VARIETIES AND SOURCES OF ARTEFACTUAL OBSIDIAN IN THE MIDDLE STONE AGE OF THE MIDDLE AWASH,ETHIOPIA*

Recent investigation of the geochemical provenance of obsidian artefacts from spatially and temporally variable archaeological sites in Ethiopia has shown the diversity of geological sources and concomitant differences in the transport of raw material to archaeological sites, thus allowing reconstruction of the utilization of raw material by early hominids as well as recent humans. We recognize 30 compositionally different obsidians that were used at the Middle Stone Age (MSA) archaeological sites of Aduma (A8), Halibee Herto, Aladi Springs and Porc Epic in the Middle Awash region. Probable sources of nine of these obsidians are Adokoma, Ayelu, Ida'ale, Assebot, Asboli, Gira‐Ale and Kone. Many compositional types are confined to a single site, but others are shared between sites, although shared obsidians between sites more than 300 km apart are exceptional.     

PETROGRAPHY AND PROVENANCE INTERPRETATION OF THE STONE MOULDS FOR BRONZE DAGGERS FROM THE GALDONG PREHISTORIC SITE, REPUBLIC OF KOREA*

This paper presents material characteristics and raw material provenance of the stone moulds for bronze slender daggers from Galdong. This type of bronze dagger is uniquely distributed in the Korean Peninsula and these stone moulds were the first to be found by excavation. The stone moulds were made of igneous hornblendite with course-grained holocrystalline textures. Based on petrological, mineralogical and geochemical characteristics, the original rock materials of the moulds were inferred to be derived from the Jangsu or Namwon areas which are about 50 km away from the excavation site. It is a notable achievement that this provenance study confirmed the domestic production of Korean-styled daggers.     

POST-COLONIZATION INTERACTION BETWEEN VANUATU AND FIJI RECONSIDERED: THE RE-ANALYSIS OF OBSIDIAN FROM LAKEBA ISLAND, FIJI*

PIXE–PIGME analysis of 19 obsidian artefacts from Lakeba Island in east Fiji identified contact with northern Vanuatu in the post-colonization period ( c. 2500–1000 bp ) of Fiji. The Lakeba obsidian is the only physical evidence for interaction across the 850 km water gap separating the archipelagos of Vanuatu and Fiji in the first millennium ad . New research on the Vanuatu obsidian sources with laser ablation – inductively coupled plasma – mass spectrometry (LA–ICP–MS) casts serious doubt on the validity of a long-distance inter-archipelago connection in the post-Lapita era. This paper presents the re-analysis of 18 obsidian artefacts from Lakeba using LA–ICP–MS and radiogenic isotope results that demonstrate that the Lakeba obsidian is not from Vanuatu, and it most likely derives from the Fiji–Tonga region. Geochemical evidence for long-distance interaction and migration between the West and Central Pacific in the post-Lapita era has yet to be identified.     

TL DATING OF BURNT LITHICS FROM BLOMBOS CAVE (SOUTH AFRICA): FURTHER EVIDENCE FOR THE ANTIQUITY OF MODERN HUMAN BEHAVIOUR*

This paper presents the first TL dates for burnt quartzites and silcretes from the Still Bay layers of Blombos Cave (South Africa). These layers contained engraved ochres and marine shell beads that could be an early manifestation of symbolic and thus ‘modern’ behaviour by the Middle Stone Age humans. The procedure devised to calculate the ages is presented in detail, particularly with regard to internal microdosimetry, because the problems faced in estimating the dose rates require an approach different from the one usually used on flints and sediments. A mean age of 74 ± 5 ka was obtained for five burnt lithics unearthed in the BBC M1 member of the Still Bay layers. This result is in good agreement with both ESR dates on teeth and OSL dates on sediment, and demonstrates the great antiquity of the archaeological remains discovered at Blombos Cave.     

PROVENANCE STUDIES OF CHALCOLITHIC OBSIDIAN ARTEFACTS FROM NEAR LAKE URMIA, NORTHWESTERN IRAN USING WDXRF ANALYSIS

In 2005–2006 we initiated a major archaeological survey and chemical characterization study to investigate the long-term use of obsidian along the eastern shores of Lake Urmia, northwestern Iran. Previous research in the area suggested that almost all archaeological obsidian found in this area originated from the Nemrut Daĝ source located in the Lake Van region of Anatolia (Turkey). More recent research on obsidian artefacts from the Lake Urmia region has identified a significant number of obsidian artefacts with compositions different from the sources near Lake Van. This suggests that the obsidian artefacts are from a yet to be identified geological source, but possibly one that was not too distant. In order to advance our knowledge of Iranian obsidians and eventually refine provenance criteria we analysed obsidian from 22 Chalcolithic sites and some source areas. The compositions of both obsidian source samples and artefacts were determined using wave length dispersive X-ray fluorescence spectrometry (WDXRF). This paper presents results from the trace elemental analysis of both geological and archaeological obsidians, providing important new data concerning the diachronic relationship between lithic technology and raw material in the north-west of Iran.     

NON‐DESTRUCTIVE ANALYTIC METHOD USING XRF FOR DETERMINATION OF PROVENANCE OF ARCHAEOLOGICAL OBSIDIANS FROM THE MEDITERRANEAN AREA: A COMPARISON WITH TRADITIONAL XRF METHODS*

A non‐destructive analytical method using wavelength‐dispersive X‐ray fluorescence (WDXRF) that allows the establishment of the provenance of archaeological obsidians was developed and a comparison with the classical XRF method on powders is discussed. Representative obsidian samples of all the geological outcrops of archaeological interest of the Mediterranean area (Lipari, Pantelleria, Sardinia, Palmarola and the Greek islands of Melos and Gyali), were analysed with the normal procedures used in rock analysis by XRF (crushing, powdering and pelletizing). The non‐destructive XRF analysis was instead conducted on splinters taken from the original geological pieces, with the shape deliberately worked to be similar to the refuse usually found at archaeological sites. Since the analysis was conducted on the raw geological fragment, intensity ratios of the suitably selected chemical elements were used, instead of their absolute concentrations, to avoid surface effects due to the irregular shape. The comparison between concentration ratios (obtained by traditional XRF methods) and the intensity ratios of the selected trace elements (obtained from the non‐destructive methodology) show that the different domains of the chemical composition, corresponding to the geological obsidians of the source areas, are perfectly equivalent. In the same way, together with the geological splinters, complete archaeological obsidians, from Neolithic sites, may be analysed and their provenance may be determined. The proposed non‐destructive method uses the XRF method. Due to its sensitivity, low cost and high speed, it is surely an extremely valid instrument for the attribution of the provenance of the archaeological obsidian from Neolithic sites.     

GEOCHEMICAL CHARACTERIZATION OF ARCHAEOLOGICAL LIME MORTARS: PROVENANCE INPUTS*

Chemical and mineralogical analyses were carried out on historical lime mortars from the parish church of Santa María La Real (Guipúzcoa). The study included various periods ranging from Roman to modern times and allowed the identification of various types of raw materials. In order to obtain pure binder, free of carbonate aggregates and charcoal particles, an innovative binder separation method was implemented. The chemical composition of the binder allows discrimination of different provenance areas for the raw materials, although those areas do not correlate with specific historical periods. In addition, the influence of burial processes on the primeval chemical features has been assessed and reveals that modern mortars display greater chemical modification than the Roman mortars.     

NON‐DESTRUCTIVE SOURCING OF BRONZE AGE NEAR EASTERN OBSIDIAN ARTEFACTS: REDEVELOPING AND REASSESSING ELECTRON MICROPROBE ANALYSIS FOR OBSIDIAN SOURCING*

Despite predictions in the 1980s that electron microprobe analysis (EMPA) would become a popular technique for obsidian sourcing, few studies have used it with this goal, and most of them are now outdated and unrepresentative of modern EMPA. For example, Merrick and Brown (1984 ) recorded their data on punch cards. Furthermore, these studies destructively prepared artefacts for analysis. The research at hand endeavoured: (1) to establish the modern capabilities of EMPA for obsidian sourcing; and (2) to develop and evaluate procedures for non‐destructive artefact analysis. Issues such as diagenetic effects and compatibility with NAA and XRF data were also investigated.     

THE PROVENANCE OF IRON ARTEFACTS FROM MANCHING: A MULTI‐TECHNIQUE APPROACH*

Iron finds from the Celtic oppidum of Manching in southern Bavaria (Germany) are analysed in view of their possible provenance. The exceptional size and the location of Manching are usually attributed to the presence of abundant iron ores in its vicinity. After a review of previous approaches for source determination of iron artefacts, we introduce lead isotope analysis as a new approach. However, only by combining the trace element patterns of slag inclusions and iron metal with lead isotope ratios in the metal is it possible to distinguish various iron ore formations near Manching. As a result, it turns out that, indeed, the most obvious ones—namely, bog ores near the Danube—constituted the main resources for iron production at Manching. It was even possible to select one occurrence as the most likely ore source.     

PROVENANCE OF OBSIDIAN EXCAVATED FROM LATE CHALCOLITHIC LEVELS AT THE SITES OF TELL HAMOUKAR AND TELL BRAK,SYRIA*

X‐ray fluorescence and laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) analyses conducted on 40 obsidian samples from the Late Chalcolithic 2 levels at Tell Hamoukar and Tell Brak in north‐east Syria have shown trends towards the exploitation of obsidian sources in the eastern Taurus. While the Bingöl region appears to provide the majority of obsidian to both sites, there is also evidence of more minor exploitation of a source in the Lake Van area and an altogether unknown source (X). This paper presents the data acquired from the analyses of the archaeological obsidian and situates these results within their chronological and regional contexts.     

ARCHAEOLOGICAL VOLCANIC GLASS FROM THE SITE OF ROCCHICELLA (SICILY,ITALY)*

The site of Rocchicella, near Catania, in eastern Sicily, has yielded important archaeological evidence from prehistoric times to the Middle Ages. Extensive archaeological investigations of cultural layers dating from the Palaeo‐Mesolithic to the Copper Age have recently been undertaken, and volcanic glass, mainly obsidian, has been collected in the course of excavation. To determine the provenance of this volcanic glass, a non‐destructive elemental analysis was carried out to measure the concentration of characteristic trace elements. The analysis was carried out using a new XRF spectrometer equipped with a beam stability controller and a quantitative method developed at the LANDIS laboratory of the INFN–CNR Institutes of Catania. In addition to the obsidian, it was demonstrated for the first time that a local vitreous material similar to obsidian, but displaying a completely different composition, was used during all the investigated periods. This material was identified as a basaltic glass, characterized by a superficial product of devitrification called palagonite. Analysis of the obsidians has led to the identification of the island of Lipari as the provenance source. High‐ and low‐power microscopic use‐wear analysis on obsidian and basaltic glass artefacts indicated that soft wood and plant matter might have been processed at the site.     

THE PROVENANCE OF OBSIDIAN ARTEFACTS FROM THE WĀDĪ ATH‐THAYYILAH 3 NEOLITHIC SITE (EASTERN YEMEN PLATEAU) BY LA–ICP–MS

The geological sources of obsidian in the Red Sea region provide the raw material used for the production of obsidian artefacts found in prehistoric sites on both sides of the Red Sea, as far afield as Egypt, the Persian Gulf and Mesopotamia. This paper presents the chemical characterization of five obsidian geological samples and 20 prehistoric artefacts from a systematically excavated Neolithic settlement in highland Yemen. The major element concentrations were determined by SEM–EDS analysis and the trace element concentrations were analysed by the LA–ICP–MS method, an almost non‐destructive technique capable of chemically characterizing the volcanic glass. A comparison of archaeological and geological determinations allows the provenance of the obsidian used for the Neolithic artefacts to be traced to definite sources in the volcanic district of the central Yemen Plateau.     

SHAFT‐HOLE AXES FROM CAPUT ADRIAE: MINERALOGICAL AND CHEMICAL CONSTRAINTS ABOUT THE PROVENANCE OF SERPENTINITIC ARTEFACTS*

The change of raw materials used to produce stone axes during the Neolithic to Copper Age transition in northeastern Italy, central and western Slovenia and northwestern Croatia (Caput Adriae) has been recently linked to the development of early European metallurgy. Serpentinite shaft‐hole axes occur commonly in the archaeological context of this region and their rounded irregular shape suggests that the raw material was mainly sourced from secondary deposits. The aim of the present study is to characterize with multiple analytical methods, including synchrotron radiation, the axes and locate the primary outcrop(s) of raw materials and related secondary exploitation areas. All the analysed artefacts are manufactured from peridotites and probably pyroxenites completely metamorphosed in greenschist facies and characterized by antigorite, diopside and magnetite, sometimes rimmed by penninite. Mineralogical and petrographic data exclude most Eastern Alps outcrops as possible raw material sources, thus limiting the research to the Hohe Tauern. Chemical data reveal a close homogeneity for the peridotite‐derived axes and therefore demonstrate a selection of the most suitable raw material for axe production. Provenance from Hohe Tauern and related secondary deposits of the Drava River hydrographical system agrees with previous studies, as this region is rich in copper ore deposits, which have been exploited since prehistory.     

ON STATISTICAL APPROACHES TO THE STUDY OF CERAMIC ARTEFACTS USING GEOCHEMICAL AND PETROGRAPHIC DATA*

The scientific analysis of ceramics often has the aim of identifying groups of similar artefacts. Much published work focuses on analysis of data derived from geochemical or mineralogical techniques. The former is more likely to be subjected to quantitative statistical analysis. This paper examines some approaches to the statistical analysis of data arising from both kinds of techniques, including ‘mixed‐mode’ methods where both types of data are incorporated into analysis. The approaches are illustrated using data derived from 88 Late Bronze Age transport jars from Kommos, Crete. Results suggest that the mixed‐mode approach can provide additional insight into the data.     

NEW RADIOCARBON ACCELERATOR DATES ON ARTEFACTS FROM THE EARLY MESOLITHIC SITE OF STAR CARR,NORTH YORKSHIRE*

For the well‐known early Mesolithic site of Star Carr, dating of organic artefacts by accelerator mass spectrometry (AMS) has been hampered by treatment of bone and antler recovered during the original excavations with preservatives. Some, untreated, artefacts were, however, collected after Clark's excavation in 1950. Four of these artefacts were AMS dated in 1995, but two of the dates were significantly younger than the others, and were questionable due to their low collagen yields. These suspect samples have now been re‐analysed, demonstrating that all four artefacts are of similar date. The significance of these dates for the chronology of Star Carr is discussed.     

PROVENANCE STUDY OF MARBLE ARTEFACTS FROM THE ROMAN BURIAL AREA OF FASCHENDORF (CARINTHIA,AUSTRIA)*

Numerous marble artefacts were among the extraordinary findings excavated at the Roman burial area of Faschendorf (Carinthia, Austria). The provenance of marble objects, particularly in the Roman provinces, is mostly unclear. Predominantly Mediterranean marbles have been used, but there are also some marble occurrences in the eastern Alpine regions that were exploited in those times. Besides a mineralogical–petrographic analysis, grain‐size evaluation in particular, and the determination of carbon and oxygen isotopes allow an effective characterization of the Faschendorf materials. Their provenance from the Gummern Marble complex in Carinthia is very likely.     

OLDOWAN RAW MATERIAL PROCUREMENT AND USE: EVIDENCE FROM THE KOOBI FORA FORMATION*

Raw material availability has been shown to be a major factor affecting the material culture of Oldowan tool users. Studies of artefact provenance often focus on site‐specific raw material availability. Here, we use data from primary and secondary sources of raw material to develop a model of basin‐scale stone availability in the eastern Turkana Basin, during the KBS and Okote Members of the Koobi Fora Formation. ED‐XRF was used as a method of characterizing raw material sources and artefacts using trace elements. This model is applied to the site of FxJj 50 to investigate transport and discard patterns.     

CHARACTERIZATION OF THE AMPHORAE,STONE BALLAST AND STOWAGE MATERIALS OF THE SHIPS FROM THE ARCHAEOLOGICAL SITE OF PISA–SAN ROSSORE,ITALY: INFERENCES ON THEIR PROVENANCE AND POSSIBLE TRADING ROUTES*

In December 1998, during excavation for the construction of a new building near San Rossore railway station in Pisa, the remains of ancient ships were discovered. These findings have been dated (radiocarbon) to between the end of the 10th century bc and the fifth century ad ( Belluomini et al. 2002 ). Several transport amphorae belonging to the Hellenistic ship, samples of rocks (stone ballast) belonging to ships B, D and the Hellenistic ship, and stowage materials belonging only to ship B have been analysed. The mineralogical and petrographic data of the investigated samples provided information on the possible provenance of the raw materials utilized in the manufacture of the ceramic amphorae, as well as on the provenance of the rock materials found in the ships as ballast and stowage. The compositional data (obtained through XRD, XRF, OM and EPMA) and their statistical analyses suggest that the provenance of the Dressel amphorae belonging to the Hellenistic ship was the Middle Tyrrhenian coast of Italy, and more precisely the area between Tarquinia and Naples, according to the numerous kilns and wine production sites found in this area. The provenance of the volcanic rocks was from southern Tuscany, northern Latium and possibly the Pontine Islands, whereas the intrusive rock possibly comes from the Calabrian–Tyrrhenian coast and/or the Peloritani area. The impure limestones and the dolostone come from southern Tuscany and the Latium coast; the semi‐metamorphic rocks could come from the coast of southern Tuscany, the Tuscan Archipelago or possibly also from the Ligurian coast; only the sample of mylonitized granitoid possibly comes from either the Calabria–Peloritani arc or the Tuscan Archipelago. The stowage materials, consisting of lapilli and scoria of a pyroclastic nature, are sourced from the Neapolitan area. These data might shed some light on the centres of production of the amphorae and of the trading routes followed by the ships, according to the ports of call.     

NEUTRON TOMOGRAPHIC ASSESSMENT OF INCISIONS ON PREHISTORIC STONE SLABS: A CASE STUDY FROM WONDERWERK CAVE,SOUTH AFRICA*

This study presents the application of neutron tomography to the analysis of ironstone slabs found in a late Earlier Stone Age context (Fauresmith industry) at the back of Wonderwerk Cave, Northern Cape Province, South Africa. These slabs have markings on the surface that might be anthropogenic, and thus significant to understanding the emergence of human symbolic behaviour. Neutron tomography proved to be an effective tool for distinguishing surface incisions from lines that are the expression of internal fissures in the rock.