EVALUATION OF CONVENTIONAL AND ADAPTIVE PUSHOVER ANALYSIS II: COMPARATIVE RESULTS

In this paper, the methodology for evaluation of conventional and adaptive pushover analysis presented in a companion paper is applied to a set of eight different reinforced concrete buildings, covering various levels of irregularity in plan and elevation, structural ductility and directional effects. An extensive series of pushover analysis results, monitored on various levels is presented and compared to inelastic dynamic analysis under various strong motion records, using a new quantitative measure. It is concluded that advanced (adaptive) pushover analysis often gives results superior to those from conventional pushover. However, the consistency of the improvement is unreliable. It is also emphasised that global response parameter comparisons often give an incomplete and sometimes even misleading impression of the performance.     

Analytical Seismic Assessment of a Tall Long-Span Curved Reinforced-Concrete Bridge. Part I: Numerical Modeling and Input Excitation

The seismic response of bridges is affected by a number of modeling considerations, such as pier embedment, buried pile caps, seat-type abutments, pounding, bond slip and architecturally flared part of piers, and loading considerations, such as non-uniform ground excitations and orientation of ground motion components, which are not readily addressed by design codes. This article addresses a methodology for the nonlinear static and dynamic analysis of a tall, long-span, curved, reinforced-concrete bridge, the Mogollon Rim Viaduct. Various modeling scenarios are considered for the bridge components, soil-structure interaction system, and materials, i.e., concrete and reinforcing steel, covering all its geotechnical and structural aspects based on recent advances in bridge engineering. Various analysis methodologies (nonlinear static pushover, time history response to uniform and spatially variable seismic excitations, and incremental dynamic analyses) are performed. For the dynamic analyses, a suite of nine earthquake accelerograms are selected and their characteristics are investigated using seismic intensity parameters. A recently developed approach for the generation of non-uniform seismic excitations, i.e., spatially variable simulations conditioned on the recorded time series, is used. Methods for the evaluation of structural performance are discussed and their limitations addressed. The numerical results of the seismic assessment of the Mogollon Rim Viaduct are presented in the companion article (Part II). The sensitivity of the bridge response to the adopted modeling, loading and analyzing strategies, as well as the correlation between structural damage and seismic intensity parameters are examined in detail.     

Methods and Approaches for Blind Test Predictions of Out-of-Plane Behavior of Masonry Walls: A Numerical Comparative Study

ABSTRACT

Earthquakes cause severe damage to masonry structures due to inertial forces acting in the normal direction to the plane of the walls. The out-of-plane behavior of masonry walls is complex and depends on several parameters, such as material and geometric properties of walls, connections between structural elements, the characteristics of the input motions, among others. Different analytical methods and advanced numerical modeling are usually used for evaluating the out-of-plane behavior of masonry structures. Furthermore, different types of structural analysis can be adopted for this complex behavior, such as limit analysis, pushover, or nonlinear dynamic analysis.

Aiming to evaluate the capabilities of different approaches to similar problems, blind predictions were made using different approaches. For this purpose, two idealized structures were tested on a shaking table and several experts on masonry structures were invited to present blind predictions on the response of the structures, aiming at evaluating the available tools for the out-of-plane assessment of masonry structures. This article presents the results of the blind test predictions and the comparison with the experimental results, namely in terms of formed collapsed mechanisms and control outputs (PGA or maximum displacements), taking into account the selected tools to perform the analysis.     

SEISMIC ENERGY DEMAND IN STEEL MOMENT FRAMES

The present paper investigates the seismic energy demand in steel moment-resisting frames. The frames, with 3, 6 and 10 storeys, and 4 and 8 spans, are designed according to current seismic code provisions. The energy response (energy quantities and their distributions) in the frames subjected to an ensemble of six earthquake ground motions recorded on different soil conditions, is investigated by nonlinear time history analysis. The study concludes that (1) the results of energy response can be developed into a rational method of seismic evaluation and design for steel moment-resisting frames; (2) the energy concept based on the single-degree-of-freedom has limitations when extended to the realistic structural system for design purposes; and (3) it is necessary to develop the energy-based approach for seismic evaluation and design based on the seismic response of a realistic multi-degree-of-freedom structural system.     

Effects of Geometrical Features on the Seismic Response of Historical Masonry Towers

ABSTRACT

Historical masonry structures are often located in earthquake-prone regions and the majority of them are considered to be seismically vulnerable and unsafe. Historical masonry towers are slender structures that exhibit unique architectural features and may present many inadequacies in terms of seismic performance. The seismic protection of such typologies of structures and the design of effective retrofitting interventions require a deep understanding of their behavior under horizontal loads. This paper presents the results of the seismic performance evaluation of historical masonry towers located in Northern Italy. A large set of case studies is considered, comprising a significant number of towers with high slenderness and marked inclination. First, a preliminary assessment of the dynamic behavior of the different towers is carried out through eigenfrequency analyses. Then, non-linear dynamic simulations are performed using a real accelerogram with different peak ground accelerations. A damage plasticity material model, exhibiting softening in both tension and compression, is adopted for masonry. The huge amount of results obtained from the non-linear dynamic simulations allows a comparative analysis of the towers to be performed in order to assess their seismic vulnerability and to show the dependence of their structural behavior on some geometrical characteristics, such as slenderness, inclination, and presence of openings and belfry. The evaluation of different response parameters and the examination of tensile damage distributions show the high vulnerability of historical masonry towers under horizontal loads, mainly in the presence of marked inclination and high slenderness. Some general trends of the seismic behavior of the towers are deduced as a function of the main typological features.     

DUCTILITY REDUCTION FACTOR OF MDOF SHEAR-BUILDING STRUCTURES

In this paper, the results of recent studies on inelastic seismic response of MDOF shear-building structures are presented. In the last few decades, the concept of response modification factor R has been introduced and developed to account for inelastic nonlinear behaviour of structures under earthquakes. In this paper, an attempt has been made to adjust and extend this concept through introducing a modifying factor R _T . This factor is used for dynamic analysis of MDOF structures, including the calculation of inelastic response spectra. Sensitivity analysis was carried out to identify the parameters that have influence on R _T . It has been demonstrated that R _T is predominantly a function of number of stories, and accordingly a relationship has been suggested. Finally, an approximate approach has been developed for evaluating the seismic strength and ductility demands of MDOF structures.     

Nonlinear Static and Dynamic Behavior of a 16-Story Torsionally Sensitive Building Designed According to Eurocodes

A 16-story building under construction in Bucharest has been designed according to the provisions of EC2 and EC8, using elastic spectral modal analysis. Considering that the building is torsionally sensitive in the nonlinear range, it was further checked and verified using nonlinear dynamic and static procedures, using a detailed space-frame model. Specifically, time-history analysis for seven different excitations, as well as respective inelastic static analysis taking into account torsional effects were performed. The results are examined regarding structural (global) and member (local) response and various issues concerning the adequacy of the original elastic design and the applicability of advanced analysis methods are discussed.     

Dome of the Basilica of Santa Maria Degli Angeli in Assisi: Static and Dynamic Assessment

This study presents the results of the static and dynamic assessment of the dome of the Basilica of Santa Maria degli Angeli in Assisi, designed by Galeazzo Alessi. The first section is devoted to an overview of the masonry domes designed by the Italian architect and focuses on the structural solutions adopted in the several cases described to better understand Alessi’s designing skills. In the second part, the drum-dome system is analyzed in order to attain a structural assessment. The static assessment is performed by means of limit analysis and finite element model approaches with non-linear mechanical behavior. The obtained results are consistent with the detected crack pattern and confirm the suitability of the reinforcement steel rings applied to the drum. The seismic assessment has been performed by response spectrum analysis. Due to the lack of specific information, a probabilistic approach for the material mechanical properties was used. The results obtained highlight an adequate seismic response of the structure that can be attributed to the dynamic properties of the slender drum-dome system. This finding justifies the good performance of the structure during the seismic events of 1832 and 1997.     

Subsoil Interventions Effect on Structural Seismic Response. Part II: Parametric Investigation

In the present article the effect of subsoil interventions on the response of soil-structure systems under strong earthquake shaking is studied. Several idealized configurations of commonly applied as well as innovative intervention techniques are examined, referring to increased or reduced stiffness of the initial subsoil conditions of the subsoil-foundation-structure system. Numerical analysis utilizing validated simulation procedures covers a large spectrum of structures and soil conditions. A parametric investigation of several key factors is also conducted. A comparative evaluation of the results in time and frequency domain is aiming in generalizing the conclusions to several earthquake and soil-structure combinations. Obtained results reveal a rather detrimental effect of the stiffness-increasing methods, whereas techniques related to modification of oscillation dynamic properties with flexible subsoil intervention schemes, present promising alternatives for an efficient mitigation of structural response to strong earthquakes.     

TORSIONAL EFFECTS IN THE PUSHOVER-BASED SEISMIC ANALYSIS OF BUILDINGS

The general trends of the inelastic behaviour of plan-asymmetric structures have been studied. Systems with structural elements in both orthogonal directions and bi-axial eccentricity were subjected to bi-directional excitation. Test examples include idealised single-storey and multi-storey models, and a three-storey building, for which test results are available. The response in terms of displacements was determined by nonlinear dynamic analyses. The main findings, limited to fairly regular and simple investigated buildings, are: (a) The amplification of displacements determined by elastic dynamic analysis can be used as a rough, and in the majority of cases conservative estimate in the inelastic range, (b) Any favourable torsional effect on the stiff side, which may arise from elastic analysis, may disappear in the inelastic range. These findings can be utilised in the approximate pushover-based seismic analysis of asymmetric buildings, e.g. in the N2 method. It is proposed that the results obtained by pushover analysis of a 3D structural model be combined with the results of a linear dynamic (spectral) analysis. The former results control the target displacements and the distribution of deformations along the height of the building, whereas the latter results define the torsional amplifications. The proposed approach is partly illustrated and evaluated by test examples.     

Structural Identification of a Masonry Tower Based on Operational Modal Analysis

A wide program of structural assessment has been carried out by Politecnico di Milano on the historic bell tower of the church Chiesa Collegiata in Arcisate (Varese, northern Italy). Within this context, the first part of the article summarizes the results obtained from the application of the stochastic subspace identification method to ambient response data collected in two dynamic tests, carried out in June 2007 and June 2008. Next presented is the vibration-based methodology developed for the calibration of a three-dimensional finite element model of the tower, consisting in the successive application of systematic manual tuning, sensitivity analysis, and simple system identification algorithm.     

METHODOLOGY FOR THE PROBABILISTIC ASSESSMENT OF q FACTORS. A DAMAGE INDEX APPROACH

The objective of the present work is to present a methodology for the identification of relevant limit states, namely ultimate limit states leading to structural collapse, and for the assessment of design q factors (or force reduction factors) for reinforced concrete structures under seismic loading. It follows a probabilistic approach based on damage indices. The utilised nonlinear models, as well as the damage indices, which are those proposed by Miner and by Park and Ang, are.described. The methodology of analysis is presented emphasising its probabilistic characteristics. Some parametric studies are carried out, including the analysis of one regular plane frame reinforced concrete structure, designed for three different ductility classes (those proposed by Eurocode 8) and assuming different q factors in design. Results show how the chosen damage indices can be used as parameters to characterise the structural response and how the proposed methodology can be used to assess the design q factors. It is also shown that, for moderate seismic input, the three ductility classes are essentially equivalent in terms of maximum damage indices, but that for higher seismic levels the differences are evident, justifying the use of different q factors.     

Analytical Seismic Assessment of a Tall Long-Span Curved Reinforced-Concrete Bridge. Part II: Structural Response

The seismic assessment of special bridges, even under the hypothesis of full knowledge of site conditions, structural characteristics, and seismic activity at their location, is not an easy and straightforward task due to the complexities and uncertainties related to the finite-element modeling approaches, structural loading scenarios, and seismic analysis methodologies. In this article, a series of nonlinear static and dynamic finite-element analyses on the Mogollon Rim Viaduct are performed with consideration of both uniform and conditionally simulated non-uniform seismic motions. The failure modes of the bridge using different numerical modeling approaches are discussed, and the degree of sensitivity of its response to the different seismic assessment strategies is evaluated. The effect of the multi-component, multi-support and multi-directional excitations of ground motions on the design and response are studied, and the pros and cons of the commonly used structural analysis methodologies of bridges are also addressed. The numerical results of the present study provide a deeper insight into the nonlinear behavior of curved reinforced-concrete bridges, and suggest practice-oriented approaches for their seismic assessment.     

DEVELOPMENT AND VERIFICATION OF A DISPLACEMENT-BASED ADAPTIVE PUSHOVER PROCEDURE

In this paper, an innovative displacement-based adaptive pushover procedure, whereby a set of laterally applied displacements, rather than forces, is monotonically applied to the structure, is presented. The integrity of the analysis algorithm is verified through an extensive comparative study involving static and dynamic nonlinear analysis of 12 rein-forced concrete buildings subjected to four diverse acceleration records. It is shown that the new approach manages to provide much improved response predictions, throughout the entire deformation range, in comparison to those obtained by force-based methods. In addition, the proposed algorithm proved to be numerically stable, even in the highly inelastic region, whereas the additional modelling and computational effort, with respect to conventional pushover procedures, is negligible. This novel adaptive pushover method is therefore shown to constitute an appealing displacement-based tool for structural assessment, fully in line with the recently introduced deformation- and performance-oriented trends in the field of earthquake engineering.     

EVALUATION OF BINDER/AGGREGATE RATIOS IN ARCHAEOLOGICAL LIME MORTARS WITH CARBONATE AGGREGATE: A COMPARATIVE ASSESSMENT OF CHEMICAL,MECHANICAL AND MICROSCOPIC APPROACHES*

This paper reports on the comparative evaluation of traditional and innovative methods for the investigation of mortar technology. Preliminary results of various approaches to determining the mix proportions in lime mortars with carbonate aggregate are presented. Quantitative analysis was tested on ad hoc prepared mortars of known composition containing carbonate aggregates of different origin (travertine and Bath limestone). Wet chemical methods, manual disaggregation and Digital Image Analysis of thin sections and cross‐sections stained with Alizarin Red S were tested. The advantages and drawbacks of the different approaches are discussed, and applications to the analysis of archaeological mortars and plasters are highlighted.     

NON-LINEAR SEISMIC RESPONSE OF ECS DESIGNED RC BUILDING STRUCTURES

In this paper, results of an analytical study on the non-linear dynamic behaviour of reinforced concrete buildings designed according to modern European Codes (Eurocode 8) are presented. An investigation of the seismic performance of 8-storey regular and irregular buildings is carried out. The study is aimed at evaluating their seismic structural performance with a focus on the influence of several design parameters used in the code affecting non-linear response. Towards this aim, use is made of a suite of spectrum-compatible artificial accelerograms. It is concluded that EC8 provisions, although correct in principle, are conservative, at least for the structures and input motions considered, in view of the very low predicted damage levels observed in most cases.     

中国旅游业资本流动与生产率演化——基于DSSA方法的结构效应分析

在中国旅游业转型升级的重要时期,开展全国及31个省份旅游产业结构变动与生产率演化的研究具有显著的理论与现实意义。鉴于结构变动是影响生产率增长的一个重要因素,本文运用DSSA方法对全国及31个省份2000年—2016年旅游业资本生产率增长率进行分解,测度产业结构变动的生产率增长效应。结果发现,不同地区或省份之间表现出较大差异。在年度静态结构效应上,东部地区开放型旅游经济较为发达,各省份总体发展态势较为稳定,伴有阶段性波动;中部地区旅游经济相对闭塞,各省份总体发展的平稳性最差,波动性介于东部地区与西部地区之间;西部地区在大开发背景下旅游经济增长较快,各省份总体发展的平稳性介于东部地区与中部地区之间,波动性最大。在年度动态结构效应上,全国大部分省份在大部分年份都出现“结构负利”,动态结构能力亟须改善。尽管各省份表现出差异化的静态结构能力和动态结构能力,但是我国整体旅游产业结构升级与旅游经济增长的发展态势相耦合。本文的结构效应分析结果可为东部、中部和西部地区及不同省份旅游业转型升级提供理论依据和决策参考。     

Rocking of Non-symmetric Rigid Blocks in Buildings Considering Effects Associated with Dynamic Soil-Structure Interaction

A dynamic model for the estimation of the rocking and/or overturning response of a free-standing non-symmetric rigid block considering rotational and horizontal excitation is proposed. The block is situated at different levels of a building with flexible base subjected to earthquakes. Base flexibility introduces the rotational component of the excitation due to dynamic soil-structure interaction (DSSI). The model is used to assess the influence of the dynamic soil-structure interaction on the behavior of the block. An illustrative example of the proposed model for non-symmetric rigid blocks in 5-, 10-, and 15-story buildings located in soft soils considering earthquakes from different seismic sources is presented. Results show that it is important to consider kinematic effects as well as inertial effects of DSSI in the dynamic response of contents. The influence of base flexibility depends on the change of spectral intensities associated to the increase of the building structural period and is larger for higher building levels.     

Application of Endurance Time Analysis in Seismic Evaluation of an Unreinforced Masonry Monument

In this article, seismic behavior of the main dome of a well-known middle-eastern historical- monument, “Imam Reza Shrine” (Mashhad, Iran) which is located in a high seismic area in Iran is evaluated. This study focuses on the response history analysis using intensifying dynamic excitations in the framework of Endurance Time Method. Endurance Time Analysis gives acceptable results for a wide range of earthquake intensities and considerably reduces the computational demand in comparison to the conventional Time History Analysis and Incremental Dynamic Analysis. The aim of this study is to investigate the applicability and efficiency of Endurance Time Analysis for masonry monuments and to suggest modifications and interpretations to improve compatibility of the results with Time History Analysis. In addition, to facilitate evaluation of the structural behavior, a dimensionless index, Cumulative Plastic Strain Index, is proposed as a criterion to compare structural performance in terms of the severity and the extent of damage as a function of earthquake intensity.