The Hogeye Clovis cache,Texas: quantifying lithic reduction signatures

The Hogeye Clovis cache is comprised of 52 late-stage bifaces, finished points, and knife/cores cached in central Texas. Because these artifacts were all likely made and cached approximately 13,000 years ago by one or a handful of knappers belonging to a single band with a shared Clovis cultural template, Hogeye provides a rare opportunity to investigate Clovis lithic reduction signatures. This paper builds on previous analyses and presents new methods for quantifying Clovis biface production signatures, including serial flaking and the timing of last overshot flaking. The results show that the Hogeye cache bifaces technologically and morphologically differ from other regional Clovis biface reduction signatures. Additional data is needed to determine whether these differences reflect individual knapping preferences or regional cultural signatures. The methods used and developed here are not Clovis-specific and could be modified and combined with other analytical techniques to identify reduction signatures in biface assemblages from other times and places.     

A biface and blade core efficiency experiment: implications for Early Paleoindian technological organization

Early Paleoindians often are described as highly mobile hunter–gatherers who employed lithic technologies designed to minimize stone transport costs. We experimentally reduced blade and bifacial cores and found both reduction strategies to be equally efficient for the production of useable flake blanks. Further, when compared to similar core reduction experiments, the results of this study showed no significant differences in core efficiency between bifacial, prismatic blade, and wedge-shaped blade core reduction. Biface and blade cores with initial weights greater than 1000 g produced useable flakes as efficiently as informal cores. However, bifacial and blade core efficiency decreased with initial core weight. When considered in terms of Early Paleoindian technological organization, differences in core efficiencies suggest that Folsom groups employed core reduction strategies designed to minimize stone transport costs, but Clovis groups did not.     

Clovis,Folsom, and Midland components at the Debra L. Friedkin site,Texas: context,chronology, and assemblages

The archaeological transition from Clovis to Folsom and Midland in the North American Great Plains coincides with the end of the Pleistocene and onset of the Younger Dryas. Comparisons exploring the adaptive changes that took place during this period frequently employ regional-scale approaches. The focus on regional-scale analyses largely results from the dearth of sites repeatedly visited by multiple early Paleoindian groups. However, regional-scale comparisons have the potential to overlook smaller-scale differences. The Debra L. Friedkin site, Texas offers an opportunity to study Midland, Folsom, and Clovis technology and site-use at a single site. This paper presents the context and chronology of the Midland, Folsom, and Clovis assemblages and a site-scale analysis of lithics from the Friedkin site. It is argued that point production and late-stage reduction were primary activities, and the use of bifacial cores for flake tools was important throughout these occupation periods. Site use at Friedkin differs from early Paleoindian occupation at the nearby Gault site and expands our understanding of settlement and technological organization in the region.     

Variability in bifacial technology at Elandsfontein,Western cape,South Africa: a geometric morphometric approach

This study applies a new three-dimensional measurement technique to determine the major source of variation in the Acheulian bifacial tool collection from the Middle Pleistocene site of Elandsfontein, South Africa. This three-dimensional technique is compared with conventional two-dimensional methods to investigate which methods capture morphological variation in the assemblage most comprehensively. Additionally, a set of experimentally produced bifacial tools are incorporated into the analyses to isolate the behavioral pattern underpinning identified variation in the archaeological assemblage. The interpretative breadth of current models explaining morphological variation in bifacial tools is then tested against the pattern identified in the Elandsfontein assemblage. Variation appears to be related to the consistent application of a specific reduction strategy associated with the early stages of bifacial tool manufacture. The intensity with which this strategy was applied seems to have been mediated by the availability of raw material that was suitable for the production of large bifacial tools.     

The technology of Stone Age colonization: an empirical,regional-scale examination of Clovis unifacial stone tool reduction,allometry, and edge angle from the North American Lower Great Lakes region

There is now broad consensus that the appearance of Clovis in Northeastern North America (Great Lakes, New England) represents a colonization pulse into recently deglaciated landscapes. Due to the increased resource uncertainty that comes with colonizing unfamiliar landscapes, it was hypothesized that the majority tool component of Clovis assemblages, unifacial stone tools, should have been knapped on tool blanks possessing the design properties of longevity and functional flexibility to facilitate exploration mobility and guard against the absence of toolstone sources in the new landscape. These properties are optimized by large, flat flakes, possessing large surface area relative to flake thickness. Since discarded and, at times, exhausted unifacial stone tools do not preserve the original dimensions of the blank upon which they were created – necessary items for a true test of blank morphology selection – this study presents a set of predictions for inferring whether Clovis unifacial stone tool blanks were selected for the properties of longevity and functional flexibility based on evidence that Clovis people actually capitalized on those properties. Due to the nature of Clovis unifacial stone tools, tool size was of necessity used as a proxy for tool reduction, on the grounds that smaller tools are more likely to have been resharpened than larger tools, at least in the case of unifacial flake tools. The results showed that less resharpened tools possessed flatter, less spherical shapes than the more resharpened tools, which possessed more globular, spherical shapes, suggesting Clovis foragers exploited the retouch potential afforded by the larger, flatter blanks. Edge angles showed no relationship with tool reduction, suggesting that Clovis foragers exploited the functional flexibility afforded by flatter blanks by adjusting the edge angle to be either higher or lower as needed. These results are consistent with the notion that human colonizers, who did not know the abundance or location of stone outcrops prior to settling an unfamiliar territory, not only “geared up” before leaving a stone source, but geared up as efficiently as possible by carefully selecting the blanks they chose to carry. Broader implications for such careful unifacial stone tool blank selection are discussed.     

Flake scar patterns of Clovis points analyzed with a new digital morphometrics approach: evidence for direct transmission of technological knowledge across early North America

Clovis points are the principal diagnostic artifacts of a Clovis complex that spread across North America between ca. 11,050–10,800 radiocarbon years before present. Clovis may be the best documented Paleoamerican culture in North America, but much remains to be learned about the movement and interactions of Clovis peoples. Similarities among Clovis points from geographically diverse locations have led some researchers to suggest that a uniform projectile point technology existed across North America during Clovis times. Others have rejected this idea, proposing local and independent technological adaptations to different regional environments. To investigate these ideas, we used digital morphometrics to analyze 50 Clovis points from nine different contexts. First, 3D surface models of the points were created with a portable laser scanner. Next, these models were digitally cross-sectioned through both faces, yielding two-dimensional isoheight contours of flake scar patterns that reflect the original reduction techniques used to shape the projectile points. In the final step, the contours were transformed with elliptic Fourier analysis into Fourier coefficient series, and patterns of variation and symmetry were explored with principal components analysis. When compared to modern Clovis point replicas made by an expert knapper, the flake scar contours of the ancient Clovis points showed little morphological variation and a large degree of bifacial symmetry. Our results support the existence of a widespread standardized “Clovis” knapping technique, most likely transmitted through direct interaction between knappers from different groups.     

Geoarchaeological investigations at the Topper and Big Pine Tree sites,Allendale County,South Carolina

The Topper and Big Pine Tree sites are located along the central Savannah River in South Carolina. Both sites contain significant Clovis horizons and the Topper site is reported to contain a pre-Clovis assemblage characterized by a smashed core and microlithic industry. The stratigraphic position of the early assemblage at Topper is indeed below Clovis and radiocarbon and luminescence ages support its pre-Clovis age. However, the human origin of the proposed artifacts has not been conclusively proven. The late Quaternary stratigraphic sequence developed for this segment of the Savannah River provides support for a regional pattern of river metamorphosis over the last 50,000 years in southeastern U.S. streams.     

Phenetics,cladistics, and the search for the Alaskan ancestors of the Paleoindians: a reassessment of relationships among the Clovis,Nenana, and Denali archaeological complexes

Clovis, Nenana, and Denali are the earliest well-documented archaeological complexes in the New World. Clovis has been found at sites throughout the lower 48 states of the USA and in parts of Canada but not in Alaska, whereas Nenana and Denali have been found in Alaska but not elsewhere in North America. In 1991, Goebel and colleagues reported phenetic analyses of tool types from Clovis, Nenana, and Denali. They found that Nenana clustered more closely with Clovis than with Denali, and concluded from this that Nenana was likely ancestral to Clovis. Goebel et al.'s study has been cited frequently since it was published, and their conclusions have been widely accepted. Here we explain why analyses of the type performed by Goebel et al. are problematic and also demonstrate empirically that their results are dependent on the algorithm and distance measure used. We then reanalyze their dataset with a technique from biology called cladistics. Cladistics has replaced phenetics as the method of choice for reconstructing evolutionary relationships in biology, because it is more objective. The results of this analysis differ from those obtained by Goebel and colleagues. The results strongly suggest that Denali and Clovis are in fact more closely related to each other than either is to Nenana.     

Raw material quality and Oldowan hominin toolstone preferences: evidence from Kanjera South,Kenya

The role of raw material quality in Oldowan technology has not been fully explored. There are numerous studies suggesting Oldowan hominins preferred certain types of stone for artifact manufacture. Previous studies of the artifact assemblage from the early Pliocene Oldowan locality of Kanjera South (South Rachuonyo District, Kenya) show that raw material selection and transport was an important aspect of Late Pliocene hominin adaptations. Yet the exact properties of stones that hominins were selecting remain enigmatic. Two potentially important features of artifact raw material are durability and fracture predictability. We investigate fracture predictability through mechanical tests of stone and investigations of the affect of stone properties on fracture patterns in archaeological collections. We investigate stone durability with actualistic studies of edge attrition combined with further mechanical tests of various lithologies. Oldowan hominins at Kanjera appear to have selected raw materials based on their durability. The ability for a stone to fracture consistently does not appear to be as important in hominin toolstone preference as previously assumed. Hominins that produced the assemblages at Kanjera South appear to have incorporated an extensive understanding of various attributes of raw material in the transport and production of stone artifacts. When combined with previous research on the transport patterns at Kanjera, the results of this study provide evidence for a more complex raw material acquisition strategy than has previously been suggested for Late Pliocene Oldowan hominins.     

The Peopling of the New World: Present Evidence, New Theories, and Future Directions

The prevailing archaeological consensus on Paleoindian origins and colonization of the Americas has been shaken by recent wide acknowledgment of pre-Clovis occupation at Monte Verde, Chile, and by claims that ostensibly non-Mongoloid skeletal remains might represent a precursor population. Recent mitochondrial DNA studies have been interpreted by some as indicating an earlier and more complex peopling of the continent. This paper reviews the current archaeological and biological evidence, in America and northern Asia, for the origins of Native Americans, assesses models of the colonization process in the light of new data and a revised chronology, and suggests avenues for future research.     

New experimental evidence on the relation between percussion flaking and flake variation

Controlled experiments in percussion flaking allowed for objective analysis of relationships between variables of flake production and those variables which are attributes of the final result. The independent variables, those controlled by the flintknapper in the production of stone tools, include force and angle of blow, platform thickness and exterior platform angle. The dependent variables are those attributes of the flakes which are often used in current lithic analyses and include interior platform angle, length, thickness and flake termination. The results clearly show that exterior platform angle is highly significant for understanding many aspects of flake production. These and other relationships between the independent and dependent variables are also discussed.     

Hafted armatures and multi-component tool design at the Micoquian site of Inden-Altdorf,Germany

Excavation of the Micoquian site Inden-Altdorf (Weisweiler-124) near the former German capital Bonn in western Germany has revealed the first valid open-site habitation features with hut-like structures and associated hearths for the Middle Palaeolithic in Central Europe. It has been dated to the Eemian interglacial (OIS 5e), a warm interglacial between 128 and 115 ka BP. Various wear traces and especially organic residues have been detected on a large number of stone tools using microscopic use-wear analysis of lithics recovered from the site. A multi-level analysis developed through an experimental framework and archaeological study using optical light microscopes, scanning electron microscopes and energy-dispersive X-ray microprobes identified the adhering residues as birch pitch. Birch pitch is the oldest synthetically produced material and was used as an adhesive to attach lithic implements to wooden shafts. While such hafting technology is commonly associated with modern humans in the Upper Palaeolithic, the birch pitch residues found on the Micoquian tools of Inden-Altdorf suggest that hafting technologies and the frequent use of multi-component tools already existed in the Middle Palaeolithic, c. 120 ka BP in central Europe.     

Nature and significance of the Howiesons Poort to post-Howiesons Poort transition at Klein Kliphuis rockshelter,South Africa

This paper considers the transition from Howiesons Poort to post-Howiesons Poort technologies at the rock shelter site of Klein Kliphuis, South Africa. The transition at this site is shown to be gradual, with incremental changes in material selection and in the size and shapes of flakes and cores. Implements which appear to blend characteristics of those distinctive of the earlier and later industries appear briefly at the mid-point of the transition. The results suggest that there is unlikely to have been an occupational hiatus between the Howiesons Poort and post-Howiesons Poort. Explanations for the Howiesons Poort phrased in terms of population expansion and contraction are also difficult to support. Technological changes at this time may relate to environmental variation, though the limited nature of terrestrial archives documenting changes in resource productivity necessitate that any such suggestion be made with caution.     

Blade technology and tool forms in the Middle Stone Age of South Africa: the Howiesons Poort and post-Howiesons Poort at Rose Cottage Cave

It has been suggested that between 80 and 35 ka the Middle Stone Age record of South Africa reveals episodes of inventiveness and innovation, punctuated by apparent returns to more conventional technologies. One such episode is the Howiesons Poort (HP). The appearance of a range of small geometric forms, apparently used as insets in multi-component tools, has been considered as evidence of improved hunting weapons, with possible social and symbolic connotations. On the basis of evidence such as backed tool production, small blade technology, the occurrence of typical end-scrapers and burins similar to those encountered in the European Upper Paleolithic, long-distance transport of fine-grained raw materials, and non-lithic novelties, the HP is associated with increased levels of technological efficiency and with behavioral innovations that could have allowed the expansion of African populations to other regions. Yet our knowledge of HP technology and tool production is limited to the analysis of Klasies River Main site by Singer and Wymer and Sarah Wurz, and a few preliminary reports from other sites. This is why we present here a detailed technological and typological analysis of several HP and post-HP assemblages from the well-excavated, well-dated and well-stratified site of Rose Cottage. Our analysis shows: (a) that the HP blade production was a real technical innovation, but was not based on indirect percussion, as often suggested; (b) that blade production was based on the use of marginal percussion which does not occur in the blade production of the Eurasian Middle Paleolithic; (c) that the tool kit was dominated by backed pieces, but not all can be considered as hunting weapons; (d) that neither end-scrapers nor burins are typical of this industry and are no more an antecedent to the European Upper Paleolithic than the end-scrapers and burins of the Middle Paleolithic; (e) that patterns of raw material procurement do not conform to models based on evidence from Klasies; (f) that diachronic changes within the Rose Cottage sequence indicate slow, gradual abandonment of the technological style of the HP; (g) that the post-HP assemblages are of MSA character and are typologically and technologically quite similar to the European Middle Paleolithic; (h) that the lack of persistence of the HP innovations is in need of an explanation. The HP is not a monolithic entity. Implications for the symbolic interpretations of the HP phenomenon are discussed.     

Measuring prehistoric mobility strategies based on obsidian geochemical and technological signatures in the Owens Valley,California

We compare the organization of obsidian flaked stone technologies in two different time periods at CA-INY-30, a village site in southern Owens Valley, eastern California. Previous archaeological studies suggest a reorganization in settlement patterns between the Newberry (ca. 3500–1500 BP) and Marana (ca. 650-contact) periods, from a highly mobile to a more residentially sedentary one. New geochemical data, based on laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analyses of obsidian artifacts associated with discrete house floors, support this basic settlement model, but reveal new detail in how people moved across the landscape and accessed, extracted, reduced and used obsidian resources. In the earlier Newberry period, there is no relationship between flake size and distance-to-source, and the falloff curve relating frequency of obsidian against distance is more gradual, as expected, but contrary to our expectations, source diversity is not higher. These factors suggest extremely high mobility, but also selective extraction of particular sources. Newberry obsidian may have been acquired by groups of hunters who embedded quarrying within long-distance trips to distant hunting grounds, and subsequently transported bifacial cores to base camps. By contrast, Marana patterns show strong relationships between flake size and distance from source and steeper fall-off curves, suggesting groups acquired their obsidian primarily from closer sources, likely via exchange networks. At the same time, geochemical diversity, especially among smaller resharpening flakes, is higher in the Marana period, highlighting the wide-ranging conveyance systems through which obsidian moved.     

A tale of two sites: Functional site differentiation and lithic technology during the Late Pithouse period in the Mimbres area of Southwestern New Mexico

The raw materials from which stone tools are made can provide considerable information relevant to behavioral variation within a prehistoric population. By examining the stone used for tools from two different types of Late Pithouse period (A.D. 550-1000) residential sites from the Mimbres Mogollon area of Southwestern New Mexico, this paper illustrates how understanding the lithic landscape of a region provides a means to assess behavioral variation in stone procurement practices. The analysis indicates that the differences in mobility and economic pursuits between longer-term residential sites containing pit structures and a shorter-term seasonal residential site with ephemeral architecture structured the raw material procurement practices of site’s occupants. Pit structure sites were focused on agricultural pursuits and used a technology that centered on the production of informal tools fashioned from locally available raw materials. The seasonal residential site focused on wild resources and evidenced greater reliance on formal tool production using raw materials acquired from beyond the immediate vicinity of the site. Despite increasing sedentism and agricultural dependence of the region’s population, some portion of the population exercised seasonal mobility strategies and associated technological and behavioral practices more typical of hunting and gathering populations, suggesting a diverse socio-economic system within the region.     

Introducing a new experimental design for controlled studies of flake formation: results for exterior platform angle,platform depth,angle of blow,velocity, and force

Potential variables that underlie variation in flake size, and in some instances shape, are investigated in a newly designed experiment. This new design, which utilizes glass cores molded to a specific shape, results in flakes that are identical to archaeological ones. Variation in exterior platform angle, platform depth and angle of blow all directly affect flake size, and in the case of exterior platform angle, flake shape as well (in spite of constant core surface morphology). In treating velocity and force independently, neither is found to affect flake size or shape. These results have implications for understanding different strategies that flintknappers may employ to control the size of their flake products.     

Prepared core reduction at the site of Kudu Koppie in northern South Africa: temporal patterns across the Earlier and Middle Stone Age boundary

Kudu Koppie is a stratified late Earlier Stone Age and Middle Stone Age archaeological site located in the northern Limpopo Province of South Africa. The prepared core reduction strategies are described and temporal trends across the ESA–MSA boundary are presented. The prepared cores and endproducts of Kudu Koppie suggest that both the late ESA and MSA toolmakers employed the Levallois Volumetric Concept, but they often exploited a nodule's natural convexities and form. The MSA toolmakers used a greater variety of prepared core methods and more intensively exploited cryptocrystalline and microcrystalline nodules, the scarcity of which may have resulted in a more “formalized” application of the Levallois Volumetric Concept. These observations are considered within the context of human behavioural evolution.     

Stable isotope evidence of human diet at the Nukdo shell midden site,South Korea

Carbon and nitrogen stable isotope analysis was undertaken on bone collagen extracted from archaeological human (n = 48) and animal (n = 45) skeletons from the Nukdo site, Location I C, South Korea. This shell midden and grave site is dated from the late Mumun (550–300 BC) to early Iron Age (300 BC-1 AD) periods. The herbivorous mammals fell within the range of C₃ consumers, with average values of δ¹³C = −21.0 ± 0.5‰ and δ¹⁵N = 3.6 ± 0.5‰ for deer (n = 16) and δ¹³C = −20.6 ± 0.5‰ and δ¹⁵N = 4.5 ± 2.0‰ for wild boar (n = 17). Humans from this site averaged δ¹³C = −18.3 ± 0.4‰ and δ¹⁵N = 11.2 ± 0.7‰ for adults (n = 15) and δ¹³C = −18.7 ± 0.7‰ and δ¹⁵N = 12.5 ± 1.1‰ for juveniles (n = 33). These δ¹³C values indicate that there was no significant input of C₄ plants in the human diets and this may be associated with the spread of rice agriculture in the Mumun period. Human bone collagen δ¹³C and δ¹⁵N values indicate that there was some consumption of marine foods, although the main protein sources were from terrestrial foods. The isotope data demonstrate that the humans at Nukdo had mixed diets that included marine and terrestrial protein, including C₃ plants such as rice. Finally, the isotope results from the juveniles indicate that weaning occurred before the age of 1.5 years in this period.     

Serpentine Hot Springs,Alaska: results of excavations and implications for the age and significance of northern fluted points

The dispersal of Homo sapiens across the New World is one of the greatest chapters in the history of our species; however, major questions about this late Pleistocene diaspora remain unanswered. Two contentious issues are the timing of colonization of the Bering Land Bridge and origin of Clovis, which at 13,000 calendar years ago is the earliest unequivocal complex of archaeological sites in temperate North America, known by its specialized fluted spear points. One hypothesis is that fluting technology emerged in Beringia and from there was carried southbound, with fluted points becoming the diagnostic “calling card” of early Paleoindians spreading across the Western Hemisphere. Fluted points have long been known from Alaska, yet until now they have never been found in a datable geologic context, making their relationship to Clovis a mystery. Here we show that a new archaeological site at Serpentine Hot Springs, Bering Land Bridge National Preserve, Alaska, contains fluted points in a stratified geologic deposit dating to no earlier than 12,400 calendar years ago. Our results suggest that Alaska's fluted-point complex is too young to be ancestral to Clovis, and that it instead represents either a south-to-north dispersal of early Americans or transmission of fluting technology from temperate North America. These results suggest that the peopling of the Americas and development of Paleoindian technology were much more complex than traditional models predict.