Core Use-Life Distributions in Lithic Assemblages as a Means for Reconstructing Behavioral Patterns

Artifacts with varying use-lives have different discard rates and hence are represented unequally among archaeological assemblages. As such, the ability to gauge the use-lives of artifacts is important for understanding the formation of archaeological assemblage variability. In lithic artifacts, use-life can be expressed as the extraction of utility, or work potential, from existing stone volume. Using experimental data and generalized linear modeling, this study develops models of artifact use-life on cores in the form of reduction intensity. We then apply these models to two archaeological case studies to (a) reconstruct the reduction intensities of archaeological cores and (b) investigate the survivorship curves of these archaeological cores across the reduction continuum using the Weibull function. Results indicate variation in core reduction and maintenance with respect to raw material properties and place use history and implicate evolutionary differences between Early Stone Age hominins and Holocene modern humans.     

Picking up The Pieces: Reconstructing Lithic Production Strategies at a Late Holocene Obsidian Quarry in Southern Kenya

Use of particular lithic quarries by different cultural groups is a prominent feature of the Pastoral Neolithic period in southern Kenya (ca. 3200–1400 b.p.), when lifeways based on herding domesticated livestock spread through eastern Africa. Here, I present lithic attributes from the recently excavated Elmenteitan Obsidian Quarry assemblage to examine the site’s role in an obsidian distribution network spanning southwestern Kenya. Evidence from the quarry reflects intensive preparation of blade cores and blade reduction. Changes in platform size, flake scar orientation, curvature, and cortical rates through the reduction sequence permit a preliminary reconstruction of Elmenteitan core production strategies that can serve as a basis for regional comparative studies. Uniformity in blade core design and reduction strategy suggests highly organized use of the quarry and supports its role as a production center for regional exchange. Results inform regional debates and contribute to a growing literature on the potential of quarry archaeology.     

An estimator for bidirectional (naviform) blade productivity in the Near Eastern Pre-Pottery Neolithic B

A method is presented for calculating the blade productivity of bidirectional (naviform) blade cores, a hallmark of Near Eastern Pre-Pottery Neolithic B (PPNB) chipped stone tool assemblages. This approach involves estimating the volume of the core that furnished serial blades, together with the mean volume of a typical targeted blade blank. Simple computation of the volume of a wedge in both instances provides an estimate of the number of targeted blades that were produced in an average single reduction sequence. The method is checked against two replicated bidirectional blade reduction sequences, and a refitted bidirectional blade core from the site of Kfar HaHoresh, Israel. Finally, a case study from Kfar HaHoresh is presented in order to illustrate the application of the method, which may have ramifications concerning the evaluation of incipient craft specialization in the region.     

Measuring core reduction using 3D flake scar density: a test case of changing core reduction at Klasies River Mouth,South Africa

A new core reduction index is presented, calculated as the ratio of flake scar number to 3D surface area (SDI). The index is tested experimentally on five types of core (blade, discoid, Levallois, biface and multiplatform cores) and then applied to the core assemblages from five sub-stages of the Middle Stone Age at Klasies River Mouth, South Africa. Preliminary results indicate that the SDI possesses the desirable attributes of a successful reduction index and is a significant improvement on traditional proxy measures of core reduction. The results of the archaeological case study confirm previous untested observations that cores from the Howiesons Poort and MSAIII sub-stages are more heavily reduced than preceding and following stages, and that local and exotic raw materials as well as different types of cores are all more heavily reduced during these periods. The SDI fills a significant lacuna in available core reduction measures.     

What novice knappers have to learn to become expert stone toolmakers

The aim of this paper was to determine what technical gestures must be learned in order to produce stone tools. To identify these gestures, we compared the performance of expert knappers and complete novices. We hypothesised that the differences between novices and experts would indicate which technical gestures experts had learned to successfully produce stone tools. Participants were video recorded while attempting to produce a crude handaxe. The recordings were analysed according to ethological methods used to study animal and human behaviour. The knapping performance of each participant was segmented and scored into units in order to identify the technical gestures being used. The results showed considerable differences between experts and novices in three technical gestures: the type of percussion support, the position of the blank and the angle of blow. Therefore, these three technical gestures appear to be crucial in learning to knap stone at the level of bifacial stone toolmakers. By studying how modern knappers gradually master these three technical gestures we may begin to understand how stone knapping is acquired, how bifacial stone tools emerged and what cognitive challenges early handaxe makers had to face.     

Levallois economics: an examination of ‘waste’ production in experimentally produced Levallois reduction sequences

Mathematical modelling has suggested that Levallois core morphology represents a reduction strategy driven by economic considerations; particularly the minimization of ‘waste’ while aiming to maximize cutting edge length of flakes obtained from cores of a given size. Such models are elegant in that they facilitate formal modelling of economic considerations that potentially motivate patterns seen in prehistoric data. However, the abstract nature of such models means that they do not take full account of all the practical difficulties and material challenges involved in reproducing Levallois-style reductions in stone. In particular, such models have only examined nodule morphology in two-dimensions, and did not take account of the fact that in the case of classic (lineal) Levallois reduction, core surfaces must be re-prepared between successive stages of flake removal. Hence, the potential economic implications of these factors are currently unknown, potentially undermining the significance of models that assume specific economic conditions. Here, we undertook to examine these factors using a series of experimentally produced Levallois reduction sequences. A total of 3957 flaking events were considered in our analyses, and we used six specific measures of economy to examine Levallois reduction across successive phases. Our analyses found that key assumptions of mathematical models suggesting that Levallois core morphology was driven by economic considerations (i.e. conservation of raw material when attempting to remove flakes with long cutting edges) can be upheld under the practical challenges of replicating Levallois-style reduction in stone. In supporting the notion that Levallois reduction has advantageous economic properties, our results emphasize the importance of considering why Levallois reduction did not emerge earlier in the archaeological record, and indeed, why even during the later Pleistocene the temporal and geographic distribution of Levallois technology varies. Our results also re-emphasize the value of formally modelling lithic reduction strategies in specific economic terms.     

江苏南部旧石器调查报告

1999～2001年间在江苏南部分别调查了句容、金坛、高淳等6市县旧石器地点16处,采集100余件石制品,类型有石核、石锤、砍砸器、镐、石球、尖刃器等。初步研究表明,石制品均出自下蜀黄土中,地质时代大约为中更新世中晚期,即旧石器时代早期。石器工业的性质与邻近的安徽水阳江流域旧石器十分接近,属于中国南方砾石石器——砍砸器传统。     

Prepared core reduction at the site of Kudu Koppie in northern South Africa: temporal patterns across the Earlier and Middle Stone Age boundary

Kudu Koppie is a stratified late Earlier Stone Age and Middle Stone Age archaeological site located in the northern Limpopo Province of South Africa. The prepared core reduction strategies are described and temporal trends across the ESA–MSA boundary are presented. The prepared cores and endproducts of Kudu Koppie suggest that both the late ESA and MSA toolmakers employed the Levallois Volumetric Concept, but they often exploited a nodule's natural convexities and form. The MSA toolmakers used a greater variety of prepared core methods and more intensively exploited cryptocrystalline and microcrystalline nodules, the scarcity of which may have resulted in a more “formalized” application of the Levallois Volumetric Concept. These observations are considered within the context of human behavioural evolution.     

Experimental production of bending and radial flake fractures and implications for lithic technologies

Bend and radially broken flake tools have been identified in Paleolithic and Paleoindian assemblages, and their presence raises important questions. Were these breaks intentionally produced to serve as tool edges or were broken flakes simply scavenged? More importantly, can we distinguish between intentionally produced breaks and those produced incidentally? Experimental archaeology can help answer these questions. In this paper, three sets of experimentally produced bend and radial flake breaks were compared. Flakes were intentionally broken by percussion, and these breaks were compared to those produced during bifacial core reduction and by flake trampling. The presence of point of impact markers, near ninety degree break angles, and an assemblage with high percentages of bend and radial breaks distinguish intentional fracture from incidental fractures produced during bifacial reduction. High percentages of radial breaks distinguish intentional fracture from trampling. Finally, it may not be possible to identify intentional breaks in a bifacial reduction assemblage severely affected by flake-on-flake trampling.     

Mobility patterns and core technologies in the Middle Paleolithic of the Levant

Mobility is thought to be a significant source of Middle Paleolithic archaeological variability in the East Mediterranean Levant. However, models of Levantine Middle Paleolithic land-use have historically been based on rare and taphonomically sensitive evidence from a limited number of sites. Because lithic artifacts are the most ubiquitous archaeological remains available to the prehistorian, relationships between stone tool technology and mobility patterns can improve tests of hypotheses about prehistoric land-use strategies. This paper examines variation in Middle Paleolithic mobility strategies in the Levant from the perspective of core technology. A model linking expedient core reduction techniques and decreased mobility is adapted from one developed for late prehistoric contexts in the New World. Incorporating core data from numerous Levantine Middle Paleolithic assemblages, this study tests hypotheses about diachronic change, synchronic geographic variation, and possible hominin behavioral differences in mobility strategies.     

Oldowan reduction sequences: methodological considerations

Transport of resources is a major feature of Oldowan hominin technological adaptations. Comparisons between different Oldowan localities often employ measures of transport that are based on artefact attributes as proxies for the intensity of raw material utilization. The Technological Flake Category system [Toth, N., 1985. Oldowan reassessed: a close look at early stone artifacts, Journal of Archaeological Science 12, pp. 101–120] has been used extensively to infer the relative intensity of lithic reduction within Oldowan assemblages. Here we use a large experimental sample to test the relationship between a flake's stage in a reduction sequence and various quantitative attributes. We demonstrate how many previously described attributes are affected by initial core size. We then develop a multiple linear regression model that incorporates several variables to predict the placement of a flake within a generalized reduction sequence. The model is then applied to Oldowan assemblages in the Koobi Fora Formation which explores the strengths and weaknesses of different methods of investigating reduction intensity on an assemblage level.     

An Index of Invasiveness for the Measurement of Unifacial and Bifacial Retouch: A Theoretical,Experimental and Archaeological Verification

Archaeologists are increasingly in need of quantitative measures of stone artefact retouch. Existing techniques fail to provide a generic measure of retouching for all chipped stone artefacts. A fast and reliable index is proposed which measures retouch in terms of the invasiveness of flake scars on the surfaces of complete stone artefacts. Unlike other measures, the index of invasiveness is well suited to the analysis of bifacially worked artefacts such as bifacial points and bifaces. Experimental tests demonstrate a strong correlation between the index and measures of reduction based on diminishing flake weight and numbers of retouch blows. Inter-observer reliability is also demonstrated through the use of a blind test. Limitations of the method are discussed, although potential techniques for surmounting problems are identified. An archaeological application of the index demonstrates the utility of the method in the context of regional assemblage variability in northern Australia.     

New Excavations at Border Cave,KwaZulu-Natal,South Africa

New excavations at Border Cave use high-resolution techniques, including FT-IR, for sediment samples and thin sections of micromorphology blocks from stratigraphy. These show that sediments have different moisture regimes, both spatially and chronologically. The site preserves desiccated grass bedding in multiple layers and they, along with seeds, rhizomes, and charcoal, provide a profile of palaeo-vegetation through time. A bushveld vegetation community is implied before 100,000 years ago. The density of lithics varies considerably through time, with high frequencies occurring before 100,000 years ago where a putative MSA 1/Pietersburg Industry was recovered. The highest percentage frequencies of blades and blade fragments were found here. In Members 1 BS and 1 WA, called Early Later Stone Age by Beaumont, we recovered large flakes from multifacial cores. Local rhyolite was the most common rock used for making stone tools, but siliceous minerals were popular in the upper members.     

Clovis,Folsom, and Midland components at the Debra L. Friedkin site,Texas: context,chronology, and assemblages

The archaeological transition from Clovis to Folsom and Midland in the North American Great Plains coincides with the end of the Pleistocene and onset of the Younger Dryas. Comparisons exploring the adaptive changes that took place during this period frequently employ regional-scale approaches. The focus on regional-scale analyses largely results from the dearth of sites repeatedly visited by multiple early Paleoindian groups. However, regional-scale comparisons have the potential to overlook smaller-scale differences. The Debra L. Friedkin site, Texas offers an opportunity to study Midland, Folsom, and Clovis technology and site-use at a single site. This paper presents the context and chronology of the Midland, Folsom, and Clovis assemblages and a site-scale analysis of lithics from the Friedkin site. It is argued that point production and late-stage reduction were primary activities, and the use of bifacial cores for flake tools was important throughout these occupation periods. Site use at Friedkin differs from early Paleoindian occupation at the nearby Gault site and expands our understanding of settlement and technological organization in the region.     

A 3D morphometric analysis of surface geometry in Levallois cores: patterns of stability and variability across regions and their implications

Levallois cores and products were manufactured by hominin populations distributed across wide regions of Africa and Eurasia. Levallois technology remains an important focus for research in Palaeolithic archaeology, yet quantitative morphological comparisons of Levallois core morphology from different regions remain rare. Here, utilizing Levallois cores from Africa, the Near East, Europe, and the Indian subcontinent, patterns of morphological variability in the shape of the Levallois flaking surface and core outline (margin) shape were examined for patterns of variability and stability across regions using 3D geometric morphometrics. The multivariate statistical shape analyses undertaken revealed a clear pattern: that is, the greatest levels of shape variability in Levallois cores is evident in the form of their outline (planform) shape. Conversely, the geometrical relationship between the margin of the Levallois cores and their topological surface morphology was relatively uniform. This pattern of variability was evident in terms of variation both across regions and between cores from the same locality. These results indicate that the outline form of such cores was a less important variable than the geometric/topological properties of the surface morphology and, in particular, the relationship between the margin of the core and those variables. These results have implications for why it has been reported that replicating such cores in modern experiments is a particularly difficult task. The specific interrelationship between the geometric properties of the core and the core margin provide further evidence that Levallois core technology would be unlikely to emerge from the context of opportunistic migrating platform reduction strategies (such as those seen in many Mode 1 industries). If, as is widely suggested, Levallois cores were deliberate products in Pleistocene contexts, these results also hint that relatively sophisticated means of social transmission (i.e. teaching) may have been required to sustain their production over time and space.     

Sickle blade life-history and the transition to agriculture: an early Neolithic case study from Southwest Asia

In Southwest Asia, sickle blades first appear early in the sequence of the transition to agriculture. In the past, detailed qualitative research on silica bearing blade stone tools focus on the characterization of use-wear traces such as polish types and accrual rates. In this paper we approach the study of sickle blades slightly different, choosing to examine tool life-history by developing a method to quantitatively estimate harvesting intensity. The method centers on an experiment of cutting cereal stalks and measuring stone blade edge thickness under a scanning electron microscope as a proxy for cutting time. We end with regressing the experimental results to provide an estimation of how intensively archaeological sickle blades recovered from the site of Dhra’, Jordan were used for harvesting. The results, while preliminary, enable an initial interpretation of sickle blades as important tools with long use-life histories during the early Neolithic in the Southern Levant.     

Structuring the Late Stone Age of Southeastern Arabia

This paper treats the classification of a number of facies in the Late Stone Age of Southeastern Arabia. The basis for this classification is a selection of substantial find complexes of chipped stone artifacts from sites located along the coast of Oman. Human occupation in the region dates to the beginning of the Holocene, but insufficient material is available for the first quarter of the post-Pleistocene era. At the beginning of the second quarter of the Holocene, we find a relatively undifferentiated stone tool-using facies (Wadi-Wutayya-Facies) which was appar- ently contemporary with the Qatar B blade-arrowhead horizon in the interior of the Oman peninsula. Early in the 5th millennium BC, the Wadi-Wutayya-Facies was superseded by the Saruq-Facies which can be seen as a local variant of the “Arabian bifacial tradition”. The high point in the Late Stone Age occupation of the coast was reached early in the 4th millennium BC when various local facies can be distinguished. These include the Ra's-al-Hamra-Facies in the central coastal zone around Muscat and the Bir-Bira-Facies in the area around Sur. This phase, which was characterized particularly by the formation of shell middens, seems to have lasted only about 500 years. An essentially aceramic occupation on the coast of the Gulf of Oman, called the Bandar-Jissa-Facies, represents the final phase in the classification of Late Stone Age occupation outlined here. This facies was characterized by the use of a simple stone tool industry alongside of metal artifacts, and was contemporary with the Early Bronze age occupation of the southern and southwestern flanks of the Oman mountains. Information on categories of finds other than chipped stone, particularly those made of groundstone and shell, as well as observations on the economic and environmental history of the periods discussed, complement the study of the stone tool industries and form the basis for an outline of the history of Southeastern Arabia in the second quarter of the post-glacial era.     

Technology based evolution? A biometric test of the effects of handsize versus tool form on efficiency in an experimental cutting task

The use of stone cutting tools opened a novel adaptive niche for hominins. Hence, it has been hypothesised that biomechanical adaptations evolved to maximise efficiency when using such tools. Here, we test experimentally whether biometric variation influences the efficiency of simple cutting tools (n = 60 participants). Grip strength and handsize were measured in each participant. 30 participants used flint flakes, while the other 30 used small (unhafted) steel blades. Variations in basic parameters of tool form (length, width, thickness, cutting edge length) were recorded for the 30 flint flakes. It was ensured that mean handsize and strength in each participant group were not significantly different to investigate the effect of tool variation. The experimental task required cutting through a 10 mm-diameter hessian rope. Cutting efficiency was measured using both ‘Number of cutting strokes required’ and ‘Total time taken’. Results show that both efficiency measures were significantly correlated with handsize using all 60 participants. However, no significant differences were found between the flake and blade groups in terms of mean efficiency. Nor was any significant relationship found between tool form parameters and efficiency in the flint flake group. We stress that our results do not imply that tool form has no impact on tool efficiency, but rather that – all other things being equal – biometric variation has a statistically significant influence on efficiency variation when using simple cutting tools. These results demonstrate that biomechanical parameters related directly to efficiency of use, may plausibly have been subject to selection in the earliest stone tool-using hominins.