Identifying the sources of Inka period ceramics from northern Chile: results of a neutron activation study

To examine regional patterns of ceramic production and distribution during the era of Inka domination in northern Chile, we determined the elemental compositions of 157 samples of archaeological ceramics and geological clays from the sites of Catarpe and Turi using instrumental neutron activation analysis. We identified two major and three minor composition groups in the ceramics. The major groups, High Cr and Low Cr, are linked to clays from two broad geological contexts within the region, while the minor Low Na group is made up of ceramics imported from northwestern Argentina. The distribution of the composition groups indicates that, in the Catarpe–Turi region, patterns of ceramic production differed for different vessel types: jars were made from clay and temper acquired near the sites where the jars were used, while bowls were made of material coming from more distant sources. The geographical distribution of the analyzed ceramics indicates that bowls were exchanged between Catarpe and Turi in a pattern more similar to tribute/extraction than to market exchange, with Catarpe being the dominant site. The compositional analysis also demonstrates that Inka-style ceramics were being locally produced at sites in this region during the era of Inka domination.     

Prehistoric Settlement,Mobility and Societal Structure in the Peak District National Park: New Evidence from Ceramic Compositional Analysis

Detailed compositional and technological analysis of a large assemblage of prehistoric ceramics from numerous sites situated within the Peak District National Park has been used to explore the settlement patterns, societal structure, mobility and interaction of the populations that inhabited this area during the Early Bronze Age to Early Iron Age. A surprising pattern emerges of the widespread dominance of a single, geographically restricted temper type, which appears to have been transported and mixed with locally procured clay and used to produce pottery at numerous different sites. The distribution of this and several other compositional groups are defined via thin‐section petrography and compared to raw material field samples. The resulting patterns are used to assess the validity of previous theories about prehistoric life in this region during the third to first millennia bc .     

A compositional perspective on the origins of the “Nasca cult” at Cahuachi

We provide a compositional perspective on the origins of the Cahuachi cult in Nasca, south coast of Peru. Instrumental Neutron Activation Analysis of ceramics from the Formative site of La Puntilla demonstrate that a small group of pottery known as Nasca 1 blackwares are compositionally consistent with Early Nasca polychromes originating at Cahuachi. These data suggest that the patterns of pilgrimage and group ceremonies exhibited at Cahuachi during Early Nasca began at least in the proto-Nasca phase of Nasca 1 during the Formative. We use these data to further document the Paracas to Nasca transition, a complex and dynamic period in south coastal prehistory.     

Investigating compositional diversity among Fijian ceramics with laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS): implications for interaction studies on geologically similar islands

This paper presents a ceramic provenance analysis of 260 Fijian sherd clays by laser-ablation inductively-coupled-plasma mass spectrometry (LA-ICP-MS). Our analyses define three compositional groups in western Fijian ceramics distributed across the 2700 year ceramic sequence. Frequencies of compositional groups represented in the diachronic assemblages indicate an increasing spatial sphere of interaction until approximately 1500 BP. By 1000 BP interaction had spatially contracted to a significant degree. These findings suggest re-evaluation of current ideas about interaction in the southwest Pacific is necessary.     

Neutron activation analysis of fine grey pottery from Conimbriga,Santa Olaia and Tavarede,Portugal

The concentrations of two major elements and thirteen trace elements in 73 selected sherds of fine grey ware from the Iron Age and Roman period, excavated at Conimbriga, Santa Olaia and Tavarede, Portugal, were determined by instrumental neutron activation analysis. These concentrations were used to calculate distance matrices which were then subjected to cluster analysis employing SAHN and k-means methods, as well as to principal components analysis, to group the sherds according to the overall similarity of their compositional characteristics. The results showed that equivalent groupings appeared regardless of the taxonomic method used. Two major clusters were recognized corresponding to two different sites, namely Conimbriga and Santa Olaia, suggesting that the ceramics from these sites were made locally. No significant differences in compositional patterns were observed between iron age and roman sherds from Conimbriga.     

CALCAREOUS MICROFOSSILS IN BRONZE AGE AEGEAN CERAMICS: ILLUMINATING TECHNOLOGY AND PROVENANCE*

The calcareous skeletal remains of various microscopic organisms such as foraminifera and ostracods are a striking feature of thin sections of many archaeological ceramics from the Aegean Bronze Age. While the presence of these calcareous microfossils in pottery has been noted for some time, attempts to utilize them to further the aims of ceramic compositional analysis have been few in number. In the following paper, we take a first detailed look at the occurrence and utility of calcareous microfossils in archaeological ceramics. By presenting selected case studies from the Bronze Age of Crete, we demonstrate the potential of calcareous microfossils, especially the extremely small ‘nannofossils’ and the highly contextual geological information that they contain, in terms of the characterization and grouping of ceramics, the determination of their provenance and the reconstruction of ancient technology.     

Ceramic Technology and Social Boundaries: Cultural Practices in Kalinga Clay Selection and Use

This study examines cultural sources of variation in ceramic compositional patterning in two pottery-making villages of the highland Philippines. In Dalupa, many potters are part-time specialists whereas in Dangtalan, women make pottery less frequently. Previous studies show that both pottery form and decoration correspond well with Kalinga social boundaries, but how do morphological and decorative patterning relate to compositional variability? Although researchers have made substantial advances in our understanding of natural and postdepositional sources of compositional variability, little is known about behavioral factors that affect chemical and mineralogical compositional patterning. This study examines cultural practices of clay selection and use in an ethnographic setting, and undertakes technical analyses to assess the relationship between behavior and material culture patterning. Our study identified paste differences between the clays and fired ceramics from Dangtalan and those from Dalupa. Findings from our compositional research thus parallel earlier morphological and stylistic studies, and illustrate multivariate differences in ceramics from these two Kalinga communities. This ethnoarchaeological and analytical project contributes, therefore, to understanding objective parameters within a behavioral context. It also provides an example of how a combined characterization approach, using chemical and petrographic techniques, can yield insights on intraregional variation at a finer scale of resolution than is often attempted.     

Athenian Black Gloss Pottery: A View from the West

Excavation of archaic Morgantina (c.700–450 BC), Sicily, has brought to light a significant pattern in the distribution of imported Greek pottery. This pattern, which shows a preference for imports with features that referred to metal vessels, is echoed at sites around the western Mediterranean. We argue that the preference for certain types was communicated back to Greek producers, and that it also reflects the particular local interests of non‐Greeks, who associated metallic features not only with wealth, but also with their own ancestral traditions.     

The Source Provenance of Bronze Age and Roman pottery from Cyprus

Archaeological interpretations of ancient economies have been strengthened by chemical analyses of ceramics, which provide the clearest evidence for economic activity, and comprise both the objects of exchange and its means. Pottery is often manufactured from local materials, but its compositional diversity typically prevents significant patterns of resource utilization from being identified. Centrally located and positioned on traditional shipping routes, Cyprus maintained ties with and supplied a variety of distinctive ceramic products to the major commercial centres in the eastern Mediterranean throughout Antiquity. We analysed two Cypriot .ne wares and a variety of utilitarian pottery, as well as samples of extant Cypriot clays to determine source provenance. These chemical analyses provide an objective indication of the origins of ancient (Bronze Age and Roman) ceramics manufactured on Cyprus. The distribution of the probable clay sources and the links between pottery style and the material environment also afford a perspective on the spatial organization of large‐scale pottery production on the island. Compositional analysis provides the means to assemble geographies of pottery production and to unravel the interregional system of exchange that operated in Antiquity, but the ability to accomplish these tasks is predicated on systematic analyses of ceramic products and raw materials that are found far beyond the bounds of individual archaeological sites.     

Temper mixture models and assessing ceramic complexity in the emerging Tarascan state

This study presents compositional data from ceramics drawn from surface survey and controlled excavations from three prehispanic sites within the relatively small Lake Pátzcuaro Basin, representing a ceramic sequence stretching nearly 1500 years, from the Preclassic to Late Postclassic Tarascan state (ca. 50 B.C.–1525 A.D.). Using neutron activation analysis, we identify compositional groups and model the importance of volcanic materials as temper in the construction of prehispanic ceramics by matching mathematical simulations of clay–ash mixes to the compositional groups. Rather than discreet clay resources and spatially circumscribed production, we argue for a broadly dispersed and highly varied organization of pre-Tarascan and Tarascan state ceramic production in which the potters' distribution and use of specific volcanic ashy additives, not clays, structured the organization of production.     

Identifying pottery clay from rice fields: an example from southern Luzon,the Philippines

The general type of clay used by potters can often be identified from attributes of the finished ceramic vessel or sherd. This information is important for compositional and sourcing studies and may also shed light on the variables influencing clay choice such as social, economic, and landscape use patterns. Rice paddies are one type of clay source that are readily identifiable in archaeological ceramics. This paper describes rice paddy clays gathered during ethnoarchaeological studies of traditional potters in Paradijon, southern Luzon, the Philippines. We analyze the effects of clay processing and vessel manufacture on these clays and find that the most diagnostic attribute of paddy soils, the iron oxide mottling, is retained in finished vessels.     

Earthenware production and distribution in the prehispanic Philippine polity of Tanjay: results from laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS)

This paper presents the results of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) analysis of low-fired earthenware from the prehispanic trading polity of Tanjay (c. A.D. 500–1600) in the central Philippines. The goal of this project was to determine whether or not the compositional analysis of ceramics could be used to examine the organization of pottery production and exchange relationships in the Bais-Tanjay region of Negros Island. Results indicate that at least five distinct groups of ceramics can be differentiated based on elemental compositions and that pottery production was both a part-time, dispersed endeavor and a full-time, likely centralized, craft. In addition, a number of compositional outliers in the ceramic dataset suggest that interregional trade took place, with pottery made outside the Bais-Tanjay region being imported, especially by upland swidden farmers.     

The composition of late Romano-British colourless vessel glass: glass production and consumption

One hundred and twenty-eight colourless glass tablewares from settlement contexts throughout the British Isles, dating from the mid-3rd to 4th century AD, were analysed by ICP-AES spectrometry. Three distinct compositional groups were identified based upon the use of different decolourisers and primary raw materials, with possible sub-groups within these. These compositions have distinct, but overlapping chronological ranges, suggesting colourless glass production in at least three, possibly more, centres in the late Roman period. The compositional analysis highlights the high degree to which recycling of glass was taking place during this late period. The chronological distribution of some of these compositions is more restricted within the British assemblages than is observed in other published assemblages from Western Europe. This distinction may indicate different supply patterns of glass to the Western provinces.     

Sourcing ceramics with portable XRF spectrometers? A comparison with INAA using Mimbres pottery from the American Southwest

Seventy-five intact Mimbres and Jornada pottery sherds from the American Southwest were analyzed by portable XRF and instrumental neutron activation analysis (INAA). Examination of the data demonstrates that INAA and portable XRF results for elements common to both analyses can be used to construct similar compositional groups. When individual compositional groups are compared to one another, it is apparent that unambiguous separation of compositional groups is challenging by portable XRF given (1) the limited number of key discriminating elements that can be measured relative to INAA, and (2) the relative analytical precision and accuracy of portable XRF for measurements of intact heterogeneous ceramics. We conclude that sourcing intact ceramics by portable XRF is challenging and that bulk analytical measurements, such as INAA, remain a better approach for sourcing archaeological pottery.     

A Late Antique Ceramic Assemblage at Burgaz,Datça Peninsula,South‐west Turkey,and the ‘Normality of the Mixed Cargo’ in the Ancient Mediterranean

By combining underwater survey with formal and compositional study of ceramics, recent work at Burgaz (south‐west Turkey) reveals a late 6th‐ or 7th‐century assemblage of wine and perhaps other agricultural products carried in LR1 and LR2‐related amphoras. Representing various south‐east Aegean and likely Cilician producers, the mixed cargo aboard this probable shipwreck offers insights into the complex dynamics of seaborne distribution at the end of Antiquity. This brief study also underscores the need for documentation in underwater survey of amphora forms and fabrics, particularly those from a period characterized by intensified and diversified production of supra‐regional ceramic types.     

The Composition of the São Brás Copper Hoard in Relation to the Bell Beaker Metallurgy in the South‐western Iberian Peninsula

A large ceramic vessel was discovered at São Brás (southern Portugal) containing a metallic hoard from the Chalcolithic/Early Bronze Age period. These weapons and tools were characterized by microanalytical techniques as being composed of copper with varying arsenic contents (2.2 ± 1.6 wt%) and minor amounts of lead, bismuth and iron. The collection shows a clear association between daggers and copper with a higher arsenic content, which can be explained by the high status of these silvery alloys. Finally, the compositional distribution of the hoard was compared with the metallurgy of the Bell Beaker and non–Bell Beaker communities inhabiting the south‐western Iberian Peninsula.     

河南济源市蓼坞汉墓

一、概况 1994年7月,河南省公安厅接黄河小浪底水利枢纽建设管理局公安处汇报,该局在驻地施工中发现古代墓葬一座,出土数十……     

IDENTIFICATION OF POST‐DEPOSITIONAL CHEMICAL ALTERATION OF CERAMICS FROM THE NORTH COAST OF PAPUA NEW GUINEA (SANDUAN PROVINCE) BY TIME‐OF‐FLIGHT–LASER ABLATION–INDUCTIVELY COUPLED PLASMA–MASS SPECTROMETRY (TOF–LA–ICP–MS)*

The measured chemical composition of archaeological ceramics can result from a variety of geological, cultural and taphonomic factors. In the present study, we evaluate the likelihood that elevated barium concentrations in ceramics from the archaeological site of Wom/Aiser, located on the northern coast of Papua New Guinea, result from post‐depositional enrichment. Using time‐of‐flight–laser ablation–inductively coupled plasma–mass spectrometry, we mapped chemical compositional profiles across cut sections of ceramic sherds from four archaeological sites, all previously chemically characterized. We identify the formation of pronounced concentration gradients in samples from Wom/Aiser relative to sherds with low barium concentrations, consistent with post‐burial uptake.     

Mineralogical analysis and provenancing of ancient ceramics using automated SEM-EDS analysis (QEMSCAN®): a pilot study on LB I pottery from Akrotiri,Thera

A wide range of existing mineralogical and geochemical methodologies such as optical microscopy, X-ray diffraction, manual scanning electron microscopy, ICP-MS and INAA have been utilised in the analysis of ancient ceramics, in attempts to elucidate patterns of regional trade and interaction. However, advances in automated scanning electron microscopy with linked energy dispersive spectrometers (SEM-EDS) have created the potential to offer a seamless combination of textural and mineralogical data based on the acquisition of energy dispersive spectra that has so far been unattainable with existing techniques. In this pilot study on pottery from the Cycladic Bronze Age site of Akrotiri (Thera), we have quantified the mineralogy of the ceramics based on automated SEM-EDS using QEMSCAN^® technology and imaged the textures of the ceramics through compositional mapping. Thirteen samples were analysed and, based upon the automated analysis, four groups of ceramic compositions are defined. These data are consistent with, but also refine, previous traditional petrographic examination of the ceramic samples, and enable the likely provenance of the raw materials used in the ceramic manufacture to be identified. This technique allows the acquisition of fully quantitative data, not only for the larger inclusions within the ceramics but also for the typically finer-grained groundmass/matrix, whilst also providing the overall texture of the ceramic.     

Selinunte (Sicily) and its productive context: the clayey raw materials applied in a long-lived ceramic production (seventh to third century BCE)

The westernmost of the Greek-Sicilian towns, Selinunte, founded in western Sicily during the second half of the seventh century BCE, gives amazing evidences of a historic activity of ceramic production (seventh to third century BCE). The present study aims to identify the raw materials available in the vicinity of the archaeological site of Selinunte, which were possibly used by the ancient potters, and to characterise them by means of petrographic and chemical techniques. A sampling campaign of clays and sands for tempering was undertaken in the archaeological site and the adjacent area. Moreover, locally produced archaeological bricks and tiles were considered helpful for comparison regarding the definition of local ceramic macro- and micro-fabrics and were analysed as well. The comparison between textural, mineralogical and chemical data allowed us to highlight a good similarity between the clayey materials available in the area and the local ancient bricks and tiles. Their compositional resemblance suggests the hypothesis of a systematic use of the studied clays for ceramic productions from the Archaic to the Hellenistic period. The preliminary archaeometric results obtained so far could enhance the distinction between local manufactures and imports and may well lead to the identification of ceramic artefacts produced by the Archaic-Hellenistic workshops of Selinunte at various consumption sites.