Chemical and isotopic signatures of Na/HCO3/CO2‐rich geofluids,North Portugal

Geochemical and isotopic studies have been undertaken to assess the origin of CO₂‐rich waters issuing in the northern part of Portugal. These solutions are hot (76°C) to cold (17°C) Na–HCO₃ mineral waters. The δ²H and δ¹⁸O signatures of the mineral waters reflect the influence of altitude on meteoric recharge. The lack of an ¹⁸O‐shift indicates there has been no high temperature water–rock interaction at depth, corroborating the results of several chemical geothermometers (reservoir temperature of about 120°C). The low ¹⁴C activity (up to 9.9 pmC) measured in some of the cold CO₂‐rich mineral waters (total dissolved inorganic carbon) is incompatible with the presence of ³H (from 1.7 to 4.1 TU) in those waters, which indicates relatively short subsurface circulation times. The δ¹³C values of CO₂ gas and dissolved inorganic carbon range between ?6‰ and ?1‰ versus Vienna‐Peedee Belemnite, indicating that the total carbon in the recharge waters is being diluted by larger quantities of CO₂ (¹⁴C‐free) introduced from deep‐seated (upper mantle) sources, masking the ¹⁴C‐dating values. The differences in the ⁸⁷Sr/⁸⁶Sr ratios of the studied thermal and mineral waters seem to be caused by water–rock interaction with different granitic rocks. Chlorine isotope signatures (?0.4‰ < δ³⁷Cl < +0.4‰ versus standard mean ocean chloride) indicate that Cl in these waters could be derived from mixing of a small amount of igneous Cl from leaching of granitic rocks.     

Fluid circulation related to post‐Messinian extension,Thassos Island,North Aegean

In the North Aegean Domain, Thassos Island contains a Plio‐Pleistocene basin controlled by a large‐scale flat‐ramp extensional system with a potential décollement located at depth within a marble unit. Numerous mineralizations associated with normal faults of Plio‐Pleistocene age are the sign of fluid circulation during extension. Two main generations of fluid flow are recognized, related to Plio‐Pleistocene extension. A first circulation under high‐temperature conditions (about 100–200°C) resulted in dolomitization of marbles near the base of the Plio‐Pleistocene basin. The dolomites are characterized by low δ¹⁸O values (down to 11‰ versus Standard Mean Ocean Water). Some cataclastic deformation affected the dolomites. Hydrothermal quartz that crystallized in extension veins above a blind ramp also has low δ¹⁸O values (about 13‰). This shows that high‐temperature fluids moved up from the décollement level toward the surface. A second downward circulation of continental waters at near‐surface temperature is documented by calcite veins in fault zones and at the base of the Plio‐Pleistocene basin. These veins have O isotope values relatively constant at about 23–25‰ and C isotope values intermediate between the high δ¹³C value of the carbonate host rock (about 1–3‰ versus Peedee Belemnite) and the low δ¹³C value of soil‐derived carbon (?10‰). The calcites associated with the oxidative remobilization of primary sulphide Zn–Pb mineralization of Thassos carbonates have comparable O and C isotope compositions. Hot fluids, within the 100–200°C temperature range, have likely contributed to the weakening of the lower marble unit of Thassos and, thus, to the process of décollement.     

Geochemical fingerprinting of hydraulic fracturing fluids from Qusaiba Hot Shale and formation water from Paleozoic petroleum systems,Saudi Arabia

Provenance studies of produced water are essential to trace flow dynamics and reservoir compartmentalization in petroleum systems and to quantify fluid recovery rates from unconventional fracturing. Produced water from a hydraulically fractured well in the Qusaiba Hot Shale in the Northern Exploration Area, Saudi Arabia, was daily monitored and analyzed for water chemistry, and environmental (δ²H, δ¹³C, δ¹⁸O_H2O, δ¹⁸O_SO4, δ³⁴S_SO4, δ³⁷Cl, ⁸⁷Sr/⁸⁶Sr) and cosmogenic isotopes (³H, ¹⁴C, ³⁶Cl), to differentiate from reference fluids of supply water, fracturing fluids, and formation water from adjacent Paleozoic units. Initially, recovered water is composed of fracturing fluids and subsequently replaced by a homogeneous cut of pristine formation water. Formation water is composed of dominant meteoric water (approximately 84 vol%) and minor fossil evaporated seawater. The young ¹⁴C‐apparent age between 6000 and 6700 years BP and depleted δ¹⁸O/δ²H values for the meteoric component confirm the infiltration of surface water into the Qusaiba Hot Shale interval or adjacent units during the Early Holocene Pluvial Period under cooler and wetter climatic conditions than present, which suggest the presence of a very recent, dynamic hydraulic flow system. ³⁶Cl/Cl ratios between 102 × 10^?15 and 31 × 10^?15 are ambiguous and can be attributed to atmospheric recharge close to the coast, mixing of ³⁶Cl‐enriched Quaternary meteoric recharge with ³⁶Cl‐depleted fossil seawater, and/or hypogene production by U‐Th‐enriched host rock. Produced waters from Qusaiba Hot Shale are within the compositional range of Na‐Cl‐type formation water from Paleozoic reservoir units in northern Saudi Arabia with salinities from 30 000 to 130 000 mg l^?1. As a novel technological approach for exploration wells in Northern Saudi Arabia, multi‐isotopic methods were successfully implemented to quantify flowback volumes from hydraulic fracturing, and to fingerprint pristine formation water or pore water in Paleozoic systems on their provenance, residence time, migration pathways, and secondary alteration processes.     

Contrasting paleofluid systems in the continental basement: a fluid inclusion and stable isotope study of hydrothermal vein mineralization,Schwarzwald district,Germany

An integrated fluid inclusion and stable isotope study was carried out on hydrothermal veins (Sb‐bearing quartz veins, metal‐bearing fluorite–barite–quartz veins) from the Schwarzwald district, Germany. A total number of 106 Variscan (quartz veins related to Variscan orogenic processes) and post‐Variscan deposits were studied by microthermometry, Raman spectroscopy, and stable isotope analysis. The fluid inclusions in Variscan quartz veins are of the H₂O–NaCl–(KCl) type, have low salinities (0–10 wt.% eqv. NaCl) and high T_h values (150–350°C). Oxygen isotope data for quartz range from +2.8‰ to +12.2‰ and calculated δ¹⁸O_H2O values of the fluid are between ?12.5‰ and +4.4‰. The δD values of water extracted from fluid inclusions vary between ?49‰ and +4‰. The geological framework, fluid inclusion and stable isotope characteristics of the Variscan veins suggest an origin from regional metamorphic devolatilization processes. By contrast, the fluid inclusions in post‐Variscan fluorite, calcite, barite, quartz, and sphalerite belong to the H₂O–NaCl–CaCl₂ type, have high salinities (22–25 wt.% eqv. NaCl) and lower T_h values of 90–200°C. A low‐salinity fluid (0–15 wt.% eqv. NaCl) was observed in late‐stage fluorite, calcite, and quartz, which was trapped at similar temperatures. The δ¹⁸O values of quartz range between +11.1‰ and +20.9‰, which translates into calculated δ¹⁸O_H2O values between ?11.0‰ and +4.4‰. This range is consistent with δ¹⁸O_H2O values of fluid inclusion water extracted from fluorite (?11.6‰ to +1.1‰). The δD values of directly measured fluid inclusion water range between ?29‰ and ?1‰, ?26‰ and ?15‰, and ?63‰ and +9‰ for fluorite, quartz, and calcite, respectively. Calculations using the fluid inclusion and isotope data point to formation of the fluorite–barite–quartz veins under near‐hydrostatic conditions. The δ¹⁸O_H2O and δD data, particularly the observed wide range in δD, indicate that the mineralization formed through large‐scale mixing of a basement‐derived saline NaCl–CaCl₂ brine with meteoric water. Our comprehensive study provides evidence for two fundamentally different fluid systems in the crystalline basement. The Variscan fluid regime is dominated by fluids generated through metamorphic devolatilization and fluid expulsion driven by compressional nappe tectonics. The onset of post‐Variscan extensional tectonics resulted in replacement of the orogenic fluid regime by fluids which have distinct compositional characteristics and are related to a change in the principal fluid sources and the general fluid flow patterns. This younger system shows remarkably persistent geochemical and isotopic features over a prolonged period of more than 100 Ma.     

Iron mineralization and dolomitization in the Paran Fault zone,Israel: implications for low‐temperature basinal fluid processes near the Dead Sea Transform

Petrography, Eh‐pH calculations and the stable isotope composition of oxygen are used to interpret geochemical processes that occurred during iron oxide mineralization and dolomitization along the Menuha Ridge segment of the Paran Fault, southern Israel, adjacent to the Dead Sea Transform (DST). Iron mineralization is strongly localized in the fault zone as ferruginous lenses, whereas Fe dolomitization spreads laterally into the Cenomanian‐Turonian carbonate host rock as stratabound beds. The average oxygen isotope fractionation between syngenetic quartz and iron oxides in the ferruginous lenses gives a temperature of 50 ± 10°C and δ¹⁸O SMOW water = ?3.5‰; consistent with an origin from metalliferous groundwater flow in the sedimentary basin. Ferroan dolomite initially formed under strongly reducing conditions, but this was followed by oxidation and pseudomorphic replacement of the dolomite by a mesh of fine‐grained iron oxides (simple zoned dolomites). This cycle of ferroan dolomite formation and replacement by iron oxides was repeated in complex zoned dolomites. Dolomite oxygen isotope compositions fall into two groups: a high δ¹⁸O group corresponding to the simple zoned dolomites and non‐ferroan dolomites and a low δ¹⁸O group corresponding to the complex zoned dolomites. Water‐rock calculations suggest that the epignetic dolomites formed under fluid‐buffered conditions: the high δ¹⁸O group are indicated to have formed at temperatures of ca. 25°C for waters with δ¹⁸O = ?4 to 0‰; the low δ¹⁸O complex zoned dolomites at 50–75°C for waters with the same isotopic composition. A kinetic calculation for a complex zoned dolomite‐bearing bed indicates that dolomitization must have occurred at high values of the dolomite saturation index. This requirement for high Mg supersaturation and the indication that epigenetic dolomitization is more protracted in stratigraphically deeper formations located closer to the DST is consistent with models proposing that Mg‐rich solutions originated in the Dead Sea Rift.     

Transformation of deep‐water methane bubbles into hydrate

This study focuses on the mechanics of methane bubble phase behavior in the gas hydrate stability zone. The transformation of deep‐water methane bubbles into solid hydrate was investigated in Lake Baikal in situ. After being released from the lake bottom, methane bubbles were caught by different traps with transparent walls. When bubbles entered the internal spaces of the traps, the bubbles could be transformed into two different solid hydrate structures depending on the ambient conditions. The first structure was hydrate granular matter consisting of solid fragments with sizes on the order of 1 mm. The second structure was a highly porous solid foam consisting of solid bubbles with sizes on the order of 5 mm. The granular matter did not change as it was brought up to the top border of the gas hydrate stability zone, whereas in the solid foam, free methane rapidly exsolved from the sample during depressurization. We conclude that the decrease in depth and the decrease in the bubble flux rate were key factors in the formation of the hydrate granular matter, whereas the increase in the depth of bubble sampling and the increase in the bubble flux rate facilitated the conversion of bubbles into a highly porous solid hydrate foam.     

Syntectonic infiltration by meteoric waters along the Sevier thrust front,southwest Montana

Structural, petrographic, and isotopic data for calcite veins and carbonate host‐rocks from the Sevier thrust front of SW Montana record syntectonic infiltration by H₂O‐rich fluids with meteoric oxygen isotope compositions. Multiple generations of calcite veins record protracted fluid flow associated with regional Cretaceous contraction and subsequent Eocene extension. Vein mineralization occurred during single and multiple mineralization events, at times under elevated fluid pressures. Low salinity (T_m = ?0.6°C to +3.6°C, as NaCl equivalent salinities) and low temperature (estimated 50–80°C for Cretaceous veins, 60–80°C for Eocene veins) fluids interacted with wall‐rock carbonates at shallow depths (3–4 km in the Cretaceous, 2–3 km in the Eocene) during deformation. Shear and extensional veins of all ages show significant intra‐ and inter‐vein variation in δ¹⁸O and δ¹³C. Carbonate host‐rocks have a mean δ¹⁸O_V‐SMOW value of +22.2 ± 3‰ (1σ), and both the Cretaceous veins and Eocene veins have δ¹⁸O ranging from values similar to those of the host‐rocks to as low as +5 to +6‰. The variation in vein δ¹³C_V‐PDB of ?1 to approximately +6‰ is attributed to original stratigraphic variation and C isotope exchange with hydrocarbons. Using the estimated temperature ranges for vein formation, fluid (as H₂O) δ¹⁸O calculated from Cretaceous vein compositions for the Tendoy and Four Eyes Canyon thrust sheets are ?18.5 to ?12.5‰. For the Eocene veins within the Four Eyes Canyon thrust sheet, calculated H₂O δ¹⁸O values are ?16.3 to ?13.5‰. Fluid–rock exchange was localized along fractures and was likely coincident with hydrocarbon migration. Paleotemperature determinations and stable isotope data for veins are consistent with the infiltration of the foreland thrust sheets by meteoric waters, throughout both Sevier orogenesis and subsequent orogenic collapse. The cessation of the Sevier orogeny was coincident with an evolving paleogeographic landscape associated with the retreat of the Western Interior Seaway and the emergence of the thrust front and foreland basin. Meteoric waters penetrated the foreland carbonate thrust sheets of the Sevier orogeny utilizing an evolving mesoscopic fracture network, which was kinematically related to regional thrust structures. The uncertainty in the temperature estimates for the Cretaceous and Eocene vein formation prevents a more detailed assessment of the temporal evolution in meteoric water δ¹⁸O related to changing paleogeography. Meteoric water‐influenced δ¹⁸O values calculated here for Cretaceous to Eocene vein‐forming fluids are similar to those previously proposed for surface waters in the Eocene, and those observed for modern‐day precipitation, in this part of the Idaho‐Montana thrust belt.     

Horticulturists and oxygen ecozones in the tropical and subtropical forests of Southeast South America

We analyse the isotopic values (δ¹³C, δ¹⁵N) of the diet of pre-Columbian horticulturalist populations from tropical and subtropical areas of southeastern South America, belonging to the Guarani and Taquara archaeological units. The data indicate different trends in each one (T?=?4.21; P?=?0.0004), showing a mixed diet with maize consumption in the Guarani samples (δ¹³C_co?=??15.5?±?1.8‰; δ¹³C_ap ?10.4?±?0.8‰) and a depleted one in the Taquara ones (δ¹³C_co ?18.2?±?1.7‰; δ¹³C_ap ?11.9?±?0.9‰), with a significant internal dispersion in both populations. The first population has higher nitrogen values (δ¹⁵N 11.1?±?0.6‰) compared to the Taquara samples (δ¹⁵N 9.3?±?1‰), suggesting a more carnivorous diet. The recognition of these pre-Columbian mixed diets involves the identification of maize cultivation on the Atlantic side of the southernmost area of South America (Parana Delta, 34° SL). Through the analysis of δ¹⁸O we have identified two isotopic ecozones, the first along the Paraná River Valley, with an average value of δ¹⁸O ?3.7?±?0.5‰ (CV?=?13.5%; CI?=??3.83 / ?3.16), and the second one, located in the Planalto of southern Brazil (Araucaria Forest), with a mean value of δ¹⁸O ?1.5?±?0.3‰ (CV?=?16.5%; CI?=??1.69 / ?1.29). The isotopic data (δ¹³C, δ¹⁵N and δ¹⁸O) suggest human movements between these two ecozones.     

Geochemistry and origin of natural gases dissolved in brines from gas fields in southwest Japan

Previous geochemical studies indicated that most natural gases dissolved in brines in Japan are of microbial origin, consisting of methane produced via carbonate reduction. However, some of those from gas fields in southwest Japan contain methane relatively enriched in ¹³C, whose origin remains to be clarified. To address this issue, chemical and isotopic analyses were performed on natural gases and brines from the gas fields in Miyazaki and Shizuoka prefectures, southwest Japan. Methane isotopic signatures (δ¹³C ≈ ?68‰ to ?34‰ VPDB; δ²H ≈ ?183‰ to ?149‰ VSMOW) suggest that these gases are of microbial (formed via carbonate reduction) or of mixed microbial and thermogenic origin. The relatively high δ²H‐CH₄ values and their relationship with the δ²H‐H₂O values argue against the possibility of their formation via acetate fermentation. The δ¹³C‐CO₂ values (≈?5‰), together with the slope of the correlation between δ²H‐CH₄ and δ¹³C‐CH₄ (Δδ²H‐CH₄/Δδ¹³C‐CH₄ ≈ 1), contradict the possibility of their formation via carbonate reduction followed by partial oxidation by methanotrophs. The ³He/⁴He ratios of the gases from Miyazaki (≈0.11–1.3 Ra) and their low correlation with δ¹³C‐CH₄ values do not support an abiogenic origin. It is inferred therefore that the high δ¹³C‐CH₄ values of natural gases dissolved in brines from gas fields in southwest Japan are indications of the contribution of thermogenic hydrocarbons, although whether abiogenic hydrocarbons contribute significantly to the gases from Shizuoka requires further investigation. This study has clarified that, for the future exploration of natural gases in southwest Japan, we should adopt the strategies for conventional thermogenic gas accumulations, such as checking the content, type and maturity of organic matter in the underlying sedimentary rocks.     

Geophysical signatures associated with fluid flow and gas hydrate occurrence in a tectonically quiescent sequence,Qiongdongnan Basin,South China Sea

Interpretation of high‐resolution two‐dimensional (2D) and three‐dimensional (3D) seismic data collected in the Qiongdongnan Basin, South China Sea reveals the presence of polygonal faults, pockmarks, gas chimneys and slope failure in strata of Pliocene and younger age. The gas chimneys are characterized by low‐amplitude reflections, acoustic turbidity and low P‐wave velocity indicating fluid expulsion pathways. Coherence time slices show that the polygonal faults are restricted to sediments with moderate‐amplitude, continuous reflections. Gas hydrates are identified in seismic data by the presence of bottom simulating reflectors (BSRs), which have high amplitude, reverse polarity and are subparallel to seafloor. Mud diapirism and mounded structures have variable geometry and a great diversity regarding the origin of the fluid and the parent beds. The gas chimneys, mud diapirism, polygonal faults and a seismic facies‐change facilitate the upward migration of thermogenic fluids from underlying sediments. Fluids can be temporarily trapped below the gas hydrate stability zone, but fluid advection may cause gas hydrate dissociation and affect the thickness of gas hydrate zone. The fluid accumulation leads to the generation of excess pore fluids that release along faults, forming pockmarks and mud volcanoes on the seafloor. These features are indicators of fluid flow in a tectonically‐quiescent sequence, Qiongdongnan Basin. Geofluids (2010) 10 , 351–368     

Stable nitrogen isotope values in arid‐land kangaroos correlated with mean annual rainfall: potential as a palaeoclimatic indicator

Bone collagen stable nitrogen isotope values are reported for modern kangaroos (Macropus spp.) from eight field sites along a 1160 km south–north transect from temperate coastal to arid interior South Australia, in order to investigate δ¹⁵N tissue variability in relation to rainfall and relative humidity. Mean annual rainfall along the transect ranges from 775 mm at Mount Gambier in the southeastern coast to 176 mm at Innamincka in the arid northern interior, while 3pm relative humidity ranges from 73% at coastal Flinders Chase to 36% at Innamincka. In arid habitats (176–238 mm rainfall), the δ¹⁵N values of kangaroo bone collagen become more positive in relation to decreasing mean annual rainfall (r² = 0.98), while there is only a weak correlation with relative humidity (r² = 0.67). In contrast, in temperate and semi‐arid coastal habitats (350–775 mm), there is no correlation between kangaroo bone collagen δ¹⁵N values and rainfall (r² = 0.0011) or between δ¹⁵N values and relative humidity (r² = 0.0035). Thus, in South Australia, kangaroo bone collagen δ¹⁵N values do not show a simple linear correlation with either rainfall or relative humidity across all habitats. These results suggest that stable nitrogen isotope analyses of herbivore bones obtained from archaeological and palaeontological sites may provide a reliable proxy for past rainfall values in arid‐land ecosystems. Copyright © 2007 John Wiley & Sons, Ltd.     

A comprehensive review of hydrocarbons and genetic model of the sandstone‐hosted Dongsheng uranium deposit,Ordos Basin,China

The Dongsheng uranium deposit, the largest in situ leach uranium mine in the Ordos Basin, geometrically forms a roll‐front type deposit that is hosted in the Middle Jurassic Zhiluo Formation. The genesis of the mineralization, however, has long been a topic of great debate. Regional faults, epigenetic alterations in surface outcrops, natural oil seeps, and experimental findings support a reducing microenvironment during ore genesis. The bulk of the mineralization is coffinite. Based on thin‐section petrography, some of the coffinite is intimately intergrown with authigenic pyrite (ore‐stage pyrite) and is commonly juxtaposed with some late diagenetic sparry calcite (ore‐stage calcite) in primary pores, suggesting simultaneous precipitation. Measured homogenization temperatures of greater than 100°C from fluid inclusions indicate circulation of low‐temperature hydrothermal fluids in the ore zone. The carbon isotopic compositions of late calcite cement (δ¹³C_VPDB = ?31.0 to ?1.4‰) suggest that they were partly derived from sedimentary organic carbon, possibly from deep‐seated petroleum fluids emanating from nearby faults. Hydrogen and oxygen isotope data from kaolinite cement (δD = ?133 to ?116‰ and δ¹⁸O_SMOW = 12.6–13.8‰) indicate that the mineralizing fluids differed from magmatic and metamorphic fluids and were more depleted in D (²H) than modern regional meteoric waters. Such a strongly negative hydrogen isotopic signature suggests that there has been selective modification of δD by CH₄±H₂S±H₂ fluids. Ore‐stage pyrite lies within a very wide range of δ³⁴S (?39.2 to 26.9‰), suggesting that the pyrite has a complex origin and that bacterially mediated sulfate reduction cannot be precluded. Hydrocarbon migration and its role in uranium reduction and precipitation have here been unequivocally defined. Thus, a unifying model for uranium mineralization can be established: Early coupled bacterial uranium mineralization and hydrocarbon oxidation were followed by later recrystallization of ore phases in association with low‐temperature hydrothermal solutions under hydrocarbon‐induced reducing conditions.     

Origin of palaeofluids in a normal fault setting in the Aegean region

The province of Burdur (SW Turkey) is seismically an active region. A structural, geochronological, petrographical, geochemical and fluid inclusion study of extension veins and fault‐related calcite precipitates has been undertaken to reconstruct the palaeofluid flow pattern in this normal fault setting in the Aegean region. A palaeostress analysis and U/Th dating of the precipitates reveals the neotectonic significance of the sampled calcites. Fluid inclusion microthermometry of calcites‐filling extension veins shows final melting temperatures (T_m ice) of 0°C. This indicates pure water, most likely of meteoric origin. The oxygen isotope values (?9.8‰ to ?6.5‰ VPDB) and the carbon isotopic composition (?10.4‰ to ?2.9‰ VPDB) of these calcites also show a near‐surface meteoric origin of the fluid responsible for precipitation. The microstructural characteristics of fault‐related calcites indicate that calcite precipitation was linked with fault activity. Final melting temperature of fault‐related calcites ranges between 0 and ?1.9°C. The oxygen isotope values show a broad range between ?15.0‰ and ?2.2‰ VPDB. Several of these calcites have a δ¹⁸O composition that is higher or lower than the oxygen isotopic composition of meteoric calcites in the area (i.e. between ?10‰ and ?6‰ VPDB). The δ¹³C composition largely falls within the range of the host limestones and reflects a rock‐buffered system. Microthermometry and stable isotopic study indicate a meteoric origin of the fluids with some degree of water–rock interaction or mixing with another fluid. Temperatures deduced from microthermometry and stable isotope analyses indicate precipitation temperatures around 50°C. These higher temperatures and the evidence for water–rock interaction indicate a flow path long enough to equilibrate with the host–rock limestone and to increase the temperature. The combined study of extension vein‐ and fault‐related calcite precipitates enables determining the origin of the fluids responsible for precipitation in a normal fault setting. Meteoric water infiltrated in the limestones to a depth of at least 1 km and underwent water–rock interaction or mixing with a residual fluid. This fluid was, moreover, tapped during fault activity. The extension veins, on the contrary, were passively filled with calcites precipitating from the downwards‐migrating meteoric water.     

Fluid inclusion and stable isotope constraints on the genesis of the Jian copper deposit,Sanandaj–Sirjan metamorphic zone,Iran

The Jian copper deposit, located on the eastern edge of the Sanandaj–Sirjan metamorphic zone, southwest of Iran, is contained within the Surian Permo‐Triassic volcano‐sedimentary complex. Retrograde metamorphism resulted in three stages of mineralization (quartz ± sulfide veins) during exhumation of the Surian metamorphic complex (Middle Jurassic time; 159–167 Ma), and after the peak of the metamorphism (Middle to Late Triassic time; approximately 187 Ma). The early stage of mineralization (stage 1) is related to a homogeneous H₂O–CO₂ (XCO₂ > 0.1) fluid characterized by moderate salinity (<10 wt.% NaCl equivalent) at high temperature and pressure (>370°C, >3 kbar). Early quartz was followed by small amounts of disseminated fine‐grained pyrite and chalcopyrite. Most of the main‐ore‐stage (stage 2) minerals, including chalcopyrite, pyrite and minor sphalerite, pyrrhotite, and galena, precipitated from an aqueous‐carbonic fluid (8–18 wt.% NaCl equivalent) at temperatures ranging between 241 and 388°C during fluid unmixing process (CO₂ effervescence). Fluid unmixing in the primary carbonaceous fluid at pressures of 1.5–3 kbar produced a high XCO₂ (>0.05) and a low XCO₂ (<0.01) aqueous fluid in ore‐bearing quartz veins. Oxygen and hydrogen isotope compositions suggest mineralization by fluids derived from metamorphic dehydration (δ¹⁸O_fluid = +7.6 to +10.7‰ and δD = ?33.1 to ?38.5‰) during stage 2. The late stage (stage 3) is related to a distinct low salinity (1.5–8 wt.% NaCl equivalent) and temperatures of (120–230°C) aqueous fluid at pressures below 1.5 kbar and the deposition of post‐ore barren quartz veins. These fluids probably derived from meteoric waters, which circulated through the metamorphic pile at sufficiently high temperatures and acquire the characteristics of metamorphic fluids (δ¹⁸O_fluid = +4.7 to +5.1‰ and δD = ?52.3 to ?53.9‰) during waning stages of the postearly Cimmerian orogeny in Surian complex. The sulfide‐bearing quartz veins are interpreted as a small‐scale example of redistribution of mineral deposits by metamorphic fluids. This study suggests that mineralization at the Jian deposit is metamorphogenic in style, probably related to a deep‐seated mesothermal system.     

On the geochemistry of gases and noble gas isotopes (including 222Rn) in deep crustal fluids: the 4000 m KTB-pilot hole fluid production test 2002–03

The concentrations of H₂, O₂, CO₂, and concentrations and isotopic composition of the noble gases (including ²²²Rn), N₂, CH₄, and higher hydrocarbons dissolved in 4000 m deep‐seated fluids from a 12‐month fluid production test in the KTB pilot hole were analyzed. This determination of the gas geochemistry during the test in combination with the knowledge of the hydraulic data provides relevant information about the fluid hydraulics of the deep system. All gas concentrations and isotopic signatures, except for ²²²Rn, showed constancy during the course of the test. This, in combination with large fluid flow rates at a moderate water table drawdown, imply an almost infinite fluid reservoir in 4000 m depth. From the change in ²²²Rn‐activity as a function of pump rate, the contribution of smaller and wider pores to the overall fluid flow in an aquifer can be deduced. This ²²²Rn‐activity monitoring proved therefore to be a valuable instrument for the qualitative observation of the scavenging of pore and fracture surfaces, a hydraulic feature invisible to standard hydraulic testing tools. The observance of this scavenging effect is due to (i) the continuous on‐line geochemical monitoring, (ii) the durability of the test, (iii) a change in pump rate during the course of the test, and (iv) due to the short half‐life of ²²²Rn. The fluids have a 5.9% mantle He component, and a δ²¹Ne excess of 14%, and a noble gas model age of about (5.5–6.2) ± 2.0 Myr. The mean N₂/Ar‐ratio of 516 and δ¹⁵N‐data of about +1.5‰ indicates sedimentary or metamorphic origin of N₂. The hydrocarbons, amounting to 33 vol.% in the gas phase, are derived from thermal decomposition of marine organic matter of low maturity. But a key question, the identification of the potential source region of the fluids and the migration pathway, is still unidentified.     

Temperature‐dependent Li isotope ratios in Appalachian Plateau and Gulf Coast Sedimentary Basin saline water

Lithium (Li) concentrations of produced water from unconventional (horizontally drilled and hydraulically fractured shale) and conventional gas wells in Devonian reservoirs in the Appalachian Plateau region of western Pennsylvania range from 0.6 to 17 mmol kg^?1, and Li isotope ratios, expressed as in δ⁷Li, range from +8.2 to +15‰. Li concentrations are as high as 40 mmol kg^?1 in produced waters from Plio‐Pleistocene through Jurassic‐aged reservoirs in the Gulf Coast Sedimentary Basin analyzed for this study, and δ⁷Li values range from about +4.2 to +16.6‰. Because of charge‐balance constraints and rock buffering, Li concentrations in saline waters from sedimentary basins throughout the world (including this study) are generally positively correlated with chloride (Cl), the dominant anion in these fluids. Li concentrations also vary with depth, although the extent of depth dependence differs among sedimentary basins. In general, Li concentrations are higher than expected from seawater or evaporation of seawater and therefore require water–mineral reactions that remove lithium from the minerals. Li isotope ratios in these produced waters vary inversely with temperature. However, calculations of temperature‐dependent fractionation of δ⁷Li between average shale δ⁷Li (?0.7‰) and water result in δ⁷Li_water that is more positive than that of most produced waters. This suggests that aqueous δ⁷Li may reflect transport of water from depth and/or reaction with rocks having δ⁷Li lighter than average shale.     

Migration of metamorphic CO2 into a coal seam: a natural analog study to assess the long‐term fate of CO2 in Coal Bed Carbon Capture,Utilization, and Storage Projects

This study assesses the displacement of coalbed methane by CO₂ migration along a fault into the coal seam in the Yaojie coalfield. Coal and gas samples were collected continuously at various distances in NO.2 coal seam from F19 fault. Vitrinite reflectance, maceral, and pore distributions and proximate analysis of fourteen coal samples were performed. Gas components, concentrations, carbon isotopes of 28 gas samples were determined. We examined the coal–gas trace characteristics of coalbed methane displaced away from the fault by CO₂ injection after geological ages. From east to west, away from the F19 fault, the CO₂ concentration decreased, whereas the CH₄ concentration increased gradually. The δ¹³C values for CO₂ varied between ?9.94‰ and 1.12‰, suggesting a metamorphic origin. A wider range of values (from ?9.94‰ to 20‰) was associated with the mixing of microbial carbon dioxide, isotopic fractionation during CO₂ migration through the microporous structures of coals, and/or carbon isotope fractionation during gas–water exchange and dissolution of CO₂. Away from the F19 fault, the volumes of micropores, mesopores and macropores decrease gradually. The Dubinin–Radushkevich (DR) micropore volume decreased from 0.0059 to 0.0037 cm³ g^‐1, and the mesopore and macropore volumes decreased from 0.066 to 0.026 cm³ g^‐1. The CO₂ injection can mobilize aromatic hydrocarbons and mineral matter from coal matrix, resulting in the decrease in the absorption peak intensity for coal samples after supercritical CO₂ treatment, which indicates that chemical reactions occur between coal and CO₂, not only physical adsorption.     

Addressing data comparability in the creation of combined data sets of bioapatite carbon and oxygen isotopic compositions

Before amalgamating published isotope data, comparability should be demonstrated. This paper compares carbon and oxygen isotopic compositions of 30 enamel samples measured by two laboratories. The aims were to see what, if any, isotopic variation was observed, to determine the causes as needed and to correct if possible. Bioapatite was acidified at 90°C in 2006 and at 26°C in 2017, while δ values were corrected via one‐point normalization in 2006 and by two‐point normalization in 2017. One case (of the 30) produced different δ values between the analysis dates, suggesting contamination. Repeated carbon isotope ratio measurements were not meaningfully different. Repeated oxygen isotope ratio measurements were significantly different, even following correction for acid‐carbonate fractionation at different temperatures and the renormalization of 2017 δ values using one point; however, differences were not meaningful for interpretations. Results were used to calculate real interpretative differences (RIDs) for comparing enamel bioapatite as 0.6‰ for δ¹³C values and as 1.6‰ for δ¹⁸O values.     

Invasion of a karst aquifer by hydrothermal fluids: evidence from stable isotopic compositions of cave mineralization

Mineral deposits in the Cupp‐Coutunn/Promeszutochnaya cave system (Turkmenia, central Asia) record a phase of hydrothermal activity within a pre‐existing karstic groundwater conduit system. Hydrothermal fluids entered the caves through fault zones and deposited sulphate, sulphide and carbonate minerals under phreatic conditions. Locally, intense alteration of limestone wall rocks also occurred at this stage. Elsewhere in the region, similar faults contain economic quantities of galena and elemental sulphur mineralization. Comparisons between the Pb and S isotope compositions of minerals found in cave and ore deposits confirm the link between economic mineralization and hydrothermal activity at Cupp‐Coutunn. The predominance of sulphate mineralization in Cupp‐Coutunn implies that the fluids were more oxidized in the higher permeability zone associated with the karst aquifer. A slight increase in the δ³⁴S of sulphate minerals and a corresponding δ³⁴S decrease in sulphides suggest that partial isotopic equilibration occurred during oxidation. Carbonate minerals indicate that the hydrothermal fluid was enriched in ¹⁸O (δ¹⁸O_SMOW ～ + 10‰) relative to meteoric groundwater and seawater. Estimated values for δ¹³C_DIC (δ¹³C_PDB ～ ? 13‰) are consistent with compositions expected for dissolved inorganic carbon (DIC) derived from the products of thermal decomposition of organic matter and dissolution of marine carbonate. Values derived for δ¹³C_DIC and δ¹⁸O_water indicate that the hydrothermal fluid was of basinal brine origin, generated by extensive water–rock interaction. Following the hydrothermal phase, speleothemic minerals were precipitated under vadose conditions. Speleothemic sulphates show a bimodal sulphur isotope distribution. One group has compositions similar to the hydrothermal sulphates, whilst the second group is characterized by higher δ³⁴S values. This latter group may either record the effects of microbial sulphate reduction, or reflect the introduction of sulphate‐rich groundwater generated by the dissolution of overlying evaporites. Oxygen isotope compositions show that calcite speleothems were precipitated from nonthermal groundwater of meteoric origin. Carbonate speleothems are relatively enriched in ¹³C compared to most cave deposits, but can be explained by normal speleothem‐forming processes under thin, arid‐zone soils dominated by C4 vegetation. However, the presence of sulphate speleothems, with isotopic compositions indicative of the oxidation of hydrothermal sulphide, implies that CO₂ derived by reaction of limestone with sulphuric acid (‘condensation corrosion’) contributed to the formation of ¹³C‐enriched speleothem deposits.     

Fluid inclusion and isotopic constraints on the origin of ore‐forming fluid of the Jinman–Liancheng vein Cu deposit in the Lanping Basin,western Yunnan,China

Extensive quartz–carbonate–Cu sulfide veins occur in clastic rocks and are spatially related to Paleocene granites in the western border of the Lanping Basin, western Yunnan, China. Abundant aqueous‐carbonic fluid inclusions occur in these veins but their origin is debated. In the Jinman–Liancheng deposit, individual primary inclusion groups contain either exclusively liquid‐rich inclusions (Gl), or coexisting liquid‐rich and vapor‐rich inclusions (Glv). Microthermometry and estimate of CO₂ content indicate that type Gl inclusions either have homogenization temperatures (Th) 238–263°C and contain c. 3.9–5.5 mole % CO₂, or have Th 178–222°C and contain c. 1.6–3.2 mole % CO₂. Type Glv inclusions are thought to represent samples of fluid unmixing that occurred at 183–218°C. At that time, the liquid phase in the unmixing fluid may contain c. 2.0–3.3 mole % CO₂. As such, the correlation of CO₂ content with Th for type Gl inclusions is thought to be caused by fluid unmixing with decreasing temperature and subsequent CO₂ escape. δ¹⁸O and δD values of the parent water mainly fall in the field below that of primary magmatic water, indicative of fluid derivation from degassed (in open system) magmatic water, with no contributions from basinal or meteoric water. Initial Sr isotopic compositions of hydrothermal carbonates suggest that the fluid was magmatic, probably derived from the Paleogene granites. δ¹³C_PDB values (?4‰ to ?7‰) of the hydrothermal carbonates and δ³⁴S_V‐CDT values of sulfides (mainly ?11‰ to +5‰) indicate that the carbon and sulfur can be derived from (degassed) magma and/or nonmagmatic sources. The CO₂‐rich and magmatic‐water‐derived fluid at Jinman–Liancheng differs from the CO₂‐poor and basinally derived fluid in sediment‐hosted stratiform Cu (SSC) deposits, which suggests that there are no genetic linkages between the vein Cu and SSC deposits in the Lanping Basin.