Starch grain analysis for groundstone tools from Neolithic Baiyinchanghan site: implications for their function in Northeast China

Large numbers of groundstone tools have been uncovered from archaeological sites in the Early Neolithic period in China. Traditionally they are often regarded as agricultural tools for processing cereals. In this paper we report preliminary starch grain analysis of groundstone tools from Baiyinchanghan site to gain a better understanding of use of these tools in the Northeast China. We found that starch grains on these groundstone tools are most likely from Quercus sp. The result of this study indicates that many groundstone tools for the Early Neolithic period were used to process wild and domesticated plants alike.     

Assessing the function of early hominin bone tools

Bone tools from early hominin sites in southern Africa continue to intrigue researchers interested in the development of early human technology and cognition. Sterkfontein, Swartkrans and Drimolen have all yielded bone tools dated to between 1 and 2 Mya associated with numerous Paranthropus robustus and few early Homo remains. The bone tools are described by different authors as implements used to excavate tubers from the ground and termites from their nests, work hides and strip bark from trees. The purpose of this research was to develop a more powerful analytical tool for the study and interpretation of bone surface modifications in general, and early hominin bone tool function(s) in particular. We used an optical interferometer to scan the worn areas of a sample of bone tools from Swartkrans and Drimolen, an ethnographic collection of implements used for defleshing marula fruits, and a set used experimentally to excavate in the ground and in termite mounds. The 3D rendering of archaeological and experimental wear patterns better highlights previously described differences between these patterns, and demonstrates the pertinence of this analytical tool to visually discriminating between different bone modifications. Analysis of selected 2D and 3D roughness variables indicates that the wear pattern on the early hominin bone tools from Drimolen is significantly different from that of tuber digging, very similar to termite foraging, and not unlike marula fruit processing. Marked differences are detected between the Swartkrans and Drimolen wear patterns, which suggests that the tools from these sites may have been used with different motions, in contact with abrasive particles of different size, or in different tasks. Principal component analyses conducted on 2D and 3D variables suggest that early hominin bone tools from southern Africa may have been used to forage for termites, extract tubers in a motion parallel to the tool main axis, process fruits and conduct other, as yet unidentified, tasks.     

Starch analysis reveals prehistoric plant translocations and shell tool use,Marquesas Islands,Polynesia

Starch analysis is proving particularly useful in tropical regions like the central Pacific where crop inventories are often dominated by starchy fruits and tubers and recovery of macrobotanical remains is rare. Analysis of 23 shell tools from the Marquesas Islands provides direct evidence for translocation of five traditional crop plants. Four taxa derive from the western Pacific, including Artocarpus altilis (breadfruit), Piper methysticum (kava), Colocasia esculenta (taro), and one or more species of Dioscorea (yam). The fifth taxon, the South American Ipomoea batatas (sweet potato), dates from the 14th century AD onward and constitutes the earliest record of this cultigen in the archipelago. The occurrence of sweet potato starch suggests that this crop plant may have been more important than usually is assumed, while the limited recovery of breadfruit starch, the main Marquesan food plant at western contact, requires further investigation. The starch residues also inform on tool use, demonstrating that shell tools ethnographically associated with specific crops (e.g., “breadfruit peelers”) had more generalised functions. This study is a further demonstration of the potential of starch analysis to provide important information on the history of crop introductions, on-site activities, and artefact use.     

从随葬工具的性别关联探讨中国新石器时代的性别分工

本文利用二项式分布假设检验方法对黄河流域从裴李岗到大汶口晚期和马厂期男女墓葬中随葬工具的种类和数量的变化进行了统计分析,以揭示劳动按性别分工的问题。这些墓葬的年代范围大致为公元前7000年至2000年之间,正是处于农业生产出现不久后的发展期。根据统计分析,可将随葬工具分为3类:(1)主要由男性使用的工具,(2)主要由女性使用的工具,(3)男女共同使用的工具,其中前两类可视为与性别相关的工具,并计算了每种性别关联型工具在各自遗址或墓地中所占的比例。结果表明,在这一时期中(1)社会劳动中性别分工的增强和细化(性别关联型劳动工具比例的增大和早期一些男女共用型工具晚期转化为主要系男性使用)和(2)男性在社会劳动中优势地位的完全确立(于大汶口晚期在性别关联型工具种类中,主要为男性使用的工具占绝大多数,而主要为女性使用的工具仅留下纺轮一种)。根据这一结果,简单讨论了母系氏族向父系氏族过渡的时间问题。     

An alternative approach for defining the boundaries of ‘party families’: examples from the Israeli extreme right‐wing party scene

For many years the ‘party family’ concept has been utilised by scholars for the purpose of classifying political parties across both countries and time. Like many other concepts in political science, the ‘party family’ idea is widely used, yet has suffered from a certain level of ambiguity. In this study, we try to clarify and re‐emphasise the importance of the ‘party family’ concept. We do so by offering an integrative approach for the classification of ‘party families’. This approach brings together two different theoretical schools (the ideological and the sociological approaches) for classifying ‘party families’, and also combines various methodologies (qualitative content analysis, ecological analysis and survey‐based quantitative analysis) as essential tools for defining ‘party families’. The deeply polarised party system in Israel, and especially the expanding extreme right‐wing ‘party family’ in the country, serve as our case study. The decision to focus only on one political system is meant to illustrate the importance of the ‘party family’ concept, not only for its common use as a tool in the comparative classification of parties across countries and time but also for the study of single‐party systems which are characterised by multi‐partism or polarised pluralism.     

Building an Experimental Comparative Reference Collection for Lithic Micro-Residue Analysis Based on a Multi-Analytical Approach

Residue analysis applied to stone tools is a useful aid for better understanding their past function and, by extension, reconstructing early human behaviour. However, if the nature of residues found on the lithic tools is misinterpreted, so will be our understanding of their archaeological context. As a consequence, correctly identifying residues in the domain of lithic studies is of paramount importance. With this main goal in mind, we analysed different experimental materials likely to have been involved in daily tasks in the prehistoric context (e.g. bone, wood, meat). Microscopic analyses were then carried out using two (comparable) techniques: Optical Light Microscopy and Scanning Electron Microscopy. Also, energy dispersive X-rays spectroscopy (EDX or EDS) was applied to the experimental samples to determine their elemental composition. Advantages and disadvantages of both microscopic methods and their implications for correct residue identification are discussed. The distribution of residues on lithic surfaces is also considered. This study resulted in the construction of a data-set including both photographic material and EDX spectra for each residue analysed. The main result is that, compared to OLM scanning, SEM analyses highly improves the accuracy of residue identification.     

Neanderthal Shell Tool Production: Evidence from Middle Palaeolithic Italy and Greece

The vast majority of tools recovered from Palaeolithic sites are made of stone varieties. Only rarely do non-lithic implements come to light, let alone tools produced on marine mollusc shell. Interestingly, a good number of shell implements made on Callista chione and Glycymeris sp. valves have been reported from 13 Middle Palaeolithic (Mousterian) sites in southern peninsular Europe. Of these, more than 300 specimens display evidence of deliberate edge retouch. They are all considered products of Neanderthals and date from ~110?ka BP to perhaps ~50?ka BP. In this paper, we review the evidence for Mousterian shell tool production in Italy and Greece??the only two countries in which such tools have been securely identified??and present experimental results obtained in the effort to understand the production process and typo-functional role(s) of the artefacts. We examine the general provisioning pattern of raw materials, as well as the typological, species-related and chronological data pertinent to the production of shell tools by Neanderthals. The data suggest that the Mousterian shell scrapers are a response to poor availability of lithic raw material in the areas of occurrence, and may be best described as an extension of chipped stone technologies to specific types of marine shell, their form defined by an existing mental template. As such, they constitute evidence for refined adaptation strategies and advanced provisioning of resources amongst Neanderthals, and may lend further support to the idea that these hominids displayed a degree of complex behaviour.     

Shell tool use by early members of Homo erectus in Sangiran,central Java,Indonesia: cut mark evidence

Sangiran has been known as a source of fossil Homo erectus but is better known for the absence of archaeological tools. Cut mark analysis of Pleistocene mammalian fossils documents 18 cut marks inflicted by tools of thick clamshell flakes on two bovid bones created during butchery at the Pucangan Formation in Sangiran between 1.6 and 1.5 million years ago. These cut marks document the use of the first tools in Sangiran and the oldest evidence of shell tool use in the world.     

Culinary Crafts and Foods in Southwestern Ethiopia: An Ethnoarchaeological Study of Gamo Groundstones and Pottery

Few ethnoarchaeological studies have combined the production and use of groundstones and pottery as indicators of household variation in subsistence and socioeconomics. This ethnoarchaeological study explores how the Gamo people who live in southwestern Ethiopia interact with their culinary tools of pottery and groundstones. One of the unique cultural features of the Gamo is their strict caste system, which forces artisans such as potters and groundstone makers into a full-time specialization. This paper uses a chaîne opératoire analysis regarding groundstone and pottery production and then addresses their use by drawing from household studies from three Gamo communities. The analysis discusses the role that social hierarchy can have on cooking and craft variation within households. Thus, these artisans bring to life crafts that give the Gamo tools to create their daily subsistence, and these tools and foods allow us to explore two key archaeological issues: subsistence and socioeconomic variation of people’s households.     

Digital Photogrammetry for Documentation of Maritime Heritage

Documentation of maritime heritage is essential for its protection, and for reference in restoration and renovation processes. These functions become problematic in the case of historical ships and boats that lack lines drawings. The purpose of this paper is to describe a procedure for creation of lines drawings based on the shape analysis of surviving historical boats or their small-scale models with the help of reverse engineering (RE) techniques. The paper describes how digital photogrammetry and the iterative method were used to analyze the shape of three historical boats: Tomahawk, Refola and Nada. The application of the proposed procedure produced the lines drawings of the boats as its result. The accuracy of the 3D CAD model obtained with the photogrammetric technique was verified by comparing it against a more accurate 3D model produced with the help of a RE laser scanner. The examination of the resulting lines drawings proves that the digital photogrammetry process and the proposed iterative method are adequate tools for developing lines plans of boat models. The research offers the methodological basis for the creation of an archive of lines drawings of historical boats. Such an archive would provide reference for philologically correct restorations, and permit definition and classification of distinctive elements of various types of historical boats, particularly those produced in the Campania Region.     

Can salmonids (Oncorhynchus spp.) be identified to species using vertebral morphometrics?

Remains of anadromous Pacific salmon and trout (genus Oncorhynchus) are common in archaeological sites from California to Alaska; however, morphological similarity generally precludes species identification, limiting the range of questions that salmonid remains can address in relation to past human use and ongoing efforts in conservation biology. We developed a relatively simple, rapid, and non-destructive way to classify salmon and trout vertebrae from archaeological contexts to species using length, height and the ratio of length to height. Modern reference material was obtained from all seven anadromous Oncorhynchus species native to the west coast of North America. A minimum of ten adult Chinook (Oncorhynchus tshawytscha), chum (Oncorhynchus keta), coho (Oncorhynchus kisutch), pink (Oncorhynchus gorbuscha), and sockeye salmon (Oncorhynchus nerka) and cutthroat (Oncorhynchus clarki clarki) and steelhead trout (Oncorhynchus mykiss) were skeletonized and vertebra length and height were measured. Morphometric analyses compared species classification success based on Linear Discriminant Analysis (LDA), Classification and Regression Trees (CART), and randomForest, with CART performing the best. Classification analyses used all seven species individually, but because of considerable overlap among several species we also conducted analyses on four species groupings. We assigned Chinook salmon and cutthroat to their own groups based on their dissimilarities from each other and the other species. The remaining species were divided into two group complexes (a) chum, coho, and steelhead; and (b) pink and sockeye. When we grouped species according to similar morphology, CART overall success rates increased, ranging from 92 to 100%. Individual species with the highest successful classification rates using CART were Chinook salmon and cutthroat, from 92 to 100%, respectively. We applied our classification to an assemblage of ancient (1000–3000 year old) salmonid vertebrae from the Swiftwater Rockshelters excavations on the upper Wenatchee River in Washington State, U.S.A.     

A Cost-Based Ripley’s <Emphasis Type="Italic">K</Emphasis> Function to Assess Social Strategies in Settlement Patterning

Most quantitative approaches to distributional analysis in archaeology assume a homogeneous study surface that is amenable to easy generalisations. This framework has been widely used to describe settlement processes, disregarding the spatial heterogeneity inherent to geographic reality. In other words, researchers have often assumed that the correlation between the elements of a spatial distribution is a function of the Euclidean distance (i.e. straight line distance) between them. Other archaeological studies have tested alternative measures to Euclidean distances, such as cost-based ones, both to describe optimal routes and to assess spatial autocorrelation in a point pattern. Nevertheless, until now there has been no suitable model to introduce these measures into spatial statistical equations. In order to overcome this obstacle, we approach the implementation problem inversely by embedding the spatial pattern under study into a Euclidean frame of reference based on its cost-distance pairwise matrix. This paper describes the application of this methodology on one of the main tools used by archaeologists to assess settlement patterns: Ripley’s K function. We present two case studies, covering both macroscale and mesoscale, with significant variations in the results depending on the use of the Euclidean or cost-based approach. Data, functions and results have been R-packaged for the sake of reproducibility and reusability, allowing other researchers to build upon our methods.     

Signal processing for magnetic pulsations

Many methods of analysis have been developed in order to study Pc1, Pc3–4 and Pi2. These three classifications are good examples of the great variety of signals. The review is divided into two parts. In the first part, one component signals are studied. We have to determine the number of degrees of freedom for our three magnetic variations. Discussion of the choice of spectral analysis is made in terms of the relative importance of deterministic and random data, and stationarity and time duration of the signal. In the second part, multicomponent signal processing is surveyed. Study of polarization at one point in space or comparison of signal recorded on a network of stations are illustrated. There are many interesting methods in the literature. Instead of a general solution we propose a check list to determine the best and simplest method for magnetic signals. The same classification as in Section 1 is applied this time to the relation between components.     

Early and mid Holocene tool-use and processing of taro (Colocasia esculenta), yam (Dioscorea sp.) and other plants at Kuk Swamp in the highlands of Papua New Guinea

Recent multidisciplinary investigations document an independent emergence of agriculture at Kuk Swamp in the highlands of Papua New Guinea. In this paper we report preliminary usewear analysis and details of prehistoric use of stone tools for processing starchy food and other plants at Kuk Swamp. Morphological diagnostics for starch granules are reported for two potentially significant economic species, taro (Colocasia esculenta) and yam (Dioscorea sp.), following comparisons between prehistoric and botanical reference specimens. Usewear and residue analyses of starch granules indicate that both these species were processed on the wetland margin during the early and mid Holocene. We argue that processing of taro and yam commences by at least 10,200 calibrated years before present (cal BP), although the taro and yam starch granules do not permit us to distinguish between wild or cultivated forms. From at least 6950 to 6440 cal BP the processing of taro, yam and other plants indicates that they are likely to have been integrated into cultivation practices on the wetland edge.     

Functionality and Morphology: Identifying <Emphasis Type="Italic">Si</Emphasis> Agricultural Tools from Among Hemudu Scapular Implements in Eastern China

Most Chinese archaeologists assume that the scapular implements used in the Hemudu culture in eastern China (7000–5000 BP) were the si agricultural implements (tools for breaking ground and turning soils over to assist in seeding) recorded in ancient Chinese literatures and, accordingly, assume the Hemudu culture was a farming society. However, ethnographic and historical literatures worldwide have suggested inconclusive functions for similar implements. We conducted a range of experiments under realistic conditions, including hide and plant processing and earth-working, followed by use-wear analysis, to identify the functions of the Hemudu scapular implements. The results suggest that no more than half of the implements were employed as si and that their penetrability and durability were rather limited. These findings help explain why Hemudu should not be labeled as a farming society. Through experimentation and use-wear analysis, we produced relatively large datasets that make a significant contribution to the identification of soil-derived wear patterns on bone tools. We also included quantitative measurements of soil properties to ensure similarities in use contexts between our experimental and archaeological analogies in order to reach reliable functional identifications. Our approaches and results, therefore, provided a solid base for re-evaluating previous research as well as building a standardized database of scientific value for future evaluation and adjustment, even if that future research is done in isolation and in different soil contexts.     

Applying dynamics and comparing life tables for Pleistocene Equidae in anthropic (Bau de l'Aubesier,Combe-Grenal) and carnivore (Fouvent) contexts with modern feral horse populations (Akagera,Pryor Mountain)

In this study, we propose a method based on life tables currently used in population dynamics and ecology to compare the mortality curves of Equidae from anthropic and carnivore fossil assemblages with those from modern populations. The combined analysis of frequency (f_x) with various ecological parameters such as mortality rate (q_x), survival rate (l_x), fecundity rate (m_x), and killing factor (k_x), established for each age class, allows us to characterize the stability of fossil populations. These ecological parameters, developed in demography, correspond to many curves and constitute a complementary approach to interpret the two main mortality models, attritional and catastrophic, often evoked in zooarchaeology. The age structures of fossil horses from the anthropic sites of Bau de l'Aubesier (Vaucluse, France) and Combe-Grenal (Dordogne, France) and the hyena den of Fouvent (Haute-Saône, France) are compared to typical catastrophic modern populations of Equidae from the National Park of Akagera (Rwanda). We also used data collected by the Bureau of Land Management for present day feral horses from Pryor Mountain (Montana, USA) which constitutes a reliable referential of a stable living population. The characterization of age structures in those different contexts is discussed as well as the impact of Neanderthals and hyenas on fossil assemblages.     

Insights into early Middle Palaeolithic tool use and hafting in Western Europe. The functional analysis of level IIa of the early Middle Palaeolithic site of Biache-Saint-Vaast (France)

Results are presented from the functional analysis of a large selection of tools from level IIa of the early Middle Palaeolithic site of Biache-St-Vaast (France). Results indicate that the site represents a hunting stand with a strong focus on hunting and animal processing activities, next to a maintenance component that appears to concern retooling and repair activities in preparation of the hunting episode(s). In spite of the site's age, a large part of the tool assemblage proves to have been used while hafted. Expertise in hafting was even quite elaborate in the sense that it includes tools for which hafting is not essential. It confirms the importance of hafting studies for improving insights into assemblage variability and past human behaviour.     

Cut marks on the Middle Pleistocene elephant carcass of Áridos 2 (Madrid,Spain)

Áridos 1 and Áridos 2 (Madrid, Spain) are two Middle Pleistocene sites belonging to the isotopic stages 9–11. Both places contain partial carcasses of Elephas (Paleoxodon) antiquus associated to Acheulian stone tools. In this work, the taphonomic study of the elephant remains of Áridos 2 is presented. This study has documented several cut marks on different bones, which indicate bulk flesh and viscerae extraction by Middle Pleistocene hominins. Several arguments are provided to support that at least some of the cut marks were made with handaxes, further suggesting that some of these artifacts were butchering tools in this stage of human evolution. Although cut marks on elephant carcasses have been documented at some Middle Pleistocene sites, very few have been published in detail to allow consideration of their status as hominin-imparted marks. By doing so, the present study provides more evidence of large carcass exploitation by hominins during this period.