广东博罗先秦硬陶的XRF和INAA研究

为揭示广东博罗梅花墩、银岗、横岭山三地古陶器的产源、烧造工艺、技术传播和化交流等方面情况,用波长色散X射线荧光分析(WDXRF)、仪器中子活化分析(INAA)同时测量了广东博罗梅花墩、银岗、横岭山等三地点所出38片西周至春秋、战国硬陶中Al、Ba等元素的含量。并用主成分分析分别处理了测量数据。两套数据的分析结果均表明,梅花墩、银岗和横岭山的硬陶原料互不相同,各地点硬陶可能主要是“自烧自用”。数据分析还表明在南方各省区中,广东硬陶具有Al2O3含量偏高这一明显的地区特征。     

NON‐DESTRUCTIVE ANALYTIC METHOD USING XRF FOR DETERMINATION OF PROVENANCE OF ARCHAEOLOGICAL OBSIDIANS FROM THE MEDITERRANEAN AREA: A COMPARISON WITH TRADITIONAL XRF METHODS*

A non‐destructive analytical method using wavelength‐dispersive X‐ray fluorescence (WDXRF) that allows the establishment of the provenance of archaeological obsidians was developed and a comparison with the classical XRF method on powders is discussed. Representative obsidian samples of all the geological outcrops of archaeological interest of the Mediterranean area (Lipari, Pantelleria, Sardinia, Palmarola and the Greek islands of Melos and Gyali), were analysed with the normal procedures used in rock analysis by XRF (crushing, powdering and pelletizing). The non‐destructive XRF analysis was instead conducted on splinters taken from the original geological pieces, with the shape deliberately worked to be similar to the refuse usually found at archaeological sites. Since the analysis was conducted on the raw geological fragment, intensity ratios of the suitably selected chemical elements were used, instead of their absolute concentrations, to avoid surface effects due to the irregular shape. The comparison between concentration ratios (obtained by traditional XRF methods) and the intensity ratios of the selected trace elements (obtained from the non‐destructive methodology) show that the different domains of the chemical composition, corresponding to the geological obsidians of the source areas, are perfectly equivalent. In the same way, together with the geological splinters, complete archaeological obsidians, from Neolithic sites, may be analysed and their provenance may be determined. The proposed non‐destructive method uses the XRF method. Due to its sensitivity, low cost and high speed, it is surely an extremely valid instrument for the attribution of the provenance of the archaeological obsidian from Neolithic sites.     

黄瓦窑琉璃构件胎釉原料及烧制工艺研究

黄瓦窑位于我国辽宁省鞍山市海城地区,经专家考证它是专门为清代辽宁地区烧制皇家建筑琉璃构件的窑厂。本文利用X射线荧光渡谱法、X射线衍射法、热膨胀分析等方法研究了黄瓦窑琉璃的胎釉原料及烧制工艺情况。研究表明：黄瓦窑烧制的建筑琉璃为低温铅釉、二次烧成,胎体属于我国陶瓷史上比较少见的MgO—Al2O3-SiO2三元体系,胎体的热膨胀系数比釉层高2～3×10—6／℃。     

DETERMINING POTTERY PROVENANCE: APPLICATION OF A NEW HIGH-PRECISION X-RAY FLUORESCENCE METHOD AND COMPARISON WITH INSTRUMENTAL NEUTRON ACTIVATION ANALYSIS*

A recently developed high-precision X-ray fluorescence (XRF) method, applied for the first time to the study of archaeological pottery, determines the abundances of 13 trace and four major elements from one X-ray spectrum acquired over a 1000 second counting interval. For replicate archaeological samples, the short-term and long-term measurement precisions were close to 1% for the ten elements measured with highest precision. These are comparable to the best results achieved on replicates of clay and pottery standards, and obsidian, using instrumental neutron activation analysis (INAA). High-precision XRF analysis, however, does not require a nuclear facility, and is markedly preferable to INAA in terms of the ease of both sample preparation and analytical procedure. Consequently, element abundance data can usually be provided by a single analyst within a few hours after the start of sample preparation. The accuracy of the method, determined by comparison with data of other workers on eight standard reference materials, averaged 2.4% for the ten best-agreeing elements. The effectiveness of the method for determining pottery provenance is demonstrated for a difficult problem, in which high-precision XRF analysis successfully distinguished the products of two nearby pottery manufacturers in Roman Galilee (Shikhin and Nahif) that had not been clearly differentiated by INAA. The greater effectiveness of high-precision XRF than INAA in this provenance study is a result of the different array of elements measured, and the higher precision obtained for certain elements, by XRF. These results suggest that high precision XRF has potential broad applicability for pottery provenance studies.     

司马金龙墓出土木板漆画屏风残片的初步分析

为了解山西大同北魏司马金龙墓出土木板漆画屏风的颜料使用情况和制作工艺信息,利用Micro-Raman、FrlR、XRF、断面切片等技术,对屏风残片上的四种主要颜色(红,黑,黄,白)、红色漆底层、断面分层进行分析与鉴别,结果如下:(1)屏风所使用的颜料有朱砂、炭黑、雌黄、雄黄、石膏.(2)屏风的红色底层系由生漆与朱砂调和、结膜而成,其中可能未曾添加桐油.(3)屏风彩绘部分的颜料分层十分明确,各层的厚度相对均匀,反映出制作者较为高超的绘画技法.(4)在颜料层、木胎与红色漆底层之间的"过渡层"中,分别观察到一些白色物质.初步分析后认为,"过渡层"中白色物质为羟基磷灰石的可能性较大.颜料层中白色物质的成分和物相仍有待进一步的分析.     

THE DESIGN OF EVALUATION OF ASSAYS OF TRACE ELEMENTS IN A FOSSIL BONE*

The flame atomic absorption spectroscopy method of analysis of trace elements (Mn, Sr, and Cu) in a mammoth's bone and the method of estimation of the data using regression analysis are described. The concentration fields of the single elements in a cross-section through the bone are well described by a fourth degree polynomial. The minimum values and their coordinates have been determined. A method of determination of the original concentrations of trace elements in fossil bones is described further. The approximating features of the regression exponential equations and of the diffusion functions of various shapes were determined and a method for calculating the concentrations and diffusion properties of the bones once deposited in the soil is suggested. The original trace element concentration can be estimated by extrapolation of a suitable exponential or diffusion function.     

PROVENANCE STUDIES OF CHALCOLITHIC OBSIDIAN ARTEFACTS FROM NEAR LAKE URMIA, NORTHWESTERN IRAN USING WDXRF ANALYSIS

In 2005–2006 we initiated a major archaeological survey and chemical characterization study to investigate the long-term use of obsidian along the eastern shores of Lake Urmia, northwestern Iran. Previous research in the area suggested that almost all archaeological obsidian found in this area originated from the Nemrut Daĝ source located in the Lake Van region of Anatolia (Turkey). More recent research on obsidian artefacts from the Lake Urmia region has identified a significant number of obsidian artefacts with compositions different from the sources near Lake Van. This suggests that the obsidian artefacts are from a yet to be identified geological source, but possibly one that was not too distant. In order to advance our knowledge of Iranian obsidians and eventually refine provenance criteria we analysed obsidian from 22 Chalcolithic sites and some source areas. The compositions of both obsidian source samples and artefacts were determined using wave length dispersive X-ray fluorescence spectrometry (WDXRF). This paper presents results from the trace elemental analysis of both geological and archaeological obsidians, providing important new data concerning the diachronic relationship between lithic technology and raw material in the north-west of Iran.     

SEISMIC DESIGN AND ANALYSIS OF A KNEE BRACED FRAME BUILDING

A five-storey steel frame incorporating dissipative knee elements is designed using the Eurocode 8 pushover analysis method. The non-linear analysis makes use of a novel knee element model capable of accurately simulating the bending and shear behaviour observed in full-scale tests. The performance of the structure is assessed using non-linear time-history analysis. This shows that the knee elements can be designed to yield under small earthquakes or early in a strong one (maximising their energy dissipation) while still being able to withstand a large event without collapse. Knee elements thus have the potential to give excellent seismic performance in steel framed structures. The time history analysis results are compared to those obtained with the three different pushover analysis methods (Eurocode 8, FEMA 356 and ATC 40). The FEMA 356 method, which includes a more accurate representation of the structure's significant post-yield stiffness, gave the closest agreement with the time history analyses, while the Eurocode 8 method gave rather conservative results and the ATC 40 method appears non-conservative for this type of structure.     

Wavelength‐dispersive X‐ray fluorescence analysis of ancient glasses*

The application of X‐ray fluorescence to the study of the composition of ancient glasses has been limited by the large amount of material required for samples. In this paper the setting of a reduced sampling XRF method for the analysis of ancient glasses is described. The method involves the preparation of glass beads by melting the sample with lithium tetraborate flux. By means of reference and synthetic samples, the method allows regression curves to be set, covering broad ranges from ppm to high concentrations. By means of a single program, up to 31 elements of interest in the study of ancient glass are analysed. The reproducibility, sensitivity and reliability of the method are discussed. The results demonstrate that 0.2 g of glass is sufficient to obtain accurate and sensitive analyses for most of the elements of interest.     

ON THE NUMBER AND SIZES OF ANIMALS IN ARCHAEOLOGICAL FAUNAL ASSEMBLAGES

This paper presents a method for dealing with unpaired skeletal elements in order to approach the questions of (1) how many animals are represented in an assemblage; and (2) how large these individuals were. The method is designed for use with fish remains and can easily be extended to paired elements. It is shown how the interplay between the data appropriate to the solution of both problems may be compared in order to provide a method of verification of the results arrived at by standard methods of assessment of the minimum number of individuals.     

北京故宫和辽宁黄瓦窑清代建筑琉璃构件 的比较研究

为了更好地揭示清代不同地区建筑琉璃构件的原料、烧制工艺及其性能关系,本工作以北京故宫和辽宁黄瓦窑清代建筑琉璃构件为研究对象,利用WDXRF、EDXRF测定琉璃构件胎、釉的化学组成,利用热膨胀仪和理论计算方法测试计算胎、釉的热膨胀系数。在此基础上,研究了两地清代建筑琉璃构件胎釉的化学组成规律和胎釉热膨胀系数的匹配性关系。结果表明:两地琉璃构件釉料的化学组成基本一致,而琉璃构件胎体原料不同,北京故宫清代琉璃构件胎体化学组成属于硅-铝体系,辽宁黄瓦窑的琉璃构件则属于硅-铝-镁体系,因此两地胎釉热膨胀系数的匹配关系也不同。     

基于SD法的公园景观综合感知研究——以福州市为例

本文以福州市主要的几个城市公园为研究样本,运用SD法,将声、味环境因素纳入公园景观的感知研究中,就声、味环境因素对评价者公园景观视觉感知的影响进行定量分析,揭示影响规律;并结合因子分析法,进行主要影响因子提取,为人性化的公园景观研究与设计提供参考。结果表明：声、味环境对评价者公园景观的视觉感知产生了明显的影响,且负面因素产生的影响比正面因素更为显著;声、味环境因素对于不同的公园景观视觉效果评价要素和因子的影响有所不同,心理要素和整体要素受影响程度最为显著,其次为环境要素;声、味环境因素影响下的公园景观视觉效果由形式因子、协调因子、空间因子、生态因子、污染因子、特色因子、认同因子和安全因子等8个评价轴构成。     

AN EFFICIENT APPROACH FOR PUSHOVER ANALYSIS OF UNREINFORCED MASONRY (URM) STRUCTURES

This article presents a new method for the calculation of the moment-rotation (M-θ) curves of URM elements using an analytical phenomenogical closed form solution for flexure, combined with a hybrid analytical-statistical model for shear. These are used to define the constitutive law of nonlinear springs located at the areas of lumped inelasticity of an equivalent frame model. The method constitutes an analytical design/assessment tool, to be used by the practicing engineer, for the pushover analysis of URM buildings. The proposed procedure is implemented as a pre-processor to a commercial nonlinear software codes capable of static pushover analysis using the point hinge approach.     

山东香山汉墓出土陶质彩绘文物材质及制作工艺的初步研究

山东青州香山汉墓陪葬坑出土了数量巨大,种类齐全陶质彩绘文物,尤其是陶马和陶俑上的彩绘保存完好,色彩鲜艳,绘画工艺精湛,非常罕见。为了研究汉代彩绘及其制陶工艺等信息,本研究使用拉曼光谱(RS)、带能谱的扫描电镜(SEM-EDX)、偏光显微镜(PLM)、体式显微镜(OM)、X射线荧光光谱(XRF)、X射线衍射(XRD)、热膨胀仪等分析方法,对出土的陶质彩绘文物进行了分析研究。结果表明这批陶质彩绘文物制作工艺是就地取土,与水混合塑型,在900~1000℃烧制陶胎。其彩绘所使用的颜料均为矿物颜料,其中白色为方解石(CaCO3)、红色为赭石(Fe2O3)和朱砂(HgS)、黑色为炭黑(C)、紫色为人造汉紫(BaCuSi2O6),采用胶料调和颜料调涂刷绘制而成。这批文物的制作工艺属于典型的秦汉时期彩绘陶器的制作方法。研究成果可为相关文物的保护提供科学数据。     

Problems of Identification and Quantification in Archaeozoological Analysis,Part II: Presentation of an Alternative Counting Method

Archaeozoologists commonly use Number of Identified SPecimens (NISP) and Minimum Number of Elements (MNE) as measures of anatomical abundances. According to a blind test examining the reproducibility and accuracy of identifications of ungulate remains (Morin et al., Part I, Journal of Archaeological Method and Theory, doi: 10.1007/s10816-016-9300-4), NISP provides estimates of skeletal abundances that are less robust than those based on MNE. However, although results were improved with the latter method, MNE is not free of problems. Here, we show through an analysis of paired NISP-MNE data for 24 classes of elements that MNE is prone to inflate the representation of rare parts (as measured by NISP), a phenomenon more strongly expressed in certain elements than in others. Moreover, some elements show a wide scatter of points, which raises issues of data reproducibility. MNE is also known for being seriously affected by aggregation methods. These fundamental problems severely undermine the value of MNE as a measure of abundance. This article introduces an alternative counting method that avoids many of the weaknesses of MNE. This counting method, called the Number of Distinct Elements (NDE), focuses on the occurrence of pre-determined, invariant landmarks counted on mutually exclusive specimens. Preliminary experimental results suggest that NDE counts are robust predictors of skeletal, and perhaps taxonomic, abundances. Moreover, the NDE approach eliminates the complex and time-consuming task of spreading or drawing specimens to identify fragment overlap. Furthermore, NDE values are additive and easy to calculate. Given these features, the NDE approach represents a compelling alternative to MNE in archaeozoological analysis.     

A Trial PIXE/PIGME analysis of Pre-Islamic Arabian Coinage

Eight previously published (1) pre-Islamic coins minted in Arabia were subjected to non-destructive ion beam analysis by Proton Induced X-Ray (PIXE) and Gamma-Ray Emission (PIGME) at Lucas Heights. The results (2) were interpreted using Principal Components Analysis (PCA). The relative X-ray intensities of fifteen elements, supplemented with additional L alpha lines for two of the elements, were extracted for this analysis. PCA (results appended) was first carried out on the whole dataset where the distinctive high iron and nickel composition of two coins (331 and 335) resulted in their position as outliers. A second analysis of the subset of silver coins showed the compositional similarity between four coins (44, 222, 226, 359) and distinguished two separate outliers. One of these (369) has a high lead and tin content while the other (354) has a greater proportion of elements present as impurities (?) including iron and nickel. The two outliers and the relatively homogenous compositions of the group of four coins suggest that three compositional types of silver coinage are represented in the dataset: 1. a relatively silver-rich group of four coins; 2. silver coins debased with lead; and 3. silver coins debased with iron and nickel.     

Adam Smith's analytic-synthetic method and the ‘system of natural liberty’

In the present paper I shall deal with Adam Smith's application of the analytic-synthetic method, which he considered to be the scientific method par excellence. I shall concentrate on some shortcomings in Smith's arguments and endeavour to explain them as resulting from a particular interpretation of the aforesaid method. The peculiarity of Smith's interpretation was that he omitted the analysis and that he thought the synthesis reflects the composition of an object out of pre-existing elements which are endowed with ‘essential qualities’. I shall then try to show that this methodological concept presupposed the view that society is a compound of independent individuals, i.e. an aggregate of Robinson Crusoes. Finally I shall discuss possible political reasons for this view. On the systematic level, I shall argue that political and scientific partisanship do not necessarily stand in contradiction to objective knowledge, and on the historical level, I shall plead for a ‘Social History of Ideas’.¹     

微量元素示踪古代青铜器铜矿料来源的可行性

目前,微量元素示踪法在青铜器矿料来源研究中的应用不尽人意。为此,模拟熔铸青铜器,对它们的微量元素作多元统计分析,旨在探讨利用微量元素探索古代青铜器铜矿料来源的可行性。分析表明：若舍弃冶炼后富集亍炉渣中的亲石亲铁元素,而仅选取富集于铜料中的亲铜元素及一些凡具有亲铜性,又具有亲铁性元素的成分数据,则通过多元统计分析,能较好地区别不同产地的铜矿料。     

南京大报恩寺塔建筑琉璃构件的科技研究

南京大报恩寺塔是明初重要的皇家琉璃建筑,是代表中国文化的标志性建筑之一,和罗马大斗兽场、比萨斜塔、中国万里长城等一道被称为中世纪世界七大奇迹,具有极高的历史、文化、科技研究价值。本文以南京大报恩寺塔的建筑琉璃构件为研究对象,利用WDXRF、EDXRF、XRD、OM、热膨胀仪、高温测试仪等测试方法研究其胎釉化学组成、烧制温度、结构及物理性能;探讨南京大报恩寺塔建筑琉璃构件胎体原料来源和釉料配方的传承发展关系,揭示其制备工艺技术中所蕴含的科技内涵。     

A study of parametric versus non-parametric methods for predicting paleohabitat from Southeast Asian Bovid astragali

Studies of the African members of the family Bovidae have demonstrated the feasibility of using linear discriminant analysis to predict paleoenvironment based on measurements from postcranial skeletal elements. The use of discriminant analysis depends upon adherence to certain assumptions about the data set. In certain cases, these assumptions are violated, thus reducing the confidence of the results. The research presented here introduces the use of the non-parametric recursive partitioning method as a test of the linear discriminant method for predicting habitat from a collection of modern Bovid astragali from Southeast Asia. This study also provides a critique of the previous African studies. The results indicate that a combination of the parametric and non-parametric methods provides the highest prediction accuracy for Southeast Asian Bovids, though the independent methods do test favorably; thus providing an additional tool for archaeologists and paleoanthropologists in this region.