Taphonomic identification of cut marks made with lithic handaxes: an experimental study

Recent experimental studies have developed new diagnostic criteria to differentiate between trampling and cut marks. Within cut marks, these diagnostic criteria have been useful to differentiate between marks made with simple and retouched flakes. The present study expands the application of these criteria using a multivariate analysis to discriminate marks created with handaxes from those made with stone tool flakes. A discriminant analysis resulted in a selection of specific variables, which can successfully differentiate cut marks made with handaxes from those created with retouched flakes in more than 80% of occasions. The utility of this analogical taphonomic signature created by handaxes is discussed in the light of their potential value as butchering tools.     

The origins of lithic projectile point technology: evidence from Africa,the Levant,and Europe

Projectile weaponry is a human cultural universal, but its origins and antiquity remain poorly understood. Stone- and bone-tipped projectile weapons have long been treated as emergent features of the "Upper Paleolithic" behavioral revolution. Recently it has been proposed that projectile technology was in widespread use among Homo sapiens populations in Africa during Middle Stone Age (MSA) times. One obstacle to researching the origins of projectile point technology is that the criteria archaeologists employ for recognizing plausible and implausible stone projectile points are largely subjective (overall tool shape, microwear traces). Tip cross-sectional area (TCSA) is a ballistically significant dimension that works well at discriminating North American stone projectile points (spearthrower dart tips and arrowheads) from spear points. This paper compares the TCSA values of ethnographic North American stone projectile points to hypothetical Middle and Upper Paleolithic stone projectile points from Africa, the Levant, and Europe. The results of this comparison do not support the hypothesis of widespread use of stone-tipped projectiles in Africa, the Levant, or Europe prior to 40 Ka. In the New World and in Australia, where we have the richest ethnographic record of stone projectile point use, these implements are largely employed in big-game hunting and in warfare. One or both of these factors may have played a role in the widespread adoption of stone projectile point technology after 40 Ka.     

The Art of Taphonomy and the Taphonomy of Art: Layer IV,Molodova I,Ukraine

Level IV of Molodova I, an open-air Middle Paleolithic site in the Ukraine has been described by some researchers as a possible source of evidence for early symbolic behavior. We examined bone objects from this layer that were identified by Ukrainian researchers as exhibiting possible Neandertal produced engravings including two anthropomorphic figures. While we have determined that there is no evidence of symbolic activity at Molodova I, the database we have created, with its systematic recording of traces left by taphonomic agents on faunal remains, provides a better understanding of the overall site taphonomy.     

Possible evidence of bone tool shaping by Swartkrans early hominids

Ever since Dart (J. Phys. Anthrop. 7 (1949) 1) interpreted certain bones from Makapansgat as tools, scientific consensus has fluctuated as to whether some bone objects from early hominid sites should be interpreted as artefacts, or the result of non-human taphonomic processes, which are known to produce pseudo-bone tools morphologically similar to human modified or used artefacts. Here we present possible evidence of bone tool shaping from Swartkrans (Members 1–3; ca. 1.8–1.0 Mya). Four horncores and the proximal end of an ulna used as tools in digging activities also have facets covered by parallel spindle-shaped striations characteristic of grinding. Identification of these traces as possibly resulting from deliberate shaping or re-sharpening of the bone tools is based on the characterisation of the use-wear pattern and other taphonomic modifications observed on the Swartkrans bone tools. This interpretation is also supported by the study of the remainder of the horncores from Swartkrans, horncores from other southern African Plio-Pleistocene sites (Sterkfontein, Makapansgat, Gondolin), modern horncores affected by pre- and post-mortem modification, ethnographic, LSA, African Iron Age and experimental bone tools shaped by grinding. These data suggest that early hominids had the cognitive ability to modify the functional area of bone implements to achieve optimal efficiency.     

On bad terms: Problems and solutions within zooarchaeological bone surface modification studies

The identification of butchery marks in the zooarchaeological record has consistently been debated. Much experimental work has been done to understand the causal agents behind some bone surface modifications, but recent controversies show that there is still no consensus. Terminology is not consistent between researchers, and there is ambiguity in how characteristics of marks are described and interpreted. There is also a lack of understanding of what causes individual variables within marks made by different agents, which is compounded by mark morphologies being described in terms that imply their causality. This paper examines these two problems in light of historic and current trends in the taphonomic literature, and recommends ways to describe marks that will facilitate more effective communication between researchers. It is proposed that greater standardisation within zooarchaeology is needed in seven key areas, and that this is the best avenue for moving into a new phase of taphonomic research.     

Application of a new typological approach to classifying denticulate and notched tools: the study of two Mousterian lithic assemblages

Identifying tools by means of morphological attributes are widely used in lithic studies to categorize retouched artifacts from different archaeological periods. This procedure has facilitated the exchange of information between separate researchers and has improved the comparison of different assemblages. In these classifications, denticulates and notched tools have been regularly interpreted as analogues and chronologically unvaried in different and vast territories. Based on the definitions developed by Bordes, the denticulate category has become a catchall for any kind of tool bearing concavities. In this paper a new quantitative approach to the classification of denticulates and notched tools is proposed. The new methodology is based on measuring the length of notches and their distribution on the perimeter of the blank. Analyzing the lithic series of the Abric Romaní rock-shelter (Spain) and Grotta Maggiore di San Bernardino (Italy) led to the identification of 11 redundant forms: eight denticulates and three notched tools. Moreover, the application of Kuhn’s Geometric Index of Unifacial Reduction brought local manufacturing trends to light, calling into question the presumed geographical uniformity of these categories of artifacts.     

安徽东至县华龙洞旧石器时代遗址发掘简报

华龙洞旧石器时代遗址出土了丰富的动物骨骼化石、加工使用痕迹清晰的骨器和百余件石制品。其石制品组合具有旧石器时代晚期工业的特征。动物骨骼化石上同时发现了动物啃咬与人工切割的痕迹,推断该遗址的动物骨骼被人类利用,但人类可能是利用动物残余的食腐者,而非这些动物的狩猎者。     

Identifying sword marks on bone: criteria for distinguishing between cut marks made by different classes of bladed weapons

Swords have been one of the major weapons used in violent conflicts for much of human history. Certain archaeological situations, especially those dealing with the recovery and analysis of battle casualties, may raise questions about what type(s) of bladed weapon was used in a particular conflict (e.g., the battle of Kamakura, Japan, AD 1333; the battle of Wisby, Sweden, AD 1361; the battle of Towton, England, AD 1461). Little work has been done, however, on developing criteria to differentiate sword cut marks from other types of cut marks, or to distinguish between marks created by different sword types. To develop such criteria, bovine tibiae (n = 7) were struck using six different types of bladed weapon and the resulting marks (n = 92) were analyzed. Eight traits describing the morphology of the cut mark – such as shape, the presence and unilateral/bilateral state of flaking and feathering, the presence of bone shards, associated breaks, etc. – are defined and related to blade type used. Sword marks were found to be easily distinguishable from knife marks. The variation in marks made by different sword types is significantly correlated with differences in blade weight (p < 0.0001), grip (p < 0.0113), and sharpness (p ≤ 0.0179). The criteria and analyses developed and implemented in this study will be of use to researchers in forensics and osteoarchaeology who want to infer bladed weapon type from marks on bones.     

Chagyrskaya Cave:A Middle Paleolithic Site In The Altai

This article presents the results of multidisciplinary studies conducted at Chagyrskaya – an Upper Pleistocene karst cave in the northwestern Altai where Middle Paleolithic stone tools and fossil remains of Neanderthals were found. Taphonomic aspects of the site are addressed, and results of science-based analyses including radiocarbon and paleomagnetic dating are presented. The deposits are similar to loess-like Upper Pleistocene loams of Western Siberia. Among the Middle Paleolithic industries of the Altai, the Chagyrskaya industry is paralleled only by that of Okladnikov (formerly Sibiryachikha) Cave. Both represent a local Middle Paleolithic Mousteroid facies, named Sibiryachikha after the eponymous site.     

Middle Stone Age bone tools from the Howiesons Poort layers,Sibudu Cave,South Africa

Recently discovered bone implements from Middle Stone Age (MSA) deposits at Sibudu Cave, South Africa, confirm the existence of a bone tool industry for the Howiesons Poort (HP) technocomplex. Previously, an isolated bone point from Klasies River provided inconclusive evidence. This paper describes three bone tools: two points and the end of a polished spatula-shaped piece, from unequivocal HP layers at Sibudu Cave (with ages greater than ∼61 ka). Comparative microscopic and morphometric analysis of the Sibudu specimens together with bone tools from southern African Middle and Later Stone Age (LSA) deposits, an Iron Age occupation, nineteenth century Bushman hunter-gatherer toolkits, and bone tools used experimentally in a variety of tasks, reveals that the Sibudu polished piece has use-wear reminiscent of that on bones experimentally used to work animal hides. A slender point is consistent with a pin or needle-like implement, while a larger point, reminiscent of the single specimen from Peers Cave, parallels large un-poisoned bone arrow points from LSA, Iron Age and historical Bushman sites. Additional support for the Sibudu point having served as an arrow tip comes from backed lithics in the HP compatible with this use, and the recovery of older, larger bone and lithic points from Blombos Cave, interpreted as spear heads. If the bone point from the HP layers at Sibudu Cave is substantiated by future discoveries, this will push back the origin of bow and bone arrow technology by at least 20,000 years, and corroborate arguments in favour of the hypothesis that crucial technological innovations took place during the MSA in Africa.     

Finding resolution for the Howiesons Poort through the microscope: micro-residue analysis of segments from Sibudu Cave,South Africa

In this paper I present the results of a micro-residue analysis of stone segments, the type fossils of the Howiesons Poort technocomplex in South Africa, with an age of more than 60 ka at Sibudu Cave, KwaZulu-Natal. Fifty-three segments were systematically analysed and 1826 organic micro-residue occurrences were documented on the sample. The distribution patterns of micro-residues and other use-traces are interpreted in terms of hafting and function. It is shown that most of the tools were indeed hafted and most were probably used as inserts for hunting weapons. There is evidence for differences and changes over time in haft materials and hafting configurations of the segments. The study demonstrates how functional studies could improve our understanding of change and variability in human behaviour during the Middle Stone Age, a period that used to be portrayed as static or slow changing.     

The Still Bay points of Blombos Cave (South Africa)

We present the results of a technological and morphometric analysis of all the Still Bay points (n = 371) recovered from the 1993 to 2004 excavations at Blombos Cave. We have been able to reconstruct the manufacturing sequence of the bifacial points from initial shaping, by direct internal percussion, to finished morphology, by direct marginal percussion. Identifications of impact fractures and manufacturing breaks are based on comparisons with experimental and archaeological bifacial points of verified function, i.e. Paleoindian points from bison kill sites, replicates of Solutrean points mounted as spear-heads or arrowheads and shot into adult cattle, and experimental replication on local raw materials. Our analysis shows that: (a) only a minority of the points are finished forms, and that a large number of pieces are production failures, a situation known at bifacial point production sites of later ages; (b) morphometric and impact scar analyses should take into account this process and distinguish finished points from preforms and unfinished points; (c) there were at least three different kinds of raw material sources and that there is a marked increase in the frequencies of silcrete with respect to the M2 and M3 phases at Blombos; (d) three kinds of evidence prove that some of the points were hafted axially and used as spear tips; (e) production of bifacial points was a primary activity at the site but the hypothesis of intergroup exchange of Still Bay points cannot be sustained on the basis of present evidence; and (f) the Still Bay phase appears to initiate a trend to relatively rapid changes in specialized hunting weaponry and that this innovation is congruent with other innovations such as bone tools, shell beads and engraved ochre of the M1 and M2 phases at Blombos.     

The Taphonomy of the Final Middle Stone Age Fauna from Sibudu Cave,South Africa

This study applies a taphonomic analysis to the final Middle Stone Age faunal assemblage from Sibudu Cave, South Africa, by assessing bone surface modifications, breakage patterns and skeletal element abundances. Cut marks, percussion marks, severe fragmentation and the high frequency of burned bone combine to demonstrate that human behaviour was the principal agent in the assemblage's formation. These results are consistent with previous research on earlier occupations of Sibudu during the Middle Stone Age. Moreover, this assemblage is proposed to reflect regular site maintenance and cleaning. This conclusion is consistent with previous research that demonstrates systematic site maintenance during the Middle Stone Age at Sibudu and emphasises this behaviour as being a consistent activity for Middle Stone Age foragers. Copyright © 2013 John Wiley & Sons, Ltd.     

Edge damage distribution at the assemblage level on Middle Stone Age lithics: an image-based GIS approach

Lithic artifacts represent the most abundant cultural remains from Middle Stone Age sites in southern Africa. Of these, pointed forms (under a variety of names), blades, and flakes have long been recognized as the three most abundant general types, and retouch on all three is rare relative to similar forms of equivalent age elsewhere. Here we offer a new technique for documenting concentrations of edge damage on an assemblage level to infer taphonomic processes and to record usewear and retouch. This approach is specifically aimed at patterning on the assemblage scale, rather than on individual artifacts. We use points from a Middle Stone Age assemblage from Pinnacle Point Cave 13B, near Mossel Bay, South Africa, to illustrate the technique. Combining GIS, rose diagrams, and polar statistics, we were able to visually and statistically summarize lithic artifacts for patterns of edge damage. For the points made on quartzite in this assemblage, edge damage was found to be significantly patterned and taphonomic causes of the damage were rejected. The technique also opens avenues for many other quantitative analyses that are either impossible or difficult with current non-visual systems of recording, such as measurements of distance, angle, and area of edge damage.     

Identifying regional variability in Middle Stone Age bone technology: The case of Sibudu Cave

A few pieces of worked bone were previously reported from Sibudu, a site from KwaZulu-Natal in South Africa featuring a stratigraphic sequence with pre-Still Bay, Still Bay, Howiesons Poort, post-Howiesons Poort, late and final MSA cultural horizons. Here we describe an expanded collection of worked bones, including twenty-three pieces. Technological and use-wear analysis of these objects, and their comparison with experimental and ethnographic data, reveals that a number of specialised bone tool types (wedges, pièces esquillées, pressure flakers, smoothers, sequentially notched pieces), previously known only from the Upper Palaeolithic and more recent periods, were manufactured and used at least 30,000 years earlier at Sibudu Cave. These tools appear to be part of a local tradition because they are absent at contemporaneous or more recent southern African sites. Variability in Middle Stone Age material culture supports a scenario in which, beyond broad similarities in lithic technology, significant differences between regions, and trends of continuity at a local scale emerge in other aspects of the technical system, and in the symbolic domain. The archaeological record is revealing a complexity that prevents evaluation of the modern character of Middle Stone Age cultures in antinomic terms. We argue here that it is the detailed analysis of cultural variation that will inform us of the non-linear processes at work during this period, and contribute in the long run to explaining how and when crucial cultural innovations became established in human history.     

Changing patterns of carnivore modification in a landscape bone assemblage, Amboseli Park, Kenya

This study compares the landscape-scale taphonomic signal of carnivore modification to the surficial bone assemblage in Amboseli Park, Kenya as it was in 1975 and 2002–2004. Change in predator abundances over time provides a means of assessing the taphonomic signal of carnivore-mediated bone consumption and destruction under differing ecological conditions and varying levels of conspecific competition for resources. The landscape assemblage indicates taxonomic variation in the patterning of carnivore modification to ungulates of different size classes as well as within equivalent size classes. Analyses of long bone elements indicate that the differential destruction of limb ends and the strength of the correlation between limb end abundance and bone mineral density provide an indication of the intensity of carnivore modification to a faunal assemblage. The ability to infer levels of carnivore modification based on limb elements can provide faunal analysts with the tools to determine whether the taphonomic signals in the fossil record relate to carnivore modification, hominin transport of appendicular elements, or both.     

Taphonomy and zooarchaeology of a high-altitude Upper Pleistocene faunal sequence from Hovk-1 Cave,Armenia

The Caucasus is a key region for the study of hominid evolution and Neanderthal ecology. Taphonomic and zooarchaeological studies of sites from this region are few and only focused on sites at low-to-mid altitude zones with evidence of relatively intensive hominid occupation. This study focused on the taphonomic and zooarchaeological characteristics of a high-altitude site from the Upper Pleistocene – Hovk-1 Cave – looking at diachronic change in both natural and cultural processes which shaped the faunal assemblage. Results best fit a model in which the bones of most large mammals, mainly ungulates (wild goat, Capra aegagrus and red deer, Cervus elaphus) and cave bears (Ursus spelaeus) accumulated naturally through pitfalls, with minimal input from human or carnivore activity. This accumulation is characterized by a high frequency of complete ungulate and carnivore bones, a bear assemblage which is dominated by young-adults and a wild goat assemblage that includes juvenile and young-adult individuals. Our taphonomic reconstruction serves as a point of reference for comparative studies of palaeoenvironments and human subsistence patterns of Middle and Upper Palaeolithic sites in the Caucasus and broadens our perspective on hominid occupation and ecological adaptation in other high-altitude world regions.