Microstructures of Building Materials from Huaca De La Luna,Peru

ABSTRACT

The microstructures of building materials from the archaeological complex of Huaca de la Luna on the northern coast of Peru is assessed for the first time by a multiscale approach. The multiscale microstructural characterization used laboratory techniques including optical microscopy, scanning electron microscopy, X-ray microtomography, and both gas and powder pycnometry. Optical microscopy revealed the presence of organic matter and shell fragments and X-ray microtomography showed differences in the sizes and connectivity of pores. The BET (N₂ gas adsorption) specific surface areas showed greater presence of clayey matrix in the mortars. No significant differences among mortars and brick fragments mineralogy were detected by X-ray diffraction, so the larger amount of fine binding matrix in the mortars suggests that they were produced blending raw material with different grain sizes. The aim of this study is to provide data that can be used for a better understanding of the Moche culture, its construction techniques, and to support conservation strategies of the archaeological heritage.     

Archaeological geophysical survey of a Prehistoric Bronze Age site in Cyprus (Alambra <Emphasis Type="Italic">Mouttes</Emphasis>)—applications and limitations

The University of Queensland Alambra Archaeological Mission (UQAAM) conducted a program of geophysical survey and archaeological excavation over four seasons from 2012 to 2016. This program has allowed this study to compile a large array of geophysical data, which has been tested against actual excavation results. By integrating the two forms of archaeological investigation, the UQAAM has been able to identify geophysical ‘signatures’ diagnostic and indicative of internal architectural features relating to the Cypriot Prehistoric Bronze Age (c2400–1750BC). This is the first time internal features have been identified using these techniques on a Middle Bronze Age site in Cyprus. The program has also identified two, and possibly four, areas of domestic settlement. This has yielded results that are of considerable value to cultural heritage managers of the site, which is experiencing development pressures. While identifying several constraints with the geophysical survey for the Prehistoric Bronze Age in Cyprus, the program has demonstrated the efficacy of a combined geophysical survey and excavation approach to sites of the Early-Middle Bronze Age period.     

EVALUATION OF BINDER/AGGREGATE RATIOS IN ARCHAEOLOGICAL LIME MORTARS WITH CARBONATE AGGREGATE: A COMPARATIVE ASSESSMENT OF CHEMICAL,MECHANICAL AND MICROSCOPIC APPROACHES*

This paper reports on the comparative evaluation of traditional and innovative methods for the investigation of mortar technology. Preliminary results of various approaches to determining the mix proportions in lime mortars with carbonate aggregate are presented. Quantitative analysis was tested on ad hoc prepared mortars of known composition containing carbonate aggregates of different origin (travertine and Bath limestone). Wet chemical methods, manual disaggregation and Digital Image Analysis of thin sections and cross‐sections stained with Alizarin Red S were tested. The advantages and drawbacks of the different approaches are discussed, and applications to the analysis of archaeological mortars and plasters are highlighted.     

Paper 5: Historic Mortars from the Coudenberg Archaeological Site: Characterization and Source of Raw Materials

Abstract

The characterization of historic mortars by means of a concise methodology of material analyses can provide crucial information with regard to the origin of the raw materials and the ancient mortar technology. For the analysis of the historic mortars of the Coudenberg archaeological site, the methodology consists of optical and scanning electron microscopy, simultaneous thermal analysis, and an acidic treatment. These analyses were carried out on a total of seventeen samples lifted from various areas in the site, in function of the building chronology resulting from a historic built investigation. The type of binder and aggregate as well as their volumetric ratio were determined.

Both binder and aggregate present distinctive features, which made it possible to identify the probable geological provenance of the raw materials. The observations are verified with available historical records regarding the construction of the main banqueting hall — the Aula Magna — and the use of raw materials such as limestone and sand for the production of lime and construction purposes.     

The prehistory of Cyprus: Problems and prospects

The archaeological record of prehistoric Cyprus is rich, diverse, well-published, and frequently enigmatic. Regarded by many as a bridge between western Asia and the Aegean, Cyprus and its past are frequently seen from scholarly perspectives prevalent in one of those two cultural areas. Its material culture, however, differs radically from that of either area. Apart from the early colonization episodes on the island (perhaps three during the pre-Neolithic and Neolithic), evidence of foreign contact remains limited until the Bronze Age (post-2500 B. C.). This study seeks to present the prehistory of Cyprus from an indigenous perspective, and to examine a series of archaeological problems that foreground Cyprus within its eastern Mediterranean context. The study begins with an overview of time, place, and the nature of fieldwork on the island, continues with a presentation and discussion of several significant issues in Cypriot prehistory (e.g., insularity, colonization, subsistence, regionalism, interaction, social complexity, economic diversity), and concludes with a brief discussion of prospects for the archaeology of Cyprus up to and beyond 2000.     

Characterisation of archaeological mortars and plasters from kyme (Turkey)

The present study focuses on the compositional characterisation of Roman, proto-Byzantine and Medieval mortars, sampled in the archaeological site of Kyme (Turkey), an Aeolian city, founded in the middle of the XI century BC by Greek populations. The mortars were studied through elemental (SEM-EDS, XRF), mineralogical (XRPD, De Astis calcimeter) and petrographic (polarised optical microscopy) analysis. The comparison between the samples allowed us to emphasise compositional differences within mortars of the same historical period.In particular, we detected the prevalent use of cocciopesto, which was used as a pozzolanic additive to create hydraulic mortars in the Roman and Byzantine period. The cocciopesto was used to improve the technological properties of an initially slaked lime. Furthermore, compositional similarities allowed us to attribute an unknown sample to the Roman period. Our study also pointed out the fact that the lower quality mortars belonged to the Medieval period. As a matter of fact, the most friable sample belonging to the Middle Ages turned out to be a mixture of clay, lime and volcanic sand.     

Characterization of Late Prehistoric Plasters and Mortars from Erimi – Laonin tou Porakou (Limassol,Cyprus)

Several plasters and mortars from the Middle Bronze Age site of Erimi – Laonin tou Porakou (Cyprus) were analysed in order to perform a technological characterization. Morphological (SEM), elemental (EDX), mineralogical (XRPD), petrographic (polarized OM, SEM–EDX), thermal (TGA) and spectroscopic (FT–IR) techniques were applied. Plasters and mortars were identified as pyrotechnological lime products, obtained using local raw materials and containing a moderate amount of spathic calcite fragments. The use of organic fibres was ascertained and a seminal use of a crumbled ceramic as additive was evidenced.     

A hypothesis on different technological solutions for outdoor and indoor Roman wall paintings

The determination of the chemical composition of different parts of wall paintings (pigments, mortars and binders) provides information about technology of preparation of an artefact. Herein, we present a multi-methodological characterisation of wall paintings from a Roman archaeological site in Cuma, focusing on differences between an indoor (domus) and outdoor fabrication (a temple, Tempio con Portico (TCP)). Both pigments, binders and mortars were studied via a combination of destructive/μ-destructive (mass spectrometry, ionic chromatography, ICP-based techniques) and non-destructive (Raman microscopy, small-angle neutron scattering (SANS) and X-ray diffraction) methodologies. Particularly, the systematic presence of dolomite only in mortars from TCP may suggest an intentional use of such limestone for the outdoor fabrication of public interest. Differences between TCP and domus are also related to the composition of the pigment binder. In particular, the detected binders (studied by LC-MS/MS and GC-MS) were proteinaceous in the case of domus (possibly egg and animal glue) and drying oils in the case of TCP. Ultimately, our multi-methodological study provides an overall picture of the material components of paintings from fabrications with different use, proposing a hypothesis on technological choices according to conservative and destination reasons.     

Compositional Analyses of Mortars from the Late Antique Site of Son Peretó (Mallorca,Balearic Islands,Spain): Archaeological Implications

The paper presents the mineralogical, petrographic and chemical analyses of mortars from an Early Christian complex found in Mallorca (Balearic Islands) and dated to between the fifth and the eighth centuries ad . We characterized several mortars found at the site, in order to gather information on the raw materials used, as well as on the technology of production, and similarities among the samples. The analyses were aimed at solving specific archaeological questions regarding the building phases of the site and, in particular, the synchronic or diachronic presence of two baptismal basins in the same Christian complex.     

A PILOT STUDY IN NON-CONTACT LASER PHOTOTHERMAL ARCHAEOMETRY OF ANCIENT STATUARY PEDESTAL STONES FROM CYPRUS

Several samples of geological stones from statuary pedestals found in various archaeological sites in Cyprus have been characterized using non-contact laser infrared photothermal radiometry. Thermal diffusivities and effective optical absorption coefficients were calculated using a one-dimensional thermal-wave model. The mean values and standard deviations were tabulated and comparisons were made with lithographic and petrographic studies of the samples. Good correlations were found, thus demonstrating that laser photothermal archaeometry is a promising methodology for the accurate, potentially non-destructive and convenient characterization of the origins of ancient stones in Cyprus and other geological and archaeological sites.     

Calcareous nannofossils in medieval mortar and mortar‐based materials: A powerful tool for provenance analysis

Calcareous nannofossils—very small‐scaled marine microfossils—occur in many archaeological materials. Foremost, these include limestones used in masonry, material which has not experienced significant modification by humans. Poorly documented are nannofossils in mortars, because the burning process of quicklime requires the heating of the raw material to > 800°C. Here we focus on calcareous nannofossils in mortar and mortar‐based samples of four medieval buildings in northern Germany. The study documents the presence of nannofossils in historic mortars. It supplies evidence for the provenance of the mortars used, thereby introducing a new tool for mortar provenance studies.     

Quality Assurance in Archaeological Survey

To have confidence in the results of an archaeological survey, whether for heritage management or research objectives, we must have some assurance that the survey was carried out to a reasonably high standard. This paper discusses the use of Quality Assurance (QA) approaches and empirical methods for estimating surveys’ effectiveness at discovering archaeological artifacts as a means for ensuring quality standards. We illustrate with the example of two surveys in Cyprus and Jordan in which resurvey, measurement of surveyor “sweep widths,” and realistic estimates of survey coverage allow us to evaluate explicitly the probability that the survey missed pottery or lithics, as well as to decide when survey has been thorough enough to warrant moving to another survey unit.     

Starch granules,dental calculus and new perspectives on ancient diet

Recent work in various parts of the world has suggested the possibility of ancient starch granules surviving and adhering to archaeological artefacts. Often this information is used to infer aspects of diet. One additional source for recovery of archaeological starch granules is dental calculus. The presence of plant food debris in dental calculus is well known but has not been not widely investigated using archaeological material. The extraction of starch granules from dental calculus represents a direct link to the consumption of starchy food by humans or animals. Using dental calculus also sidesteps many other questions still inherent in using starch granules to reconstruct aspects of ancient diet, such as the effects of diagenesis on their morphology; as the starches are trapped inside a concreted matrix they are less likely to alter over time. We used amylase digestion by a starch-specific enzyme to confirm the material as starch.     

Archaeometric Clearinghouse XX

Abstract

This article is a review of three recent monographs concerned with the later Middle Cypriote and Late Cypriote periods on Cyprus (ca. 1700–1200 B.C.). Each study focuses narrowly on archaeological, philological, or historical problems associated specifically with Cyprus or more generally with interrelations among Aegean, Cypriote, and eastern Mediterranean cultures. Oblivious to common interests, the authors reflect their own particularistic concerns: philology, toponymy, stone anchors. The three publications reviewed serve both as a framework and as a vehicle for presentation of a balanced discussion of archaeological, historical, and theoretical problems associated with Middle/Late Bronze Age Cyprus and its role in eastern Mediterranean maritime trade. In conclusion, and as an alternative, a concise synthesis of cultural and socio-historical patterns on Cyprus ca. 1700–1200 B.C. is presented.

The three volumes under review are: L. Hellbing, Alasia Problems. StudMedArch 57 (P. Åström's Förlag: Göteborg 1979); D. E. McCaslin, Stone Anchors in Antiquity: Coastal Settlements and Maritime Trade Routes in the Eastern Mediterranean. StudMedArch 61 (P. Åström's Förlag: Göteborg 1980); J. Strange, Caphtor/Keftiu, A New Investigation. Acta Theologica Danica 14 (E. J. Brill: Leiden 1980).     

Comparison of Original and Modern Mortars at the Herculaneum Archaeological Site

ABSTRACT

This paper aims to evaluate mineralogical, elemental, and thermal differences among original Roman joint mortars and those used in twentieth-century restoration campaigns taken from different areas at the Herculaneum archaeological site. The purpose is to improve the compatibility of restoration mortars. Roman and modern mortars were studied with petrography, thermal analysis and x-ray fluorescence investigations. The results indicate significant differences between the Roman and modern mortars which could facilitate the degradation process. Roman mortars, in particular, were composed of a coarser aggregate which was present in a lower ratio with binder in comparison with modern mortars.     

Investigation of lime mortars and plasters from archaeological excavations in Hippos (Israel) using Electron Paramagnetic Resonance

This study presents the preliminary results of investigation of the lime mortars and plasters from archaeological excavations in Hippos (Israel), using Electron Paramagnetic Resonance (EPR) spectroscopy. The research was conducted in order to characterize the building material and its reaction to ionizing radiation. The ancient settlement Hippos, situated on the east shore of the Sea of Galilee, functioned from the 3^rd cent. BC until it was destroyed by the earthquake in 749 AD. Lime mortars and plasters show carbonate and locally gypsum character of binder and different kind of aggregate. Samples were γ-irradiated and measured using X-band EPR spectrometer. Computer Resolution Enhancement Method was applied to the complex spectra. Some of the γ-induced EPR signals were attributed to CO₂ ^? and CO₃ ^3? paramagnetic centres. Exponential growth of the dose response curve above 1 kGy and saturation for doses above 20 kGy was observed. For doses lower than 1 kGy the dose response curve has a linear character. The presence of γ-sensitive carbonate paramagnetic centres could indicate that, after further studies, well-chosen samples of mortars and plasters might be suitable for EPR dating, assuming the centres have been sufficiently bleached during the manufacturing process.     

An ethnoarchaeological study of cooking installations in rural Uzbekistan: development of a new method for identification of fuel sources

Mud constructed cooking installations such as ovens and hearths are common in modern, pre-modern and archaeological domestic contexts in West and Central Asia. Archaeological cooking installations are primarily identified using analogy of shape and size to ethnographic installations. The study presented here establishes direct evidence to the use of fire within mud constructed cooking installations, thus providing means for reducing ambiguity in identification of archaeological cooking installations. In addition, we present here a newly developed method that enables a clear-cut distinction between wood and dung ashes used as fuel materials in many modern and archaeological domestic contexts. The study is based on an ethnoarchaeological research in rural households at the Republic of Uzbekistan that was followed by geoarchaeological analyses of installation walls, wood ash, dung ash and wood and dung standards collected in the study area. Field work included ethnographic observations, interviews with informants and temperature measurements during cooking experiments. We show that changes in the clay mineral structure due to exposure to high temperatures on the interior walls of cooking installations can be detected using FTIR (Fourier Transform Infrared) spectroscopy, providing for the first time direct evidence to the use of fire within such installations. We demonstrate that the temperature recorded by clay alteration on installation walls as well as in the ashes left on installation bottoms does not correspond to baking or cooking temperatures. We also show that the newly developed method, based on the ratio of wood ash pseudomorphs to dung spherulites, separates between wood and dung ashes with very high certainty. Yet, we identify a range of values where differentiation between wood and dung ashes is uncertain, and suggest it results from intensive mixing processes. Lastly, we show that phytolith morphotype analysis is an insufficient tool, if used alone, for distinguishing wood from dung ashes in the study area. The newly developed tools for temperature estimation within mud constructed installations and for fuel origin determination contribute to better understanding of cooking-related practices, and can be applied to archaeological contexts worldwide.     

A Multidisciplinary Approach for the Archaeometric Study of Pozzolanic Aggregate in Roman Mortars: The Case of Villa dei Quintili (Rome,Italy)

This contribution focuses on the study of historical mortars from a Roman archaeological site known as Villa dei Quintili, a monumental villa located in the south‐eastern part of Rome (Italy). The study was carried out on 38 mortar samples, collected from several edifices within the complex. A multi‐analytical approach, including polarized optical microscopy, scanning electron microscopy coupled with energy‐dispersive system and laser ablation inductively coupled plasma mass spectrometry, was used to analyse the pozzolanic material used for the preparation of mortars. Data obtained on both major and trace elements were compared with the compositions of Pozzolana Rossa, Pozzolana Nera and Pozzolanella samples from the Alban Hills volcanic district, collected from a historic quarry nearby, as well as with literature data. The results of such a multidisciplinary approach allowed us to recognize the use of all three pozzolan types for the aggregate fraction of examined mortars from the Villa dei Quintili.     

X射线显微CT成像技术在金属文物制作工艺研究与腐蚀状态评估中的应用

金属腐蚀过程不仅受环境等外部因素的影响,制作工艺、合金组成及缺陷等内部因素同样起着重要作用。为实现金属文物制作工艺和内部腐蚀状态的可视化研究,运用X射线显微CT对铜镜文物碎片以及出土、海洋出水铁质文物样品进行扫描探测,并结合X射线荧光、X射线衍射等检测手段,开展金属文物材质、工艺及矿化程度的综合分析。结果表明,在显微CT影像重建基础上,通过设定不同的阈值,可实现文物内部缺陷、腐蚀矿化程度等内部信息的测量统计。该方法可为金属文物材质、制作工艺研究和腐蚀状态评估提供无损的研究手段。