewer layers than those of bone. Inner and outer circumferential lamellae cannot be distinguished in antlers. Although microscopic examination of sectioned samples does not allow distinction between bones and antlers in every case, it represents a valuable additional tool for distinguishing between these two materials in historic artefacts. Copyright © 2007 John Wiley & Sons, Ltd.     

Soils and Earthen Building Materials Used for the Buddhist Temple Complex

This article presents a comprehensive study of the local soils and historic earthen building materials used in Nako temple complex in Western Himalayas. On-site and laboratory investigations followed a holistic approach to characterize materials and identify historic manufacturing formulas. The interdisciplinary and novel methodology used for analysis of the earthen building materials combine geological, chemical, mineralogical, geotechnical, and mechanical approach. The results presented in this article enable a better understanding of material culture and advance the study of damage and decay processes found in the temple buildings. In addition, a suitable conservation and preservation strategy is presented.     

A new experimental study on percussion marks and notches and their bearing on the interpretation of hammerstone-broken faunal assemblages

Preliminary experiments on bone breakage have shown the potential utility of quantifying some of its diagnostic features (percussion marks, percussion notches) for taphonomic inferences about human and carnivore involvement in bone breakage in faunal assemblages. The present study increases the range of experiments undertaken to understand the identification of hammerstone percussion (dynamic loading) and its differences from carnivore bone breakage through tooth pressure (static loading). This study contributes to a better understanding of frequencies of percussion marks, uncovers and quantifies those percussion marks that lack key diagnostic features to be identifiable and that could be mistaken with carnivore tooth marks, quantifies notch types, shows different size ranges for notches on bones from small and large fauna than previously reported, quantifies the proportion of notches bearing percussion marks, and introduces new size data for percussion (impact) flakes and percussion marks. Furthermore, all these variables have been applied to a dual experimental set: one experiment using non-modified hammerstones and another based on the use of modified hammerstones. Results vary considerably according to hammerstone type. Some of these taphonomic variables increase the range of equifinality when identifying marks and notches created by different human and non-human agents. This calls for further caution when using isolated variables and features rather than a holistic approach to make taphonomic inferences.     

Application of 3-dimensional microscopy and micro-CT scanning to the analysis of Magdalenian portable art on bone and antler

The appearance of portable artistic objects during the Upper Palaeolithic is characterised by a combination of a wide choice of techniques, use of different materials and a diversity of iconographic expression, with many objects made of bone and antler decorated with animal representations. Taphonomic and experimental approaches have been systematically applied in an effort to understand the technical and artistic procedures followed. In this study, we applied a new combination of 3-dimensional microscopy (focus variation optical microscope) and micro-CT scanning to the analysis of two Magdalenian engraved specimens: a reindeer antler from the site of Neschers (France), engraved with the partial image of a horse in left profile, and a horse metatarsal from Courbet Cave, Penne (France), engraved with a horse head also in left profile. Results of the analysis suggest that both the Neschers and Courbet Cave engravings had been prepared before being carved. The overall contours of the horse body/head were incised first, while anatomical features were added afterwards. In the Neschers case, the incision resulted from the repeated scratching of a previously made incision in order to enlarge the engraving, possibly reflecting the engraver's aesthetic sense. The combination of the techniques used in this study is applicable to fragile or unique archaeological specimens. Micro-CT scanning, in particular, provides non-invasive means for identifying engravings that are obscured by encrusted sediment. The application of these techniques can potentially open new avenues for the authentication, technical and gestural recognition and interpretation of incised forms and artistic creativity.     

Breaking Bones to Obtain Marrow: A Comparative Study between Percussion by Batting Bone on an Anvil and Hammerstone Percussion

The fat‐ and nutrient‐rich marrow of animal bones can be extracted using different techniques. Passive hammerstone percussion has been the primary focus of experimental bone breaking and the main analogy to understand archaeological bone breakage. Here, the term ‘passive’ is applied because the bone to be broken passively receives the impact from a hammerstone. In addition to this technique, there is another bone‐breaking method that also requires direct percussion, but in an active way. This method is percussion by ‘batting’, in which the bone is actively hit against an anvil until the bone breaks. This technique has rarely been considered at an experimental level and, therefore, has been omitted in the majority of the archaeological interpretations of faunal assemblages with pre‐use of fire technologies. In this study, we attempt to analytically characterize this type of bone‐breaking technique through a systematic comparison with hammerstone percussion. The applied statistical tests will allow us to distinguish some diagnostic modifications, such as the outlines of the fracture planes and the type of notches or their location with respect to the longitudinal axis of the bone. These features and their proportions allow the consideration of the use of this technique in Pleistocene anthropogenic faunal assemblages.     

The Still Bay points of Blombos Cave (South Africa)

We present the results of a technological and morphometric analysis of all the Still Bay points (n = 371) recovered from the 1993 to 2004 excavations at Blombos Cave. We have been able to reconstruct the manufacturing sequence of the bifacial points from initial shaping, by direct internal percussion, to finished morphology, by direct marginal percussion. Identifications of impact fractures and manufacturing breaks are based on comparisons with experimental and archaeological bifacial points of verified function, i.e. Paleoindian points from bison kill sites, replicates of Solutrean points mounted as spear-heads or arrowheads and shot into adult cattle, and experimental replication on local raw materials. Our analysis shows that: (a) only a minority of the points are finished forms, and that a large number of pieces are production failures, a situation known at bifacial point production sites of later ages; (b) morphometric and impact scar analyses should take into account this process and distinguish finished points from preforms and unfinished points; (c) there were at least three different kinds of raw material sources and that there is a marked increase in the frequencies of silcrete with respect to the M2 and M3 phases at Blombos; (d) three kinds of evidence prove that some of the points were hafted axially and used as spear tips; (e) production of bifacial points was a primary activity at the site but the hypothesis of intergroup exchange of Still Bay points cannot be sustained on the basis of present evidence; and (f) the Still Bay phase appears to initiate a trend to relatively rapid changes in specialized hunting weaponry and that this innovation is congruent with other innovations such as bone tools, shell beads and engraved ochre of the M1 and M2 phases at Blombos.     

MULTIANALYTICAL STUDY OF PALAEOLITHIC REINDEER ANTLER. DISCOVERY OF ANTLER TRACES IN LASCAUX PIGMENTS BY TEM*

Palaeolithic and modern reindeer antler were analysed using complementary techniques to evaluate the conservation state of bone material. X‐ray diffraction, FT‐IR spectroscopy, scanning electron microscopy (SEM–EDX) and transmission electron microscopy (TEM–EDX) as well as proton induced X‐ray and γ‐ray emission (PIXE–PIGE) at the particle accelerator AGLAE, C2RMF were applied. This study enabled us to define the chemical and structural features of ancient antler at the micro‐ and nanometre scale and compare them to those of other bone materials such as bone and ivory. Antler is richer in its organic fraction compared to bone and ivory. Its mineral fraction, carbonated hydroxylapatite, shows very specific crystal shapes at the nanometre scale. This specific property allowed us to recognize antler traces in pigment samples originating from rock art paintings in the Lascaux cave, Dordogne, southwestern France, Magdalenian period. Therefore, TEM–EDX is the technique of choice for characterizing antler traces in complex mixtures. In the paint material of Lascaux, antler seems most likely to be a pollutant introduced either by stirring the pigments in water with a piece of antler or by carving antler artefacts next to the preparation of paint material. However, it could eventually be used as a marker of paintings that were created contemporaneously.     

CLAY RESOURCES AND TECHNICAL CHOICES FOR NEOLITHIC POTTERY (CHALAIN,JURA, FRANCE): CHEMICAL,MINERALOGICAL AND GRAIN‐SIZE ANALYSES*

Many authors have considered pottery manufacturing constraints and sociocultural elements as factors in change in past civilizations over time. The main issue of this research is to better understand the reasons for changes, or choices, in pottery raw materials. The very precise and detailed stratigraphy and cultural succession of occupations is based on dendrochronological data from the lake‐dwelling sites of Chalain (Jura, France). Petrographic, palaeontological and chemical analyses were used to determine the nature and origins of the raw materials used by the Neolithic potters. Stratigraphy and dendrochronological data were used to reconstruct in detail the evolution dynamics of fabric changes. Several raw material sources were identified for many of the pottery groups. Each of them was sampled for qualitative experimental tests of pottery forming. The experimental results show a high variability between the sediments tested. This variability was quantitatively estimated by XRF, XRD, the Rietveld method, calcium carbonate quantification and laser grain‐size analyses of matrices, indirect measures of plasticity. These analytical results allow a better understanding of the differences observed in the experimental tests. On the basis of these experimental and analytical results, changing parameters such as pottery manufacturing constraints, mineralogical characteristics of raw materials and sociocultural factors are considered. In conclusion, all the social and technical parameters, in each archaeological context, must be taken into account for a better understanding of the changes occurring throughout the chronological sequence.     

Urban size and KIBS vertical disintegration: the case of Milan

The literature shows that market size favours firms’ vertical disintegration because it reduces transaction and knowledge coordination costs. The existing evidence is based primarily on cross-sectional data and on the manufacturing sector, with little or no attention is given to longitudinal data and services. This paper estimates the effect of urban size on the purchase of service inputs by knowledge-intensive business service firms located in the metropolitan region of Milan. Relying on a rich panel dataset, and adopting different econometric techniques to overcome endogeneity, we find a positive and statistically significant effect of increased urban population on the degree of KIBS vertical disintegration only when urban size is measured at the province level. We also find that this effect holds particularly in the case of traditional professional- rather than technology-related activities.     

Late Mesolithic hunting of a small female aurochs in the valley of the River Tjonger (the Netherlands) in the light of Mesolithic aurochs hunting in NW Europe

The valley of the River Tjonger, situated in the Province of Friesland (the Netherlands), is rich in prehistoric organic remains. The fill of the valley, consisting of waterlogged sediments (peat, gyttja and sands), presents favourable conditions for the preservation of bone, antler and botanical remains. Numerous bones with chop and cut marks, in majority of aurochs (Bos primigenius), are known from several locations in the valley. The Late Mesolithic (ca. 8000–5500 BP) is especially well represented. In this paper we present a recently discovered small hunting and butchering wetland site dating to the Late Mesolithic. The site, named Balkweg, represents a single hunting and primary butchering event pertaining to a small female aurochs with a height at the withers of 134 cm. The morphology of the vertebrae and the phalanges as well as the Late Mesolithic date confirm the identification as an aurochs cow. Single event sites are underrepresented in the archaeological record due to their small size and poor visibility. The importance of aurochs hunting during the Mesolithic is discussed in this paper as well.     

An Examination of Terminal Archaic Bone and Antler Implements from the Firehouse Site,Dearborn County,Indiana

The Firehouse site (12D563) is a Terminal Archaic Riverton culture site located on a bluff overlooking the confluence of the Ohio and Great Miami Rivers in Dearborn County, Indiana. Excavations at the site in 2003 and 2004 yielded a highly diverse assemblage of around 300 bone and antler implements. Such large assemblages of organic tools are rare outside of wet sites, rockshelters, and shell middens and provide a unique opportunity for the study of tool forms not typically recovered in the Midwest. A typological analysis of the Firehouse assemblage indicates some similarities between these tools and Riverton culture bone and antler implements from the type sites in Illinois. Additionally, a microscopic analysis of manufacturing microtraces indicates that most tools were made using a lithic shaving (rather than an abrasion) technique.     

Large Kombewa flake production in north Oman

In this paper we present the results of surveys carried out in February 2016 along a palaeo‐drainage system near the village of Bisyah. We report first on the geological prospection, which was our main goal, and then present our discovery of the only known localities in north Oman of large Kombewa flake production (>10 cm up to 20 cm). Among the scatter of artefacts, we found cores and large Kombewa flakes with two opposed bulbs of percussion, a technology that had not been known in this region until now. In spite of the local features, the typo‐technological traits of the artefacts suggest that at least part of them resemble in some way the Acheulean techno‐complex, but there are still many questions remaining on the age of these artefacts.     

骨角质文物保护研究进展

骨角质文物丰富的历史价值使其成为世界各地考古学、人类学、艺术史研究的重要材料,但由于骨角质文物一般年代久远、保存环境各异以及自然矿化等因素造成该类文物的保存状况不容乐观。该文拟从骨角质文物保护研究的角度,对目前骨角质文物的制作材料与工艺、病害研究、修复技术及预防性保护等方面进行梳理,并尝试找出目前存在的问题与保护需求。我国骨角质文物保护需求主要包括出土饱水器物的现场保护是骨角质文物保护中亟待解决的问题;中国最早的古文字资料即有字甲骨的防风化研究是骨角质文物保护中的重点课题;全国各地出土的不同时期动物骨骼的保护是骨角质文物保护工作的主要内容。     

Iron Age iron files from England

There are more than 40 iron files known from the pre-Roman Iron Age in England, of which 26 come from settlements with evidence of manufacturing activities. The files vary considerably in size and form. The coarse-cut files were probably intended for working soft or fibrous materials such as wood or horn, whereas the finer-cut files were probably for working more compact or harder materials, including metals. This corresponds to the metallographic evidence from a sample of 17 files, of which only seven finer-cut ones have been found to be quench-hardened. The discovery of metal particles in five files provides further evidence of use.     

Long‐term stability of fracture systems and their behaviour as flow paths in uplifting granitic rocks from the Japanese orogenic field

In granitic rocks, fracture networks typically provide pathways for groundwater flow and solute transport that need to be understood to assess the long‐term performance of deep underground storage or disposal facilities such as radioactive waste repositories. However, relatively little is known about the long‐term processes of fracturing and/or the longevity of flow paths (FP) in granitic rocks distributed within orogenic belts. To clarify these issues, Japanese plutons of different ages and in situ fractures in granite at the Mizunami Underground Research Laboratory (MIU) located in central Japan were studied. Detailed structural characterization and geochemical analysis of in situ fracture fillings sampled from a depth of 300 m were carried out to clarify the relationship between fracturing and mineral infilling processes. Different plutons show identical episodes of fracturing and fracture filling, consisting of: brittle tensile fracturing, due to decreasing temperature through the ductile–brittle transition after plutonic intrusion (Stage I); relatively rapid uplifting (ca. a few mm/year) accompanied by hydrothermal water circulation, which produced uncrushed layered mineral fillings (Stage II); and a period of low‐temperature meteoric water circulation following exposure after uplift (Stage III). The parageneses of carbonate mineral fracture fillings and their carbon isotopic compositions (¹⁴C, δ¹³C) show that there were distinct episodes of carbonate mineral precipitation during the rapid uplifting of a pluton. The carbonate minerals that formed during each episode incorporated carbon from a distinct source. The evolution of fillings identified here enables development of a specific model of fracturing and persistence of fluid‐conducting systems in the plutons of the orogenic field.     

NEUTRON TOMOGRAPHY AS A VALUABLE TOOL FOR THE NON‐DESTRUCTIVE ANALYSIS OF HISTORICAL BRONZE SCULPTURES

This paper explains, with the example of a Roman object (the ‘Mars from Oberweningen’, Switzerland), why neutrons can be used preferentially for the non‐destructive analysis of metallic objects of relatively large size. This method is superior to the conventional X‐ray tomography method due to the higher penetration ability in metals such as copper, tin and even lead. With this method, differing materials can also easily be differentiated. In this way, the inner and outer structures of objects can be observed with the help of tools based on mathematical algorithms. Slices at arbitrary positions and segmentation of different material clusters aid the understanding of manufacturing processes and can describe the present preservation status. This helps in selecting optimal and additional conservation measures in museums for further preservation. Beside the qualitative overview on structure and inner properties of the objects, quantitative information can be derived about material content and composition. This method and the subsequently needed facilities for this method are available at PSI for similar studies on demand.     

中国传统建筑营造技艺的整体保护

中国传统建筑营造技艺是以木材为主要建筑材料,以榫卯为木构件的主要结合方法,以模数制为尺度设计和加工生产手段的建筑营造技术体系。营造技艺以师徒之间"言传身教"的方式世代相传。中国传统木结构建筑营造技艺根植于中国特殊的人文与地理环境,是在特定自然环境、建筑材料、技术水平和社会观念等条件下的历史选择,反映了中国人营造合一、道器合一、工艺合一的理念。随着全球化和城市化进程的提速,我国文化遗产的存续受到猛烈冲击,包括营造技艺在内的一些依靠言传身教进行传承的非物质文化遗产正在迅速消失,许多传统技艺濒临消亡,传统建筑营造技艺面临现代建筑思想和建造方式的巨大冲击而目益萎缩,已至濒临失传的境地,加强非物质文化遗产保护刻不容缓。     

A CAPACITY PREDICTION PROCEDURE FOR CONCRETE-FILLED STEEL COLUMNS

A seismic design procedure for partially concrete-filled box-shaped steel columns is presented in this paper. To determine the ultimate state of such columns, concrete and steel segments are modelled using beam-column elements and a pushover analysis procedure is adopted. This is done by means of a new failure criterion based on the average strain of concrete and steel at critical regions. The proposed procedure is applicable to columns having thin- and thick-walled sections, which are longitudinally stiffened or not. An uniaxial constitutive relation recently developed is employed for concrete filled in the thick-walled unstiffened section columns. Modifications are introduced to this model for other types of columns. Subsequently, the strength and ductility predictions obtained using the present and previous procedures are compared with the corresponding experimental results. Comparisons show that the present procedure yields better predictions. It is revealed that the inclusion of the confinement effects and softening behaviour of concrete is important in the present kind of prediction procedures. Furthermore, an extensive parametric study is carried out to examine the effects of procedures and geometrical and material properties on capacity predictions.