贾湖遗址出土古陶产地的初步研究

利用等离子体发射光谱 (ICP),对舞阳贾湖遗址出土古陶样品进行了常量元素和微量－痕量元素的测试分析,结合考古发掘资料和考古学分析,采用聚类分析方法,系统研究了贾湖遗址出土古陶的矿料来源,发现贾湖制陶业基本处于家庭制陶阶段。本文还将贾湖遗址与大河村遗址和西山遗址的出土古陶产地进行了比较研究。结果表明,这些遗址的陶器在聚类分析谱系图上被明显地分为相应的三类,它暗示上述三处遗址间无明显文化交流关系。     

广东博罗先秦硬陶的XRF和INAA研究

为揭示广东博罗梅花墩、银岗、横岭山三地古陶器的产源、烧造工艺、技术传播和化交流等方面情况,用波长色散X射线荧光分析(WDXRF)、仪器中子活化分析(INAA)同时测量了广东博罗梅花墩、银岗、横岭山等三地点所出38片西周至春秋、战国硬陶中Al、Ba等元素的含量。并用主成分分析分别处理了测量数据。两套数据的分析结果均表明,梅花墩、银岗和横岭山的硬陶原料互不相同,各地点硬陶可能主要是“自烧自用”。数据分析还表明在南方各省区中,广东硬陶具有Al2O3含量偏高这一明显的地区特征。     

河曲坪头遗址龙山时期陶器及其制陶原料的化学成分分析

为了对山西省忻州市河曲坪头遗址出土的龙山时期的陶器以及制陶原料中的粘土原料的种类和来源进行相关探讨,利用ICP-OES对出土的陶器、坯料,以及遗址附近采集的土样进行了化学成分测试,并使用SPSS软件对分析结果进行了降维处理和主成分分析。结果显示:坪头遗址不同质地的陶器陶土原料相同,只是在钙含量方面存在细微差异。制作陶器所用的粘土原料很可能取自附近的红色古土壤层。该遗址是古人在当地制作陶器的一个场所。     

CYPRIOT BYZANTINE GLAZED POTTERY: A STUDY OF THE PAPHOS WORKSHOPS

Twenty‐five samples of Byzantine glazed pottery from two archaeological sites between Limassol and Paphos region (Cyprus), dated between the 12th and 15th century ad were studied using micro X‐ray fluorescence spectroscopy, scanning electron microscopy and X‐ray diffraction analysis. It was found that all the glazes contain lead, following the main manufacturing process of medieval pottery in the Mediterranean territory, while some of them contain tin, possibly for better opacity. Furthermore, it is shown that copper, iron and cobalt with nickel are responsible for the decoration colours. Finally, the application of principal component analysis revealed significant differentiation for some of the samples.     

CAMPANIAN POTTERY FROM ANCIENT BRUTTIUM (SOUTHERN ITALY): SCIENTIFIC ANALYSIS OF LOCAL AND IMPORTED PRODUCTS*

One hundred and fifty-seven sherds of Campanian pottery were analysed by inductively coupled plasma optical emission spectroscopy (ICP-OES) and flame emission spectroscopy (FES). The sherds were found in the course of archaeological excavations carried out at the sites of Sibari, Cosenza, Crotone, Locri, Reggio and Oppido Mamertina in southern Italy (ancient Bruttium, today Calabria). Analyses were carried out on dissolved samples, determining 15 elements per sample (Al, Fe, Ca, Mg, Ti, Mn, Sr, Ba, Cr, Cu, Y, La and Sc by ICP-OES, and Na and K by FES). Analytical data were subject to multivariate statistical treatment by hierarchical cluster analysis and principal components analysis. Results indicated different compositional groups, allowing one to separate suspected imports from Campania, Etruria and Sicily from each other and from likely local products. The latter could be further classified into different groups, comprising imitations of foreign forms as well as original local products.     

Chemical characterization of majolica from 14th–18th century production centers on the Iberian Peninsula: a preliminary neutron activation study

Majolica pottery is one of the most characteristic tableware produced during the Medieval and Renaissance periods. Majolica technology was introduced to the Iberian Peninsula by Islamic artisans during Medieval times, and its production and popularity rapidly spread throughout Spain and eventually to other locations in Europe and the Americas. The prestige and importance of Spanish majolica was very high. Consequently, this ware was imported profusely to the Americas during the Spanish Colonial period. Nowadays, Majolica pottery serves as an important horizon marker at Spanish colonial sites. A preliminary study of Spanish-produced majolica was conducted on a set of 246 samples from the 12 primary majolica production centers on the Iberian Peninsula. The samples were analyzed by neutron activation analysis (NAA), and the resulting data were interpreted using an array of multivariate statistical procedures. Our results show a clear discrimination between different production centers. In some cases, our data allow one to distinguish amongst shards coming from the same production location suggesting different workshops or group of workshops were responsible for production of this pre-industrial pottery.     

Characterization of Iron age pottery from eastern Turkey by laser- induced breakdown spectroscopy (LIBS)

Selected pottery sherds coming from the Ayanis, Dilkaya and Karagündüz excavations in eastern Turkey and dated from the Early to Middle Iron Age were examined as regards their composition by using laser-induced breakdown spectroscopy (LIBS). The objective of the study was first to investigate the potential of the LIBS technique in the compositional analysis of pottery and further to explore correlations in spectral data, by using chemometrics methods that would possibly enable discrimination among different sherds. This work is part of a broader study aiming to examine clay variability both before and during the Urartian State period and to explore possible relationships and differences among pottery objects from fortresses and settlements or settlements and cemeteries on the basis of the clay composition of sherds. Preliminary results demonstrate that by using the LIBS technique it is possible to analyse pottery sherds in qualitative and semi-quantitative ways, providing information on the clay and slip composition. Furthermore, encouraging results have been obtained by carrying out principal component analysis (PCA) on the LIBS spectra, which suggest that in certain cases, it is possible to directly correlate spectral information with the origin of pottery sherds.     

ROMAN POTTERY FROM AUGUSTA PRAETORIA (AOSTA,ITALY): A PROVENANCE STUDY

Forty-five sherds of Roman pottery, 21 terrae sigillutae and 24 common wares excavated in Augusta Praeroria, were analysed for 12 elements by atomic absorption and emission spectroscopy. Hierarchical agglomerative cluster analysis, principal component analysis, and non-linear mapping were performed on the analytical data in order to classify the objects in groups which could account for different provenances; soft independent modelling of class analogy (SIMCA) and K nearest neighbours (KNN) were used for solving doubtful assignments. The classification results indicate that local productions of terra sigillatu can be easily distinguished from the imported ones, and that common wares have compositional patterns which differ from those of both local and imported terrae sigillatue.     

CHEMICAL CHARACTERIZATION OF TIN‐LEAD GLAZED POTTERY FROM THE IBERIAN PENINSULA AND THE CANARY ISLANDS: INITIAL STEPS TOWARD A BETTER UNDERSTANDING OF SPANISH COLONIAL POTTERY IN THE AMERICAS*

Majolica pottery was the most characteristic tableware produced in Europe during the Medieval and Renaissance periods. Because of the prestige and importance attributed to this ware, Spanish majolica was imported in vast quantities into the Americas during the Spanish Colonial period. A study of Spanish majolica was conducted on a set of 186 samples from the 10 primary majolica production centres on the Iberian Peninsula and 22 sherds from two early colonial archaeological sites on the Canary Islands. The samples were analysed by neutron activation analysis (NAA), and the resulting data were interpreted using an array of multivariate statistical approaches. Our results show a clear discrimination between different production centres, allowing a reliable provenance attribution of the sherds from the Canary Islands.     

Mycenaean pottery from the Argolid and Achaia—a mineralogical approach where chemistry leaves unanswered questions

The chemical classification of Mycenaean pottery from the Northern Peloponnese by neutron activation analysis (NAA) resulted in two groups with very similar chemical compositions assigned to production centres in the Argolid and in Achaia, respectively. The statistical separation of these two groups on the basis only of their chemical composition was difficult, and not clear‐cut for all of the examined samples. A complementary mineralogical examination by X‐ray diffraction (XRD) of some selected samples indicated differences in the mineralogical composition, which confirmed the determined chemical differences. Furthermore, a clay sample was examined, which showed a composition similar to that of the pottery.     

Differentiation of ceramic chemical element composition and vessel morphology at a pottery production center in Roman Galilee

Cooking pots and bowls from two production locations ca. 200 m from each other at the rural settlement of Kefar Hananya in Roman Galilee were compared employing chemical element composition and vessel-shape analyses. Splits of each pulverized sample, all of which were taken from ceramic wasters, were analyzed by both instrumental neutron activation and high-precision X-ray fluorescence analyses, and computerized vessel-shape analysis was employed for morphological analysis of the same vessel forms from each location. Several statistical techniques (bivariate plots, principal component analysis, cluster analysis and discriminant analysis) were used for analyzing the resultant data. It was found that both the cooking pots and bowls made at each location could be distinguished by employing either chemical composition or morphological analysis. The implications of this work, with regard to investigating both production and consumption sites, and for pottery provenance studies, are discussed. The findings suggest that these analytical techniques can be useful as an aid for chronological differentiations of archaeological pottery.     

The Hellenistic and Roman Syracuse (Sicily) Fine Pottery Production Explored by Chemical and Petrographic Analysis

The chemical composition and petrographic features of 51 samples of fine pottery selected from the archaeological site of Syracuse have been established by means of optical microscopy and X‐ray fluorescence spectrometry, with the aim of creating a reference group for the ceramics produced in this important Greek colony during the Hellenistic–Roman period. This reference group is constrained by the analysis of six kiln wasters and of raw materials outcropping in the studied area. Among the studied findings, the main part is assignable imputably to local production, while some specimens probably come from Greece and other colonies (Messina and Gela). The Syracuse fine pottery is characterized by inclusions formed mainly by quartz and micaceous and fossiliferous groundmass. The used pastes were more or less purified through the removal of the sandy‐to‐coarse silty granulometric fraction. The multivariate statistical analysis of chemical data permits the identification of production at Syracuse on the basis of comparison with the kiln wasters and the Plio‐Pleistocene clays.     

A case for lead-glaze experimentation by late eighteenth-century Catawba using portable X-ray Fluorescence (pXRF)

ABSTRACT

Recent research has demonstrated that Catawba ceramic practices changed abruptly and dramatically after 1759 following a devastating smallpox epidemic and subsequent community relocation. Pottery from the historically documented Catawba town of Old Town and others indicate potters adopted new techniques and styles as they adjusted to new economic and social conditions, including copying European vessel forms, experimenting with new ceramic paste recipes, and utilizing new decorative motifs. The identification of four lead-glazed sherds on otherwise Catawba-looking pale-bodied paste raises the possibility that Catawba potters may have also experimented with lead glazing. This paper presents the results of an elemental analysis of nearly 70 ceramic samples using pXRF and multivariate statistical techniques to identify patterns of production within pale-bodied colonowares. The results indicate that the glazed pottery fragments were made with elementally similar clay used by Catawbas in the Twelvemile Creek locality. I argue that in addition to modifying nearly every aspect of their ceramic repertoire, at least one Catawba potter experimented with lead glazing, providing further insights into the emergent Catawba pottery trade.     

The Effect of Accelerated Alteration on the Discrimination between Baltic and Romanian Amber

Ten geological samples (five from each source—Romanian amber and Baltic amber) in duplicate for five different media (air, water, saline, acid and basic) were subjected to thermal alteration at 80 ± 2°C for 12 weeks, in the dark. The samples were analysed before and after the accelerated alteration experiment by Fourier transform infrared spectroscopy, both in transmittance and reflectance mode, and the acquired spectra were statistically processed by multivariate data analysis, mainly using principal component analysis. The results of the experiment are useful in giving a better picture of how to discriminate between archaeological amber artefacts.     

ARCHAEOMETRIC ANALYSES ON ‘CORINTHIAN B’ TRANSPORT AMPHORAE FOUND AT GELA (SICILY,ITALY)*

The aim of this work is to throw light on the archaic production of ‘Corinthian B’ amphorae, which are widely diffused in the Western Mediterranean basin and are also present in Greece, but whose geographical provenance is still under discussion. We analysed a group of 37 samples belonging to different ceramic classes dated to the sixth and fifth centuries bc . In particular, there were 19 sherds of trade amphorae of the so‐called archaic ‘Corinthian B’ type, from archaeological excavations in Gela (Sicily, Italy). As a comparison, we also investigated 18 samples of tiles and local coarse pottery from Sibari (Calabria, Italy). The samples were analysed using different techniques, such as optical analysis with a polarized‐light microscope (OM), X‐ray diffraction (XRD), Fourier transform–infrared absorption (FT–IR) and inductively coupled plasma–optical emission spectroscopy (ICP–OES). The combination of these complementary analytical methods allowed us to characterize the samples, determine their firing temperatures and identify the probable provenance. The study of thin sections of sherds by OM allowed us to divide the investigated amphorae into two main groups: the first was characterized by a composition that suggested a Western provenance, in particular from the Calabrian–Peloritan region; the second one was very similar to the ‘Corinthian B’ amphorae that come from Corinth and have been classified as ‘fabric class 1’ by Whitbread (1995 ). The XRD and FT–IR results permitted us to determine the mineral composition of the findings and to estimate their firing temperature. The ICP–OES technique was particularly useful in identifying the production centres. In fact, in the studied pottery, this analysis revealed Ni and Cr values that were noticeably different between Greek and southern Italian production.     

Physical study of the Cucuteni pottery technology

Most of our knowledge concerning the Cucuteni pottery is based on traditional archaeological methods (typology, style and context analysis) and only a few interdisciplinary studies have been published. As there is a strong interest in revealing the basic pottery technology used by the Cucuteni communities we have investigated a significant number of pottery samples from 22 archaeological sites located in Eastern Romania by several physical analysis techniques: X-ray diffraction (XRD) and by magnetic measurements, including a first-order reversal curve (FORC) diagram study on the samples showing a hysteretic behavior. The main results presented in this study are discussed and compared with actual knowledge on the ancient Cucuteni pottery.     

Provenance study of early and middle bronze age pottery from Kaman-Kalehöyük,Turkey, by heavy mineral analysis and geochemical analysis of individual hornblende grains

The provenance of Early Bronze Age and early Middle Bronze Age pottery produced between 2100 and 1970 B.C. and excavated from Kaman-Kalehöyük, Turkey was studied using mineralogical methods, including heavy mineral analysis and geochemical study of individual hornblende grains. The relative abundances of heavy minerals in the fabrics of 20 Early Bronze Age (EBA) and early Middle Bronze Age (MBA) pottery sherds, together with 27 local sediments collected within a radius of 25 km of the site were studied. The heavy mineral distributions in the Kaman region were statistically analyzed for consistencies in their occurrence. Amphibole was found to be the most abundant heavy mineral in most of the analyzed samples, followed by titanite and epidote. The amounts of other minerals such as garnet, clinopyroxene, and zircon are subordinate. Different proportions of heavy minerals in the fabrics allow categorization of the EBA and early MBA potteries into 5 groups. Comparative study of heavy mineral assemblages of local sediments and pottery suggests that half of the EBA and most of the MBA potteries were produced from sediment near the excavation site, whereas the other half of the EBA potteries were produced from sediment occurring at 25 km east or more east of the site. The geochemistry of individual amphibole grains was studied by electron-microprobe analysis. Most of the studied amphibole grains are calcic and aluminous, corresponding to hornblende. They can be further characterized into four types based on their chemical composition. The combination of heavy mineral identity and hornblende geochemistry provides diagnostic evidence for the origins of Kaman-Kalehöyük pottery. These and analogous heavy mineral techniques are effective archaeometric tools for determining pottery provenance.     

MODIFIED MAHALANOBIS FILTERS FOR GROUPING POTTERY BY CHEMICAL COMPOSITION*

A statistical procedure for grouping pottery in provenance studies by chemical data is presented, which now is routinely in use in our laboratory. It is based on the Mahalanobis filter method and X² -statistics, and can be used for both establishing groups and assigning single sherds to already known groups, thus replacing principal components analysis or cluster analysis and avoiding their problems in grouping pottery. The new method is able to consider correlations, uncertainties of measurement and constant shifts of the data in case of dilution. In particular, considering dilution effects results in both a better assignment to and separation of reference groups and is also equivalent to the compositional data approach, if log-transformed data are used. Other distortions of data (e.g., mixing of clays) can also be considered.     

CHEMICAL–MINERALOGICAL ANALYSES AND MICROSTRUCTURAL STUDIES OF PREHISTORIC POTTERY FROM RAHMATABAD,SOUTH‐WEST IRAN*

A series of prehistoric pottery samples excavated from Rahmatabad, south‐west Iran, were investigated using XRF and XRD analyses to determine their chemical and mineralogical compositions. The sample microstructures were also studied by SEM/EDX. The relative similarity of compositions, the fine, dense and homogeneous microstructures and the presence of high‐temperature phases such as diopside and mullite showed the use of high firing temperatures, in the range 950–1050°C. This, along with the homogeneity in shape, decoration and size ranges of the ware, all indicate the adoption of specialized pottery‐making techniques by the potters of Rahmatabad in the fifth to fourth millennia bc .     

On the provenance and manufacture of red-slipped fine ware from ancient Cassope (NW Greece): evidence by X-ray analytical methods

Energy-dispersive X-ray fluorescence spectroscopy was used to characterize red-slipped pottery (2nd–1st century BC) from ancient Cassope, north-western Greece. The compositional data were statistically treated by principal component analysis and chemical groups were established, representing locally produced and imported items. Mineralogical investigation by X-ray diffraction indicated firing temperatures in the range from 850 to 1000 °C for most of the sherds, while one group consisted of over-fired items, possibly in excess of 1050 °C. The morphology and elemental composition of the ceramic bodies and surface slips were examined through scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. The analyses revealed that different pottery groups exhibit surface slips of different nature, in terms of thickness, degree of vitrification and elemental composition. Overall, the diversity in technological characteristics of the examined sherds is indicative of the socio-economic conditions prevailing in Cassopaea during the late Hellenistic period.