Roman marble from Lusitania: petrographic and geochemical characterisation

This paper reports the results of an archaeometric study of the marble from the Estremoz Anticline, Portugal. Thirty-four samples from eleven different locations were analysed petrographically. In addition, ten samples were selected for trace element and strontium isotopic analysis. The sampling was aimed at obtaining material from known ancient quarries and at establishing the overall petrographic and geochemical variation of the marble from the Estremoz Anticline. The main type of marble in Estremoz is a white(-veined), calcitic marble with an average maximum grain size between 0.81 and 3.50 mm. ⁸⁷Sr/⁸⁶Sr values of marble leachates range from 0.70850 to 0.70891 and are similar to the results for other Palaeozoic marbles of the Iberian Peninsula.     

ON THE WHITE AND COLOURED MARBLES OF THE ROMAN TOWN OF CUICUL (DJEMILA,ALGERIA)

This paper reports the results of an archaeometric study of the local and imported marbles found in the Roman town of Cuicul (now Djemila, Algeria), a research project funded by the Sixth Framework Programme of the European Union. Of the few imported coloured lithotypes that have been found, four are of Greek origin and one was imported from Asia Minor. In addition, two other classical Roman coloured stones found on the site are probably of local North African origin (most likely one from Numidia and one from Algeria). With regard to the grey and white marbles employed in the statuary and architecture, petrographic study in thin section and the δ¹³C and δ¹⁸O isotopic data emphasize the frequent use of the local fine‐grained lithotype from Filfila (Skikda) together with imported Greek lithotypes (i.e., Pentelic marble, the dolomitic variety of Thasian marble, and Parian marble from Lakkoi) as well as different varieties of the so‐called ‘greco scritto’, whose provenance in some cases still remains uncertain. In fact, the petrographic and geochemical features of the marbles do not always match those known for the classical ‘greco scritto’ from the quarry of Cap de Garde, near Annaba (Algeria).     

A Multi‐Method Database of the Black and White Marbles of Göktepe (Aphrodisias), Including Isotopic,EPR, Trace and Petrographic Data

A database of the ancient marbles of Göktepe near Aphrodisias is reported, and includes 160 white, black and bichrome samples from 13 quarries and two waste deposits. The quarries are grouped into four districts. Districts 1 and 2, to the north, produced exclusively black or dark grey marbles (nero antico). Districts 3 and 4 produced white statuary marble. Nero antico and a black and white stone were also quarried in district 4, where the black marble surfaces again. The samples were characterized using petrography, isotopic analysis, EPR spectroscopy and trace analysis. The Göktepe white exhibits an unparalleled combination of fine grain, low EPR intensity and high strontium concentration that often allows easy identification. The isotopic values are less distinctive and similar to those for Carrara. In most cases, however, they are tightly grouped and also quite indicative. The black marbles exhibit a much weaker metamorphic overprint. With respect to the white marbles, they show analytical similarities but also notable differences. Therefore, establishing their provenance can be more difficult and may require the support of petrographic analysis. The results suggest that the Göktepe marbles were among the most prized and widespread statuary marbles used in Roman times, particularly from the early second century ad onwards.     

THE PROPERTIES AND IDENTIFICATION OF MARBLE FROM PROCONNESOS (MARMARA ISLAND,TURKEY): A NEW DATABASE INCLUDING ISOTOPIC,EPR AND PETROGRAPHIC DATA*

This paper reports an updated and enlarged archaeometric database of Proconnesos marbles with the aim of attaining more reliable inter‐ and intra‐site identification. Quarry and artefact samples (n = 397) from 23 different quarrying areas were characterized using petrographic, isotopic and EPR results. The most distinct property of Proconnesos marbles is their extremely weak EPR intensity, associated with the low concentration of Mn²⁺impurities. This feature, supported by the contribution of other important isotopic and petrographic variables, forms the basis for the correct identification of Proconnesos marbles. Within the site the distribution of properties is relatively homogeneous; only limited intra‐site discrimination is possible. All the experimental results, as well as the quarry samples are made available to other researchers willing to measure additional experimental properties, thus increasing the rate of within the site discrimination. Extensive survey has proved that, although about 10% of the samples exhibit maximum grain size below 1.0 mm, no locations exist where fine grained marbles could be intentionally quarried. The historical aspects of Proconnesos marble quarrying and usage are also discussed.     

WHITE,VEINED MARBLE FROM ROMAN AMMAIA (PORTUGAL): PROVENANCE AND USE

A multimethod approach using petrography and strontium (Sr) isotopic analysis was applied to determine the geological source of 17 marble artefacts from the Roman town of Ammaia (Portugal). All samples are calcitic, with dolomite, quartz and muscovite as accessory minerals. The marbles are characteristically medium‐grained with a maximum grain size (MGS) between 0.98 mm and 1.82 mm, have a heteroblastic texture, and have curved to embayed calcite grain boundaries. ⁸⁷Sr/⁸⁶Sr values of marble leachates range from 0.708488 to 0.708639. Comparison with Hispanic and Mediterranean marbles suggests the Estremoz Anticline as the most likely source for the Ammaia marble, especially for architectural marble. This hypothesis is supported by the geographical proximity of the Estremoz marble district and the long and expensive overland transport required for other marbles to reach Ammaia.     

CARBON AND OXYGEN ISOTOPIC RATIOS: A DATA BASE FOR CLASSICAL GREEK AND ROMAN MARBLE

An isotopic data base of δ¹³C and δ¹⁸O analyses of 528 samples collected from 39 classical Greek and Roman quarries of Turkey, Greece, Italy and Tunisia has been accumulated. The discriminative possibilities of the data base vary from quarry to quarry. Most quarries have a distinctive pattern for either or both variables, but some have more than one grouping. The data also overlap for many quarries preventing a unique provenance assignment. If the alternatives are known so that the total pool of possible sources is reduced, the data base can then discriminate and assign a provenance for most classical marble artifacts.     

A NEW METHOD FOR THE DETERMINATION OF THE PROVENANCE OF WHITE MARBLES BY CHEMICAL ANALYSIS OF INCLUSION FLUIDS: THE MARBLES OF THE MAUSOLEUM OF BELEVI/TURKEY*

A new method is presented in this paper to pinpoint the origin of white marbles using the chemical analysis of fluids occurring as micro-inclusions in calcitic or dolomitic marbles. Beside the conventional methods usually applied for this purpose, the analyses of significant anions and cations in fluids extracted from white marbles were used to characterize different types of marbles. Using this new approach it is possible to distinguish different groups of marbles which cannot be separated isotopically. A case study was performed on the mausoleum of Belevi, close to Ephesus in Turkey, and the quarries in the area of the mausoleum. The marbles used for the architecture of the mausoleum cannot be distinguished isotopically but were split into two groups when using fluid inclusion analysis. The corresponding quarry for the high-quality marble (cella walls, columns etc.) turned out to be the Kentli Çiftliği quarry, which also supplied the marbles for the classical Artemision. According to the chemical and fluid data it can be shown, however, that neither the adjacent famous antique quarry of Belevi nor the underground mine of Kusini, some 5 km away from the mausoleum, are the sources for the marbles used for the construction or decoration of the mausoleum.     

Multi-isotope fingerprints (O,Sr and Pb) in archaeological animal bone bioapatite: Similarity search and the suitability for provenance analysis in a geologically complex Alpine region

Multi-isotope fingerprints in the bioapatite of archaeological skeletons are mostly superior over single isotope analyses for provenance studies. Gaussian mixture model (GMM) clustering is a novel tool for a similarity search among multidimensional data sets and at the same time permits the evaluation of the structural importance of particular isotopic ratios in the data set. We applied three GMM clustering experiments on multi-isotope fingerprints—stable strontium (Sr), lead (Pb) and oxygen (O) isotopic ratios—established in 217 archaeological animal bones excavated along a specific transect across the European Alps. This reference region had been in use since prehistoric times by humans who crossed the Alps from north to south, and vice versa. The resulting clusters permit a spatial assignment of the specimens with a very high probability, in particular with regard to the geological complexity of the region. A combination of Sr with Pb stable isotopes led to an optimal differentiation between the southern and northern Alpine forelands that cannot be distinguished from each other by ⁸⁷Sr/⁸⁶Sr ratios alone, while the contribution of δ¹⁸O is not particularly high. The isotopic mapping and subsequent cluster analysis is suitable for the analysis of archaeological human finds and the reconstruction of the direction of transalpine mobility and trade.     

Ancient ‘Black’ Decorative Stones and the Ephesian Origin of Sculptural bigio antico

Isotopic, EPR and petrographic studies aimed at establishing the provenance of sculptural bigio antico are reported, including 18 possible quarry sites and 21 ancient sculptures. The results demonstrate that the Belevi quarry, north‐east of Ephesos, above the more famous white marble quarry, was the major source of this marble. Nineteen artefacts belong to Belevi, whereas the precise origin of the remaining two is unknown, but must probably be found within the same area. The peculiar distribution of δ¹³C values both for Belevi and artefacts was crucial for inferring the correct provenance, subsequently confirmed by additional analytical and petrographic data.     

NMR as a new tool for cultural heritage application: The provenance of ancient white marbles

Identifying the origin of marble used in antiquity brings back to light details of the economic, social and political organization of classical societies, and characterizing in depth the chemistry of marble is key to discovering its provenance. Beyond X‐ray diffraction, which could reveal the presence of discriminant secondary crystalline phases and the quantification of accessory minerals combined with a multivariate analysis approach, solid‐state nuclear magnetic resonance (NMR) enables one to recognize the local structure arrangement of both crystalline and amorphous materials by looking at one or more selected atoms. In present paper targets the ¹³C nuclide, and thus the major component of marble, calcium carbonate. Whatever their geological origin, marbles ¹³C‐NMR spectra present only one resonance corresponding to the carboxyl function whose intensity and line width vary from one marble to another. If the variation of the NMR signal intensity observed is the result of great T1 variations (from 220 to 5300 s) and is linked to iron content, the line width reflects defects in the calcite crystal in which calcium has been replaced by another element such as magnesium, aluminium or strontium. The specific profile of the NMR signal has been used successfully to help determine the origin of some archaeological items.     

INVESTIGATION OF ELECTRON PARAMAGNETIC RESONANCE PEAKS IN SOME POWDERED GREEK WHITE MARBLES*

Within the context of white marble provenance research, 42 powdered white Greek marbles have been characterized using electron paramagnetic resonance (EPR) spectroscopy. Phase analysis was first carried out to separate calcitic and dolomitic marbles, then EPR spectra of Mnuc were studied. Investigation of other marble EPR spectra, especially around g — 2.00, led us to characterize five different signals. The intensities of Mn²⁺ lines permit the separatum of eight quarries into two groups, allowing a first discrimination, in the g = 2,00 region, only one signal has been found to be useful for provenance research objectives. The results are cheering and should lead to many other similar experiments.     

CARBON AND OXYGEN ISOTOPE RATIOS OF MARBLES FROM SOME ANCIENT QUARRIES OF WESTERN ANATOLIA AND THEIR ARCHAEOLOGICAL SIGNIFICANCE

¹³C/¹²C and ¹⁸O/¹⁶O ratios have been measured for 42 marbles from the main quarry localities of archaeological interest of Western Anatolia (Marmara, Ephesos, Aphrodisias, Denizli and Afyon) in order to test the possibility of isotopically characterizing ancient marbles from this region. The various groups of samples are not clearly distinguishable on a δ¹³C-δ¹⁸O diagram. However, if only white or slightly coloured samples are considered, the isotopic method appears to be much more selective.     

AN UPDATED,MULTI‐METHOD DATABASE OF EPHESOS MARBLES,INCLUDING WHITE,GRECO SCRITTO AND BIGIO VARIETIES*

An updated database of Ephesos marbles including 244 samples from 16 quarrying districts is reported. The unknown Greco Scritto quarries near Hasançavuslar and the Bigio marbles from the quarries of Belevi and of Mt Panayir are also presented. The paper, however, is mostly devoted to the identification of the Ephesos white marbles, whereas the problems posed by the Bigio and Greco Scritto varieties are deferred to future work. The samples have been characterized by isotopic analysis, EPR spectroscopy and additional petrographic and optical properties. Owing to the complex geology of the region, the white marbles of Ephesos exhibit rather inhomogeneous properties and are conveniently classified into four marble groups, which can be almost completely discriminated. The problem of distinguishing the Ephesos white marbles from other similar varieties has been dealt with by statistically comparing the Ephesos samples with all the similar, medium‐grained varieties present in the marble database. Although some of the four Ephesos groups can be reliably identified, general solution of the discriminant problem is difficult. Historical archaeological information is needed to reduce the complexity of the problem by eliminating unlikely provenances. In this way relevant problems, such as the discrimination between Ephesos and Proconnesos marbles, can be solved.     

The Asiatic marbles of the Hadrian's Villa at Tivoli

Multi-method provenance studies, including petrographic, isotopic, electron paramagnetic resonance and trace chemical analyses, have been carried out on 20 white, 9 black and 1 red artifacts purposely selected to investigate the use and distribution of sculptural marbles at the Hadrian's Villa. A large fraction of the marbles tested (21 samples, 70%) are shown to be from Asia Minor, mostly originating from the recently discovered site of Göktepe near Aphrodisias (15 or 71%). All the 9 black samples investigated and 6 out of 11 white Asiatic marbles are from Göktepe, the remaining being Docimium marble from Iscehisar (4 samples) and Aphrodisias marble from the city quarries (1 sample). The single red sculpture tested proved to be Carian red marble from the Iasos quarries, whereas non-Asiatic marbles include 3 Carrara and 6 Pentelicon samples. The selection of marbles tested is preliminary and incomplete, but, despite this, the results are noteworthy, especially since the marble of other sculptures from the Villa has already been identified as Göktepe. Together with other published results, the marble distribution at the Hadrian's Villa seems to suggest that the use of sculptural marbles in the Roman world underwent considerable changes around the turn of the 1st and the 2nd century AD. The evidence supporting this hypothesis is briefly summarized in the conclusions.     

Provenance of marble sculptures and artifacts from the so-called Canopus and other buildings of “Villa Adriana” (Hadrian's villa – Tivoli,Italy)

The results of a minero-petrographic and isotopic study carried out on the marbles of statues and architectural elements belonging to several buildings on the “Hadrian's Villa” site (the so-called Canopus, the Peschiera, the Sala dei Pilastri Dorici and the Serapeum) are presented here as part of an ongoing archaeometric project which considers the determination of the provenance of all the marble decorations of the Villa complex. Analytical data indicate the prevailing presence of marmor lunense and the use of Pentelic and Thasian marbles for architectural elements in a few parts of the Sala dei Pilastri Dorici, the Peschiera and the Serapeum; no significant use is made of Proconnesian marble, probably the most inexpensive of the time. Analysis of sculptures from the Canopus showed that those of the Tiber and Nile gods were made of Parian marble, the Caryatids and Telamons of Pentelic marble and the Amazons of the precious white Dokymaean marble.     

Innovative application of portable X-ray fluorescence (XRF) to identify Göktepe white marble artifacts

An efficient and non-destructive method to classify white marble artifacts by using a hand-held, portable XRF analyzer (pXRF) is here reported. The identification is based on the uniquely high strontium content of this marble and has been verified by testing 32 artifacts, most of which had already been provenanced, using conventional micro-destructive analyses. Besides strontium, other potential provenance indicators, such as manganese and iron, were analyzed and their concentration values obtained after empirical calibration of the instrument by using 17 quarry samples of known composition. The results show that Göktepe/non-Göktepe discrimination is almost always possible (30 artifacts) and that additional analyses are required only when the Sr value is at the lower edge of the Göktepe field (2 artifacts). The success of the method, however, resides in the particular composition relative to trace elements of Göktepe and is not easily extended to other marble varieties. Main reasons are related to insufficient accuracy at low concentration values, intrinsic trace variability of marble artifacts, surface effects that may produce not representative results. Interest in the method therefore is tightly linked to the exceptional importance of Göktepe as a sculptural marble, in which case, detailed data, obtained with a fast and totally non-destructive method, may provide relevant information concerning chronology, workshops, and places of production of the artifacts.     

A PRELIMINARY EVALUATION OF CHEMICAL DATA (TRACE ELEMENT) FROM CLASSICAL MARBLE QUARRIES IN THE MEDITERRANEAN

Minor and trace elements (K, Sr, Ba, Al, Fe, Mn, Si, Ti) have been measured in marbles from classical mediterranean quarries (Afyon, Denizli, Aphrodisias, Ephesus, Marmara and Carrara). A distinctive characterization of the classical marble sources by means of such chemical parameters seems very difficult, although some distinctions can be attempted between a few different areas and zones, within an area.     

AN EPR AND ISOTOPIC STUDY OF THE MARBLES OF THE TRAJAN's ARCH AT ANCONA: AN EXAMPLE OF ALLEGED HYMETTIAN PROVENANCE*

The provenance of 20 marble samples drawn from the Trajan's arch at Ancona, which is supposed to be made of Greek, Hymettian marble, has been established on the basis of the independent use of EPR and isotopic data. The results of the two methods are in good agreement and unequivocally indicate a Proconnesian provenance. Sixteen samples are assigned to this site, whereas two are classified as untypical Proconnesian samples and the remaining two are assigned an unlikely Parian provenance. No indication exists for a possible Hymettian origin of the marbles. A multi‐method approach, which employs all of the experimental variables simultaneously, demonstrates that the 18 samples identified as Proconnesian belong to several different quarrying areas within the site. This result is taken as an indication that the Proconnesian quarries were run following a highly organized, semi‐industrial production model. The origin of the Hymettian/Proconnesian misunderstanding and the possible misclassification of other Roman monuments in Italy are briefly commented on.     

87Sr/86Sr: a New Discriminant for Provenancing Neolithic Porcellanite Artifacts from Ireland

Antrim porcellanite (thermally metamorphosed Tertiary laterite) was the most common raw material used in the production of stone implements during the Neolithic in Ireland and was worked at two localities in North Antrim: Tievebulliagh, near Cushendall and Brockley on Rathlin Island.Attempts have been made to provenance material from these two known sources, the most successful to date being the use of geochemical data (Sr and Yppm). Here we present a new geochemical discriminant—Sr isotopic data—which reveal that Tievebulliagh and Brockley porcellanites are distinctive. Present-day⁸⁷Sr/⁸⁶Sr ratios form two discrete groupings ranging from 0·705894±25–0·706443±24 at Tievebulliagh and 0·704088±27–0·704587±25 at Brockley. A coherent relationship between⁸⁷Sr/⁸⁶Sr and Sr (ppm) reiterates the use of Sr content as a discriminant and illustrates the geochemical variability of Sr between these two sources.Although this is a destructive technique,⁸⁷Sr/⁸⁶Sr represents the best discriminant to date for Antrim porcellanites and will enable definitive provenancing of porcellanite artifacts from Ireland with important archaeological implications.     

Strontium Isotopes in the Investigation of Early Glass Production: Byzantine and Early Islamic Glass from the Near East*

⁸⁷Sr/⁸⁶Sr ratios have been determined for glasses from four production sites, dated to between the sixth and the 11th centuries, in the Eastern Mediterranean region. On the basis of elemental analyses, the glasses at each location are believed to have been melted from different raw materials. Two glass groups, from Bet Eli‘ezer and Bet She‘an, in Israel, are believed to have been based upon mixtures of Levantine coastal sands and natron, and have ⁸⁷Sr/⁸⁶Sr ratios close to 0.7090, plus high elemental strontium, confirming a high concentration of modern marine shell (⁸⁷Sr/⁸⁶Sr ~ 0.7092) in the raw materials. The isotopic compositions of these two groups of glasses differ slightly, however, probably reflecting a varying ratio of limestone to shell because the sands that were utilized were from different coastal locations. Natron‐based glasses from a workshop at Tel el Ashmunein, Middle Egypt, have ⁸⁷Sr/⁸⁶Sr values of 0.70794–0.70798, and low elemental strontium, consistent with the use of limestone or limestone‐rich sand in the batch. High‐magnesia glasses based on plant ash, from Banias, Israel, have ⁸⁷Sr/⁸⁶Sr values of 0.70772–0.70780, probably reflecting the isotopic composition of the soils that were parental to the plants that were ashed to make the glass. Strontium and its isotopes offer an approach to identifying both the raw materials and the origins of ancient glasses, and are a potentially powerful tool in their interpretation.