Re‐equilibration of fluid inclusions in diagenetic‐anchizonal rocks of the Ciñera‐Matallana coal basin (NW Spain)

Thermally re‐equilibrated fluid inclusions are reported in natural fissure quartz (qtz1) from polymineralic veins in the diagenetic‐anchizonal clastic sedimentary rocks of the Ciñera‐Matallana coal basin (Variscan, NW Spain). Euhedral quartz formed during early fissure opening from an immiscible fluid mixture composed of a low salinity aqueous solution and a CH₄‐rich vapour phase, at temperatures of about 110–120°C and pressures ranging from 15 to 56 MPa. Five textural types of re‐equilibration are recognised in progressive order of inclusion modification: scalloped, hairy, annular‐ring shaped, haloes and decrepitation clusters. These textures resulted from a combination of brittle fracturing and dissolution and re‐precipitation of quartz, with preferential loss of water. The thermal peak was short‐lived, but was high enough to induce extensive decrepitation of fluid inclusions in vein quartz throughout the entire basin. Enhanced temperatures can be related to the intrusion of diorites in the basin. Careful analysis of textural features in fluid inclusions from diagenetic and very low‐grade metamorphism environments constitutes a useful tool for recording basin thermal history.     

Magmatic fluids immiscible with silicate melts: examples from inclusions in phenocrysts and glasses, and implications for magma evolution and metal transport

The first occurrence of immiscibility in magmas appears to be most important in the magmatic–hydrothermal transition, and thus studies of magmatic immiscibility should be primarily directed towards recognition of coexisting silicate melt and essentially non-silicate liquids and fluids (aqueous, carbonic and sulphide). However, immiscible phase separation during decompression, cooling and crystallization of magmas is an inherently fugitive phenomenon. The only remaining evidence of this process and the closest approximation of natural immiscible magmatic liquids and vapours can be provided by melt and fluid inclusions trapped in silicate glasses and magmatic phenocrysts. Such inclusions are often used as a natural experimental laboratory to model the process of exsolution and the compositions of volatile-rich phases from a wide range of terrestrial magmas. In this paper several examples from recent research on melt and fluid inclusions are used to demonstrate the significance of naturally occurring immiscibility in understanding some large-scale magma chamber processes, such as degassing and partitioning of metals.     

Fluid dynamics and fluid‐structural relationships in the Red Lake mine trend,Red Lake greenstone belt,Ontario, Canada

The Red Lake mine trend, a deformation zone in the Archean Red Lake greenstone belt that hosts the world‐class Campbell‐Red Lake gold deposit, is characterized by abundant foliation‐parallel iron‐carbonate ± quartz veins with banded colloform‐crustiform structures and cockade breccias overprinted by silicification and gold mineralization. There is an apparent incompatibility between the cavity‐fill structures of the veins and breccias (typically developed at shallow crustal depths) and the upper greenschist to lower amphibole facies metamorphic conditions recorded in the host rocks (indicating relatively deep environments). This, together with the development of veins along the foliation plane, represents an enigmatic problem that may be related to the interplay between fluid dynamics and stress field. We approach this problem through systematic study of fluid inclusion planes (FIPs) in the vein minerals, including the orientations of the FIPs and the pressure–temperature conditions inferred from fluid inclusion microthermometry. We find that fluid inclusions in the main stage vein minerals (pregold mineralization ankerite and quartz and syn‐ore quartz) are predominantly carbonic without a visible aqueous phase, whereas many inclusions in the postore stage contain an aqueous phase. Most FIPs are subvertical, and many are subparallel to the foliation. High fluid pressure coupled with the high wetting angles of the water‐poor, carbonic fluids may have been responsible for the abundance of brittle deformation features. The development of subvertical FIPs is interpreted to indicate episodic switching of the maximum principal compressive stress (σ₁) from subhorizontal (perpendicular to the foliation) to subvertical (parallel to the foliation) orientation. The subvertical σ₁ is favorable for the formation of foliation‐parallel veins, as fractures are preferentially opened along the foliation in such a stress regime, the origin of which may be linked to the fluid source.     

Chemical evolution of metamorphic fluids in the Central Alps,Switzerland: insight from LA‐ICPMS analysis of fluid inclusions

The chemical evolution of fluids in Alpine fissure veins (open cavities with large free‐standing crystals) has been studied by combination of fluid inclusion petrography, microthermometry, LA‐ICPMS microanalysis, and thermodynamic modeling. The quartz vein systems cover a metamorphic cross section through the Central Alps (Switzerland), ranging from subgreenschist‐ to amphibolite‐facies conditions. Fluid compositions change from aqueous inclusions in subgreenschist‐ and greenschist‐facies rocks to aqueous–carbonic inclusions in amphibolite‐facies rocks. The fluid composition is constant for each vein, across several fluid inclusion generations that record the growth history of the quartz crystals. Chemical solute geothermometry, fluid inclusion isochores, and constraints from fluid–mineral equilibria modeling were used to reconstruct the pressure–temperature conditions of the Alpine fissure veins and to compare them with the metamorphic path of their host rocks. The data demonstrate that fluids in the Aar massif were trapped close to the metamorphic peak whereas the fluids in the Penninic nappes record early cooling, consistent with retrograde alteration. The good agreement between the fluid–mineral equilibria modeling and observed fluid compositions and host‐rock mineralogy suggests that the fluid inclusions were entrapped under rock‐buffered conditions. The molar Cl/Br ratios of the fluid inclusions are below the seawater value and would require unrealistically high degrees of evaporation and subsequent dilution if they were derived from seawater. The halogen data may thus be better explained by interaction between metamorphic fluids and organic matter or graphite in metasedimentary rocks. The volatile content (CO₂, sulfur) in the fluid inclusions increases systematically as function of the metamorphic grade, suggesting that the fluids have been produced by prograde devolatilization reactions. Only the fluids in the highest grade rocks were partly modified by retrograde fluid–rock interactions, and all major element compositions reflect equilibration with the local host rocks during the earliest stages of postmetamorphic uplift.     

Hydrothermal palaeofluid circulation in the fracture network of the Baksa Gneiss Complex of SW Pannonian Basin,Hungary

A well‐developed fracture‐filling network is filled by dominantly Ca‐Al‐silicate minerals that can be found in the polymetamorphic rock body of the Baksa Gneiss Complex (SW Hungary). Detailed investigation of this vein network revealed a characteristic diopside→epidote→sphalerite→albite ± kfeldspar→chlorite1 ± prehnite ± adularia→chlorite2→chlorite3→pyrite→calcite1→calcite2→calcite3 fracture‐filling mineral succession. Thermobarometric calculations (two feldspar: 230–336°C; chlorites: approximately 130–300°C) indicate low‐temperature vein formation conditions. The relative succession of chlorites in the mineral sequence combined with the calculated formation temperatures reveals a cooling trend during precipitation of the different chlorite phases (T_chlorite1: 260 ± 32°C →T_chlorite2: 222 ± 20°C →T_chlorite3: 154 ± 13°C). This cooling trend can be supported by the microthermometry data of primary fluid inclusions in diopside (T_h: 276–362°C) and epidote (T_h: 181–359°C) phases. The identical chemical character (0.2–1.5 eq. wt% NaCl) of these inclusions mean that vein mineralization occurred in a same fluid environment. The high trace element content (e.g. As, Cu, Zn, Mn) and Co/Ni ratio approximately 1–5 of pyrite grains support the postmagmatic hydrothermal origin of the veins. The vein microstructure and identical fluid composition indicate that vein mineralization occurred in an interconnected fracture system where crystals grew in fluid filled cracks. Vein system formed at approximately <200 MPa pressure conditions during cooling from approximately 480°C to around 150°C. The rather different fluid characteristics (T_h: 75–124°C; 17.5–22.6 eq. wt% CaCl₂) of primary inclusions of calcite1 combining with the special δ¹⁸O signature of fluid from which this mineral phase precipitated refer to hydrological connection between the crystalline basement and the sedimentary cover.     

Pattern formation during healing of fluid-filled cracks: an analog experiment

The formation and subsequent healing of cracks and crack networks may control such diverse phenomena as the strengthening of fault zones between earthquakes, fluid migrations in the Earth's crust, or the transport of radioactive materials in nuclear waste disposal. An intriguing pattern-forming process can develop during healing of fluid-filled cracks, where pockets of fluid remain permanently trapped in the solid as the crack tip is displaced driven by surface energy. Here, we present the results of analog experiments in which a liquid was injected into a colloidal inorganic gel to obtain penny-shaped cracks that were subsequently allowed to close and heal under the driving effect of interfacial tension. Depending on the properties of the gel and the injected liquid, two modes of healing were obtained. In the first mode, the crack healed completely through a continuous process. The second mode of healing was discontinuous and was characterized by a 'zipper - like' closure of a front that moved along the crack perimeter, trapping fluid that may eventually form inclusions trapped in the solid. This instability occurred only when the velocity of the crack tip decreased to zero. Our experiments provide a cheap and simple analog to reveal how aligned arrays of fluid inclusions may be captured along preexisting fracture planes and how small amounts of fluids can be permanently trapped in solids, modifying irreversibly their material properties.     

A fluid inclusion record of magmatic/hydrothermal pulses in acid Salar Ignorado gypsum,northern Chile

Salar Ignorado is a shallow acid saline lake hosted by a small intervolcanic basin high in the Andes Mountains of northern Chile. Modern surface waters have 3.3–4.1 pH, 0.5–3% total dissolved solids (TDS) and are actively precipitating gypsum crystals. The gypsum crystals trap the acid saline water as fluid inclusions, providing a record of recent surface water characteristics. Salar Ignorado gypsum contains three distinct types of primary fluid inclusions, which result from growth of the gypsum from surface waters. Petrography and microthermometry were performed on 27 gypsum crystals from Salar Ignorado to gain an understanding of recent water chemistry of the salar. One 18.3‐cm‐long gypsum crystal, hosting primary fluid inclusions along 28 successive growth bands, was the focus for fluid inclusion studies and allowed a record of high‐resolution chemical trends. This crystal showed a change in parent fluids during growth, from low salinity, to high salinity, back to low salinity. At the bottom of the crystal, the lowest six fluid inclusion assemblages have salinities of 1.7–5.1 eq. wt. % NaCl. The next nine fluid inclusion assemblages have significantly higher salinity (18.6–27.4 eq. wt. % NaCl) inclusions. The twelve fluid inclusion assemblages near the top of the crystal have low salinity (0.9–8.3 eq. wt. % NaCl) like those at the bottom of the crystal. The high‐salinity fluid inclusions in the middle of this gypsum crystal are interpreted to have formed during a pulse of magmatic/hydrothermal fluids to the surface, perhaps during local active volcanism. Secondary evidence of a magmatic influence on surface waters includes hydrogen sulfide and high molecular weight solid hydrocarbons within some fluid inclusions. This study is among the first detailed fluid inclusion studies of gypsum and suggests that fluid inclusions in gypsum can be paleo‐hydrogeologic proxies.     

Freezing and melting behaviors of H2O‐NaCl‐CaCl2 solutions in fused silica capillaries and glass‐sandwiched films: implications for fluid inclusion studies

Fluid inclusions of the H₂O‐NaCl‐CaCl₂ system are notorious for their metastable behavior during cooling and heating processes, which can render microthermometric measurement impossible or difficult and interpretation of the results ambiguous. This study addresses these problems through detailed microscopic examination of synthetic solutions during cooling and warming runs, development of methods to enhance nucleation of hydrates, and comparison of microthermometric results with different degrees of metastability with values predicted for stable conditions. Synthetic H₂O‐NaCl‐CaCl₂ solutions with different NaCl/(NaCl + CaCl₂) ratios were prepared and loaded in fused silica capillaries and glass‐sandwiched films for microthermometric studies; pure solutions were used with the capillaries to simulate fluid inclusions, whereas alumina powder was added in the solutions to facilitate ice and hydrate crystallization in the sandwiched samples. The phase changes observed and the microthermometric data obtained in this study have led to the following conclusions that have important implications for fluid inclusion studies: (i) most H₂O‐NaCl‐CaCl₂ inclusions that appear to be completely frozen in the first cooling run to ?185°C actually contain large amounts of residual solution, as also reported in some previous studies; (ii) inability of H₂O‐NaCl‐CaCl₂ inclusions to freeze completely may be related to their composition (low NaCl/(NaCl + CaCl₂) ratios) and lack of solid particles; (iii) crystallization of hydrates, which is important for cryogenic Raman spectroscopic studies of fluid inclusion composition, can be greatly enhanced by finding an optimum combination of cooling and warming rates and temperatures; and (iv) even if an inclusion is not completely frozen, the melting temperatures of hydrohalite and ice are still valid for estimating the fluid composition.     

Geological setting, nature of ore fluids and sulphur isotope geochemistry of the Fu Ning Carlin-type gold deposits, Yunnan Province, China

Carlin‐type gold deposits in southern China are present in Palaeozoic to Mesozoic siliciclastic and carbonate rocks. The border region of Yunnan, Guizhou and Guangxi Provinces contains gold deposits on the south‐western margin of the Pre‐Cambrian South China Craton in south‐eastern Yunnan Province. The Fu Ning gold deposits host epigenetic, micron‐sized disseminated gold in: (i) Middle Devonian (D₁p) black carbonaceous mudstone at the Kuzhubao gold deposit and (ii) fault breccia zones at the contact between Triassic gabbro (β ) and the Devonian mudstone (D₁p) at the Bashishan gold deposit. The deposits are associated with zones of intense deformation with enhanced permeability and porosity that focused hydrothermal fluid flow, especially where low‐angle N‐S striking thrust faults are cut by NW striking strike‐slip and/or NE striking normal faults. Major sulphide ore minerals in the Fu Ning gold deposits are pyrite, arsenopyrite, arsenic‐rich pyrite, stibnite and minor iron‐poor sphalerite. Gangue minerals are quartz, sericite, calcite, ankerite and chlorite. Hypogene ore grades range from 1 to 7 g t^?1 Au and up to 18 g t^?1 Au at the Kuzhubao gold deposit and are generally less than 3 g t^?1 Au at the Bashishan gold deposit. Sub‐microscopic gold mineralization is associated with finely disseminated arsenic‐rich pyrite in the Stage III mineral assemblage. Two types of primary fluid inclusions have been recorded: Type I liquid–vapour inclusions with moderate‐to‐high liquid/vapour ratios, and Type II inclusions containing moderate liquid/vapour ratios with CO₂ as determined from laser Raman analysis. Temperature of homogenization (T_h) data collected from these primary fluid inclusions in gold‐ore Stage III quartz ranged from 180 to 275°C at the Kuzhubao gold deposit and 210 to 330°C at the Bashishan gold deposit. Salinity results indicate that there were possibly two fluids present during gold deposition, including: (i) an early fluid with 0.8–6.5 wt.% NaCl equivalent, similar to salinity in shear‐zone‐hosted gold deposits with metamorphic derived fluids; and (ii) a late fluid with 11.8–13.4 wt.% NaCl equivalent, indicating possible derivation from connate waters and/or brine sources. CO₂ and trace CH₄ were only detected by laser Raman spectrometry in gold‐ore‐stage primary fluid inclusions. Results of sulphur isotope studies showed that δ³⁴S values for pyrite and arsenopyrite associated with gold‐ore mineralization during Stage III at the Kuzhubao and Bashishan gold deposits are isotopically similar and moderately heavy with a range from +9 to +15 per mil, and also fall into the range of δ³⁴S values reported for Carlin‐type gold deposits. Sulphur isotopes suggest that the Fu Ning gold deposits were formed from connate waters and/or basinal brines. Fluid geochemistry data from the Fu Ning gold deposits suggest a Carlin‐type genetic model, involving fluid mixing between: (i) deep CO₂‐rich metamorphic fluids, (ii) moderately saline, reduced connate waters and/or basinal brines; and (iii) evolved meteoric waters.     

Fluid inclusion and isotopic constraints on the origin of ore‐forming fluid of the Jinman–Liancheng vein Cu deposit in the Lanping Basin,western Yunnan,China

Extensive quartz–carbonate–Cu sulfide veins occur in clastic rocks and are spatially related to Paleocene granites in the western border of the Lanping Basin, western Yunnan, China. Abundant aqueous‐carbonic fluid inclusions occur in these veins but their origin is debated. In the Jinman–Liancheng deposit, individual primary inclusion groups contain either exclusively liquid‐rich inclusions (Gl), or coexisting liquid‐rich and vapor‐rich inclusions (Glv). Microthermometry and estimate of CO₂ content indicate that type Gl inclusions either have homogenization temperatures (Th) 238–263°C and contain c. 3.9–5.5 mole % CO₂, or have Th 178–222°C and contain c. 1.6–3.2 mole % CO₂. Type Glv inclusions are thought to represent samples of fluid unmixing that occurred at 183–218°C. At that time, the liquid phase in the unmixing fluid may contain c. 2.0–3.3 mole % CO₂. As such, the correlation of CO₂ content with Th for type Gl inclusions is thought to be caused by fluid unmixing with decreasing temperature and subsequent CO₂ escape. δ¹⁸O and δD values of the parent water mainly fall in the field below that of primary magmatic water, indicative of fluid derivation from degassed (in open system) magmatic water, with no contributions from basinal or meteoric water. Initial Sr isotopic compositions of hydrothermal carbonates suggest that the fluid was magmatic, probably derived from the Paleogene granites. δ¹³C_PDB values (?4‰ to ?7‰) of the hydrothermal carbonates and δ³⁴S_V‐CDT values of sulfides (mainly ?11‰ to +5‰) indicate that the carbon and sulfur can be derived from (degassed) magma and/or nonmagmatic sources. The CO₂‐rich and magmatic‐water‐derived fluid at Jinman–Liancheng differs from the CO₂‐poor and basinally derived fluid in sediment‐hosted stratiform Cu (SSC) deposits, which suggests that there are no genetic linkages between the vein Cu and SSC deposits in the Lanping Basin.     

In situ decarboxylation of acetic and formic acids in aqueous inclusions as a possible way to produce excess CH4

Accurate reconstruction of diagenetic P‐T conditions in petroleum reservoirs from fluid inclusion data relies on valid measurements of methane concentration in aqueous inclusions. Techniques have been developed (Raman spectrometry) to provide sufficiently accurate data, assuming measured methane concentration has not been modified after aqueous inclusion entrapment. This study investigates the likelihood that organic acids derived from petroleum fluids and dissolved in formation water might suffer decarboxylation upon postentrapment heating within the fluid inclusion chamber, thereby generating excess CH₄ in the inclusions. Four different experiments were conducted in fused silica capillary capsules (FSCCs), mimicking fluid inclusions. The capsules were loaded with acetic (CH₃COOH) or formic (HCOOH) acid solution and were heated to 250°C for short durations (<72 h) in closed‐system conditions, with or without applying a fixed P_H2. Reaction products were characterized by Raman and FT‐IR spectrometry. Results indicate that decarboxylation reactions did take place, at variable degrees of progress, and that measurable excess CH₄ was produced in one experiment using acetic acid. This suggests that methane may be produced from dissolved organic acids in natural aqueous inclusions in specific situations, possibly inducing errors in the thermodynamic interpretation.     

Palaeo‐formation water evolution in the Latrobe aquifer,Gippsland Basin,south‐eastern Australia continental shelf

Offshore fresh or brackish groundwater has been observed around the globe and represents an interesting but unusual freshwater reserve. Formation waters in sedimentary basins evolve at geological time through fluid–rock interactions and water movements in aquifers. However, the mechanism and timing of freshwater displacing and mixing with pre‐existing formation water offshore under the seafloor has not been investigated in many cases. The growing need for developing freshwater resources in deeper parts of sedimentary basins that have not been economic or technically feasible in the past, may potentially lead to an increasing conflict with petroleum production or injection of carbon dioxide. For being able to assess and mitigate possible impacts of fluid production or injection on groundwater flow and quality, a better understanding of the natural history of the interaction between fresh meteoric water and deep basin formation water is necessary. A low‐salinity wedge of meteoric origin with less than 5000 ppm currently extends to about 20 km offshore in the confined Latrobe aquifer in the Gippsland Basin (Australia). The Latrobe aquifer is a freshwater resource in the onshore, hosts major petroleum reservoirs and has been considered for carbon dioxide storage in the offshore parts of the basin. The objective of this study is to constrain the evolution of formation water in the Latrobe aquifer by investigating the water naturally trapped in fluid inclusions during burial. The measured palaeo‐salinities from onshore and offshore rock samples have a minimum of about 12 500 ppm (NaCl equivalent) and a maximum of about 50 000 ppm. Most of the salinities are in the 32 000–35 000 ppm range. There is no evidence for freshwater in fluid inclusions and the variation in palaeo‐salinity across the basin is consistent with the palaeogeography of deposition of the sedimentary rocks. The current low‐salinity water wedge must have started to form recently after most of the diagenetic processes that led to the trapping of water in fluid inclusions happened. The minimum homogenisation temperatures (T_h) recorded are consistent with current formation temperature. However, they are generally higher than present day suggesting that hotter temperatures were attained in the past. The T_h and salinity data together suggest that the fluid inclusions record the diagenetic modification of connate water to higher salinities over a time period that was accompanied by an increase in temperature, consistent with a westward palaeo‐fluid flow from the deeper part of the basin through the aquifer. Subsequent pore‐water evolution from palaeo‐ to current day conditions is consistent with an influx of fresher and cooler meteoric water into the Latrobe Group. The meteoric recharge originates from the area of the Baragwanath anticline in the onshore part of the basin where the Latrobe Group subcrops at high elevations.     

Rapid Na, Cu exchange between synthetic fluid inclusions and external aqueous solutions: evidence from LA-ICP-MS analysis

Three sets of equilibration experiments (Set 1 to Set 3) were performed in cold-seal pressure vessels to investigate the compositional modification of quartz-hosted fluid inclusions after entrapment. Each set of experiment consisted of two stages. In a pre-run, fluid inclusions containing 5–10 wt% NaCl and selected trace elements were synthesized at 700°C/140–200 MPa. These samples were then loaded into new capsules together with Cu-bearing solutions and some mineral buffers, and re-equilibrated at 600–800°C and 70–140 MPa for 6–8 days. LA-ICP-MS analysis of individual fluid inclusions reveals that in re-equilibration experiments in which the outer fluid was composed of KCl (±FeCl₂) up to 83% of the original Na content of pre-existing fluid inclusions were lost, and up to 5660 ppm Cu were gained. Other elements with larger ionic radii (i.e. K, Fe, Ba, Sr) were not exchanged, demonstrating that the inclusions remained physically intact and that Na and Cu were transported through quartz by diffusion. The observed Na loss from pre-existing fluid inclusions correlates positively with Cu gain, with about 1 Cu atom being gained per 10 Na atoms lost. Thus, Na and Cu (plus probably H) were exchanged by interdiffusion. Remarkably, this processes resulted in up to 10 times higher Cu concentrations in re-equilibrated inclusions than were present in the outer fluid, i.e. Cu diffused 'uphill'. Large variations of Cu concentrations relative to the concentration of other elements are common also in natural fluid inclusion assemblages. However, no evidence for a correlation between Cu content and Na content was found so far, suggesting that Cu diffusion in natural samples may be dominated by processes other than Na–Cu interdiffusion.     

The origins of salinity in metamorphic fluids

Evaluation of data on formation waters and metamorphic fluids sampled by drilling or preserved in fluid inclusions reveals little correlation between fluid salinity and metamorphic grade, but a strong link to original sedimentary setting. Sediments and metasediments deposited originally in shallow marine environments can contain fluids with a very wide range of salinities, but they are commonly near twice seawater salinity or higher. With increasing metamorphic grade, a very wide range of salinities may develop, with the highest levels tracking halite saturation. Oceanic and accretionary prism sequences yield low‐salinity fluids, close to seawater values, almost irrespective of metamorphic grade until extreme conditions are reached where removal of water may increase fluid salinity. The salinities of metamorphic fluids exert a fundamental control on both fluid phase equilibria and metal‐transporting capability, and appear, to a large degree, to reflect the original presence or absence of highly saline formation waters and/or evaporites in the initial sedimentary sequence.     

The inclusion record of fluid evolution,crack healing and trapping from a heterogeneous system during rapid cooling of pegmatitic veins (Dronning Maud Land; Antarctica)

Granitoid (pegmatite and aplite) veins in metamorphic rocks and intrusive syenites of central Dronning Maud Land, Antarctica, are flanked by conspicuous light‐coloured alteration halos, which represent the damage zone of fracture propagation. The damage zone is characterized by a high density of sealed or healed microcracks, about 1 order of magnitude above background. Fluid inclusions along healed microcracks in quartz of both pegmatite and alteration halos are inspected by optical and scanning electron microscopy, and their composition is analysed by microthermometry and quadrupole mass spectrometry. The similar inclusion record in the granitoid vein and in the damaged host rock indicates the derivation of the fluids from the hydrous melt phase. The aqueous inclusions bear abundant daughter crystals, mainly silicates, and may represent a hydrous melt. The volatile composition is variable in the system H₂O–CO₂, with mostly subordinate amounts of N₂. Phase separation with partitioning of CO₂ into the fluid phase coexisting with the hydrous melt, and possibly immiscibility in the subsolidus range, govern fluid evolution during cooling. The variable CO₂/N₂ ratio suggests mixing with fluids from an external source in the host rock and vigorous circulation at an early stage of high transient permeability. Experiments have shown that healing of microcracks at high temperatures is a matter of hours to weeks, hence similar in time scale to the cooling of the cm‐ to dm‐thick granitoid veins. In this case, rapid cooling and concomitant crack healing in a system undergoing phase separation causes a broad compositional variability of the inclusions due to necking down, and the underpressure developing in closed compartments precludes a meaningful thermobarometric interpretation.     

Role of compressive tectonics on gas charging into the Ordovician sandstone reservoirs in the Sbaa Basin,Algeria: constrained by fluid inclusions and mineralogical data

Structure‐ and tectonic‐related gas migration into Ordovician sandstone reservoirs and its impact on diagenesis history were reconstructed in two gas fields in the Sbaa Basin, in SW Algeria. This was accomplished by petrographical observations, fluid inclusion microthermometry and stable isotope geochemistry on quartz, dickite and carbonate cements and veins. Two successive phases of quartz cementation (CQ1 and CQ2) occurred in the reservoirs. Two phase aqueous inclusions show an increase in temperatures and salinities from the first CQ1 diagenetic phase toward CQ2 in both fields. Microthermometric data on gas inclusions in quartz veins reveal the presence of an average of 92 ± 5 mole% of CH₄ considering a CH₄‐CO₂ system, which is similar to the present‐day gas composition in the reservoirs. The presence of primary methane inclusions in early quartz overgrowths and in quartz and calcite veins suggests that hydrocarbon migration into the reservoir occurred synchronically with early quartz cementation in the sandstones located near the contact with the Silurian gas source rock at 100–140°C during the Late Carboniferous period and the late Hercynian episode fracturing at temperatures between 117 and 185°C, which increased in the NW‐direction of the basin. During the fracture filling, three main types of fluids were identified with different salinities and formation temperatures. A supplementary phase of higher fluid temperature (up to 226°C) recorded in late quartz, and calcite veins is related to a Jurassic thermal event. The occurrence of dickite cements close to the Silurian base near the main fault areas in both fields is mainly correlated with the sandstones where the early gas was charged. It implies that dickite precipitation is related to acidic influx. Late carbonate cements and veins (calcite – siderite – ankerite and strontianite) occurred at the same depths resulting from the same groundwater precipitation. The absence of methane inclusions in calcite cements result from methane flushing by saline waters.     

High‐temperature magmatic fluid exsolved from magma at the Duobuza porphyry copper–gold deposit,Northern Tibet

The Duobuza porphyry copper–gold deposit (proven Cu resources of 2.7 Mt, 0.94% Cu and 13 t gold, 0.21 g t^?1 Au) is located at the northern margin of the Bangong‐Nujiang suture zone separating the Qiangtang and Lhasa Terranes. The major ore‐bearing porphyry consists of granodiorite. The alteration zone extends from silicification and potassic alteration close to the porphyry stock to moderate argillic alteration and propylitization further out. Phyllic alteration is not well developed. Sericite‐quartz veins only occur locally. High‐temperature, high‐salinity fluid inclusions were observed in quartz phenocrysts and various quartz veins. These fluid inclusions are characterized by sylvite dissolution between 180 and 360°C and halite dissolution between 240 and 540°C, followed by homogenization through vapor disappearance between 620 and 960°C. Daughter minerals were identified by SEM as chalcopyrite, halite, sylvite, rutile, K–feldspar, and Fe–Mn‐chloride. They indicate that the fluid is rich in ore‐forming elements and of high oxidation state. The fluid belongs to a complex hydrothermal system containing H₂O – NaCl – KCl ± FeCl₂ ± CaCl₂ ± MnCl₂. With decreasing homogenization temperature, the fluid salinity tends to increase from 34 to 82 wt% NaCl equiv., possibly suggesting a pressure or Cl/H₂O increase in the original magma. No coexisting vapor‐rich fluid inclusions with similar homogenization temperatures were found, so the brines are interpreted to have formed by direct exsolution from magma rather than trough boiling off of a low‐salinity vapor. Estimated minimum pressure of 160 MPa imply approximately 7‐km depth. This indicates that the deposit represents an orthomagmatic end member of the porphyry copper deposit continuum. Two key factors are proposed for the fluid evolution responsible for the large size of the gold‐rich porphyry copper deposit of Duobuza: (i) ore‐forming fluids separated early from the magma, and (ii) the hydrothermal fluid system was of magmatic origin and highly oxidized.     

Fluids and halogens at the diagenetic–metamorphic boundary: evidence from veins in continental basins, western Norway

Seven vein types are recognized in three continental Devonian molasse basins (the Hornelen, Kvamshesten and Solund basins) in western Norway. These include calcite‐, quartz‐ and epidote‐dominated veins. The salinities of fluid inclusions from quartz‐dominated veins in the Hornelen and Kvamshesten basins are close to or slightly higher than those for modern seawater, whereas the fluids from quartz‐ and calcite‐dominated veins in the Solund basin range from seawater values to 20 wt % NaCl equivalent. Minerals such as biotite, amphibole, titanite, chlorite and epidote are abundant in the latter veins, and are important constituents of the authigenic mineral assemblages. A combination of fluid inclusion and petrological data suggest that at least some of the veins formed at depths around 12–14 km. The Cl/Br ratios and the salinity of the fluid inclusions can be explained by interactions with evaporites, implying that the sedimentary environment forming the basin fill had the strongest influence upon low‐grade metamorphic fluid Cl and Br contents. Differences in the Cl/I and Na/Br ratios between the Solund basin and the Hornelen and Kvamshesten basins are best explained by local mass transfer between pore fluids and the surrounding rock matrix during burial and increasing temperatures.     

Quartz recrystallization and fluid flow during contact metamorphism: a cathodoluminescence study

Cathodoluminescence (CL) images of quartz grains in the Appin Quartzite from the aureole of the Ballachulish Igneous Complex (Scotland) reveal a textural complexity that we interpret in the light of published models of the evolution of the contact aureole. Five distinct generations of quartz can be discriminated in CL. The oldest of these is a dark luminescing mottled quartz (Type 1 quartz) that occurs in the centres of pre‐existing grains, in samples collected from 210 m to 0.1 m from the contact. Dark mottled quartz is interpreted to be unrecrystallized material and has a regional metamorphic CL spectral signature. The onset of contact metamorphism resulted in grain growth visible in CL as a series of fine‐scale alternating bands of bright and dark luminescing material (Type 2 quartz), which we attribute to infiltration of repeated pulses of small amounts of H₂O along grain boundaries. Close to the intrusion, a subgrain‐scale network of intragranular, bright luminescing features could have resulted from either intragranular microcrack‐controlled infiltration of H₂O at high temperatures or intergranular cracking followed by grain growth (Type 3 quartz). Broad bands of bright material on grain boundaries in samples that are inferred to have undergone partial melting are interpreted as quartz crystallized from the melt phase (Type 4 quartz). The final stage in the textural development is marked by a series of aligned fractures, detected in CL by nonluminescing material (Type 5 quartz) and corresponding closely with trails of fluid inclusions. These fractures are interpreted as the pathways for late‐stage, low‐temperature, retrogressive fluids.     

Mineralogy and fluid inclusion gas chemistry of production well mineral scale deposits at the Dixie Valley geothermal field,USA

At the Dixie Valley geothermal field, Nevada, USA, fluid boiling triggered the precipitation of carbonate scale minerals in concentric bands around tubing inserted into production well 28–33. When the tubing was removed, this mineral scale was sampled at 44 depth intervals between the wellhead and 1227 m depth. These samples provide a unique opportunity to evaluate the effects of fluid boiling on the scale mineralogy and geochemistry of the vapor and liquid phase. In this study, the mineralogy of the scale deposits and the composition of the fluid inclusion gases trapped in the mineral scales were analyzed. The scale consists mainly of calcite from 670–1112 m depth and aragonite from 1125 to 1227 m depth, with traces of quartz and Mg‐smectite. Mineral textures, including hopper growth, twinning, and fibrous growth in the aragonite and banded deposits of fine grained calcite crystals, are the result of progressive boiling. The fluid inclusion noncondensable gas was dominated by CO₂. However, significant variations in He relative to N₂ and Ar provide evidence that the geothermal reservoir consists of mixed source deeply circulating reservoir water and shallow, air saturated meteoric water. Gas analyses for many inclusions also showed higher CH₄ and H₂ relative to CO₂ than measured in gas sampled from this well, other production wells, and fumaroles. These inclusions are interpreted to have trapped CH₄‐ and H₂‐enriched gas resulting from early stages of boiling.