Are there differences in social capital related to corporate regional engagement in dynamic and less dynamic non-core regions?

ABSTRACT

This article explores corporate regional engagement and related social capital in non-core regions. Corporate regional engagement comprises various activities of firms to influence regional contexts, which are challenging in non-core regions (e.g. on account of their organizational or institutional thinness). Corporate regional engagement engenders positive effects for regional development when firms collaborate among themselves (bonding social capital) and with other actors (bridging social capital) to improve regional endowments. We assume that dynamic regions have at their disposal higher levels of inclusive social capital in terms of collaboration networks for regional concerns and trust, while less dynamic regions have more exclusive and fragmented social capital. Consequently, less dynamic regions in particular appear to have potential to develop in a more social sense by activating the endogenous potential of region-wide collaboration. Those assumptions are tested based on a survey with Chief Executive Officers from the manufacturing industry from three dynamic and three less dynamic Swiss regions. The findings show that in dynamic regions, more firms are members of regional cross-industry associations, favouring regional collaboration; in less dynamic regions, meanwhile, more firms are members of industry-specific associations and service clubs, where benefits seem to be higher for individual firms than for the regional business environment.     

Unfolding the relationship between resilient firms and the region

ABSTRACT

This research explores organizational resilience in four manufacturing firms in four different regions of Norway. While regional resilience has gained attention in research, there have been few studies with a micro-level focus, investigating firms and their distinctive features of resilience. We chose a qualitative multiple-case study approach and employed a critical incident technique to study resilience in selected firms that had experienced external shocks and shifts in regard to changing markets, globalization and advances in technology. Each, however, had managed to continually develop resilience capacity over time. Our framework considered three dimensions of organizational resilience: the cognitive, the behavioural and the contextual. We address how resilience is sustained over time, the evolutionary nature of organizational resilience in firms and how resilient firms relate to the region. We found that all three dimensions of resilience capacity were evident in each firm, but appeared as a complex and unique blend. Furthermore, each dimension was supported by regional ties and affiliations. The findings suggest that organizational resilience is a dynamic capability conditioned by firm–region interactions, which are cultural, social and economic. Regional resilience is built through the contribution of the firm to the economic and social systems of the region.     

Innovations, Competitiveness and Local Embeddedness: A Study of Machinery Producers in Sweden

This paper is about technological relations and firm performance in the Swedish machinery industry. Taking its point of departure in the proliferating literature on the localized nature of learning and innovation processes, the paper sets out to answer three empirical questions: To what extent are firms integrated in localized production systems based on buyer-supplier relations? At what geographical level–local/regional, national or international–are the most important technological relations found? Is there a correlation between localized technological relations and the technological performance of firms? The results indicate that few firms display localized buyer-supplier relations. Rather, the industry is highly internationalized, with the most important customers and competitors located outside Sweden. In terms of technologically important relations, the domestic arena seems to be more important. The majority of the most important technological relations link the machinery producers to other actors in Sweden. Three out of four firms may be classified as predominantly local/regional or national in their technological relations, or technology profile. This survey therefore supports the notion that there exists both local/regional and national innovation systems. Finally, however, despite the fact that most firms are fairly locally embedded in their technology relations, there is no evidence that such embeddedness shows up as superior firm performance, in terms of technology level or innovative capacity.     

Regional Innovation Systems and Economic Performance: Between Regions and Nations

This article aims at assessing the diversity of regional innovation systems and their economic performance in Europe. We propose to adapt the social systems of innovation and production (SSIP) framework at the regional level by identifying the specific arrangements of each part of the innovation and production system. Three key features of European regions are investigated using this framework: the diversity of regional SSIP, the interplay of regional and national determinants of such systems, and the impact of SSIP on regional performance. We identify a typology of regional configurations resulting from the combination of scientific, technological, educational and industrial indicators, using multivariate data analysis. A variance analysis approach is then developed in order to test the existence of specific regional growth regimes. The results highlight a persistently high level of diversity of regional configurations, notably among knowledge intensive regions, but also show that national institutional settings remain of fundamental importance in shaping a number of regional configurations. A final conclusion relates to the weak correlation observed between the structural characteristics of regions and their performance over the 2003–2007 period: regional performance remains primarily shaped by national trends. Overall, the paper questions the regional dimension of these “systems”.     

The networks producing television programmes in the Cologne media cluster: new firm foundation,flexible specialization and efficient decision‐making structures

Based on the example of the production network of television (TV) programmes in Cologne's media cluster, this article will examine two aspects in order to obtain a deeper understanding of how localized production networks arise and how they function. First of all, the role of the founding of new firms within a localized production network will be analysed in detail. As a second step, the decision structures within the production network will be discussed. In this context the question arises as to how the parts of a particular production chain are linked together and how a smooth production flow can be guaranteed. The theoretical findings will be verified by an empirical study of the networks producing TV programmes in Cologne.     

Firm Performance,Innovation Modes and Territorial Embeddedness

This paper seeks to identify different innovation modes and their territorial embeddedness, relating them to firms’ innovative and economic performance. We also analyse the relationship between the different innovation modes and the economic impact of the crisis on firms’ performance. These relationships are tested by regression and latent class models for the Portuguese population of firms, using a sample of 397 firms classified according to technological intensity, size and region. Our results show three different innovation modes: a DUI (Doing, Using and Interacting) mode, an STI (Science, Technology and Innovation) mode and a TEI (Territorial Embeddedness Innovation) mode in which territory plays a key role. These innovative modes are related in different ways to firms’ economic and innovative performance and also have marked distinctions in terms of resilience to the economic crisis. These findings lead to a reflection on regional innovation policy in the European context.     

Structural Assessment of Companhia Aurífícia,a 19th Century Industrial Building Located in Northern Portugal

Companhia Aurifícia is located in Porto, Portugal, and was founded in 1864. It was a pioneer factory in the industrial production, casting, rolling, and stamping of metallic objects and laboured for about 150 years, in areas as jewelry, manufacture of parts in silver and gold or the production, and casting of various metals. In 1866, it began laboring in Rua dos Bragas, its present location, and in 2003 ceased all activities.Companhia Aurifícia is an industrial complex including several buildings, all located in the same block. It is a precious example of the industrial architecture in Porto, where the still existent retaining walls, structures, machinery, and decorative elements make it one of the last examples of 19^th century industrial life of the city.This article aims to evaluate the safety condition of one of the buildings included in this industrial complex, in order to propose the necessary strengthening interventions.     

Hypermobility and the governance of global production networks: The case of the Canadian cycle industry and its links with China and Taiwan

Western firms engaged in mass retailing and in product assembly make frequent changes to their global production networks (GPNs). Indeed, some GPNs show a tendency to hypermobility, which we define as a rapid switching of economic links among manufacturers, importers, and retailers. This theme is explored in the context of the Canadian bicycle industry where domestic production collapsed between 1980 and 2008, following a century of remarkable stability. After a period of flux when Taiwan was the key player, China has emerged as the dominant original equipment manufacturer (OEM) of bicycles sold in Canada, with big‐box stores accounting for the great majority of sales. We connect this increasing fluidity in supply arrangements and in the global organization of the industry with the governance of these GPNs. Several aspects of governance are considered, including the Sloanist practices of the largest Canadian retailers, and the activist role of the Chinese state in directing regional patterns of manufacturing in China.     

Knowledge Production,Urban Locations and the Importance of Local Networks

This paper analyses the relationship between knowledge production and urban locations in industrial design, a knowledge-intensive business service (KIBS). KIBS concentrate in urban locations. This is often explained by the co-location of client firms and market access in large cities. Recent research on knowledge production, however, reveals that knowledge productive networks are significant for both the competitiveness and location of KIBS. Thus, to understand the urban location of industrial design, it is important to analyse how knowledge production is organized within the industry. Industrial design is concentrated in urban locations, but most of its clients are located elsewhere. Hence, it seems that industrial design firms concentrate in urban locations mainly because their knowledge networks include specific types of formal and informal local social networks.     

Hotelling Games with Three,Four, and More Players*

Abstract. This paper extends the interval Hotelling model with quadratic transport costs to the n‐player case. For a large set of locations including potential equilibrium configurations, we show for n > 2 that firms neither maximize differentiation—as in the duopoly model—nor minimize differentiation—as in the multi‐firm game with linear transport cost. Subgame perfect equilibria for games with up to nine players are characterized by a U‐shaped price structure and interior corner firm locations. Results are driven by an asymmetry between firms. Interior firms are weaker competitors than their rivals at the corners. Increasing the number of firms shifts even more power to the corner firms. As a result, there is too much differentiation from the social perspective if n ≤ 3, while adding firms leads to a level of differentiation in equilibrium below the social optimum.     

Canada's Ocean Supercluster initiative: A national policy in regional clothing?

Since the late 1980s, there has been no explicit regional policy in Canada. Indirectly, though, equalization payments, industrial policies, as well as regional agencies encouraging the adoption of federal industrial and innovation policies, impact regional economies. In 2017, the federal government appeared to alter its approach: the Supercluster initiative was announced, drawing upon the idea that localized networks of interrelated firms can generate innovation and local development. In this paper, we discuss the mechanisms through which spatially focused industrial innovation policy can lead to regional development. We then focus on Canada's Ocean Supercluster initiative. The question we address is as follows: to what extent can this initiative (and, more widely, Canada's Supercluster policy) be understood as a regional development strategy driven by a coherent rationale for regional intervention? Apart from the fact that each Supercluster focuses on a pre-existing core of firms located within a region, there is little evidence that the Supercluster initiative has regional development objectives or impacts.     

PREFERENCE HETEROGENEITY AND ECONOMIC GEOGRAPHY*

ABSTRACT We investigate the effect of preference heterogeneity between skilled and unskilled workers on agglomeration, and we identify a new source of dependence of equilibrium prices on the demand properties shaped by the inter‐regional distribution of workers. We find a new preference effect, and we show that when the intensity of skilled workers' preference for the modern good and its variety is strong enough, prices charged by firms may even increase when the mass of local firms increases, therefore acting as a new dispersion force when trade costs are low or as a new agglomeration force when trade costs are high.     

Ophiolites Associated with Pottery Production in Bronze Age Crete

This study investigates diversity among ophiolite‐bearing sediments that were exploited for pottery production in Bronze Age Crete (c.3000–1200 bc ). The focus is on loose and consolidated formations of Upper Tertiary to Quaternary ages that contain some detrital products of Mesozoic ophiolitic source rocks. A literature review, geological fieldwork, sediment sampling and petrographic analysis are combined to identify the origin, the geographical distribution and the stratigraphic position of these ophiolitic sediments, and to assess regional diversity in their mineralogy and texture. The results provide insights into current archaeological problems regarding the provenance and production of ophiolite‐bearing pottery in Bronze Age Crete.     

Modeling Regional Economic Resilience to Disasters: A Computable General Equilibrium Analysis of Water Service Disruptions*

Abstract. Recent natural and manmade disasters have had significant regional economic impacts. These effects have been muted, however, by the resilience of individual businesses and of regional markets, which refers to the inherent ability and adaptive responses that enable firms and regions to avoid potential losses. Computable general equilibrium (CGE) analysis is a promising approach to disaster impact analysis because it is able to model the behavioral response to input shortages and changing market conditions. However, without further refinement, CGE models, as well as nearly all other economic models, reflect only “business‐as‐usual” conditions, when they are based on historical data. This paper advances the CGE analysis of major supply disruptions of critical inputs by: specifying operational definitions of individual business and regional macroeconomic resilience, linking production function parameters to various types of producer adaptations in emergencies, developing algorithms for recalibrating production functions to empirical or simulation data, and decomposing partial and general equilibrium responses. We illustrate some of these contributions in a case study of the sectoral and regional economic impacts of a disruption to the Portland Metropolitan Water System in the aftermath of a major earthquake.     

SOVIET POPULATION CHANGE AND CITY GROWTH 1970-79: A PRELIMINARY REPORT

The total, urban and rural population of major civil divisions of the Soviet Union and the population of cities over 100,000 are analyzed and mapped on the basis of preliminary results of the 1979 census. Total population growth rates declined during the 1970–79 intercensal period compared with the 1959–70 period while urbanization continued apace, although unevenly on a regional basis. The Slavic and other western republics, which show the highest urbanization levels of 60 percent and more, were also characterized by the lowest overall growth rates of 6 to 8 percent. Rural population declined almost everywhere outside a southwestern belt of high growth extending from parts of the southern Ukraine through Transcaucasia to Central Asia. Among large cities, moderate growth continues among cities with a multifunctional economy; high rates are evident in cities with major current industrial projects (automotive, for example) and in oil production regions; low rates are typical of some coal-mining and steelmaking centers. (For another report on the 1979 census, see “News Notes,” Soviet Geography, September 1979.)     

The failure of the Scandinavian defence union, 1948–1949

Knut Kjeldstadli: Jerntid. Fabrikksystem og arbeidere ved Christiania Spigerverk og Kvtemer Brug fra om lag 1880 til 1940. (Iron Age. Manufacturing system and laborers at Christiania iron works and the Kvaxrner factory from 1880 to 1940.) Pax forlag Oslo 1989. ISBN 82–530–1451–1. 594 pp., NKr. 198.     

The Effects of Exogenous Shocks on the Development of Regional Innovation Systems

Drawing on previous studies related to the evolutionary aspects of regional innovation systems (RIS), this paper examines how an exogenous shock reduced organizational thinness, fragmentation and lock-in and thereby facilitated path creation and RIS emergence in a peripheral region. A longitudinal case study approach, based on primary data from 39 interviews conducted between 2008 and 2012, is used to investigate how a region was affected by the sudden entry and subsequent activity of a multinational oil company. A multi-level analysis illustrates how this exogenous shock facilitated change at the firm, public authority and macro (regional) levels and thus provides a holistic understanding of the complex mechanisms that underlie regional transformation. The analysis illustrates how the entry of the oil company reduced organizational thinness by stimulating the establishment of external firms. The existing regional actors then managed to reduce their organizational lock-in by adapting their skills and resource bases to new knowledge provided through interfirm relationships (reduced fragmentation), and this reduced organizational lock-in and fragmentation ultimately strengthened the industrial structure and further contributed to regional path creation. A number of innovations were observed, and in combination with the “thickened” institutional structure, this represented the means for an emerging RIS.     

ARCHAEOMETRIC ANALYSES ON ‘CORINTHIAN B’ TRANSPORT AMPHORAE FOUND AT GELA (SICILY,ITALY)*

The aim of this work is to throw light on the archaic production of ‘Corinthian B’ amphorae, which are widely diffused in the Western Mediterranean basin and are also present in Greece, but whose geographical provenance is still under discussion. We analysed a group of 37 samples belonging to different ceramic classes dated to the sixth and fifth centuries bc . In particular, there were 19 sherds of trade amphorae of the so‐called archaic ‘Corinthian B’ type, from archaeological excavations in Gela (Sicily, Italy). As a comparison, we also investigated 18 samples of tiles and local coarse pottery from Sibari (Calabria, Italy). The samples were analysed using different techniques, such as optical analysis with a polarized‐light microscope (OM), X‐ray diffraction (XRD), Fourier transform–infrared absorption (FT–IR) and inductively coupled plasma–optical emission spectroscopy (ICP–OES). The combination of these complementary analytical methods allowed us to characterize the samples, determine their firing temperatures and identify the probable provenance. The study of thin sections of sherds by OM allowed us to divide the investigated amphorae into two main groups: the first was characterized by a composition that suggested a Western provenance, in particular from the Calabrian–Peloritan region; the second one was very similar to the ‘Corinthian B’ amphorae that come from Corinth and have been classified as ‘fabric class 1’ by Whitbread (1995 ). The XRD and FT–IR results permitted us to determine the mineral composition of the findings and to estimate their firing temperature. The ICP–OES technique was particularly useful in identifying the production centres. In fact, in the studied pottery, this analysis revealed Ni and Cr values that were noticeably different between Greek and southern Italian production.     

STONES FROM MEDIEVAL GLASSMAKING: A SUITABLE WASTE PRODUCT FOR RECONSTRUCTING AN EARLY STAGE OF THE MELTING PROCESS IN THE MT LECCO GLASS FACTORY*

The Mt Lecco glass factory was one of the most important production centres in Liguria (Italy) during the 14th and 15th centuries. Archaeological evidence indicates that the whole production cycle took place here. During the glassworking process, production defects such as ‘stones’ were identified and discarded. Stones are partially melted, glass‐coated relics of raw materials or fragments of crucible. The study of the microtexture of stones together with microprobe analyses of phases provides a key for understanding the glassmaking procedure carried out in the Mt Lecco glass factory. The melting rate can be inferred from the compositional variability of glass, which suggests fractional melting of the batch. Glass composition indicates that the Mt Lecco production was a mixed‐alkali one, probably made of quartz‐bearing material as vitrifying agents, plant ashes as fluxing agents and dolomitic limestones as stabilizing agents.     

Regional Advantage of Cluster Development: A Case Study of the San Diego Biotechnology Cluster

The concept of “clusters” has become central to regional economic development strategies, especially in the high-technology and biotechnology industries. Numerous studies have examined the significance of industrial clusters and their components, but comparatively less attention has been directed towards understanding the roots and processes of industrial localization. In particular, emerging biotechnology clusters such as that in San Diego have not drawn adequate scholarly attention given their policy implications with regard to clustering and regional development. Based on in-depth interviews, historical archives and participatory observations, this paper examines how the San Diego biotechnology cluster emerged and grew into an entrepreneurial habitat that has nurtured hundreds of biotechnology companies that have produced a series of innovative products. The author suggests that the regional context of the existence of a number of small biotechnology companies rather than a group of large firms, a continuous flow of talent, and leadership that fosters collaborations have been critical in promoting knowledge creation, circulation and accumulation, which are essential to spawning startups. The regional advantage of San Diego in stimulating entrepreneurship and innovation lies in its edge in creating and exploiting knowledge and practices through its entrepreneurs' robust interactions and participation in local communities of practice.