New experimental data on the distance of sling projectiles

The range of stones cast by slings used in the past is debated. In the Central Andes, slings are asserted to be important weapons of prehispanic war, and have been recovered archaeologically. Rolled river cobbles and stones presumed to be slingstones found at fortified hilltop archaeological sites are presented as evidence that slings were used at these fortifications. Yet sling use has not been adequately tested at hillforts. Experiments conducted in Europe by a novice slinger have attempted to illuminate the range of sling cast stones at ancient hillforts. Data acquired from native slingers is necessary to more accurately assess distances achieved by projectiles launched by slings. We present data from sling experiments carried out in Puno, Perú among Quechua-speaking herders who are experienced slingers. The results demonstrate that a prior model of the maximum theoretical distance of sling cast stones underestimates their range. Results also show significant differences in the use of slings by men and women, and by different age groups. These new data permit a better approximation of warfare that has bearing on our interpretation of fortified sites.     

The reality of reduction experiments and the GIUR: reply to Eren and Sampson

There is no ambiguity in the existing empirical support for a GIUR as a robust predictor of mass lost from flakes through unifacial retouching. We demonstrate why the GIUR is a reliable method for inferring mass loss, in appropriate circumstances, and why it is a more powerful predictor of mass loss than touted competitors. We explain why Eren, M.I., Sampson's, G. [2009. Kuhn's geometric index of unifacial stone tool reduction (GIUR): does it measure missing flake mass? J. Archaeol. Sci.] arguments are faulty and why researchers should use the GIUR in preference to other methods of estimating the extent of unifacial retouch.     

Variation in human bone bioerosion during the Late Eneolithic/Bronze Age in Moravia (Czech Republic): A novel approach to BSE-SEM image quality and quantity assessment

Human bones from Late Eneolithic graves and Bronze Age settlement pits in Moravia (Czech Republic) were studied to reconstruct their post-mortem histories based on the distribution of their microbial destruction. Backscattered electrons in a scanning electron microscope (BSE-SEM) were used for visual assessment of bioerosion. Visual data from the histological analysis were transformed into quantitative data using the Waikato Environment for Knowledge Analysis (WEKA) toolkit. The results show that the presence of bioerosion is different between the two groups of samples. The bones from settlement pits display extensive bioerosion whereas the bones from graves display no or arrested bioerosion. The absence of bioerosion in graves is most probably linked with tomb burials of Corded Ware Culture. Given the tombs are frequently not preserved archaeologically, the state of bone bioerosion may serve as an indicator of their existence.     

Explaining the monopoly in shell-bead production on the Channel Islands: drilling experiments with four lithic raw materials

Significant political and economic developments among the Chumash of southern California were catalyzed in part by the emergence of an intensive, specialist-driven shell-bead industry during the second millennium CE on the Santa Barbara Channel Islands. The production of millions of beads depended in turn on the availability of lithic microdrills of standardized form and materials. Channel Islanders quarried a particular stone type, a blocky Monterey Formation chert, from multiple outcrops situated close to the eastern shores of Santa Cruz Island. Rich archaeological assemblages document the lithic and shell byproducts of these intertwined production systems, each of which endured for several centuries (CE 1150–1819). Islanders invariably chose Island chert for making microdrills: hundreds of thousands of specimens recorded to date are of this material. Furthermore, nearly every microlith in all of Chumash territory (post CE 1150) was produced on the islands; the large populations on the mainland did not participate in microlith making or bead making after CE 1150–1200. We argue that this pattern had its roots not only in the patchiness of key resources and shifting regional social relationships, but also in the physical properties of available raw materials. Here we experimentally assess the properties of Santa Cruz Island chert alongside three important mainland raw materials—Grimes Canyon fused shale, Coso obsidian, and Vandenberg chert—that potentially could have been tapped to make microliths. We test the proposition that Island chert outperforms other lithic materials in drilling efficiency and drill use life. Our experimental results from 108 drilling trials reveal sharp distinctions in performance characteristics across the four materials. We infer that the process by which Islanders became the more-or-less exclusive manufacturers of shell-bead currency in southern California was facilitated by both the efficacy and physical properties of the Island cherts and the propitious locations of the outcrops.     

New experimental evidence on the relation between percussion flaking and flake variation

Controlled experiments in percussion flaking allowed for objective analysis of relationships between variables of flake production and those variables which are attributes of the final result. The independent variables, those controlled by the flintknapper in the production of stone tools, include force and angle of blow, platform thickness and exterior platform angle. The dependent variables are those attributes of the flakes which are often used in current lithic analyses and include interior platform angle, length, thickness and flake termination. The results clearly show that exterior platform angle is highly significant for understanding many aspects of flake production. These and other relationships between the independent and dependent variables are also discussed.     

Addressing data comparability in the creation of combined data sets of bioapatite carbon and oxygen isotopic compositions

Before amalgamating published isotope data, comparability should be demonstrated. This paper compares carbon and oxygen isotopic compositions of 30 enamel samples measured by two laboratories. The aims were to see what, if any, isotopic variation was observed, to determine the causes as needed and to correct if possible. Bioapatite was acidified at 90°C in 2006 and at 26°C in 2017, while δ values were corrected via one‐point normalization in 2006 and by two‐point normalization in 2017. One case (of the 30) produced different δ values between the analysis dates, suggesting contamination. Repeated carbon isotope ratio measurements were not meaningfully different. Repeated oxygen isotope ratio measurements were significantly different, even following correction for acid‐carbonate fractionation at different temperatures and the renormalization of 2017 δ values using one point; however, differences were not meaningful for interpretations. Results were used to calculate real interpretative differences (RIDs) for comparing enamel bioapatite as 0.6‰ for δ¹³C values and as 1.6‰ for δ¹⁸O values.     

Shooting out the slate: working with flaked arrowheads made on thin-layered rocks

Although there are many archaeological and ethnographic evidences for the use of slate and similar rocks for flaking purpose, they raised little interest among specialists, leading to a general ignorance of specific problems associated with these raw materials. Starting from the study of several Neolithic and Chalcolithic slate collections of the Western Iberia, the mechanical properties of slate and its impact on knapping process has been defined; subsequently, manufacturing and use of slate and phyllite projectiles have been undertaken. The results show that the ease with which these materials break into sheets of uniform thickness and morphology would provide an ideal basis for a fast and easy manufacture of arrowheads. In addition, these projectiles have shown a penetration capability and resistance statistically equivalent to those made on more standard materials (i.e. chalcedony or rock crystal). Therefore, slate and other rocks with a high degree of fissility would have been very attractive to prehistoric knappers endeavouring to make arrowheads.     

Tracking changes in bone fracture morphology over time: environment, taphonomy, and the archaeological record

Zooarchaeologists have often employed studies of bone fracture morphology as a means of understanding past human cultural activity, and various methodological approaches have been developed for analyzing archaeological broken bone assemblages. It is widely understood that bones degrade over time, however, few studies have attempted to define and quantify the rate at which bones degrade and fracture morphologies change. This study examines degradation in frozen bones (−20 °C) and bones exposed to hot (40 °C) dry conditions. These two simulated environmental conditions represent extreme real-world climates, and allow for an actualistic understanding of the rates of degradation that bones experience in nature. When frozen, bones degrade slowly but significantly, and demonstrate measurable differences in samples frozen for 1, 10, 20, 40, and 60 weeks. In hot, dry conditions, bones degrade very quickly, and demonstrate measurable differences after 1, 3, 7, 14, and 21 days. These data allow for a more detailed understanding of the relationship between the cultural and natural processes that result in bone fracture, and the time period during which bones can be expected to maintain fresh fracture characteristics. This research also has implications for understanding human subsistence and survival strategies and for interpreting the archaeological record.     

Slag inclusions in iron objects and the quest for provenance: an experiment and a case study

Slag inclusions are found within most archaeological bloomery iron artefacts and are remainders of slag created during the smelting and smithing processes. Although they are widely believed to provide data with the potential for provenancing iron artefacts, previous slag inclusion studies have mostly proven inconclusive. The main aim of the work reported here is to analyse experimental smelting and smithing assemblages (including ore, furnace lining, fuel and slag), to compare these to slag inclusions in the resulting bloom and worked objects, and then explore the relationships between ore, slag and slag inclusions. This study has revealed that the composition of slag inclusions most closely relates to the smelting slag produced, whereas provenance to a specific ore would be difficult due to the chemical variability derived from furnace lining, fuel and any fluxes used. Some compounds in the slag inclusions are particularly affected during smithing of the artefact, i.e. those present in the sand flux and fuel used. However, trends are observed in the K₂O/MgO, MnO/SiO₂, Al₂O₃/SiO₂, Al₂O₃/MgO, Al₂O₃/K₂O and Al₂O₃/CaO ratios that allow comparison between slag inclusions and smelting slag in these experiments, and may therefore be used during other provenancing attempts. The knowledge gained from the experimental assemblages was subsequently applied to an archaeological case study, examining objects from the 900 Cal BC smithing site of Tel Beth-Shemesh, Israel and the 930 Cal BC smelting site of Tell Hammeh, Jordan. The analyses suggest that none of the artefacts examined derived from the Hammeh smelting system.     

The application and misapplication of mass analysis in lithic debitage studies

The technique of debitage mass analysis based upon size grades of debitage populations is shown to be prone to errors when making interpretations about the kind of tool produced or the kind of lithic reduction technology used. Significant sources of error may originate from differences in individual flintknapping styles and techniques, raw material size and shape variants, and mixing of debitage from more than one reduction episode. These sources of error render debitage Mass Analysis ineffective for determining the kind of stone tool reduction activities practiced at excavated sites. Mass Analysis may be effective for determining artifact reduction sequences if it is used on debitage from a single reduction episode or part of a reduction episode. However, it is shown that Mass Analysis when used for assessing reduction sequence information, must also control for the effects of raw material variability, assemblage mixing, and flintknapping styles.     

Hunting lesions caused by osseous projectile points: experimental results and archaeological implications

The identification of projectile impact traces on archaeological faunal remains is an important issue for understanding prehistoric hunting behavior, especially in the Paleolithic and Mesolithic. From the beginning of the Upper Paleolithic in Europe, and earlier in Africa, projectiles tipped with osseous points were of great importance for subsistence; but thus far, no specific experimental reference has been developed to help identify the traces left by these points. In 2003 and 2004 two series of projectile experiments with antler points of Magdalenian design were organized, involving two ox calves and two female fallow deer as targets for bow and spearthrower shooting. The subsequent study demonstrates that positive identifications of impact traces left by osseous points can be made. The observation of 127 impact traces allowed us to distinguish three main types of traces: notches, punctures and perforations. The relationships between the nature of the impact traces and the (i) target species, (ii) characteristics of the impacted bones, and (iii) type of weapon are presented. Synthesized results are then discussed within the context of the European Upper Paleolithic and Mesolithic.     

Asphaltum hafting and projectile point durability: an experimental comparison of three hafting methods

The design of a projectile delivery system often plays a critical role in the durability and breakage patterns associated with spent projectile points. This paper presents the results of an experimental project designed to examine projectile point durability and breakage patterns between three different hafting methods. Specifically, we compare two asphaltum hafting techniques drawn from archaeological and ethnohistoric accounts from the Central Valley of California with a more stereotypical cross-hatched sinew hafting system. Our results suggest a small yet statistically significant increase in durability among asphaltum hafted points, opening the door to future research on these ethnohistorically documented hafting techniques.     

东北亚地区经济技术合作中的旅游业

旅游业的先导作用、文化效应和经济效应决定了它在东北亚地区经济技术合作中的地位,本文分析了东北亚地区旅游业的发展基础与协作潜力,就东北亚地区旅游业发展战略与中国延边地区的相应抉择进行了探讨。     

Toolstone constraints on knapping skill: Levallois reduction with two different raw materials

Lithic raw material constraints are widely assumed to be a determining factor of flaked stone tool morphology, but this assumption remains largely untested. We conducted a controlled experiment to determine whether a knapper’s growing replication skills would be hindered if the toolstone used was switched from large flakes of an easily worked chert to nodules of less tractable one. Two batches of Preferential Levallois cores were knapped, an earlier series made from standardised large flakes of sediments dominated by chalcedonic quartz followed by a more challenging one using variably-shaped, cortical nodules of microcrystaline quartz that varies in the completeness of quartz replacement of calcite and dolomite. Skill level markers were designed to measure the knapper’s ability to achieve a series of set goals. These were quantified and subjected to statistical testing. In all but one test, significant increases in skill could be detected from the earlier to the later batch of reductions, despite the drop in toolstone quality. Significant improvements in the consistency of the knapper’s output could also be detected. However, the switch to a more challenging, nodular chert did require extra shaping, which resulted in more waste. This masked visible progress towards producing a less costly core. Overall, our results do not support the assumed primacy of toolstone constraints over other factors in influencing the morphology of flaked stone tools.     

Gazelle bone marrow yields and Epipalaeolithic carcass exploitation strategies in the southern Levant

We measure the bone marrow yields of mountain gazelle (Gazella gazella) carcasses to reconstruct gazelle exploitation strategies during the Epipalaeolithic periods in the southern Levant. We present experimentally derived data on the bone marrow content of seven fresh gazelle carcasses, determine the range of marrow yields among individuals of different sexes and seasons of death, and compare the new data to gazelle skeletal element abundances from five Epipalaeolithic assemblages from Israel. We found extensive variation in marrow fat content among individual gazelles. Animals with the highest marrow yields were killed in the spring while animals killed in the early autumn had lower fat contents. Nevertheless, our results suggest that gazelle marrow provided a reliable, albeit small fat resource for prehistoric foragers in all seasons. Strong relationships between bone fragmentation and marrow content demonstrate that Epipalaeolithic people preferentially processed bones with high marrow yields.     

Multivariate visualization and analysis of photomapped artifact scatters

Simultaneous analysis of relationships between multiple artifact classes is required for characterization of many types of activity areas. This paper illustrates improved forms of multivariate visualization, spatial analysis and integration of experimental results that are possible with GIS based photomapping. Techniques are demonstrated through analysis of a hearth associated artifact scatter exposed during excavations of a Late Archaic pithouse at Jiskairumoko, Peru. A multivariate density raster is created and additive color visualization is used for simultaneous display of three artifact distributions. Performing unconstrained clustering in a GIS, space is classified by simultaneous relative density relationships between multiple object types.     

Experimental examination of animal trampling effects on artifact movement in dry and water saturated substrates: a test case from South India

This paper presents the motivation, procedures, and results of an experiment that examines short episodes of animal trampling in dry and water saturated substrates in South India. While horizontal artifact displacement was similar to that modeled by other trampling experiments, vertical artifact displacement in water saturated substrates was greater than any reported experiment to date. The toolstone used in this experiment, a silicious limestone, exhibited minimal damage after trampling. Artifact inclination patterning appeared to be a potentially diagnostic middle-range marker of trampling in water saturated substrates. Given the abundant number of Paleolithic sites that are located on flat, open surfaces near water-bodies, or experience monsoonal climatic regimes, we propose that future excavations should measure artifact inclination on a regular basis.     

Vein quartz in lithic traditions: an analysis based on experimental archaeology

Worldwide, vein quartz was a commonly used raw material for stone tools but this material has proved difficult for archaeologists to analyse because many quartz assemblages appear to be comprised of amorphous pieces, not easily recognised as humanly modified or forming ‘tools’. This paper discusses the analysis of the debitage – focusing on the debitage fragmentation rate, the debitage, break, and fragment types, and the quantitative analysis of the complete flakes – resulting from experimental knapping of quartz, which formed part of a project which investigated the use of quartz in Irish prehistoric lithic traditions. The results have highlighted the complexity involved in analysing quartz assemblages, and the significant differences between the debitage products of quartz and chert knapping assemblages. While bipolar knapping is generally easy to differentiate from direct percussion, it is harder to differentiate between soft and hard hammer percussion.     

Plant processing strategies and their affect upon starch grain survival when rendering Peltandra virginica (L.) Kunth,Araceae edible

There is a long history of human interaction with plants of the Aroideae subfamily (Araceae). Despite these plants' chemical defenses against animal and vegetal predation, humans have targeted their starchy corms, tubers and rhizomes for dietary purposes. In the Eastern Woodlands of North America, early Europeans described the Native population as utilizing the highly acridic Peltandra virginica (arrow arum) for subsistence needs. In order to render this resource edible, however, the acridic principle first needs to be eliminated. Our study investigates the affect these processing activities have on the integrity of arrow arum starch grains. Findings from this study demonstrate that environmental variables specific to individual processing procedures may be more influential on starch grain survival than simply the temperatures reached during cooking.