故宫灵沼轩的动力特性及抗震性能研究

故宫灵沼轩是我国最早建造的钢铁-砌体组合结构之一,具有重要的历史、艺术和科学价值。为了评估灵沼轩在地震作用下的结构安全状况,建立了灵沼轩结构的三维有限元模型,并对其进行了动力特性和地震时程分析,得出了其固有频率、模态振型、地震位移响应和地震应力响应。结果表明:灵沼轩整体结构布置对称性较高,扭转刚度较大,对抗震较为有利;在8度多遇地震、设防地震和罕遇地震作用下,灵沼轩的金属结构部分及砌体结构部分的顶点位移和层间位移角均符合现行规范要求,砌体结构部分的第三主应力响应均小于材料的抗压强度,不存在压溃风险。在8度多遇地震和设防地震作用下,砌体结构部分的第一主应力响应均小于材料的抗拉强度,结构不会发生拉裂。但在8度罕遇地震作用下,砌体结构的部分位置拉应力超过材料的抗拉强度,这些位置存在开裂危险。最后,综合动力特性和抗震性能分析的结果,提出了灵沼轩的抗震加固建议。     

Seismic Resistant Effects of Composite Reinforcement on Rockfill Dams Based on Shaking Table Tests

In this article, the seismic resistant effect of a new reinforcement measure on rockfill dams, the Composite Reinforcement, is investigated based on 1-g large-scale shaking table tests. A 1 m high rockfill dam, which is scaled from the Yele rockfill dam in China, is tested by inputting a series of motions designed from a realistic Wenchuan earthquake record. The model dam is divided into two sections, with one section representing a normal rockfill dam (RD) while the other section employing the Composite Reinforcement (composite reinforced rockfill dam (CRRD)). The seismic-resistant effect of the Composite Reinforcement is investigated by comparing the recorded dynamic response of the two dams, in terms of the peak acceleration amplification factor distribution along the dam core, the crest settlement, and the visualized failure pattern. Results show that the application of the Composite Reinforcement can effectively mitigate the seismically induced deformation of the rockfill dam by reducing the peak crest acceleration and residual crest settlement by 18% and 55%, respectively, when subjected to a 0.5 g input motion. The investigation of the captured failure pattern on the two dams further indicates the effective reinforcing effect of the Composite Reinforcement on preventing the sliding failures of rockfill materials in the top 20% height of the dam body.     

Dynamic Characteristic Analysis of Two Adjacent Multi-grid Composite Wall Structures with a Seismic Joint by a Bayesian Approach

Field ambient vibration tests and modal identification using a Bayesian approach are conducted for a building made of multi-grid composite wall structure and divided into two adjacent parts by a seismic joint, to investigate the dynamic characteristics of the special structural type and the effects of the infilled seismic joint. It is found that dynamic interactions between the two structural parts exist possibly induced by the infill of the building separation. Natural frequencies obtained from other two modal parameter identification methods and modal analysis results of finite element models considering dynamic interactions agree with those identified by the Bayesian approach.     

故宫灵沼轩残损分析及结构性能研究

故宫灵沼轩是我国最早建造的钢铁-砌体组合结构之一,目前损坏较为严重。为更好地保护和修缮该建筑,残损分析和结构性能研究是其修缮保护的科学基础。首先通过现场调研,对该建筑的残损状况进行分析,找出其显见的病害;然后通过精确测绘、材料检测及有限元模拟分析其结构性能,找出其隐在的病害;最后综合残损分析及结构性能分析结果,提出相应的保护措施建议。     

Modified Full Operator Hybrid Simulation Algorithm and its Application to the Seismic Response Simulation of a Composite Coupled Wall System

A new version of the Full Operator Method (FOM) is proposed in this work. The numerical characteristics of the modified FOM (mFOM) are investigated, both theoretically and analytically. It is found that mFOM is unconditionally stable when the estimated stiffness of the structure is larger than or equal to the actual stiffness. Simulations using two numerical examples are carried out to demonstrate the capability of the mFOM. The seismic response simulation of a composite coupled wall system suggests that the mFOM is capable of generating reasonably accurate solutions despite the presence of structural complexity, material nonlinearity, and displacement control errors.     

Experimental Study on Seismically Resilient Two-Span Bridge Models Designed for Disassembly

Shake-table studies were conducted on a ¼-scale, 2-span bridge model incorporating a newly-developed concept of replaceable plastic hinges and columns that can be easily assembled and disassembled. The plastic hinges incorporate novel materials that mitigate column damage and permanent drift, allowing the bridge to undergo intense seismic shaking and remain operational when most conventional bridges would warrant demolition. Designed to be disassembled, the column components have the potential to be reused, which is intended to help mitigate the environmental impact from material extraction and manufacture. The concept feasibility was demonstrated by assembling, testing, and disassembling the same bridge model twice.     

Hard core and cutting edge: experimental manufacture and use of Magdalenian composite projectile tips

The technology of the European Upper Palaeolithic yielded abundant evidence of the use of composite projectile heads, in the form of osseous points on the side of which one or several (micro)lithic elements are attached. Yet, little experimental work has been devoted to testing and assessing the parameters of use of this type of composite tips. In this paper we present a pilot experiment with replicas of Magdalenian composite spear tips, made of an antler point with one or two rows of flint backed bladelets. Two series of replicas were manufactured after the lithic and osseous record of, respectively, the Lower Magdalenian from southwest France (c. 20–18 Ky cal BP) and the Upper Magdalenian of Pincevent in the Paris Basin (c. 15–14 Ky cal BP). The 34 experimental composite heads were hafted to spears that were then shot with a spearthrower at the carcasses of two young deer. The results provide some insight into the performance characteristics of the osseous and lithic components, both in efficiency and durability. Finally, possible improvements of the experimental protocol are discussed, as well as the implications of our results for the understanding of projectile point variability in the Upper Palaeolithic.     

水平地震作用下大式带斗栱木结构古建筑的抗倒塌性能分析

基于根据宋代《营造法式》制作的某单层单开间殿堂式木结构振动台模型,建立了考虑柱础滑移隔震、榫卯半刚性连接及斗栱减震性能的空间杆系有限元模型。通过模型的数值计算值与振动台实测数据之间的对比分析,验证了建模方法的正确性。提出了柱脚滑移倒塌的相对位移判定准则及柱架层间倒塌的最大层间位移角判定准则,并采用增量动力分析(IDA)方法对这两种倒塌机制进行研究。结果表明:木结构古建筑在普通地震波作用下不易出现柱脚滑移倒塌;层间倒塌为长周期地震波作用下最易出现的倒塌机制;相对于普通地震波而言,木结构古建筑受长周期地震波作用的影响更大。     

Temporal change in groundwater level following the 1999 (Mw = 7.5) Chi-Chi earthquake, Taiwan

We examine the post‐seismic change in the groundwater level following the 1999 (M_w = 7.5) Chi‐Chi earthquake in central Taiwan, as recorded by a network of 70 evenly distributed hydrological stations over a large alluvial fan near the epicenter. Four types of post‐seismic responses may be distinguished. In type 1, the groundwater level declined exponentially with time following a coseismic rise. This was the most common response in the study area and occurred in unconsolidated sediments on the Choshui River fan. In type 2, the groundwater level rose exponentially with time following a coseismic fall. This occurred in the deformed and fractured sedimentary rocks in the foothills near the Chelungpu fault that ruptured in the Chi‐Chi earthquake. In type 3, the groundwater level continued to decline with time following a coseismic fall. This also occurred in the deformed and fractured sedimentary rocks near the ruptured fault. Finally, in type 4, the groundwater level, following a coseismic rise, stayed at the same level or even rose with time before it eventually declined. This occurred mostly in unconsolidated sediments along the coast of central Taiwan and along the Peikang Stream. We analyze these post‐seismic responses by using a one‐dimensional model. Together with the results from well test, the analysis show that the type 1 response may be explained by an aquifer model with coseismic recharge and post‐seismic subhorizontal discharge across a length of 500–5000 m; the type 2 response may be explained by a model of coseismic discharge and post‐seismic recharge from surface water; the type 3 response may be explained by a model of coseismic discharge and post‐seismic subhorizontal discharge across a length of 500–5000 m; and the type 4 response may be explained by a model of coseismic recharge and sustained post‐seismic recharge from surface water. The characteristic time for the post‐seismic changes is similar to that for the groundwater‐level decline during dry seasons before the earthquake, suggesting that there was no earthquake‐induced changes in the aquifer properties (i.e. hydraulic conductivity), confirming the earlier results from recession analyses of the post‐seismic streamflow elsewhere after several earthquakes.     

Composite Bows from Uch-kurbu in Kyrgyzstan

The article addresses the topic of composite bows from nomadic sites in Tien Shan and Zhetysu. Horn plates from bows discovered in 2008–2009 at Uch-Kurbu on the Tosor River, the Issyk-Kul Depression (Kyrgyzstan), are described and analyzed. The original design of the wooden core of the bow and the location of horn plates thereon are reconstructed. Based on our earlier classification of weapons, these are composite bows of the Xiongnu-Xianbei period. Two subtypes are identified, based on the design of plates at the ends of the bow. Evidently, composite bows with end, medio-lateral, and medio-frontal plates were the most efficient range weapon of the period.     

TUNING OF SEISMIC HAZARD ESTIMATES BY MEANS OF OBSERVED SITE INTENSITIES

Probabilistic seismic hazard is usually assessed by means of computer codes using seis-mogenic sources, parametric catalogues, seismicity rates and attenuation relationships. All these ingredients are conditioned by expert judgement that influences the final results. Even the attenuation relationships, though strictly based on experimental data, are considered a weak point due to the difficulty of modelling the interaction between seismic energy radiation and site response, and because earthquakes do not usually repeat themselves according to one theoretical model. Recently, methods making wide use of site intensity data have been developed in regions such as Italy, where the observed seismic history at selected sites is quite exhaustive. We analyzed these observations to assess seismic hazard at about 600 sites. We used a probabilistic counting technique, integrating the observations (when necessary), with computed shakings obtained from a logistic-type attenuation model. The results were then compared with the estimates provided by the recent seismic hazard map of Italy, compiled according to the traditional probabilistic seismic hazard approach. The match shows significant differences for some sites. A tentative explanation which seems to point to three alternatives is provided: (1) The mismatch between the two methodologies might appear because the stationary assumption has a poor fit with reality (at least in certain areas); (2) Some sites show a response that is systematically different from the average values predicted using attenuation relationships; (3) The definition of seismogenic zones leads to a bias in the seismicity rate estimate.     

Seismic behavior of two Portuguese adobe buildings: part II —numerical modeling and fragility assessment

Considering the likely unfavorable behavior under seismic action of adobe construction, this article aims at providing a seismic fragility characterization of two adobe Portuguese traditional buildings, using numerical models calibrated over experimental results. The study of such two case-study buildings in the region of Aveiro contributes to the understanding of the seismic fragility of adobe construction in the region in general. The buildings were numerically modeled to estimate their structural behavior under seismic loading using adobe material properties that were calibrated based on the experimental results of a cyclic in-plane test of a full-scale double-Tshaped adobe wall. The method chosen to characterize adobe masonry and model its nonlinear behavior followed a total strain crack-based macro-modeling (TSCM) approach, whereas pushover analysis was carried out to reproduce the pseudo-static experimental test in order to enable a refined calibration of adobe masonry mechanical properties. Fragility functions were then derived, based on the above-mentioned numerical models, using nonlinear static analysis, bringing further insight on the seismic fragility of traditional Portuguese adobe construction.     

Composite projectiles and hafting technologies at Ohalo II (23 ka,Israel): analyses of impact fractures,morphometric characteristics and adhesive remains on microlithic tools

This study focuses on the correlation between the production of backed microliths in the Levant during the late Upper Palaeolithic and their use as side elements of composite projectile weapons. The investigation is based on assemblage sample of microliths from Ohalo II, a 23,000 years old submerged campsite, and involves analyses of diagnostic impact fractures, location of adhesive remains and morpho-metric characteristics of the tools. Two distinct adhesive materials have been also analyzed, and the preliminary results indicate the use of both calcareous and organic substances.     

Seismic Tests and Numerical Modeling of a Rolling-ball Isolation System

For the seismic isolation of light structures, the use of laminated rubber bearings is neither economical nor, for most cases, technically suited. For the isolation of this type of structure a new system, consisting of steel balls rolling on rubber tracks, has been developed at TARRC (Tun Abdul Razak Research Centre).

This article presents the results of experimental tests carried out for the characterization of the behavior of this new device. A numerical model is also proposed that can be used to assess the seismic response of structures with this isolation system.

Comparison of the predictions of the numerical model with the experimental data shows that the model is adequate to perform the correct assessment of the seismic response of isolated structures. The results of the experimental campaign of shaking-table tests, as well as the numerical simulations, show that there is an effective reduction of the acceleration levels induced in the isolated structures.     

北京昌平沙河镇出土蜻蜓眼玻璃珠的科学分析与研究

为探讨北京昌平沙河镇墓葬出土的三枚蜻蜓眼玻璃珠的质地和来源,利用X射线衍射分析（XRD）、激光拉曼光谱分析（LRS）、便携式能量色散X射线荧光分析（PXRF）三种无损分析方法,对玻璃珠基体和眼珠分别进行了结构和化学组成的无损伤测试。结果表明,这三枚蜻蜓眼珠的基质为玻璃态物质,其化学成分表明该玻璃属于钠钙硅酸盐（Na₂OCaOSiO₂）系统;Cu和Co是主要的着色元素。考虑到三枚珠子采用的钴料成分为高铁低锰的进口钴料,同时通过与国内外相似珠子的对比,推测这三枚蜻蜓眼玻璃珠是外国进口物的可能性较高。蜻蜓眼玻璃珠所在墓葬群虽为清代,但根据初步的分析研究可推断,墓主通过收藏或其他途径获得并将其作为随葬品。     

A Novel Procedure for Simplified Nonlinear Numerical Modeling of Structural Units in Masonry Aggregates

ABSTRACT

Historical centers are always composed of masonry building aggregates often designed without respecting seismic design criteria. The current seismic Italian code does not foresee a clear calculation method to predict their static nonlinear behavior. For this reason, in this article the seismic response of structural units into masonry aggregates has been predicted through a simplified modeling approach. The implemented procedure has been calibrated on the results of a numerical model performed by using the Equivalent Frame Method (EFM), implemented within a Finite Element Method (FEM) calculation program, used to investigate a basic building compound representative of the constructive techniques developed in the past decades in the Southern Italy.

First, the whole aggregate has been modeled and analyzed in the nonlinear static field in order to evaluate the seismic behavior of both intermediate and head structural units.

Later on, the seismic response of these structural units, considered as isolated structures, has been assessed by considering in simplified way their position in the aggregate, as well as the influence of other constructions.

Finally, the achieved results on the above single analysis cases have been compared with those deriving from the investigation of the whole building compound, allowing to confirm the effectiveness of the proposed novel analysis procedure.     

故宫地下库房文物储藏柜防震措施研究

故宫地下文物库开建于1986年,年代久,防震问题较为突出。为更好解决库房改造中遇到的困难,结合库房现状,研究提出了一种相对较适宜的防震措施。方案里提供的装置主要由夹头、导杆以及阻尼板组成,构造简单且便于安装。为评估其抗震效果,建立了有限元分析模型,并选取了三条地震波进行时程分析。从结果中发现:故宫库房内的独立储藏柜抗震性能较差,九度罕遇地震作用下,储藏柜摇摆剧烈,甚至发生了倾覆。而采用装置后,组合双柜能通过增大的滑移距离更好地耗散掉地震能量,摇摆幅度均明显降低,最大仅为1.64°(El Centro波)。因此,分析结果验证了装置的抗震有效性。