UNDER THE HAMMER: RESIDUES RESULTING FROM PRODUCTION AND MICROWEAR ON EXPERIMENTAL STONE TOOLS*

This paper presents the results of an experimental programme investigating the effects of production processes on stone tools and their interference with use‐related features. In the first part of the experimental programme, a series of flint flakes was retouched with different kinds of hammers in order to assess the extent and nature of percussion residues. After careful environmental scanning electron microscope (ESEM) observation and energy‐dispersive X‐ray (EDX) analysis, the retouched flakes were thoroughly cleaned and the underlying flint deformation was recorded. The second part of the experimental programme involved selecting several uncleaned retouched pieces for use in short woodworking, hide‐processing and butchery experiments. These pieces were observed and analysed before, during and after use. Some of the percussion features proved to be surprisingly resistant to use, and in some cases turned out to be strikingly similar in appearance to use‐generated features.     

INDUCTIVELY COUPLED PLASMA-MASS SPECTROMETRY FOR THE ANALYSIS OF ANCIENT METALS*

Inductively coupled plasma-mass spectrometry (ICP-MS) is a relatively new analytical technique, growing in popularity, that offers many advantages over previously available instrumentation for the measurement of both the elemental and isotopic composition of metallic antiquities. The application of this method of analysis to archaeological metalwork is discussed and the technique compared with other methods of analysis commonly used in archaeometallurgy. Particular attention is drawn to the potential pitfalls and difficulties associated with ICP-MS and the need for extremely careful sample preparation and instrument operation.     

PHOSPHORUS ANALYSIS AT ARCHAEOLOGICAL SITES: AN OPTIMIZATION OF THE METHOD AND INTERPRETATION OF THE RESULTS

The application of phosphorus analysis to archaeological contexts can be considerably improved through ultrasonic extraction and the statistical evaluation of results through an analysis of variance. Such tools make the archaeological application of phosphorus analysis faster as well as more economical and coherent. This paper describes the features of these tools and provides a practical case: the Late Neolithic—Early Copper phase of the site ‘Polideportivo’in Martos, southern Spain.     

THOUGHTS ON THE UTILITY OF A BIVARIATE‐SPLITTING APPROACH TO OLMEC CERAMIC DATA INTERPRETATION*

A recently resolved debate centred on the interpretation of a major set of INAA data that was based on Olmec ceramics from Mexico. In an attempt to answer questions arising from the debate, this paper discusses the effect of numbers of samples chosen for data interpretation. It also presents interpretations of the ceramic data set based on a bivariate data‐splitting approach and compares the results of this with the multivariate analysis approaches employed by the initial publishers of the data.     

DNA AND PROTEIN RECOVERY FROM WASHED EXPERIMENTAL STONE TOOLS*

Traces of protein and DNA are preserved on stone tools used to process animals. Previous research documents the identification of protein residues from tools sonicated in 5% ammonium hydroxide, but it remains untested whether the same treatment yields useable DNA. In this study we report both DNA and protein recovery using 5% ammonium hydroxide from residues on stone tools. We extracted 13‐year‐old residues from experimentally manufactured stone tools used to butcher a single animal. We also show that surface washing procedures typically used to curate stone tools remove only a small fraction of the DNA and protein deposited during animal butchery.     

SOIL PHOSPHATE ANALYSIS: A NEW TECHNIQUE FOR MEASUREMENT IN THE FIELD USING A TEST STRIP*

A new method for soil phosphate analysis has been developed for field measurement which will increase the applicability of phosphate mapping in archaeological prospection.     

THE IMPACT OF SOLUBLE SALTS ON THE DETERIORATION OF PHARAONIC AND COPTIC WALL PAINTINGS AT AL QURNA,EGYPT: MINERALOGY AND CHEMISTRY*

The wall paintings of Al Qurna in Egypt were studied by means of XRD and ICP–AES in order to determine their mineralogical and chemical composition, and to evaluate the impact of soluble salts on their deterioration, including the identification of the building materials and pigments used. Soluble salts analysis showed that NaCl is the most common soluble salt in the bedrock, ground water and surface water samples. The building materials are affected by the ground water, while the wall paintings in the area are affected by the Upper Egypt climatic conditions, which were studied in order to detect their role in the deterioration cycle in the area.     

GEOCHEMICAL PROVENANCE OF OBSIDIAN ARTEFACTS FROM THE MSA SITE OF PORC EPIC,ETHIOPIA*

Obsidian geochemical analysis has become an indispensable tool in archaeological research and has wide applications. However, in spite of the abundance of geological and archaeological obsidian, there has been virtually no such investigation in Ethiopia. Recent instrumental characterization of 31 obsidian artefacts from the Middle Stone Age site of Porc Epic and numerous obsidian geological sources show that artefacts were being transported from as far as 250 km away. We believe this has relevance to the understanding of the emergence of modern human behaviour.     

STATISTICAL ASPECTS OF POTTERY QUANTIFICATION FOR THE DATING OF SOME ARCHAEOLOGICAL CONTEXTS*

This paper describes some statistical analyses of a particular archaeological material (pottery) originating at some sites in the city of Tours. An important part of the archaeological study of pottery is the comparison of ceramic assemblages to establish the absolute dates of contexts. In this paper, a statistical model is built to assess this comparison. The statistical procedure uses classical tools (correspondence analysis, linear regression and resampling methods) in an iterative scheme. Archaeologists may find in the paper a useful set of known statistical methods, while statisticians can learn a method of ‘arranging’ well‐known techniques. No method is new, but their combination is characteristic of this application.     

BUILDING A BRIDGE TO THE PAST: ARCHAEOMETRY AT THE IPEN REACTOR

Neutron activation analysis has contributed to research in Peru in different scientific fields, particularly in archaeometry. In archaeometry, applications include the characterization of copper alloy artefacts from the tomb of El Señor de Sican to determine production methods, ceramics from the Wari Culture to study production, and distribution of Middle Horizon pottery in Cuzco, ceramics from Villa El Salvador to determine production groups, and obsidian source analysis.     

AN INVESTIGATION OF THE PROVENANCE OF THE ROMAN AMPHORA CARGO FROM THE PLEMMIRIO B SHIPWRECK

Eighty-six Roman amphora sherds from the Plemmirio B shipwreck, off Sicily, have been analysed by neutron activation analysis. A large group representative of the amphora cargo, mainly of forms Africana 1 and Africana 2A (from the area of modern Tunisia), was subsequently defined. No differences between Africana 1 and Africana 2A samples were observed, thus implying a similar origin for both forms. The provenance of this cargo group was then investigated by comparison with a Roman amphora kiln data base. After elimination of the more mobile elements it was shown that the cargo amphorae were more likely to have been manufactured at kilns around Sullecthum rather than Leptis Minor. The analytical conclusions are thoroughly consistent with the known archaeological information.     

REFINING ESTIMATES FOR THE SEASON OF SHELLFISH COLLECTION ON THE PACIFIC NORTHWEST COAST: APPLYING HIGH‐RESOLUTION STABLE OXYGEN ISOTOPE ANALYSIS AND SCLEROCHRONOLOGY

Stable oxygen isotopes from estuarine bivalve carbonate from Saxidomus gigantea were analysed combined with high‐resolution sclerochronology from modern and archaeological shells from British Columbia, Canada, to determine the seasonality of shellfish collection from the archaeological site of Namu. The combination of high‐resolution sclerochronology and a micro‐milled sampling strategy for δ¹⁸O analysis permits a precise estimate of archaeological seasonality, because seasonal freshwater influxes and changes in temperature have dual effects on the δ¹⁸O value of the shell. Sclerochronological analysis identifies the timing and duration of growth that is temporally aligned to stable oxygen isotope results, since δ¹⁸O_shell appears to be strongly influenced by seasonal inputs of very low δ¹⁸O snowmelt‐water from adjacent coastal mountain ranges. The results show that shellfish were collected year‐round at this site over a 4000‐year period, and these data combined with other zooarchaeological lines of evidence support the interpretation of year‐round occupation.     

Protecting a Cemetery in Saqqara: Site Works 1975–2009

Abstract

This article considers the varied threats to Ancient Egyptian architectural remains that have been exposed by modern excavation. A number of possible measures that counter such threats are outlined, together with the practical difficulties facing the architectural conservator working in this context. The approach taken at the New Kingdom Necropolis in Saqqara — a group of elite tombs constructed c. 1350–1250 BC — during the post-excavation phase is detailed, with an emphasis on the works carried out by the author from 2004 to 2009. This encompasses the conservation of surviving limestone relief decoration in situ, the reconstruction of missing masonry elements, and the final presentation of the site to visitors.     

THE ESTABLISHMENT OF A DATA BASE OF NEUTRON ACTIVATION ANALYSES OF WHITE MARBLE*

The establishment of a data base of trace element analysis results obtained by neutron activation analysis of 183 marble samples, each weighing about 200 mg, from eight different quarrying localities for use in provenance studies is described and a summary of the results presented. The problems of sampling museum artefacts are discussed, and details of tests of the reproducibility of the technique are given together with those obtained from multiple-samples from single museum objects. Replicate analyses of a marble standard are also discussed. Thus these data are a measure of the accuracy and precision of the technique, as well as allowing an assessment of the variation in trace element composition within quarry sources and single blocks of marble, as used for artefacts.     

SPECTROSCOPIC INVESTIGATION OF RED STAINS AFFECTING THE CARRARA MARBLE FAÇADE OF THE CERTOSA OF PAVIA

The nature of the large red stains exhibited on the Carrara marble elements of the Certosa of Pavia façade was investigated by means of spectroscopic techniques and scanning electron microscopy. Although previous microbiological analysis has demonstrated the presence on the stone of a bacterial strain identified as Micrococcus roseus, that is capable of carotenoid production, it has been ascertained in the present study that an inorganic pigment, namely Pb₃O₄, is responsible for the observed coloration. On small green spots, the presence of photosynthetic micro-organisms has been demonstrated by microbiological analysis and confirmed by resonance Raman spectroscopy.     

ESTIMATION OF THE BULK COMPOSITION OF FINE-GRAINED MEDIA FROM MICROCHEMICAL AND BACKSCATTER-IMAGE ANALYSIS: APPLICATION TO BISCUIT WASTERS FROM THE BOW FACTORY SITE,LONDON*

Microprobe and digitized electron-backscatter image data reveal that eighteenth-century Bow porcelain consists of a silica polymorph(s) (25–43 vol. %), a calcium phosphate phase (42–55%) with homogeneous and stippled textural variants, and a silicon-, aluminium-, and calcium-rich, former melt phase represented by discrete domains (14–20%) and micron-scale blebs that occupy 20–70% of the stippled calcium phosphate. Bulk compositions calculated from these data are deficient in calcium phosphate components and more siliceous than those determined by microprobe analysis of fused powders of the same samples. This reflects difficulties in determining representative values for the composition and volume of the melt phase, and underscores the limitations of the method where applied to media containing compositionally- or texturally-heterogeneous phases.     

LASER ARGON DATING AND GEOLOGICAL PROVENANCING OF A STONE AXE FROM THE STONEHENGE ENVIRONS*

The recently-developed laser microprobe ⁴⁰argon-³⁹ argon technique has been used to give a geological date for a rhyolitic tuff stone axe fragment from the Stonehenge environs. The method requires only milligramme-sized samples and gives dates of sufficient accuracy to aid in provenancing artefacts to sources, as well as information on the heating history of samples. The axe sample is of Lower Carboniferous date (341 ± 5 Ma) and this limits possible sources to outcrops within the Scottish Midland Valley and small altered exposures in Dartmoor. X-ray fluorescence analysis of the axe suggests the Scottish Midland Valley as the more likely source. The laser argon analysis also shows that the implement had not been heated in antiquity. Laser argon-argon dating can, therefore, be a useful tool in artefact study.     

LOG‐RATIO COMPOSITIONAL DATA ANALYSIS IN ARCHAEOMETRY*

Compositional data arise commonly in archaeometry, in the study of artefact compositions where the variables measured either sum to 100%, or can be viewed as a subset of such a set of variables. There has been debate in Archaeometry about the appropriate way to analyse such data statistically, which amounts to argument about how the data should be transformed prior to statistical analysis. This paper reviews aspects of the debate and illustrates, using both simulated and real data, that what has been proposed as the ‘correct’ theoretical approach—log‐ratio analysis—does not always work well. The reasons for this are discussed.     

THE USE OF IMAGE ANALYSIS TO DETERMINE YARN TWIST LEVEL IN ARCHAEOLOGICAL TEXTILES

An analysis of the structure of archaeological textiles can give an insight into different traditions, geographic origins or technologies associated with the textile production. An important parameter in this context is the level and direction of yarn twist. In this paper a new quantitative method of yarn twist measurement is described. Using image analysis techniques a measure of the mean twist level and the variation in twist can be determined. The technique is applied to a selection of woven woollen textiles from the first-century Roman fort at Vindolanda in northern England.