SEISMIC HAZARD ASSESSMENT OF UNITED ARAB EMIRATES AND ITS SURROUNDINGS

This paper presents the seismic hazard assessment and seismic zoning of the United Arab Emirates (UAE) and its surroundings based on the probabilistic approach. The area that has been studied lies between 50°E-60°E and 20°N-30°N and spans several Gulf countries. First, the tectonics of the area and its surroundings is reviewed. An updated catalogue, containing both historical and instrumental events is used. Seismic source regions are modelled and relationships between earthquake magnitude and earthquake frequency is established. A modified attenuation relation for Zagros region is adopted. Seismic hazard assessment is then carried out for 20 km interval grid points. Seismic hazard maps of the studied area based on probable Peak Ground Acceleration (PGA) for 10% probability of exceedance for time-spans of 50, 100 and 200 years are shown. A seismic zone map is also shown for a 475-year return period. Although the results of the seismic hazard assessment indicated that UAE has moderate to low seismic hazard levels, nevertheless high seismic activities in the northern part of UAE warrant attention. The northern Emirates region is the most seismically active part of UAE. The PGA on bedrock in this region ranges between 0.22 g for a return period of 475 years to 0.38 g for a return period of 1900 years. This magnitude of PGA, together with amplification from local site effect, can cause structural damage to key structures and lifeline systems.     

Shaking Table Testing of a Full-Scale Prefabricated Three-Story Timber-Frame Building

Shake table tests were carried out on a 7 m × 5 m three-story, timber light-frame building (7.5 m height) at the TreesLab laboratory (Eucentre) in Pavia. The aim of the research was to evaluate the seismic behavior of a typical Italian prefabricated timber building and to study the interaction between the individual structural components tested in quasi-static manner in a previous experimental study. The 1979 Montenegro Earthquake ground motion, recorded at the Ulcinj-Hotel Albatros station, was selected as the ground motion for seismic tests. The maximum peak ground acceleration was scaled to 0.07 g, 0.27 g, 0.5 g. 0.7 g, and 1 g in order to evaluate the building’s performance at different levels of seismic input. More than 100 instruments were used to monitor the behavior of the building during seismic tests measuring acceleration, displacement, and forces. The visual inspection shows that the building did not show any damage during all seismic tests. However the data analysis (dynamic identification, capacity spectrum, inter-story drift) confirm that during the 1.00 g test the structure went beyond its linear elastic limit. The results obtained from this experimental study suggest that the design hypotheses commonly adopted in practice for seismic analysis (e.g., in terms of force distributions between the walls, and also the behavior factor q) are not always consistent with the real behavior of timber frame multi-story buildings, and should be backed by more accurate knowledge of the contributions of the individual structural components.     

Seismic Vulnerability Assessment of Hybrid Steel-Timber Structure: Steel Moment-Resisting Frames with CLT Infill

In this article, seismic vulnerability assessment is carried-out on a novel hybrid structure (steel moment resisting frame (SMRF) and cross laminated timber (CLT) infill panels). For the seismicity of Vancouver, Canada, a three-bay, 3-, 6-, and 9-story height SMRFs are designed for two ductility levels (ductile and limited ductility). To study the seismic vulnerability CLT infilled building, parametric analysis was performed by varying infill configuration (bare frame, one-bay infilled, two-bay infilled, and fully infilled). The structure is modeled in OpenSees and nonlinear dynamic analysis is performed. Peak inter-story drift demand and corresponding FEMA performance limits (capacity) values are used to compute the corresponding fragility curves. From the analyses, it can be seen that as more bays are infilled, the fundamental period and seismic vulnerability is reduced significantly. The results highlight that, within the performance-based earthquake engineering, different objectives can be met with varying the CLT configuration.     

Attenuation Relationships for Iran

The purpose of this study is to derive the attenuation relationships for PGA, PGV, and EPA parameters for areas within the seismic zones of Zagros, Alborz and Central Iran with rock and soil substructures. In order to do so, at first the available scientific data including the methods used for deriving attenuation relationships and the parameters involved have been gathered. Afterwards, all the efforts have been focused on gathering a thorough catalogue of earthquakes occurred in Iran. In this regard, a majority of the available catalogs in Iran have been gathered and corrected through different methods and finally a set of 89 earthquake events including 307 earthquake records with reliable data was chosen.

Since in order to derive the attenuation relationships it is essential to extract the parameters from the acceleration records, a great effort was placed on gathering the earthquake acceleration records of Iran. This resulted in building a database of a majority of the earthquake records up to the year of 2004. Afterwards, correction methods applicable to earthquakes records of Iran considering the type of machines used and the ground type were examined which resulted in certain guidelines for correction of earthquake acceleration record data related to Iran.

In the next step the needed parameters were extracted from the earthquake acceleration record data which were consequently divided into two seismic zones of Zagros, and Alborz and Central Iran according to tectonic conditions. After examination of the parameters and choosing the most appropriate among them, the attenuation relationships were derived for such parameters.     

Shaking Table Model Test of a Steel-Concrete Composite High-Rise Building

Shaking table tests were conducted on a 1/20 scaled-model of a 25-story steel-concrete composite high-rise building, composed of steel frame (SF) and concrete tube (CT). The seismic behavior of the model was investigated with the increasing of table-input acceleration amplitudes. It has been found that the seismic failure of the model concentrated on the shear walls and corner columns at the lowest story of the CT as well as the joints between the SF and the CT. Even subjected to extremely strong earthquakes, due to effective composite action, the composite model was able to support its weight to prevent collapse.     

故宫灵沼轩的动力特性及抗震性能研究

故宫灵沼轩是我国最早建造的钢铁-砌体组合结构之一,具有重要的历史、艺术和科学价值。为了评估灵沼轩在地震作用下的结构安全状况,建立了灵沼轩结构的三维有限元模型,并对其进行了动力特性和地震时程分析,得出了其固有频率、模态振型、地震位移响应和地震应力响应。结果表明:灵沼轩整体结构布置对称性较高,扭转刚度较大,对抗震较为有利;在8度多遇地震、设防地震和罕遇地震作用下,灵沼轩的金属结构部分及砌体结构部分的顶点位移和层间位移角均符合现行规范要求,砌体结构部分的第三主应力响应均小于材料的抗压强度,不存在压溃风险。在8度多遇地震和设防地震作用下,砌体结构部分的第一主应力响应均小于材料的抗拉强度,结构不会发生拉裂。但在8度罕遇地震作用下,砌体结构的部分位置拉应力超过材料的抗拉强度,这些位置存在开裂危险。最后,综合动力特性和抗震性能分析的结果,提出了灵沼轩的抗震加固建议。     

单檐歇山式木构古建抵抗极端烈度地震试验调查研究

为更好地保护我国古建筑,基于《单檐歇山式古建筑抗震性能振动台试验》的相关成果,研究了强震作用下我国明清官式木构古建的抗震性能,制作了与该论文相同的试验模型,进行了振动台试验。通过对模型输入烈度逐渐增强的1940年El-centro波,并考虑地震波为水平双向作用,分析了强震作用下不同构造的试验现象,开展了详细的震后调查,获得了不同构造在强震作用下的抗震性能和震害机制。结果表明:强震作用下,我国明清官式木构古建的振动形式表现为柱架、斗拱、梁架及屋顶的近似同步往复摇摆;主要震害包括柱底偏移、榫卯节点开裂、拔榫、斗拱偏移及错位、额枋-垫板分离、墙体倒塌等,但承重木构架受损不严重,结构未产生倒塌。其良好抗震性能的原因与古建筑的构造特征密切相关。     

Seismic Response of a Four-Story Miniature Building with Replaceable Plastic Hinges

To emphasize on linear and nonlinear seismic behavior of building systems in education, a four-story miniature moment-resisting frame steel building was designed, built, and tested in a shaking table at the Structures Laboratory of the Department of Civil Engineering at the University of Canterbury, New Zealand. A prominent feature of the building is the incorporation of elements designed to form plastic hinges that can be easily replaced after a test with minimum effort and at a very low cost. This model is mainly aimed at education in undergraduate and graduate structural dynamics/earthquake engineering courses and it has also been used to support research. This article describes in detail the main features of the building, its design, and discusses the response of the building to two input ground motions. Because the use of pushover analyses is becoming an industry standard, the some relevant results will be compared with those predicted by such kind of analyses. This article is written in very simple terms and is aimed at the undergraduate and graduate student, at educators in structural design and at structural engineers involved in seismic design of building structures. This article covers many aspects that are seldom highlighted in building behavior to earthquake excitation and that are not always covered in design codes or guidelines.     

SEISMIC HAZARD ASSESSMENT OF METROPOLITAN TEHRAN,IRAN

This paper presents a probabilistic seismic hazard assessment of Tehran, the capital of Iran. Two maps have been prepared to indicate the earthquake hazard of Tehran and its vicinity in the form of iso-acceleration contour lines. They display the probabilistic estimate of Peak Ground Acceleration (PGA) over bedrock for the return periods of 475 and 950 years. Tehran is a densely populated metropolitan in which more than 10 million people live. Many destructive earthquakes happened in Iran in the last centuries. It comes from historical references that at least 6 times, Tehran has been destroyed by catastrophic earthquakes. The oldest one happened in the 4th century BC. A collected catalogue, containing both historical and instrumental events and covering the period from the 4th century BC to 1999 is then used. Seismic sources are modelled and recurrence relationship is established. For this purpose the method proposed by Kijko [2000] was employed considering uncertainty in magnitude and incomplete earthquake catalogue. The calculations were performed using the logic tree method and three weighted attenuation relationships; Ramazi [1999], 0.4, Ambraseys and Bommer [1991], 0.35, and Sarma and Srbulov [1996], 0.25. Seismic hazard assessment is then carried out for 12×11 grid points using SEISRISK III. Finally, two seismic hazard maps of the studied area based on Peak Ground Acceleration (PGA) over bedrock for 10% probability of exceedance in two life cycles of 50 and 100 years are presented. The results showed that the PGA ranges from 0.27(g) to 0.46(g) for a return period of 475 years and from 0.33(g) to 0.55(g) for a return period of 950 years. Since population is very dense in Tehran and vulnerability of buildings is high, the risk of future earthquakes will be very significant.     

Characterization of timber masonry walls with dynamic tests

Timber-framed wall buildings are seen all over Europe, especially in seismic regions, given its adequacy to resist earthquakes. The “Pombalino” buildings, developed after the great 1755 earthquake that destroyed Lisbon, constitute one of the best examples of historic seismic-resistant structures based on timber-framed masonry walls. The research presented in this article aimed at experimentally evaluating the seismic behavior of the “Pombalino” buildings. The experimental program was based on extensive dynamic testing on sub-structures of typical “Frontal” walls (the timber masonry walls), carried out at the LNEC (the Portuguese National Laboratory of Civil Engineering) shaking table. The tests comprised (a) seismic tests, in which the seismic action was applied with increasing amplitude in one direction; and (b) dynamic identification tests, aiming at evaluating the dynamic properties of the sub-structures and their evolution with damage accumulation.     

Experimental Study on Self-Centering Concrete Wall with Distributed Friction Devices

A self-centering concrete wall with distributed friction devices is proposed to achieve seismic resilient building structures. Unbonded post-tensioned tendons, running vertically through wall panels, provide a restoring force that pulls the structure back toward its undeformed plumb position after earthquake. Two steel jackets are installed at wall toes to prevent concrete spalling and crushing. Friction devices are distributed between the wall and its adjacent gravity columns to achieve controllable energy dissipation, and these devices are readily replaceable. Desirable self-centering and energy dissipation capacities were observed in low-cyclic loading tests, and influences of various parameters on the hysteretic behavior were investigated.     

Earthquake-Induced Damage Detection in a Monumental Masonry Bell-Tower Using Long-Term Dynamic Monitoring Data

ABSTRACT

This work investigates the use of an advanced long-term vibration-based structural health monitoring tool to automatically detect earthquake-induced damages in heritage structures. Damage produced in a monumental bell-tower at increasing values of the Peak Ground Acceleration (PGA) of the seismic input is predicted by incremental nonlinear dynamic analysis, using a Finite Element model calibrated on the basis of experimentally identified natural modes. Then, predicted damage effects are artificially introduced in the monitoring data to check for their detectability. The results demonstrate that a very small damage, associated to a low intensity and low return period earthquake, is clearly detected by the monitoring system.     

ON THE SEISMIC VULNERABILITY OF EXISTING UNREINFORCED MASONRY BUILDINGS

A large part of the building population in Switzerland is made of unreinforced masonry. For the assessment of the seismic risk the evaluation of the seismic vulnerability of existing unreinforced masonry buildings is therefore crucial. In this paper a method to evaluate existing buildings, which was developed for the earthquake scenario project for Switzerland, is briefly introduced and discussed in more detail for unreinforced masonry buildings. The method is based on a non-linear static approach where the seismic demand on the building is compared with the capacity of the building. In-plane and out-of-plane behaviour are considered. Comparisons with test results from model buildings show that the proposed method suitably forecasts the capacity of a building. Finally, a numerical example of the application of the method to a building in the city of Basel is given.     

Physics-based Simulation and High-fidelity Visualization of Fire Following Earthquake Considering Building Seismic Damage

This work proposes a framework for the physics-based simulation and high-fidelity visualization of fire following earthquake (FFE) considering building seismic damage. The seismic damage of regional buildings is simulated using multiple degree-of-freedom building models in conjunction with nonlinear time-history analysis. In parallel, a high-fidelity visualization is presented to simulate fire spread and smoke effects. A case study of downtown Taiyuan with 44,152 buildings is performed. The results show that the influence of different ground motions and building seismic resistances on fire ignition and fire spread can be taken into account and that the FFE scene can be displayed realistically.     

Pompeii’s Stabian Baths. Mechanical behavior assessment of selected masonry structures during the 1st century seismic events

The eruption of Mount Vesuvius in 79 AD buried and preserved the Stabian Baths building in the exact configuration which the archaeological excavations carried out in the second half of the 19th century recovered. By combining archeologists’ studies with the analysis of deformations and cracking pattern due to the 1st century seismic events, in this article numerical models have been formulated which allowed the formation of some hypotheses coherent on the timeline of the events, the damage to as well as the change of the shape and stylistic language of the thermal building. Specifically, through global seismic analyses and kinematic analyses of masonry portions of the “destrictarium” block, it is proven that during the 1st century not only a sole catastrophic earthquake occurred but, at least, two important seismic events took place.

The purpose of this article is to identify and parameterize the responsible earthquake by the analysis of seismic effects detectable in the damages and archaeological remains of the masonry walls of the Stabian Baths. The identification of the earthquake and the grading of provoked damages represent a useful knowledge tool that provides information about the vulnerability of ancient buildings and can be suitably used also to safeguard architectural heritage from seismic risk.     

A Five-Step Procedure for the Dimensioning of Viscous Dampers to Be Inserted in Building Structures

Viscous dampers have widely proved their effectiveness in mitigating the effects of the seismic action upon building structures. In view of the large impact that use of such dissipative devices is already having and would most likely have soon in earthquake engineering applications, this article presents a practical procedure for the seismic design of building structures equipped with viscous dampers, which aims at providing practical tools for an easy identification of the mechanical characteristics of the manufactured viscous dampers which allow to achieve target levels of performances. Selected numerical applications are developed with reference to simple, but yet relevant, cases.     

A Multidisciplinary Study on the Seismic Vulnerability of St. Agostino Church in Amatrice following the 2016 Seismic Sequence

ABSTRACT

The big earthquake of August 24, 2016 and subsequent major shocks severely damaged many historic villages in Central Italy and dramatically showed the intrinsic vulnerability of the diffused architectural heritage. The St. Agostino church is one of the collapsed historical buildings, being inside the epicentre village of Amatrice. During the long seismic earthquake swarm, progressively the church was damaged and monitored. This multidisciplinary study of the damage of the church includes correlations of all the data derived from three steps geomatics surveys (3D aerial and terrestrial models): the archival drawings and images documenting previous events distressing the building, the previous strengthening intervention, and finally the seismic site response analysis (from Amatrice’s accelerometric station). Through a back analysis carried out by a finite elements model, it was possible to understand the seismic vulnerability of this historical building, in relation to the previous interventions and damage events. The proposed methodology, based on the interdisciplinary data analysis, provides useful information for the next strengthening projects of damaged historical monument.     

A New Seismic Intensity Parameter to Estimate Damage in Buried Pipelines due to Seismic Wave Propagation

A new seismic intensity parameter to estimate damage in buried pipelines due to seismic wave propagation is proposed. This parameter depends on the peak ground velocity (PGV) and the peak ground acceleration (PGA). It is shown that PGV²/PGA is related to displacement, a parameter directly related to ground strain, which is the main cause of buried pipeline damage. For the case of Mexico City, this parameter exhibits higher correlation with damage than PGA or PGV alone. Finally, we presented intensity-damage relations for the Mexico City's primary water system using PGV²/PGA as the measure of seismic intensity.     

Transient and Long-Term Changes in Seismic Response of the Natural Resources Building,Olympia, Washington,due to Earthquake Shaking

The Natural Resources Building (NRB) in Olympia, Washington, was shaken by three earthquakes (Mw = 5.8, 6.8, and 5.0) between 1999 and 2001. Building motions were recorded on digital accelerographs, providing important digital recordings of repeated strong shaking in a building. The NRB has 5-stories above grade with 3 sub-grade levels and a ductile steel-frame elongated in the E-W direction. The upper two floors extend significantly beyond the lower 3 on the southern and eastern sides. N-S motions dominate the fundamental modal vibrations of the building system. In the 1999 Satsop M5.8 earthquake, the frequency of this fundamental system mode was 1.3 Hz during motions of 10% g. The frequency dropped to 0.7 Hz during the 2001 M6.8 Nisqually strong motions. Moreover, the Nisqually recordings reveal both numerous high-frequency transients of up to 0.18 g, several of which are visible on widely spaced sensors, and long-term tilts of some of the sensors. The weaker 2001 M5.0 Satsop earthquake motions showed the frequency remained depressed at less than 1 Hz for the eastern side of the structure, although the western side had recovered to 1.3 Hz. An ambient noise survey in 2008 showed the fundamental frequency of N/S vibrations remains about 1.0 Hz for the eastern side of the building and 1.3 Hz for the western side. These results suggest that in the Nisqually earthquake, the east side of the NRB suffered a permanent reduction in fundamental mode frequency of 37% due to loss of system stiffness by undetermined mechanism.     

基于概率法的木构古建筑地震破坏综合评价方法

为了研究木构古建筑地震破坏状态评估的准确性,应用概率的方法,以结构损伤指数、最大层间位移角作为评价因子,建立了地震破坏综合评价模型,提出了基于概率法的木构古建筑地震破坏综合评价方法。该方法在综合现状分析与实验数据,在一定烈度下计算各种破坏状态等级中每一种破坏状态出现的概率,古建筑地震破坏状态应为概率最大的地震破坏状态,从而比较准确地判别木构古建筑地震破坏程度。并对经受过汶川地震的两种结构形式的古建筑进行了验证,从而验证了该方法的合理性和有效性。这一方法将提高木构古建筑震害预测的准确性,为古建筑抗震加固提供有效的理论支持。