THE BEGINNINGS OF ISLAMIC STONEPASTE TECHNOLOGY*

A multidisciplinary programme of research on Islamic pottery has been focused on questions of the dating, provenance and technology of Islamic pottery. One particular question has been the development of stonepaste, a material made primarily of crushed quartz with added frit-glass and clay. The combination of the different approaches of this study has revealed early foundations for the technology in ninth-century AD Iraq, apparently originating in the clay ceramic rather than the ‘Egyptian faience’ tradition. Subsequent and final practice developed in tenth- and eleventh-century AD Egypt. This technology becomes the primary body for all fine Islamic ceramics.     

THE BEGINNINGS OF TIN-OPACIFICATION OF POTTERY GLAZES

A multidisciplinary programme of research on the glazed ceramics of the Islamic world has been focused on questions of their dating, provenance and technology. One particular question has been the development of tin-opacified glazes, and the nature of glaze opacification generally in the Islamic world. The findings of the various studies combine to indicate that tin was first used experimentally in Basra, Iraq, in the first half of the eighth century AD, apparently within the context of pre-Islamic opaque-glaze technology. Over the course of the next century, an opaque-glaze technology entirely reliant on tin oxide inclusions was developed in Iraq and Egypt and, subsequently, this technology spread to the rest of the Islamic world and also to Europe.     

Composition of the Lustre Pigment Used in the Production Of 13th Century AD Raqqa Lustreware from Syria

The very rare find of the relic of the original lustre pigment attached to the glazed surface of a sherd of 13th century ad Raqqa type lustreware from Syria has been analysed using a combination of analytical scanning electron microscopy (SEM), micro‐X‐ray diffraction (XRD) and Rutherford backscattering spectroscopy (RBS). The composition of the pigment relic inferred from these analyses is shown to match those of recipes for lustre production given in the early treatises by Jazbir Ibn Hayyan (c. ad 721–c. ad 815) and Abū'l Qasim (ad 1301). Similarities and differences between this 13th century ad Syrian pigment and pigments used in the ninth century ad in Iraq, in the 14th century ad in Islamic and Hispano‐Moresque Spain, and in the 16th century ad in Renaissance Italy are discussed.     

The production technology of Iznik pottery—a reassessment*

Previous research has established that Iznik pottery differs from other Islamic stonepaste pottery in that its stonepaste bodies contain lead oxide as well as soda and lime, and that a significant proportion of the tin oxide in its glaze is present in solution rather than as tin oxide particles. In order to better understand these distinguishing features, the chemical compositions and microstructures of Iznik pottery and tile samples, together with those of lumps of glass found in association, were investigated using both scanning electron and optical microscopy. These data have been supplemented by the study of replicate lead–alkali glazes produced in the laboratory with a range of different compositions. The results demonstrate that separate soda–lime and high‐lead glasses were used in the production of Iznik stonepaste bodies, and that the total glass contents of the bodies were significantly higher than those quoted by Abū’l‐Qāsim, who was writing in about ad 1300. The very high purity of the lead–soda Iznik glazes indicated that the alkali flux used was either a purified plant ash or an as yet unidentified mineral source of soda. Replication experiments established that the high solubility of tin oxide in the glaze was due to the high purity of the glaze constituents. Furthermore, it is suggested that tin oxide was added to the glaze in order to give it a very slight opacity and thus obscure any blemishes in the underlying body.     

Radical changes in Islamic glass technology: evidence for conservatism and experimentation with new glass recipes from early and middle Islamic Raqqa,Syria*

The chemical analysis of excavated glass fragments from dated archaeological contexts in Raqqa, Syria, has provided a detailed picture of the chemical compositions of artefacts deriving from eighth to ninth and 11th century glassmaking and glassworking activities. Evidence for primary glass production has been found at three excavated sites, of eighth to ninth, 11th and 12th century dates; the first two are discussed here. The 2 km long industrial complex at al‐Raqqa was associated with an urban landscape consisting of two Islamic cities (al‐Raqqa and al‐Rafika) and a series of palace complexes. The glass fused and worked there was presumably for local as well as for regional consumption. Al‐Raqqa currently appears to have produced the earliest well‐dated production on record in the Middle East of an Islamic high‐magnesia glass based on an alkaline plant ash flux and quartz. An eighth to ninth century late ‘Roman’/Byzantine soda–lime recipe of natron and sand begins to be replaced in the eighth to ninth century by a plant ash – quartz Islamic soda–lime composition. By the 11th century, this process was nearly complete. The early Islamic natron glass compositional group from al‐Raqqa shows very little spread in values, indicating a repeatedly well‐controlled process with the use of chemically homogeneous raw materials. A compositionally more diffuse range of eighth to ninth century plant ash glass compositions have been identified. One is not only distinct from established groups of plant ash and natron glasses, but is believed to be the result of experimentation with new raw material combinations. Compositional analysis of primary production waste including furnace glass (raw glass adhering to furnace brick) shows that contemporary glasses of three distinct plant ash types based on various combinations of plant ash, quartz and sand were being made in al‐Raqqa during the late eighth to ninth centuries. This is a uniquely wide compositional range from an ancient glass production site, offering new insights into the complexity of Islamic glass technology at a time of change and innovation.     

Technology Transfer at the Periphery of the Mycenaean World: The Cases of Mycenaean Pottery Found in Central Macedonia (Greece) and the Plain of Sybaris (Italy)*

The study of technology transfer in pottery production to the periphery of the Mycenaean world has been addressed by considering two different areas, southern Italy and central Macedonia. Technological features such as ceramic paste, decoration and firing have been determined for different ceramic groups established according to provenance criteria. The studies of technology and provenance have been performed following an archaeometric approach, using neutron activation analysis, petrographic analysis, X‐ray diffraction and scanning electron microscopy. The results have revealed the existence of two different models. On the one hand, southern Italy seems to exhibit a more organized pottery production, which follows a Mycenaean‐like technology, while in central Macedonia production is probably more varied, being based in part on the technology of the local tradition.     

CHARACTERIZATION OF RED‐COLOURED SLIPS (ALMAGRA) ON ISLAMIC CERAMICS IN MUSLIM SPAIN*

Small objects found in Islamic (eleventh‐century) kilns excavated in Zaragoza (Spain) were studied to determine the nature of the red coating of almagra pottery. Ceramics with almagra decoration were completely coated with a glossy deep‐red layer, a slip, applied to the body before firing. Chemical and mineralogical studies were carried out, together with analysis of a surface treatment with organic compounds. The results of this study confirm that almagra ceramics were produced by means of a specific and elaborate process (slip preparation, firing and wax application), demonstrating the introduction of this slip into local production during the Islamic period.     

The production and technology of glazed ceramics from the middle ages,found in the saepinum territory (Italy): a multimethodic approach*

A collection of ceramics from the Middle Ages found in Altilia and Terravecchia (the Saepinum area, Campobasso, Italy) were characterized by using different mineralogical analyses to investigate their provenance and production techniques. The body ceramic was investigated using Rietveld phase analysis of X‐ray powder diffraction patterns, X‐ray fluorescence spectrometry and scanning electron microscopy. The chemical compositions of the coatings were measured by scanning electron microscopy and their mineralogical compositions were determined using a particular technique of X‐ray small‐angle scattering (SAS) optimized for studies of thin films. Moreover, the material used for decoration was studied using micro‐Raman spectroscopy. The archaeometric results confirmed the distinction into two different ceramic classes, already individuated from archaeological analysis: the Altilia objects belong to the protomajolica class, whereas the objects from Terravecchia are RMR (ramina‐manganese‐red) ceramics. A comparison between the chemical and mineralogical compositions of good‐quality ceramic objects and those of waste products indicated local production of the ceramics. A sharp distinction was found in the chemical composition of the coatings: the Altilia products have tin‐opacified lead glazes, while the Terravecchia ones have transparent high‐lead glazes. Among the Altilia products, the unsuccessful process that produced a large quantity of discarded materials was attributed to the high lead content of the glazes. In fact, the principal advantage of the high lead content was to make the preparation and application of the glaze suspension easier, but the risk of reduction of lead oxide to metallic lead was greatly increased. Using micro‐Raman spectroscopy, the following minerals were identified as pigments: pyrolusite for the dark colour, malachite for green, lepidocrocite for yellow and hematite for red.     

Enamel Ultrastructure of Cattle from the Quaternary Period in India

Abstract

The present paper examines tooth enamel of three species of cattle, Bos acutifrons, Bos namadicus and Bos indicus, which are supposed to have been phylogenetically related and belong to the Quaternary period. It aims to show whether in a short geological time span of 2myrs, the changing environs that cattle were exposed to during the Early Holocene have caused any microstructural changes in their tooth enamel.

Mammalian teeth exhibit a very complex arrangement of prisms in the enamel. The prisms are bundles of hydroxyapatite crystallites, arrangement of which is genetically determined and subject to evolutionary change. Hypsodonty or high crowned molars are such examples where concomitant masticatory stress factors near the enamel-dentin junction (EDJ) are known to have affected and altered the enamel microstructure in several large mammalian genera. Modified radial enamel in the deep enamel layer in some ungulates, including cattle, is an adaptive response to these stress factors which appeared much earlier (Tertiary) in the evolutionary history of these large mammals.

The cattle enamel analysed here revealed several levels of structural complexity indicating its functional designations. The schmelzmuster in cattle are formed of three enamel types: radial enamel (outer enamel), Hunter-Schreger Bands (mid enamel), and modified radial enamel (inner enamel). There is an increase through time in the percentage of Hunter-Schreger Bands (HSB), which cover up to about 68% of the entire enamel surface among recent cattle. The modified radial enamel and radial enamel do have a receding trend in the Holocene, compared to their Pleistocene ancestors.     

Strontium Isotopes in the Investigation of Early Glass Production: Byzantine and Early Islamic Glass from the Near East*

⁸⁷Sr/⁸⁶Sr ratios have been determined for glasses from four production sites, dated to between the sixth and the 11th centuries, in the Eastern Mediterranean region. On the basis of elemental analyses, the glasses at each location are believed to have been melted from different raw materials. Two glass groups, from Bet Eli‘ezer and Bet She‘an, in Israel, are believed to have been based upon mixtures of Levantine coastal sands and natron, and have ⁸⁷Sr/⁸⁶Sr ratios close to 0.7090, plus high elemental strontium, confirming a high concentration of modern marine shell (⁸⁷Sr/⁸⁶Sr ~ 0.7092) in the raw materials. The isotopic compositions of these two groups of glasses differ slightly, however, probably reflecting a varying ratio of limestone to shell because the sands that were utilized were from different coastal locations. Natron‐based glasses from a workshop at Tel el Ashmunein, Middle Egypt, have ⁸⁷Sr/⁸⁶Sr values of 0.70794–0.70798, and low elemental strontium, consistent with the use of limestone or limestone‐rich sand in the batch. High‐magnesia glasses based on plant ash, from Banias, Israel, have ⁸⁷Sr/⁸⁶Sr values of 0.70772–0.70780, probably reflecting the isotopic composition of the soils that were parental to the plants that were ashed to make the glass. Strontium and its isotopes offer an approach to identifying both the raw materials and the origins of ancient glasses, and are a potentially powerful tool in their interpretation.     

State,Parliament and Empire in the Mid 18th Century: Hudson's Bay and the Parliamentary Enquiry of 1749

In 1749, the house of commons appointed a committee of enquiry into the lands and trade of Hudson's Bay. This was the climax to nearly 20 years' work by the Ulsterman, Arthur Dobbs, which focused first on renewed search for a northwest passage and later widened to attempt to expand trade and settlement by challenging the monopoly of the Hudson's Bay Company. Dobbs's Irish patriotism, linked by support for union with Britain with his remarkably expansive vision of British empire, became concentrated on this campaign with a zeal and tenacity which overrode contrary evidence based on experience. Propaganda pamphlets, mobilisation of compatriots, merchant and political contacts, briefs for MPs, marshalling of evidence and witnesses for parliamentary committees, 30 petitions from a variety of places, organised by Liverpool and Bristol merchants who took the lead in the final campaign: all were used to attempt to influence parliament. This was an impressive mid-century effort to promote British commerce and manufactures, actively supported by the parliamentary opposition which was reviving under Leicester House leadership. Yet, while this campaign could shape the report of the committee of enquiry, the House itself was not so easily moved, especially when public expenditure was likely to be involved. A motion arising from the report was decisively defeated. The impressive campaign came to nought. While it indeed reveals powerful visions of commercial and imperial expansion in the mid 18th century, the outcome suggests that realism and scepticism prevailed at the heart of the state.