From Crafting to Caching: Technological and Iconographic Analyses of Blue Creek Cache 37

This paper presents technological and iconographic analyses of a Late Classic (a.d. 600–830) lithics cache recovered from the ancient Maya site of Blue Creek, Belize. The cache consisted of 21 obsidian prismatic blades and a number of chert artifacts, including 21 stemmed bifaces, a large laurel leaf biface, and a tridentate eccentric. The technological analysis of the stemmed bifaces identified three distinct stem production techniques that may be attributable to a combination of idiosyncratic knapping gestures and laterality, or handedness. A survey of Maya iconography demonstrated that large laurel-leaf bifaces and tridentate eccentrics occur in scenes depicting sacrifice and the burning of human remains, often by ritual specialists titled ch’ajoom, or “person of incense.” It is suggested that the presence of a large laurel-leaf biface and tridentate eccentric in the cache may indicate that Blue Creek was the residence of ch’ajoom at some point during the Late Classic period.     

Recent developments in the analysis of lithic artifacts

A review of recent research on lithic technology and functional analysis is presented. Our perception of the state of the art is based on a review of the literature published during the past three years and on the topics that were covered at conferences and workshops on lithic analysis. While the goals have essentially remained the same since the turn of the century, concerns with chronology and the classification of lithic artifacts have given way to studies that treat stone implements as products of a dynamic system of human behavior. In order to understand stone artifacts and the people that made and used them, archaeologists must understand theprocesses involved in the acquisition, production, exchange, and consumption of lithic artifacts. In the past ten years, experimental studies involving the manufacturing and use of stone tools have been integrated with studies of refitted or conjoined lithic artifacts and microwear analysis. The result is a much more dynamic view of the variability in assemblages of lithic artifacts. In this review, we focus on replication and technological analysis of chipped stone artifacts and microwear analysis, and consider the implications of this research.     

龙虬庄遗址墓葬统计学分析尝试

使用统计学的方法对龙虬庄墓地的随葬品数量是与性别、年龄的关系,生产工具与男女分工关系,墓葬布局与社会结构关系进行检验,可作出更为科学的结论。     

Stone Tool Research at the End of the Millennium: Procurement and Technology

The literature of stone tool procurement and technology published in the past decade is reviewed in this article. The presentation attempts to be geographically comprehensive but, because of where it was written, it provides fuller coverage of New World publications, particularly those from North America, than of literature from the rest of the world. Topics covered include raw materials and procurement, flake experimentation, technology, and specific tool types. An article in a subsequent issue of this journal will discuss issues of function, behavior, and classification in lithic analysis.     

Stone Tool Research at the End of the Millennium: Classification, Function, and Behavior

This is the second of the two papers that review the literature of archaeological lithic analysis over the last decade. This paper concentrates on aspects of stone tool research that are not directly related to the production or procurement of the tools themselves. It is divided into classification, functional analyses, behavioral processes, and approaches to the subject currently popular among analysts. As with the previous paper, an attempt has been made to be as comprehensive as is reasonable, though availability of sources has resulted in an emphasis on North American literature.     

HDOR 410, a mid-Holocene campsite (Hadramawt, Yemen) and the difficulty of determining cultural tradition

Located in Wâdî Mikhfar, Yemen, the stratified site of HDOR 410 was excavated by the French Archaeological Mission in Jawf-Hadramawt. The site illustrates the co-existence of a form of expediency and a form of complexity in the production of lithics, revealing the presence of industries with low technological visibility (expedient production of flakes) at a time traditionally characterised by marked typological constraints (production of trihedral points).     

Microdebitage analysis: Initial considerations

Microdebitage is defined as all stone flaking residue less than 1 mm in maximum dimension. Experimental replication indicates that it is produced in great quantities by stone tool manufacture and can permeate site matrices as a permanent signature of past cultural activity. Initial sampling studies suggest that microdebitage analysis may have considerable utility as a means of lithic site surveying.     

Technological and Cultural Change Among the Last Hunter-Gatherers of the Maghreb: The Capsian (10,000–6000 B.P.)

This paper focuses on the controversy surrounding the chronological interpretation of two subdivisions of a North African Epipaleolithic culture: Typical Capsian and Upper Capsian. Although originally defined as two evolutionary phases on the basis of stratigraphy, since the development of absolute dating methods they have been considered as contemporaneous. A new approach to the lithic technology of collections from the classic sites of Bortal Fakher, El-Mekta, Relilaï, and Aïn Dokkara allows us to redefine the industry and the traditional chronology. A wide-reaching comparison including major Capsian sites, and based on cultural attribution, chronology, and lithic technology, supports our preliminary results. Around 8000 B.P., a technological change occurred, corresponding with an environmental shift, and calls into question the contemporaneity of Typical and Upper Capsian. The causes, mechanisms, and implications of this technological change are integrated into a broader discussion leading to more questions about the way of life of the makers of the Capsian, their cultural evolution, and their persistence as hunter-gatherers in a Neolithic world.     

Terminal Pleistocene–Early Holocene lithic technological organization around Lake Mojave,California

Abstract

The surface lithic scatters at two areas around Soda Lake were intensively surveyed and 3133 artifacts were analyzed in the field using four main variables to infer how Terminal Pleistocene–Early Holocene foragers organized lithic technology around pluvial Lake Mojave, California. Results indicate that early stage bifaces and flake tool blanks were created at a fine-grained volcanic (felsite) quarry/workshop complex in the Soda Mountains survey area and transported elsewhere. In addition, fine-grained volcanic bifaces were reduced and bifaces and flake tools of cryptocrystalline silicates and obsidian were finished, used, and/or discarded at a habitation area on the ancient shorelines near Little Cowhole Mountain. Comparisons with nearby sites of similar ages (at Ft. Irwin and China Lake) reveal many similarities in lithic technological organization. Lake Mojave—an important locus of prior research—can now be integrated into recent Mojave Desert and Great Basin technological organization studies.     

Settlement networks and the organization of lithic tool production in the Late Prehistoric period (a.d. 1000–1780), Lower Nueces River Valley,South Texas

Abstract

Evidence from one of several Late Prehistoric settlement networks in the Lower Nueces River Valley in Texas demonstrates that base camps were surrounded by smaller-sized temporary camps. Local groups utilized nearby stone quarries, moved raw material to their settlements and reduced cores, preforms, and bifaces into tools for domestic use and portable toolkits. The Lower Nueces River Valley settlement organization and tool production during this period suggest restricted mobility, base camp sedentism, and abundant resource supply. This organizational structure promoted a complex foraging economy and perhaps the emergence of territorial clustering.     

High-Tech Foragers? Folsom and Later Paleoindian Technology on the Great Plains

Archaeologists generally argue that early (ca. 11,000–8000 B.P. populations on the North American Great Plains moved over very large areas, relying on sophisticated, biface-based flaked stone technology and on extensive resharpening and recycling of tools to cope with unpredictable access to raw material sources. This paper reviews the development of this reconstruction and considers the degree to which data from assemblages of Paleoindian flaked stone tools support it. Published information implies that patterns of raw material use vary greatly over the Plains, that bifaces were not the centerpiece of Paleoindian technology, that there are no published efforts to document an unusual degree of resharpening or recycling, and that the data that are available on these topics do not suggest that either was important. Detailed analysis of one assemblage, from the Allen site in southwestern Nebraska, carried out with these issues in mind, shows similar patterns. The great difference between what the literature says about Paleoindian technology and the documented character of that technology suggests that Paleoindian lifeways were far more variable than current discussions suggest.     

Advances in the archaeology of the Pampa and Patagonia

Archaeological data reveal two distinctive cultural adaptations on the Pampa and Patagonia of Argentina: terrestrial hunter-gatherers in the former and most of the latter region and maritime hunter-gatherers along the southern extreme. Both adaptations were achieved by the end of the fifth millennium B.C. Thereafter, a stable equilibrium was maintained, with a slow drift toward greater emphasis on resources providing the maximum return for the least effort. The high productivity of the Fuegian environment sustained a population 30 times greater than occupied the Pampa and continental Patagonia prior to Araucanian penetration in the sixteenth century A.D. The long-term stability is attributable to the absence of environmental or demographic pressures or encroachments by neighboring groups, which might have made more intensive exploitation of the environment necessary.     

Bidirectional blade technology on naviform cores from northern Arabia: New evidence of Arabian-Levantine interactions in the Neolithic

Discovered in March 2015, the sites of DAJ-112 and DAJ-125 in the Al-Jawf province of northern Saudi Arabia consist of a large collection of surface lithic artefacts that can be compared to well-known Pre-Pottery Neolithic (PPN) B technology from the Levant: the two sites include bidirectional blade technology with naviform core preparation and opposed platforms surface exploitation, as well as burin production at a wide scale. Other surface scatters have been identified during the 2013 and 2015 surveys, showing these two sites are not isolated in Al-Jawf, as rather important occurrences of Early Holocene technology have been identified across the region. Although the sites from Al-Jawf are surface occurrences and not radiometrically dated, the finds have proven to be extremely significant, representing a southward incursion of classic naviform cores-based technology, thus expanding the geographical distribution of this technology beyond the Levant. By addressing the lithic evidence from northern Arabia, the expansion and/or influence of PPN populations and cultural elements will be discussed.     

Trampling vs. Retouch in a Lithic Assemblage: A Case Study from a Middle Stone Age Site,Steenbokfontein 9KR (Limpopo,South Africa)

At the site of Steenbokfontein 9KR, virtually 80% of the lithic blanks presented retouch—an extreme proportion for Middle Stone Age assemblages. The high percentage of putative retouch led us to investigate whether post-depositional processes played a role in the preservation of the lithic assemblage. We designed and performed an experiment that reproduced all the archaeological conditions inferred from the site formation analyses to determine if the archaeological assemblage was trampled or retouched. We defined several qualitative attributes and studied both trampled and retouched experimental samples, and compared them to the archaeological material. We subsequently performed different statistical analyses and a correspondence analysis with all the macro qualitative attributes that we defined. We were then able to discern which attributes were the most eloquent variables and assess the usefulness of a multivariate analysis in discriminating between trampling and retouch.     

A Russian Before and After the Revolution: P. P. Efimenko,a Pioneer of Levantine Prehistoric Research

ABSTRACT

This paper offers a reappraisal of the Levantine prehistoric chronological sequence constructed by Pyotr Petrovich Efimenko (1884–1969). As a young Russian prehistorian, Efimenko visited Palestine in 1913, collected material from several sites and, in 1915, published a synthesis in which he compared the prehistory of Europe with that of the Near East. This was part of his comprehensive monograph on the Prehistory of Eurasia which was also based on his work at the sites of Mezin and Kostenki and the Palaeolithic of Russia. The current paper also attempts to evaluate the career of Efimenko particularly in light of the unfamiliarity of his work among prehistorians working in the southern Levant.     

Late Classic Maya lithic production and exchange at Rio Bec and Calakmul,Mexico

Abstract

The organization of production and exchange of everyday lithic items is important in defining Classic period lowland Maya economic organization, but the current debate relies on the study of a few lithic workshops, whereas little is known about the consumers’ quotidian acquisition of everyday tools. I suggest looking at the problem from the point of view of the household and distinguishing local from nonlocal production by comparing experimental and quantitative data. Examination of the chert collections from households at Rio Bec and Calakmul enabled me to distinguish two different types of chert biface production and distribution during the Late Classic period (a.d. 650–800), namely by means of markets and itinerant craftsmen. Both sites had very different political organizations, but households from both cities acquired lithics through similar networks, showing that this particular aspect of the domestic economy probably had little to do with political power and centralization in the region.     

Discoveries of Neolithic prehistoric sites at Pleistocene carbonate rock shelters on the east coast of the UAE

Three newly discovered prehistoric sites on the east coast of the United Emirates (UAE) are described. All are located on surfaces of Pleistocene carbonates or rock shelters that are generally rare along the eastern coast of the Gulf of Oman. Aqqah 1 (Le Meridien al Aqqah Beach Resort), the most important and best preserved of these sites, is a partially collapsed rock shelter with an exposed section, lithic finds and marine molluscs. Deriving an exact date from the material present is difficult because of a lack of comparanda. A bifacial fletched arrowhead made of yellow jasper and the lithic debris of five different raw materials as well as an undecorated ceramic fragment might suggest a date in the Late Neolithic or Early Bronze Age. The presence of many marine bivalves and snails with operculae, which differ from recent coastal species, indicates the collection and consumption of living molluscs by the prehistoric population of Aqqah. Nearby burials may be related to the rock shelters.     

A New Methodology and Classification System for Describing Three‐Dimensional Particle Formats: Application to Clastic Lithic Products of Archaeological and Geological Origin

A new classification system is proposed to describe the volumetric formats of clastic lithic products of geological and archaeological origin. In order to build this operative classification, the rectangular block or cuboid is established as the standard geometric format to represent their three‐dimensional format (the X‐axis being length or long diameter, the Y‐axis being the width or intermediate diameter, and the Z‐axis being the thickness or short diameter) on a two‐dimensional diagram. To obtain this graph, each absolute coordinate (X, Y, Z) defining the prisms is projected on to an auxiliary plane with a new set of relative coordinates (x, y, z), expressed as the percentage of their sum. The projection generates a triangular diagram on which the indices of elongation and flatness are represented. A geometric transformation converting the triangular diagram into a quadrangular diagram has been produced in order to better represent the scatter points. Then, a double scale is necessary: (i) an absolute scale to quantify the indices, and (ii) a relative scale to calculate where the graphic locus is projected. This new graph also allows us to work with statistical parameters. Finally, two classic examples of applications selected from the literature are shown.