Br/Cl signature of hydrothermal fluids: liquid–vapour fractionation of bromine revisited

Br/Cl ratios of hydrothermal fluids are widely used as geochemical tracers in marine hydrothermal systems to prove fluid phase separation processes. However, previous results of the liquid–vapour fractionation of bromine are ambiguous. Here we report new experimental results of the liquid–vapour fractionation of bromine in the system H₂O–NaCl–NaBr at 380–450°C and 22.9–41.7 MPa. Our data indicate that bromine is generally more enriched than chlorine in the liquid phase. Calculated exchange coefficients K_D(Br‐Cl)^{liquid‐vapour} for the reaction Br^vapour + Cl^liquid = Br^liquid + Cl^vapour are between 0.94 ± 0.08 and 1.66 ± 0.14 within the investigated P–T range. They correlate positively with D_Cl^{liquid‐vapour} and suggest increasing bromine–chlorine fractionation with increasing opening of the liquid–vapour solvus, i.e. increasing distance to the critical curve in the H₂O–NaCl system. An empirical fit of the form K_D(Br‐Cl)^{liquid‐vapour} = a*ln[b*(D_Cl^{liquid‐vapour}?1) + e^1/a] yields a = 0.349 and b = 1.697. Based on this empirical fit and the well‐constrained phase relations in the H₂O–NaCl system we calculated the effect of fluid phase separation on the Br/Cl signature of a hydrothermal fluid with initial seawater composition for closed and open adiabatic ascents along the 4.5 and 4.8 J g^?1 K^?1 isentropes. The calculations indicate that fluid phase separation can significantly alter the Br/Cl ratio in hydrothermal fluids. The predicted Br/Cl evolutions are in accord with the Br/Cl signatures in low‐salinity vent fluids from the 9 to 10°N East Pacific Rise.     

Hydrothermal control on organic matter alteration and illite precipitation, Mt Isa Basin, Australia

Abundant illite precipitation in Proterozoic rocks from Northern Lawn Hill Platform, Mt Isa Basin, Australia, occurred in organic matter‐rich black shales rather than in sandstones, siltstones and organic matter‐poor shales. Sandstones and siltstones acted as impermeable rocks, as early diagenetic quartz and carbonate minerals reduced the porosity–permeability. Scanning and transmission electron microscopy (SEM and TEM) studies indicate a relation between creation of microporosity–permeability and organic matter alteration, suitable for subsequent mineral precipitation. K–Ar data indicate that organic matter alteration and the subsequent illite precipitation within the organic matter occurred during the regional hydrothermal event at 1172 ± 50 (2σ) Ma. Hot circulating fluids are considered to be responsible for organic matter alteration, migration and removal of volatile hydrocarbon, and consequently porosity–permeability creation. Those rocks lacking sufficient porosity–permeability, such as sandstones, siltstones and organic matter poor shales, may not have been affected by fluid movement. In hydrothermal systems, shales and mudstones may not be impermeable as usually assumed because of hydrocarbons being rapidly removed by fluid, even with relatively low total organic carbon.     

Modelling the Lost City hydrothermal field: influence of topography and permeability structure

The Lost City hydrothermal field (LCHF) is hosted in serpentinite at the crest of the Atlantis Massif, an oceanic core complex close to the mid‐Atlantic Ridge. It is remarkable for its longevity and for venting low‐temperature (40–91°C) alkaline fluids rich in hydrogen and methane. IODP Hole U1309D, 5 km north of the LCHF, penetrated 1415 m of gabbroic rocks and contains a near‐conductive thermal gradient close to 100°C km^?1. This is remarkable so close to an active hydrothermal field. We present hydrothermal modelling using a topographic profile through the vent field and IODP site U1309. Long‐lived circulation with vent temperatures similar to the LCHF can be sustained at moderate permeabilities of 10^?14 to 10^?15 m² with a basal heatflow of 0.22 W m^?2. Seafloor topography is an important control, with vents tending to form and remain in higher topography. Models with a uniform permeability throughout the Massif cannot simultaneously maintain circulation at the LCHF and the near‐conductive gradient in the borehole, where permeabilities <10^?16 m² are required. A steeply dipping permeability discontinuity between the LCHF and the drill hole is required to stabilize venting at the summit of the massif by creating a lateral conductive boundary layer. The discontinuity needs to be close to the vent site, supporting previous inferences that high permeability is most likely produced by faulting related to the transform fault. Rapid increases in modelled fluid temperatures with depth beneath the vent agree with previous estimates of reaction temperature based on geochemical modelling.     

Retrograde P–T evolution and high temperature–low pressure fluid circulation in relation to late Hercynian intrusions: a mineralogical and fluid inclusion study of the Charroux-Civray plutonic complex (north-western Massif Central, France)

The calc‐alkaline plutonic complex from Charroux‐Civray (north‐western part of the French Massif Central) displays multiphase hydrothermal alteration. Plutonic rocks, as well as early retrograde Ca–Al silicate assemblages, which have crystallized during cooling and uplifting of the plutonic series, are affected by multiphase chlorite–phengite–illite–carbonate alteration linked to intense pervasive fluid circulation through microfractures. The petrographic study of alteration sequences and their associated fluid inclusions in microfissures of the plutonic rocks, as well as in mineral fillings of the veins, yields a reconstruction of the P–T–X evolution of the Hercynian basement after the crystallization of the main calc‐alkaline plutonic bodies. This reconstruction covers the uplift of the basement to its exposure and the subsequent burial by Mesozoic sediments. Cooling of the calc‐alkaline plutonic series started at solidus temperatures (～650°C), at a pressure of about 4 kbar (1 bar = 10⁵ N m^?2), as indicated by magmatic epidote stability, hornblende barometry and fluid inclusion data. Cooling continued under slightly decreasing pressure during uplift down to 2–3 kbar at 200–280°C (prehnite–pumpellyite paragenesis). Then, a hot geothermal circulation of CO₂‐bearing fluids was induced within the calc‐alkaline rocks leading to the formation of greisen‐like mineralizations. During this stage, temperatures around 400–450°C were still high for the inferred depths (～2 kbar). They imply abnormal heat flows and thermal gradients of 60–80°C km^?1. The hypothesis of the existence of one large or a succession of smaller peraluminous plutons at depth, supported by geophysical data, suggests that localized heat flows were linked to concealed leucogranite intrusions. As uplift continued, greisen mineralization was subsequently affected by the chlorite–phengite–dolomite assemblage, correlated with aqueous and nitrogen‐bearing fluid circulations in the temperature range of 400–450°C. In a later stage, a continuous temperature decrease at constant pressure (～0.5 kbar) led to the alteration of the dolomite–illite–chlorite type in the 130–250°C temperature range.     

Invasion of a karst aquifer by hydrothermal fluids: evidence from stable isotopic compositions of cave mineralization

Mineral deposits in the Cupp‐Coutunn/Promeszutochnaya cave system (Turkmenia, central Asia) record a phase of hydrothermal activity within a pre‐existing karstic groundwater conduit system. Hydrothermal fluids entered the caves through fault zones and deposited sulphate, sulphide and carbonate minerals under phreatic conditions. Locally, intense alteration of limestone wall rocks also occurred at this stage. Elsewhere in the region, similar faults contain economic quantities of galena and elemental sulphur mineralization. Comparisons between the Pb and S isotope compositions of minerals found in cave and ore deposits confirm the link between economic mineralization and hydrothermal activity at Cupp‐Coutunn. The predominance of sulphate mineralization in Cupp‐Coutunn implies that the fluids were more oxidized in the higher permeability zone associated with the karst aquifer. A slight increase in the δ³⁴S of sulphate minerals and a corresponding δ³⁴S decrease in sulphides suggest that partial isotopic equilibration occurred during oxidation. Carbonate minerals indicate that the hydrothermal fluid was enriched in ¹⁸O (δ¹⁸O_SMOW ～ + 10‰) relative to meteoric groundwater and seawater. Estimated values for δ¹³C_DIC (δ¹³C_PDB ～ ? 13‰) are consistent with compositions expected for dissolved inorganic carbon (DIC) derived from the products of thermal decomposition of organic matter and dissolution of marine carbonate. Values derived for δ¹³C_DIC and δ¹⁸O_water indicate that the hydrothermal fluid was of basinal brine origin, generated by extensive water–rock interaction. Following the hydrothermal phase, speleothemic minerals were precipitated under vadose conditions. Speleothemic sulphates show a bimodal sulphur isotope distribution. One group has compositions similar to the hydrothermal sulphates, whilst the second group is characterized by higher δ³⁴S values. This latter group may either record the effects of microbial sulphate reduction, or reflect the introduction of sulphate‐rich groundwater generated by the dissolution of overlying evaporites. Oxygen isotope compositions show that calcite speleothems were precipitated from nonthermal groundwater of meteoric origin. Carbonate speleothems are relatively enriched in ¹³C compared to most cave deposits, but can be explained by normal speleothem‐forming processes under thin, arid‐zone soils dominated by C4 vegetation. However, the presence of sulphate speleothems, with isotopic compositions indicative of the oxidation of hydrothermal sulphide, implies that CO₂ derived by reaction of limestone with sulphuric acid (‘condensation corrosion’) contributed to the formation of ¹³C‐enriched speleothem deposits.     

Oscillatory zoning and trace element incorporation in hydrothermal minerals: insights from calcite growth experiments

Oscillatory zoning and fine‐scale variations in trace element chemistry are commonly observed in hydrothermal minerals. It has been suggested that fine‐scale chemical variations are caused by extrinsic changes in the parent hydrothermal system, such as varying fluid composition, pressure or temperature, as well as changes in mineral growth rate. In this study, LA–ICP–MS (laser ablation, inductively coupled plasma mass spectrometer) analyses were carried out on calcite crystals grown in Ca–NH₃–Cl solutions doped with rare earth elements (REE). The variety of crystal morphologies observed (euhedral to acicular), likely relate to variations in trace element abundance and calcite supersaturation state. Crystals display oscillatory and sector zoning, with significant variations in REE concentrations among zones. Cyclic variations in REE concentrations (exceeding 10‐fold) occur over distances of <1 mm along the growth direction of acicular calcite crystals. In general, trace element concentrations decrease during progressive crystal growth, implying that the concentration of trace and REEs within crystals reflects the overall composition of the growth solution. However, bulk changes in crystal composition are modulated by fine‐scale (<1 mm) variations, which are inferred to be caused by growth‐rate‐controlled incorporation of trace elements. These results have important implications for using hydrothermal minerals to infer fluctuations in fluid compositions in ancient, exhumed hydrothermal systems.     

Fluid mixing induced by hydrothermal activity in the ordovician carbonates in Tarim Basin,China

Permian hydrothermal activity in the Tarim Basin may have been responsible for the invasion of hot brines into Ordovician carbonate reservoirs. Studies have been undertaken to explain the origin and geochemical characteristics of the diagenetic fluid present during this hydrothermal event although there is no consensus on it. We present a genetic model resulting from the study of δ¹³C, δ¹⁸O, δ³⁴S, and ⁸⁷Sr/⁸⁶Sr isotope values and fluid inclusions (FIs) from fracture‐ and vug‐filling calcite, saddle dolomite, fluorite, barite, quartz, and anhydrite from Ordovician outcrops in northwest (NW) Tarim Basin and subsurface cores in Central Tarim Basin. The presence of hydrothermal fluid was confirmed by minerals with fluid inclusion homogenization temperatures being >10°C higher than the paleo‐formation burial temperatures both in the NW Tarim and in the Central Tarim areas. The mixing of hot (>200°C), high‐salinity (>24 wt% NaCl), ⁸⁷Sr‐rich (up to 0.7104) hydrothermal fluid with cool (60–100°C), low‐salinity (0 to 3.5 wt% NaCl), also ⁸⁷Sr‐rich (up to 0.7010) meteoric water in the Ordovician unit was supported by the salinity of fluid inclusions, and δ¹³C, δ¹⁸O, and ⁸⁷Sr/⁸⁶Sr isotopic values of the diagenetic minerals. Up‐migrated hydrothermal fluids from the deeper Cambrian strata may have contributed to the hot brine with high sulfate concentrations which promoted thermochemical sulfate reduction (TSR) in the Ordovician, resulting in the formation of ¹²C‐rich (δ¹³C as low as ?13.8‰) calcite and ³⁴S‐rich (δ³⁴S values from 21.4‰ to 29.7‰) H₂S, pyrite, and elemental sulfur. Hydrothermal fluid mixing with fresh water in Ordovician strata in Tarim Basin was facilitated by deep‐seated faults and up‐reaching faults due to the pervasive Permian magmatic activity. Collectively, fluid mixing, hydrothermal dolomitization, TSR, and faulting may have locally dissolved the host carbonates and increased the reservoir porosity and permeability, which has significant implications for hydrocarbon exploration.     

Granite‐related overpressure and volatile release in the mid crust: fluidized breccias from the Cloncurry District,Australia

The source and transport regions of fluidized (transported) breccias outcrop in the Cloncurry Fe‐oxide–Cu–Au district. Discordant dykes and pipes with rounded clasts of metasedimentary calc–silicate rocks and minor felsic and mafic intrusions extend several kilometres upwards and outwards from the contact aureole of the 1530 Ma Williams Batholith into overlying schists and amphibolites. We used analytical equations for particle transport to estimate clast velocities (≥20 m sec^?1), approaching volcanic ejecta rates. An abrupt release of overpressured magmatic‐hydrothermal fluid is suggested by the localization of the base of the breccias in intensely veined contact aureoles (at around 10 km, constrained by mineral equilibria), incorporation of juvenile magmatic clasts, the scale and discordancy of the bodies, and the wide range of pressure variation (up to 150 MPa) inferred from CO₂ fluid inclusion densities and related decrepitation textures. The abundance of clasts derived from depth, rather than from the adjacent wallrocks, suggests that the pressure in the pipes was sufficient to restrict the inwards spalling of fragments from breccia walls; that is, the breccias were explosive rather than implosive, and some may have vented to the surface. At these depths, such extreme behaviour may have been achieved by release of dissolved fluids from crystallizing magma, in combination with a strongly fractured and fluid‐laden carapace, sitting under a strong, low permeability barrier. The relationship of these breccias to the Ernest Henry iron‐oxide–Cu–Au deposit suggests they may have been sources of fluids or mechanical energy for ore genesis, or alternately provided permeable pathways for later ore fluids.     

Monitoring fluid chemistry in iron oxide–copper–gold‐related metasomatic processes,eastern Mt Isa Block,Australia

Most researchers in the Proterozoic eastern Mt Isa Block, NW Queensland, Australia, favour magmatic fluid and salt sources for sodic‐(calcic) alteration and iron oxide–copper–gold mineralization. Here we compare spatial, mineralogic and stable isotope data from regional alteration assemblages with magmatic and magmatic‐hydrothermal interface rocks in order to track chemical and isotopic variations in fluid composition away from inferred fluid sources. Tightly clustered δ¹⁸O values for magnetite, quartz, feldspar and actinolite for igneous‐hosted samples reflect high temperature equilibration in the magmatic‐hydrothermal environment. In contrast, these minerals record predominantly higher δ¹⁸O values in regional alteration and Cu–Au mineralization. This dichotomy reflects partial equilibration with isotopically heavier wallrocks and slightly lower temperatures. Increases in Si concentrations of metasomatic amphiboles relative to igneous amphiboles in part reflect cooling of metasomatic fluids away from igneous rocks. Variations in X_Mg for metasomatic amphiboles indicate local wallrock controls on amphibole chemistry, while variations in X_Cl/X_OH ratios for amphiboles (at constant X_Mg) indicate variable aH₂O/aHCl ratios for metasomatic fluids. Biotite geochemistry also reflects cooling and both increases and decreases in aH₂O/aHCl for fluids away from plutonic rocks. Decreased aH₂O/aHCl ratios for metasomatic fluids reflect in part scavenging of chlorine out of meta‐evaporite sequences, although this process requires already saline fluids. Local increases in aH₂O/aHCl ratios, as well as local decreases in δ¹⁸O values for some minerals (most notably haematite and epithermal‐textured quartz), may indicate ingress of low salinity, low δ¹⁸O fluids of possible meteoric origin late in the hydrothermal history of the region. Taken together, our observations are most consistent with predominantly magmatic sources for metasomatic fluids in the eastern Mt Isa Block, but record chemical and isotopic variations along fluid flow paths that may be important in explaining some of the diversity in alteration and mineralization styles in the district.     

Long‐term stability of fracture systems and their behaviour as flow paths in uplifting granitic rocks from the Japanese orogenic field

In granitic rocks, fracture networks typically provide pathways for groundwater flow and solute transport that need to be understood to assess the long‐term performance of deep underground storage or disposal facilities such as radioactive waste repositories. However, relatively little is known about the long‐term processes of fracturing and/or the longevity of flow paths (FP) in granitic rocks distributed within orogenic belts. To clarify these issues, Japanese plutons of different ages and in situ fractures in granite at the Mizunami Underground Research Laboratory (MIU) located in central Japan were studied. Detailed structural characterization and geochemical analysis of in situ fracture fillings sampled from a depth of 300 m were carried out to clarify the relationship between fracturing and mineral infilling processes. Different plutons show identical episodes of fracturing and fracture filling, consisting of: brittle tensile fracturing, due to decreasing temperature through the ductile–brittle transition after plutonic intrusion (Stage I); relatively rapid uplifting (ca. a few mm/year) accompanied by hydrothermal water circulation, which produced uncrushed layered mineral fillings (Stage II); and a period of low‐temperature meteoric water circulation following exposure after uplift (Stage III). The parageneses of carbonate mineral fracture fillings and their carbon isotopic compositions (¹⁴C, δ¹³C) show that there were distinct episodes of carbonate mineral precipitation during the rapid uplifting of a pluton. The carbonate minerals that formed during each episode incorporated carbon from a distinct source. The evolution of fillings identified here enables development of a specific model of fracturing and persistence of fluid‐conducting systems in the plutons of the orogenic field.     

Composition and evolution of fluids during skarn development in the Monte Capanne thermal aureole,Elba Island,central Italy

We describe the chemistry of the fluids circulating during skarn formation by focusing on fluids trapped in calcsilicate minerals of the inner thermal aureole of the Late Miocene Monte Capanne intrusion of western Elba Island (central Italy). Primary, CH₄‐dominant, C‐O‐H‐S‐salt fluid inclusions formed during prograde growth of the main skarn‐forming mineral phases: grossular/andradite and vesuvianite. The variable phase ratios attest to heterogeneous entrapment of fluid, with co‐entrapment of an immiscible hydrocarbon–brine mixture. Chemical elements driving skarn metasomatism such as Na, K, Ca, S and Cl, Fe and Mn were dominantly partitioned into the circulating fluid phase. The high salinity (apparent salinity between 58 and 70 wt% NaCl eq.) and the C‐component of the fluids are interpreted as evidence for a composite origin of the skarn‐forming fluids that involves both fluids derived from the crystallizing intrusion and contributions from metamorphic devolatilization. Oxidation of a Fe‐rich brine in an environment dominated by fluctuation in pressure from lithostatic to hydrostatic conditions (maintained by active crack‐sealing) contributed to skarn development. Fluid infiltration conformed to a geothermal gradient of about 100°C km^?1, embracing the transition from high‐temperature contact metamorphism and fluid‐assisted skarn formation (at ca 600°C) to a barren hydrothermal stage (at ca 200°C).     

Spatial coupling between spilitization and carbonation of basaltic sills in SW Scottish Highlands: evidence of a mineralogical control of metamorphic fluid flow

In a geochemical and petrological analysis of overprinting episodes of fluid–rock interaction in a well‐studied metabasaltic sill in the SW Scottish Highlands, we show that syn‐deformational access of metamorphic fluids and consequent fluid–rock interaction is at least in part controlled by preexisting mineralogical variations. Lithological and structural channelling of metamorphic fluids along the axis of the Ardrishaig Anticline, SW Scottish Highlands, caused carbonation of metabasaltic sills hosted by metasedimentary rocks of the Argyll Group in the Dalradian Supergroup. Analysis of chemical and mineralogical variability across a metabasaltic sill at Port Cill Maluaig shows that carbonation at greenschist to epidote–amphibolites facies conditions caused by infiltration of H₂O‐CO₂ fluids was controlled by mineralogical variations, which were present before carbonation occurred. This variability probably reflects chemical and mineralogical changes imparted on the sill during premetamorphic spilitization. Calculation of precarbonation mineral modes reveals heterogeneous spatial distributions of epidote, amphibole, chlorite and epidote. This reflects both premetamorphic spilitization and prograde greenschist facies metamorphism prior to fluid flow. Spilitization caused albitization of primary plagioclase and spatially heterogeneous growth of epidote ± calcic amphibole ± chlorite ± quartz ± calcite. Greenschist facies metamorphism caused breakdown of primary pyroxene and continued, but spatially more homogeneous, growth of amphibole + chlorite ± quartz. These processes formed diffuse epidote‐rich patches or semi‐continuous layers. These might represent precursors of epidote segregations, which are better developed elsewhere in the SW Scottish Highlands. Chemical and field analyses of epidote reveal the evidence of local volume fluctuations associated with these concentrations of epidote. Transient permeability enhancement associated with these changes may have permitted higher fluid fluxes and therefore more extensive carbonation. This deflected metamorphic fluid such that its flow direction became more layer parallel, limiting propagation of the reaction front into the sill interior.     

A comprehensive review of hydrocarbons and genetic model of the sandstone‐hosted Dongsheng uranium deposit,Ordos Basin,China

The Dongsheng uranium deposit, the largest in situ leach uranium mine in the Ordos Basin, geometrically forms a roll‐front type deposit that is hosted in the Middle Jurassic Zhiluo Formation. The genesis of the mineralization, however, has long been a topic of great debate. Regional faults, epigenetic alterations in surface outcrops, natural oil seeps, and experimental findings support a reducing microenvironment during ore genesis. The bulk of the mineralization is coffinite. Based on thin‐section petrography, some of the coffinite is intimately intergrown with authigenic pyrite (ore‐stage pyrite) and is commonly juxtaposed with some late diagenetic sparry calcite (ore‐stage calcite) in primary pores, suggesting simultaneous precipitation. Measured homogenization temperatures of greater than 100°C from fluid inclusions indicate circulation of low‐temperature hydrothermal fluids in the ore zone. The carbon isotopic compositions of late calcite cement (δ¹³C_VPDB = ?31.0 to ?1.4‰) suggest that they were partly derived from sedimentary organic carbon, possibly from deep‐seated petroleum fluids emanating from nearby faults. Hydrogen and oxygen isotope data from kaolinite cement (δD = ?133 to ?116‰ and δ¹⁸O_SMOW = 12.6–13.8‰) indicate that the mineralizing fluids differed from magmatic and metamorphic fluids and were more depleted in D (²H) than modern regional meteoric waters. Such a strongly negative hydrogen isotopic signature suggests that there has been selective modification of δD by CH₄±H₂S±H₂ fluids. Ore‐stage pyrite lies within a very wide range of δ³⁴S (?39.2 to 26.9‰), suggesting that the pyrite has a complex origin and that bacterially mediated sulfate reduction cannot be precluded. Hydrocarbon migration and its role in uranium reduction and precipitation have here been unequivocally defined. Thus, a unifying model for uranium mineralization can be established: Early coupled bacterial uranium mineralization and hydrocarbon oxidation were followed by later recrystallization of ore phases in association with low‐temperature hydrothermal solutions under hydrocarbon‐induced reducing conditions.     

Pyrophyllite formation in the thermal aureole of a hydrothermal system in the Lower Saxony Basin,Germany

A combined clay mineralogical, fluid inclusion, and K‐Ar study of Upper Jurassic metasediments at the Gehn (Lower Saxony Basin, Germany) provides evidence for a transient hydrothermal event during Upper Cretaceous basin inversion centered on a prominent gravimetric anomaly. Kaolinite and smectite in Oxfordian pelitic parent rocks that cap a deltaic sandstone unit were locally transformed into pyrophyllite, 2M₁ illite, R3 illite–smectite, chlorite, and berthierine at the Ueffeln quarry. The pyrophyllite‐bearing metapelites lack bedding‐parallel preferred orientation of sheet silicates and experienced peak temperatures of about 260–270°C consistent with microthermometric data on quartz veins in the underlying silicified sandstones. The presence of expandable layers in illite–smectite and high Kübler Index values indicate that the thermal event was rather short‐lived. K‐Ar dating of the <0.2 μm fraction of the pyrophyllite‐bearing Ueffeln metapelite yields a maximum illitization age of 117 ± 2 Ma. Lower trapping temperatures of aqueous fluid inclusions in quartz veins and the absence of pyrophyllite in metapelites of the Frettberg quarry in a distance of about 2.5 km from the Ueffeln quarry infer maximum paleotemperatures of only 220°C. The highly localized thermal anomaly at Ueffeln suggests fault‐controlled fluid migration and heat transfer that provided a thermal aureole for pyrophyllite formation in the metapelites rather than metamorphism due to deep burial. A pH neutral hydrothermal fluid that formed by devolatilization reactions or less likely by mixing of meteoric and marine waters that interacted at depth with shales is indicated by the low salinity (3–5 wt. % NaCl equiv.) of aqueous inclusions, their coexistence with methane–carbon dioxide‐dominated gas inclusions as well as carbon, hydrogen, and oxygen isotope data. The upwelling zone of hydrothermal fluids and the thermal maximum is centered on a gravimetric anomaly interpreted as an igneous intrusion (‘Bramsche Massif’) providing the heat source for the intrabasinal hydrothermal system.     

Geological setting, nature of ore fluids and sulphur isotope geochemistry of the Fu Ning Carlin-type gold deposits, Yunnan Province, China

Carlin‐type gold deposits in southern China are present in Palaeozoic to Mesozoic siliciclastic and carbonate rocks. The border region of Yunnan, Guizhou and Guangxi Provinces contains gold deposits on the south‐western margin of the Pre‐Cambrian South China Craton in south‐eastern Yunnan Province. The Fu Ning gold deposits host epigenetic, micron‐sized disseminated gold in: (i) Middle Devonian (D₁p) black carbonaceous mudstone at the Kuzhubao gold deposit and (ii) fault breccia zones at the contact between Triassic gabbro (β ) and the Devonian mudstone (D₁p) at the Bashishan gold deposit. The deposits are associated with zones of intense deformation with enhanced permeability and porosity that focused hydrothermal fluid flow, especially where low‐angle N‐S striking thrust faults are cut by NW striking strike‐slip and/or NE striking normal faults. Major sulphide ore minerals in the Fu Ning gold deposits are pyrite, arsenopyrite, arsenic‐rich pyrite, stibnite and minor iron‐poor sphalerite. Gangue minerals are quartz, sericite, calcite, ankerite and chlorite. Hypogene ore grades range from 1 to 7 g t^?1 Au and up to 18 g t^?1 Au at the Kuzhubao gold deposit and are generally less than 3 g t^?1 Au at the Bashishan gold deposit. Sub‐microscopic gold mineralization is associated with finely disseminated arsenic‐rich pyrite in the Stage III mineral assemblage. Two types of primary fluid inclusions have been recorded: Type I liquid–vapour inclusions with moderate‐to‐high liquid/vapour ratios, and Type II inclusions containing moderate liquid/vapour ratios with CO₂ as determined from laser Raman analysis. Temperature of homogenization (T_h) data collected from these primary fluid inclusions in gold‐ore Stage III quartz ranged from 180 to 275°C at the Kuzhubao gold deposit and 210 to 330°C at the Bashishan gold deposit. Salinity results indicate that there were possibly two fluids present during gold deposition, including: (i) an early fluid with 0.8–6.5 wt.% NaCl equivalent, similar to salinity in shear‐zone‐hosted gold deposits with metamorphic derived fluids; and (ii) a late fluid with 11.8–13.4 wt.% NaCl equivalent, indicating possible derivation from connate waters and/or brine sources. CO₂ and trace CH₄ were only detected by laser Raman spectrometry in gold‐ore‐stage primary fluid inclusions. Results of sulphur isotope studies showed that δ³⁴S values for pyrite and arsenopyrite associated with gold‐ore mineralization during Stage III at the Kuzhubao and Bashishan gold deposits are isotopically similar and moderately heavy with a range from +9 to +15 per mil, and also fall into the range of δ³⁴S values reported for Carlin‐type gold deposits. Sulphur isotopes suggest that the Fu Ning gold deposits were formed from connate waters and/or basinal brines. Fluid geochemistry data from the Fu Ning gold deposits suggest a Carlin‐type genetic model, involving fluid mixing between: (i) deep CO₂‐rich metamorphic fluids, (ii) moderately saline, reduced connate waters and/or basinal brines; and (iii) evolved meteoric waters.     

Fracture mineralization and fluid flow evolution: an example from Ordovician–Devonian carbonates,southwestern Ontario,Canada

Petrography, geochemistry (stable and radiogenic isotopes), and fluid inclusion microthermometry of matrix dolomite, fracture‐filling calcite, and saddle dolomite in Ordovician to Devonian carbonates from southwestern Ontario, Canada, provide useful insights into fluid flow evolution during diagenesis. The calculated δ¹⁸O_fluid, ΣREE, and REE_SN patterns of matrix and saddle dolomite suggest diverse fluids were involved in dolomitization and/or recrystallization of dolomite. The ⁸⁷Sr/⁸⁶Sr ratios of dolomite of each succession vary from values in the range of coeval seawater to values more radiogenic than corresponding seawater, which indicate diagenetic fluids were influenced by significant water/rock interaction. High salinities (22.4–26.3 wt. % NaCl + CaCl₂) of Silurian and Ordovician dolomite–hosted fluid inclusions indicate involvement of saline waters from dissolution of Silurian evaporites. High fluid inclusion homogenization temperatures (>100°C) in all samples from Devonian to Ordovician show temperatures higher than maximum burial (60–90°C) of their host strata and suggest involvement of hydrothermal fluids in precipitation and/or recrystallization of dolomite. A thermal anomaly over the mid‐continent rift during Devonian to Mississippian time likely was the source of excess heat in the basin. Thermal buoyancy resulting from this anomaly was the driving force for migration of hydrothermal fluids through regional aquifers from the center of the Michigan Basin toward its margin. The decreasing trend of homogenization temperatures from the basin center toward its margin further supports the interpreted migration of hydrothermal fluids from the basin center toward its margin. Hydrocarbon‐bearing fluid inclusions in late‐stage Devonian to Ordovician calcite cements with high homogenization temperatures (>80°C) and their ¹³C‐depleted values (approaching ?32‰ PDB) indicate the close relationship between hydrothermal fluids and hydrocarbon migration.     

Sodic metasomatism in the Palaeoproterozoic Hotazel iron-formation, Transvaal Supergroup, South Africa: implications for fluid–rock interaction in the Kalahari manganese field

Petrological and geochemical evidence is presented on the occurrence of aegirine in the Palaeoproterozoic Hotazel iron‐formation, which hosts the giant manganese deposits of the Kalahari manganese field, South Africa. The mineral has an essentially pure Na end‐member composition and occurs sporadically in iron‐formation immediately bordering the manganese ore beds. The development of aegirine appears to have taken place due to the action of late‐infiltrating, saline hydrothermal fluids at the expense of a pre‐existing, binary quartz–hematite assemblage. It is proposed that such a process would have overprinted (and therefore post‐dated) a spatially more extensive, low‐temperature alteration event which brought about thorough carbonate leaching, oxidation and residual enrichment of metals in the Hotazel iron–manganese rocks.     

Temperature‐dependent Li isotope ratios in Appalachian Plateau and Gulf Coast Sedimentary Basin saline water

Lithium (Li) concentrations of produced water from unconventional (horizontally drilled and hydraulically fractured shale) and conventional gas wells in Devonian reservoirs in the Appalachian Plateau region of western Pennsylvania range from 0.6 to 17 mmol kg^?1, and Li isotope ratios, expressed as in δ⁷Li, range from +8.2 to +15‰. Li concentrations are as high as 40 mmol kg^?1 in produced waters from Plio‐Pleistocene through Jurassic‐aged reservoirs in the Gulf Coast Sedimentary Basin analyzed for this study, and δ⁷Li values range from about +4.2 to +16.6‰. Because of charge‐balance constraints and rock buffering, Li concentrations in saline waters from sedimentary basins throughout the world (including this study) are generally positively correlated with chloride (Cl), the dominant anion in these fluids. Li concentrations also vary with depth, although the extent of depth dependence differs among sedimentary basins. In general, Li concentrations are higher than expected from seawater or evaporation of seawater and therefore require water–mineral reactions that remove lithium from the minerals. Li isotope ratios in these produced waters vary inversely with temperature. However, calculations of temperature‐dependent fractionation of δ⁷Li between average shale δ⁷Li (?0.7‰) and water result in δ⁷Li_water that is more positive than that of most produced waters. This suggests that aqueous δ⁷Li may reflect transport of water from depth and/or reaction with rocks having δ⁷Li lighter than average shale.     

Mobilization of ore fluids during Alpine metamorphism: evidence from hydrothermal veins in the Variscan basement of Western Carpathians,Slovakia

Hydrothermal polymetallic veins of the Gemeric unit of the Western Carpathians are oriented coherently with the foliation of their low‐grade Variscan basement host. Early siderite precipitated from homogeneous NaCl‐KCl‐CaCl₂‐H₂O brines with minor CO₂, while immiscible gas–brine mixtures are indicative of the superimposed barite, quartz–tourmaline and quartz–sulphide stages. The high‐salinity aqueous fluid (18–35 wt%) found in all mineralization stages corresponds to formation water modified by interaction with crystalline basement rocks at temperatures between 140 and 300°C. High brominity (around 1000 ppm in average) resulted from evaporation and anhydrite precipitation in a Permo‐Triassic marine basin, and from secondary enrichment by dissolution of organic matter in the marine sediments at diagenetic temperatures. Sulphate depletion reflects thermogenic reduction during infiltration of the formation waters into the Variscan crystalline basement. Crystallization temperatures of the siderite fill (140–300°C) and oxygen isotope ratios of the parental fluids (4–10‰) increase towards the centre of the Gemeric cleavage fan, probably as a consequence of decreasing water/rock ratios in rock‐buffered hydrothermal systems operating during the initial stages of vein evolution. In contrast, buoyant gas–water mixtures, variable salinities and strongly fluctuating P–T parameters in the successive mineralization stages reflect transition from a closed to an open hydrothermal system and mixing of fluids from various sources. Depths of burial were 6–14 km (1.7–4.4 kbar, in a predominantly lithostatic fluid regime) during the siderite and barite sub‐stages of the north‐Gemeric veins, and up to 16 km (1.6–4.5 kbar, in a hydrostatic to lithostatic fluid regime) in the quartz–tourmaline stage of the south‐Gemeric veins. The fluid pressure decreased down to approximately 0.6 kbar during crystallization of sulphides. U‐Pb‐Th, ⁴⁰Ar/³⁹Ar and K/Ar geochronology applied to hydrothermal muscovite–phengite and monazite, as well as cleavage phyllosilicates in the adjacent basement rocks and deformed Permian conglomerates corroborated the opening of hydrothermal veins during Lower Cretaceous thrusting and their rejuvenation during Late Cretaceous sinistral transpressive shearing and extension.     

Fluids associated with hydrothermal dolomitization in St. George Group,western Newfoundland,Canada

Dolomite reservoirs are increasingly recognized as an important petroleum exploration target, although the application of a hydrothermal dolomite exploration model to these reservoirs remains controversial. The St. George Group of western Newfoundland consists of a sequence of dolomitised carbonates, with significant porosity development (up to 30%) and petroleum accumulations. Fluid inclusion microthermometry and bulk fluid leach analyses indicated that fluids responsible for matrix dolomitization (associated with intercrystalline porosity) and later saddle dolomitization are CaCl₂ ± MgCl₂ rich, high salinity (up to 26 eq. wt% NaCl) brines. Integration of fluid inclusion data with thermal maturation histories from the St. George Group show that these dolomites formed at temperatures higher than the ambient rock temperature, and are therefore hydrothermal in origin. Bulk leach analyses show that dolomitization is associated with influxes of postevaporitic brines (±Cl enriched magmatic fluids) late in the diagenetic history of these carbonates. This dolomitization is possibly Devonian in age, during a period of significant magmatic activity, extensional tectonics and development of hypersaline basins. Petrographic and geochemical similarities between Paleozoic hosted hydrothermal dolomitization in western Newfoundland, eastern Canada and the northeastern United States are consistent with a regional‐scale hydrothermal dolomitization event late in the diagenetic history of these carbonates. Geofluids (2010) 10 , 422–437