Assessing the macrofracture method for identifying Stone Age hunting weaponry

Macrofracture analysis is an experimentally derived method used as an initial step in investigating the hunting function of stone artefacts. Diagnostic impact fractures, which can only develop as a result of longitudinal impact, underpin this method. Macrofracture analysis recently gained favour in Middle Stone Age studies, supporting hypotheses for effective hunting during the late Pleistocene in southern Africa. However, the factors affecting diagnostic impact fracture formation and the interpretation of these fracture frequencies are not yet fully understood. This paper outlines a set of experiments designed to test macrofracture formation under human and cattle trampling and knapping conditions. The results show that: (a) macrofractures occur frequently when stone artefacts are trampled by cattle and humans and in knapping debris; (b) diagnostic impact fractures occur on some of the trampled flakes and knapping debris (≤3%), but significantly less often than in previous hunting experiments; (c) when they do occur, they are likely produced by longitudinal forces similar to those experienced during hunting; (d) considering artefact morphology is important during macrofracture analysis; and (e) macrofracture analysis is not a standalone method, but is most useful as part of a multi-analytical approach to functional analysis. These experiments help to establish a significant baseline diagnostic impact fracture frequency for the interpretation of archaeological macrofracture frequencies.     

Hunting with Howiesons Poort segments: pilot experimental study and the functional interpretation of archaeological tools

For many decades the use of backed pieces from the Howiesons Poort, between about 70 ka and 55 ka ago, in South Africa has been a point of discussion. Recently direct evidence has been provided to associate these tools with Middle Stone Age hunting strategies. Yet, whether they were used to tip hunting weapons or as barbs remained an open question. In this paper we introduce a set of pilot experiments designed to test the effectiveness of Howiesons Poort segments, the type fossils of the industry, hafted in four different configurations as tips for hunting weapons. It is shown that the morphological type can be used successfully in this way. We present the results of a macrofracture analysis conducted on the experimental tools and compare these to results obtained from three Howiesons Poort backed tool samples. By correlating experimental outcomes, macrofracture data and the interpretation of micro-residue distribution patterns, we provide some insight into the functional variables that might be associated with Howiesons Poort segments.     

Rock type variability and impact fracture formation: working towards a more robust macrofracture method

Investigations into the development of weapon systems are increasingly important in archaeological debates about human evolution and behavioural variability. ‘Diagnostic’ impact fractures are key, but controversial, lines of evidence commonly used in such investigations. In 2009 a series of experiments was initiated to investigate the processes associated with macrofracture formation specifically focussing on the taphonomic factors affecting the formation of ‘diagnostic’ impact fractures (DIFs). This paper adds to that experimental data set with macrofracture results from recent knapping experiments investigating rock type variability and DIF formation. These results show that rock type variation plays less of a role in DIF formation than variables related to use and lithic taphonomy. The collective results of this experimental series show that the location, co-occurrence, type and proximity to retouch on a tool are all important means of distinguishing between weapon and non-weapon related DIFs. Collectively these macrofracture patterns are more important in diagnosing weapon components than any one ‘diagnostic’ impact fracture is alone. Overall, these experimental studies are showing that background ‘noise’ in the form of non-hunting related impact fractures, exists in many macrofracture results and that much work remains in securing the analytical robusticity of the method. The paper concludes that the macrofracture method is not a stand-alone method, but when used with caution and in conjunction with other lines of evidence it is a useful, time-efficient, tool for generating assemblage-level use-trace data.     

Experimental examination of animal trampling effects on artifact movement in dry and water saturated substrates: a test case from South India

This paper presents the motivation, procedures, and results of an experiment that examines short episodes of animal trampling in dry and water saturated substrates in South India. While horizontal artifact displacement was similar to that modeled by other trampling experiments, vertical artifact displacement in water saturated substrates was greater than any reported experiment to date. The toolstone used in this experiment, a silicious limestone, exhibited minimal damage after trampling. Artifact inclination patterning appeared to be a potentially diagnostic middle-range marker of trampling in water saturated substrates. Given the abundant number of Paleolithic sites that are located on flat, open surfaces near water-bodies, or experience monsoonal climatic regimes, we propose that future excavations should measure artifact inclination on a regular basis.     

Slicing Cut Marks on Animal Bones: Diagnostics for Identifying Stone Tool Type and Raw Material

Abstract

Butchering implements leave identifying signatures on bones. From these signatures, it is possible to distinguish the different raw materials and types of chipped stone butchering tools. The results of recent experiments enable us to distinguish the different types of raw materials and tools used in the butchering process, in particular those implements that produce slicing cut marks. Three types of chipped stone tools (blades,flakes, and side scrapers) and raw materials (flint, obsidian, and quartzite), as well as issues relevant to lithic production and use were examined and tested. Silicone molds of cut marks produced by each of the instruments were made and subjected to analysis in light optical and scanning electron microscopes under various levels of magnification. The criteria used for distinguishing tool type, raw material, type of production and use characteristics of the respective cutting instruments are presented, as well as a discussion of the application of the experimental results to the Early Bronze Age I site of Afridar, Israel. The data from Afridar indicate that almost all of the butchering marks on animal bones from the site were made by stone tools, in particular haphazardly-made flakes.     

Taphonomy at Hermies,France: A Mousterian Knapping Site in a Loessic Context

Abstract

The recent excavation of Hermies, a Mousterian (Middle Palaeolithic) flintknapping site in northern France, sheds light on natural alteration of a lithic assemblage in a loessic sediment. An extensive, well preserved stratigraphic zone grades into a more disturbed area. During excavation we recorded taphonomic indicators such as the dip and strike of in situ pieces, the scattering of artifacts and refitting of broken specimens, and microscopic alteration, principally natural, of flakes. While the composition of the lithic assemblage is less sensitive to erosion than we would expect, the vertical and horizontal dispersion of finds at Hermies is related to natural processes active in the lower and wetter parts of the site. Of particular note is that the dispersion can be associated with polish produced by the natural growth of roots rather than by human use. Some “tools”conventionally identified as denticulaters and notches display no use-wear, and we suggest they were created accidentally by processes such as shock, trampling, and crushing within dense clusters of debitage. This correlation of debitage clusters with increased presence of notches and denticulates is reported from many open-air Mousterian sites; since these two tool forms define the Denticulate Mousterian facies, some reevaluation of those facies is necessary.     

… OF SHERDS AND SOIL AND SEALING LAYERS, OF COBBLING AND COINS…

Summary. From 1985 to 1987 an experiment was conducted alongside an excavation to examine the effect of trampling on cobbled layers, and to see if the movement of small objects could change their stratigraphic relationships. An experimental area was excavated and backfilled with soil and a cobbled layer containing plastic markers, flower pot sherds and coins. The area, part of a path, was subjected to daily trampling, and was excavated after seventeen months, using normal excavation methods; all the soil was dry sieved. The results show varying recovery rates and horizontal movements for different types of object, and demonstrate the need for further investigation of the causes and implications of differential movement of buried objects.     

Variability in Faunal Assemblages: The Influence of Hunting Skill, Sharing, Dogs, and Mode of Cooking on Faunal Remains at a Sedentary Kalahari Community

Variability in faunal assemblages from different sites and/or from different time periods is often attributed to economic or taphonomic factors. The role of sharing on faunal remain distributions is compared to other factors that have been suggested to influence these distributions, such as hunting skill. Faunal species and skeletal elements are compared among three hunter—gatherer camps that form a sharing network. These are contrasted with those of two other hunter—gatherer camps located at the same Kalahari community occupied by an unusual family that is a relative isolate in terms of sharing. The effect of sharing on equalizing variation in hunting success as reflected in the faunal remain inventory is explored from the five camps inventoried in 1990. Complicating factors which tend to affect faunal remain frequencies are also examined, such as cooking technique and dogs. All faunal remains visible on the surface of each camp were recorded according to species, element or fragment portion, age (mature or immature), and, when possible, side. At all but one camp, surface faunal remains were recorded both before and after ethnographic observations during the dry season of 1990. In addition to hunting success, all occurrences of sharing and consumption of meat were recorded during these observation periods and those conducted on and off between 1987 and 1992. Although participation in a sharing network obscures differences in hunting skill in the archaeological record, sharing impacts on faunal assemblages in interesting ways that are potentially archaeologically visible. Sharing in strongly egalitarian societies levels unequal hunting skill that could otherwise affect faunal remain frequencies, taxa richness, meat weight, and other indices measured here. In these societies, sharing reinforces social bonding between kin and friends in ways that help unit families from different camps.Zooarchaeologists have become accustomed to high levels of confidence in their inferences about the origins, functions, and responses to stress of animal remains. This confidence rests on the causal and functional links between attributes of these remains and the processes and contexts which generate them. Their investigations are presently moving toward wider inferences about the context and functions of bones in ancient hominids' behavioral systems… Zooarchaeologists now need a different set of inferential strategies than that which characterized their preceding phase of research. (Gifford 1991:215)     

Experimental production of bending and radial flake fractures and implications for lithic technologies

Bend and radially broken flake tools have been identified in Paleolithic and Paleoindian assemblages, and their presence raises important questions. Were these breaks intentionally produced to serve as tool edges or were broken flakes simply scavenged? More importantly, can we distinguish between intentionally produced breaks and those produced incidentally? Experimental archaeology can help answer these questions. In this paper, three sets of experimentally produced bend and radial flake breaks were compared. Flakes were intentionally broken by percussion, and these breaks were compared to those produced during bifacial core reduction and by flake trampling. The presence of point of impact markers, near ninety degree break angles, and an assemblage with high percentages of bend and radial breaks distinguish intentional fracture from incidental fractures produced during bifacial reduction. High percentages of radial breaks distinguish intentional fracture from trampling. Finally, it may not be possible to identify intentional breaks in a bifacial reduction assemblage severely affected by flake-on-flake trampling.     

Testing heterogeneity in faunal assemblages from archaeological sites. Tumbling and trampling experiments at the early-Middle Pleistocene site of Gesher Benot Ya’aqov (Israel)

The current paper reports an experimental case study to test the heterogeneity of faunal assemblages from the Early-Middle Pleistocene Layers V-5 and V-6 of the Gesher Benot Ya’aqov Acheulian site (Israel). Tumbling and trampling experiments were initiated to gain qualitative insight into processes of bone modification and to assess the timing of the biostratonomic chronology, as it was assumed that both mechanisms were responsible for the formation of striations documented on the bone surfaces from the site. The tumbling experiments mimicked sediment movement in a calm lacustrine shoreline environment whereas the trampling experiments investigate the role of animal/hominin activities in dry, muddy and wet environments. Models for the internal operational sequence of an abrasional process due to uni- and multidirectional water movement and of a trampling scenario are presented. These models are used for the interpretation of the fauna from Gesher Benot Ya’aqov.     

Experimental and archaeological investigations of backed microlith function among Mid-to-Late Holocene herders in southwestern Kenya

This study takes an experimental and comparative approach in order to evaluate the circumstances driving the deployment of microlithic tool technologies by food-producing mobile herders during the Mid-to-Late Holocene in southern Kenya. The predominately obsidian microliths used by contemporaneous, but culturally distinct, herding communities were replicated and used as arrow tips in archery experiments and within composite knives used in animal processing. This allowed for patterns of damage associated with production, different forms of projectile use, and butchery to be identified on microlithic specimens and evaluated against each other to assess the criteria for diagnostic macrofracture and wear patterns reflective of each activity. Experimentally generated criteria were used to identify the most likely functions for microlithic tools in three archaeological assemblages belonging to early Kenyan pastoralists. The analyses showed that while the same microlithic form is shared by culturally distinct groups across a wide time range, these tools were being used to vary different functions that do not clearly correlate with subsistence economy, culturally affiliation, or time period. Environmental variability and instability throughout the Late Holocene likely contributed to the persistence of highly adaptable microlithic toolkits. These data contribute to ongoing dialogues on the emergence and evolution of microlithic toolkits.     

Insights into early Middle Palaeolithic tool use and hafting in Western Europe. The functional analysis of level IIa of the early Middle Palaeolithic site of Biache-Saint-Vaast (France)

Results are presented from the functional analysis of a large selection of tools from level IIa of the early Middle Palaeolithic site of Biache-St-Vaast (France). Results indicate that the site represents a hunting stand with a strong focus on hunting and animal processing activities, next to a maintenance component that appears to concern retooling and repair activities in preparation of the hunting episode(s). In spite of the site's age, a large part of the tool assemblage proves to have been used while hafted. Expertise in hafting was even quite elaborate in the sense that it includes tools for which hafting is not essential. It confirms the importance of hafting studies for improving insights into assemblage variability and past human behaviour.     

Technology based evolution? A biometric test of the effects of handsize versus tool form on efficiency in an experimental cutting task

The use of stone cutting tools opened a novel adaptive niche for hominins. Hence, it has been hypothesised that biomechanical adaptations evolved to maximise efficiency when using such tools. Here, we test experimentally whether biometric variation influences the efficiency of simple cutting tools (n = 60 participants). Grip strength and handsize were measured in each participant. 30 participants used flint flakes, while the other 30 used small (unhafted) steel blades. Variations in basic parameters of tool form (length, width, thickness, cutting edge length) were recorded for the 30 flint flakes. It was ensured that mean handsize and strength in each participant group were not significantly different to investigate the effect of tool variation. The experimental task required cutting through a 10 mm-diameter hessian rope. Cutting efficiency was measured using both ‘Number of cutting strokes required’ and ‘Total time taken’. Results show that both efficiency measures were significantly correlated with handsize using all 60 participants. However, no significant differences were found between the flake and blade groups in terms of mean efficiency. Nor was any significant relationship found between tool form parameters and efficiency in the flint flake group. We stress that our results do not imply that tool form has no impact on tool efficiency, but rather that – all other things being equal – biometric variation has a statistically significant influence on efficiency variation when using simple cutting tools. These results demonstrate that biomechanical parameters related directly to efficiency of use, may plausibly have been subject to selection in the earliest stone tool-using hominins.     

A new protocol to differentiate trampling marks from butchery cut marks

Microscopic signatures have previously been used to emphasize the similarities of butchery and trampling marks. The experimental background applied to differentiate both types of marks has been rather limited and authors have sometimes reached conflicting conclusions. This is partly due to methodological reasons: some authors have used very high magnification to examine microscopic features, whereas others have relied on more reduced magnification. Likewise, some experiments have exposed bones to trampling for reduced periods (minutes) whereas others have used longer time periods (hours). The present study stresses that the use of a scanning electronic microscope is not practical for identifying the impact of butchery and trampling marks in complete bone assemblages. It also emphasizes that previous studies have not addressed all the possible variables that could potentially be used to discriminate these marks, nor have they quantified the morphological patterns of each type of mark. Here we present a multivariate analysis of more than a dozen variables and show that butchery and trampling marks have very distinctive microscopic morphology. We advocate the use of a low magnification approach (≤40×), which can enable the analysis of complete assemblages using either hand lenses or binocular lenses. We also show the morphological criteria that differentiate butchery cut marks made with simple and retouched tools. We show that whereas complete discrimination of marks is impossible due to some degree of overlap, the list of criteria derived through multivariate analyses can be confidently used to correctly differentiate butchery and trampling marks in more than 90% of cases.     

Experimental Flake Scatter-Patterns: a New Interpretative Technique

Abstract

Scatters of flint waste flakes are among the commonest finds on prehistoric sites. To understand how such patterns are formed, we made a series of Neolithic axe roughouts and other tools and recorded the distribution of waste flakes. The most important variable affecting the size and shape of flake scatter patterns seems to be the knapper's position. The applications of these experiments to prehistoric data are considered.     

A tale of two sites: Functional site differentiation and lithic technology during the Late Pithouse period in the Mimbres area of Southwestern New Mexico

The raw materials from which stone tools are made can provide considerable information relevant to behavioral variation within a prehistoric population. By examining the stone used for tools from two different types of Late Pithouse period (A.D. 550-1000) residential sites from the Mimbres Mogollon area of Southwestern New Mexico, this paper illustrates how understanding the lithic landscape of a region provides a means to assess behavioral variation in stone procurement practices. The analysis indicates that the differences in mobility and economic pursuits between longer-term residential sites containing pit structures and a shorter-term seasonal residential site with ephemeral architecture structured the raw material procurement practices of site’s occupants. Pit structure sites were focused on agricultural pursuits and used a technology that centered on the production of informal tools fashioned from locally available raw materials. The seasonal residential site focused on wild resources and evidenced greater reliance on formal tool production using raw materials acquired from beyond the immediate vicinity of the site. Despite increasing sedentism and agricultural dependence of the region’s population, some portion of the population exercised seasonal mobility strategies and associated technological and behavioral practices more typical of hunting and gathering populations, suggesting a diverse socio-economic system within the region.     

A Self-triggered Device to Catch Elk as Early as the Neolithic: A Study from an Archaeological and Ethnological Point of View

The paper deals with equipment and methods used by Stone Age man in hunting elk in the extensive woodlands of interior Norrland, northern Sweden. The prevailing division into active hunting and trapping is applied. Ethnological source material is used to exemplify various ways of hunting elk. The methods discussed are: (1) active hunting on skis in winter, (2) driving the animal into an enclosure on bare ground, (3) catching in a pitfall, (4) snaring, and (5) trapping by a self-triggered spear/arrow. A rock carving at Na¨mforsen, Ångermanland, northern Sweden, is evidence that a self-triggered device to catch elk with a spear or arrow was in use even in the Neolithic. It is generally known that the elk was a very important prey for Stone Age man in the forests of Norrland. This is evident from figural portrayals and food remains alike. It is easy to suspect other uses for elk, but they are difficult to prove. Occasionally, however, parts of tools made from elk antler and bone have been found.     

Points and convergent tools in the European Early Middle Palaeolithic site of Payre (SE,France)

The lithic assemblage from the Middle Palaeolithic site of Payre (Rhone Valley, France) contains a large number of convergent tools and pointed tools of various shapes, sizes and retouch types. These were excavated from several archaeological units, dating from marine isotopic stages 8–5, which also yielded human skeletal remains. Consideration of this large tool kit has led to an improved analysis of Middle Palaeolithic tools with two retouched convergent edges. The 350 tools were not described within the classical typological framework, but, rather, from a lithic technological perspective in relation to a discoid debitage. In addition, an initial macroscopic use-wear analysis aided in establishing whether they were used according to their technical and/or morphological features. The Middle Palaeolithic convergent tools from Payre are shown to be quite diversified, and the question of the significance of the retouch and the definition of the various types is addressed. Initial functional results indicate that a clear relationship between shape and function cannot be easily established, and that these tools were used as hand tools. This study contributes to the debate on the use of stone tip spears in the Early European Middle Palaeolithic.     

Assessing a Computer-aided Instructional Strategy in a World Geography Course

An experiment was conducted to compare student achievement under two differing instructional strategies: a small-group and computer-aided strategy versus lecture instruction. Evaluation was extended in several ways beyond comparison of overall student scores. Results show significant improvements in student achievement produced by the computer-aided strategy with reference to gender, ethnicity and levels of cognitive learning. The study concludes that experimental evaluations of CAI serve best as formative tools to match instructional strategies to specific types of content material and different types of students, and that instructional media are best evaluated along with the instructional method in which they are embedded.     

Edge Angle as a Variably Influential Factor in Flake Cutting Efficiency: An Experimental Investigation of Its Relationship with Tool Size and Loading

Simple flake cutting tools were utilized across broad chronological and geographical ranges during prehistory. Fundamental to their functional utility is the presence of a relatively acute working edge. The acuteness of this ‘edge angle’ is widely hypothesized to be a primary determinant of cutting efficiency and, subsequently, of potential consequence to prehistoric peoples. However, the influence of the cutting edge angle in flake tools on the ability (efficiency) of tool users to cut through objects has not been empirically investigated under explicitly stated experimental conditions. Moreover, no consideration has been given to whether this relationship is dependent upon the size of the tool. Here, the influence that edge angle exerts on human stone tool users is examined experimentally in terms of efficiency during a cutting task, while also considering the relationship between edge angle, loading (i.e., the force applied) and overall flake size. The results demonstrate that there is a highly significant relationship between more acute working edges and increased cutting efficiency in the smallest flake tools tested. Above a certain flake‐size threshold, however, the working edge angle has no influence on cutting efficiency because larger flakes appear to facilitate the application of greater working loads by tool users. These results have important implications for potential flake selection criteria by prehistoric peoples, especially in relation to utility, function and the changing effects of edge angle through a sequence of retouch.